summaryrefslogtreecommitdiff
path: root/src/conf_mode/interfaces-bridge.py
AgeCommit message (Collapse)Author
2020-09-26ifconfig: mtu: disallow MTU < 1280 bytes when IPv6 is enabled on the interfaceChristian Poessinger
Using an MTU less then the required 1280 bytes (as per RFC) on an interface where IPv6 is not explicitly disabled by: - set interfaces ethernet eth1 ipv6 address no-default-link-local - not having any other IPv6 address configured Will now trigger a commit error via verify() instead of raising FileNotFoundError!
2020-09-22ifconfig: T2653: bond: bridge: ensure member interface is not a source-interfaceChristian Poessinger
As we already check that a bond/bridge member interface is not a member of any other bridge or bond, the check must be extended. We also need to ensure that the bond member interface is not used as a source-interface to pppoe, macsec, tunnel, pseudo-ethernet, vxlan interfaces.
2020-09-22ifconfig: T2653: move is_member() from vyos.vylidate to vyos.configdictChristian Poessinger
2020-08-31configd: T2582: add scripts to include list for daemonJohn Estabrook
2020-07-25ifconfig: T2653: make ifname an optional argument to get_interface_dict()Christian Poessinger
Further reduce the boiler-plate code to determine interface tag node or not. It can be passed into get_interface_dict() if explicitly required - else it is taken from the environment.
2020-07-25vyos.configdict: T2653: add new reusable helper node_changed()Christian Poessinger
This can be used to see if a tagNode has been changed. It will return a list of changed nodes.
2020-07-25bridge: ifconfig: T2653: move to get_config_dict()Christian Poessinger
The current VyOS CLI parser code written in Python contains a ton of duplicates which I can also hold myself accountable for - or maybe mainly me - depends on the angle of judge. While providing a new update() method in vyos.ifconfig.interfaces() this is extended for bridge interfaces in the derived bridge class. Signed-off-by: Christian Poessinger <christian@poessinger.com>
2020-05-29Merge pull request #439 from thomas-mangin/T2088-explicit-airbagChristian Poessinger
airbag :T2088: make airbag explicit
2020-05-29airbag: T2088: explicit enabling of the featureThomas Mangin
airbag must now be explicitly installed. the patch also allow to fully disables the installation of the logging code at setup (and not just installing and doing nothing)
2020-05-26dhcpv6-pd: T2506: add option to request specific prefix lengthChristian Poessinger
Some ISPs (e.g. Comcast) only delegate a /64 by default. You have to explicitly "ask" for a bigger (e.g. /60) prefix. This commit adds a CLI node to request a specific prefix length in the range 32 - 64. dhcpv6-options { prefix-delegation { length 60 } }
2020-05-26dhcpv6-pd: pppoe: T2506: restructure CLIChristian Poessinger
Rename the CLI nodes for prefix delegation from "dhcpv6-options delegate <interface>" to "dhcpv6-options prefix-delegation interface <interface>". The change is required to add the possibility to request for specific prefix sized via the CLI. That option was not possible with the old configuration tree.
2020-05-19dhcpv6-pd: T421: support ethernet based interfacesChristian Poessinger
Add support for prefix delegation when receiving the prefix via ethernet, bridge, bond, wireless.
2020-05-19configdict: T2372: interfaces must reuse interface_default_dataChristian Poessinger
This is to remove the amount of duplicated entries in dictionaries. It's one more part to move to a unified interface management.
2020-05-11bridge: T2449: set accept_ra=2 if ipv6 address autoconf or dhcpv6 is setJernej Jakob
To make SLAAC and DHCPv6 work when forwarding=1, accept_ra must be 2 (default for accept_ra is 1).
2020-05-04bridge: T2367: use simple 'ip addr flush' to flush member addressesJernej Jakob
We've already verified that all member interfaces don't have any addresses configured, so it should be safe to simply call 'ip addr flush' on them to flush the remaining addresses (e.g. IPv6 link-local)
2020-05-04bridge: T2241: disallow adding interfaces with addresses to bridgeJernej Jakob
2020-05-04bridge: T2241: cleanup verify sectionJernej Jakob
- use is_member function instead of checking config directly - rearrange to join 2 for loops into one - make error output more user friendly - replace .format with f-strings - split into lines less than ~80 characters long
2020-05-04bridge: T2241: use vyos.util get_bridge_member_config functionJernej Jakob
Was previously moved out of this script.
