summaryrefslogtreecommitdiff
path: root/src/conf_mode/service_ipoe-server.py
AgeCommit message (Collapse)Author
2023-03-09T5063: IPoE-server ethX vlan must not be used with client-subnetViacheslav Hletenko
IPoE-server 'interface ethX vlan xxx' (aka vlan-mon) must not be used with 'interface ethX client-subnet' So instead of shared pool accel-ppp uses the same pool for each dynamically added VLAN eth1 client-subnet '192.0.2.0/24' eth1 vlan '2000-2021' It cause this issue: eth1.2000 range 192.0.2.0/24 (the first client gets address from 192.0.2.2) eth2.2001 range 192.0.2.0/24 (the first client gets address from 192.0.2.2) Only named pools with vlan option must be used.
2022-09-21ipoe: T4678: T4703: rewrite to get_config_dict()Christian Poessinger
In addition to the rewrite to make use of get_config_dict() the CLI is slightly