2020-05-02bridge: T2367: flush all addresses of member interfacesJernej Jakob
Any remaining addresses of an interface (e.g. IPv6 link-local) will be flushed when adding a member. A direct call to ip is necessary for interfaces not under the Interface class (e.g. vlan vif*)
2020-04-23interfaces: bridge: T2362: correct order of adding/deleting EUI64 addressesJernej Jakob
2020-04-23interfaces: T2362: add node to delete the default IPv6 link-local addressJernej Jakob
2020-04-23interfaces: T2362: allow setting multiple 'ipv6 address eui64'Jernej Jakob
2020-04-23interfaces: T2362: delete and re-add all EUI64 addresses if MAC has changedJernej Jakob
2020-04-23interfaces: T2362: add default IPv6 link-local address to make IPv6 workJernej Jakob
2020-04-23interfaces: T2362: split set_ipv6_eui64_address into add and del functionsJernej Jakob
2020-04-11dhcp: T2265: refactor DHCP classThomas Mangin
Break the code between v4 and v6, remove need for getter/setter as they are just exposing the underlying dict. Move FixedDict from tunnel code and expose it to other part so it can be used to prevent accidental change to the dhcp option if no default exists already.
2020-04-07bridge: T2232: prevent deletion of enslaved interfacesChristian Poessinger
Interfaces enslaved to a bridge are not allowed to be deleted. If an interface is deleted from the config but it is still enslaved to a bridge will cause a configuration error on the subsequent boot.
2020-03-28ipv6: T1831: migrate eui64 addressing to XML and pythonChristian Poessinger
2020-03-28ipv6: T1831: migrate autoconf nodeChristian Poessinger
Autoconfigure addresses using Prefix Information in Router Advertisements.
2020-03-28ipv6: T1831: use integers over bool in interface configurationChristian Poessinger
2020-03-28ipv6: T1831: migrate forwarding and dup-addr-detect-transmits nodesChristian Poessinger
... to new XML and Python based frontend/backend.
2020-03-28ifconfig: T2057: explicity name state functionsThomas Mangin
The Interface get_state/set_state were not clear about if they edited the admin or operational state. functions are now using admin_state and oper_state for clarity.
2020-03-24ifconfig: T2057: convert STP to adapterThomas Mangin
2020-03-23ifconfig: T31: convert all interface to set_vrf apiThomas Mangin
2020-03-06vrf: T31: enable vrf support for bridge interfaceChristian Poessinger
2020-03-03interfaces: T1579: fix c/p error when evaluating ↵Christian Poessinger
os.environ['VYOS_TAGNODE_VALUE'] This has been only a theoretical problem but then the error condition was triggered - only an error has been printed instead of raising an Exception.
2020-01-03ifconfig: T1939: provide abstraction for interface "ip" optionChristian Poessinger
Provide an XML/Python abstraction to * ip disable-arp-filter * ip enable-arp-accept * ip enable-arp-announce * ip enable-arp-ignore The old implementation can co-exist until the last interfaces have been migrated.
2019-11-02bridge: T1783: bugfix removal of member interfaceChristian Poessinger
Fix error when deleting a member with: delete interfaces bridge br0 member interface eth1 Traceback (most recent call last): File "/usr/libexec/vyos/conf_mode/interfaces-bridge.py", line 304, in <module> apply(c) File "/usr/libexec/vyos/conf_mode/interfaces-bridge.py", line 267, in apply br.del_port( intf['name'] ) TypeError: string indices must be integers
2019-10-13Sync XML interface description source file pattern and conf script nameChristian Poessinger
renamed: interface-bonding.py -> interfaces-bonding.py renamed: interface-bridge.py -> interfaces-bridge.py renamed: interface-dummy.py -> interfaces-dummy.py renamed: interface-ethernet.py -> interfaces-ethernet.py renamed: interface-loopback.py -> interfaces-loopback.py renamed: interface-openvpn.py -> interfaces-openvpn.py renamed: interface-vxlan.py -> interfaces-vxlan.py renamed: interface-wireguard.py -> interfaces-wireguard.py
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-23 03:54:42 +0000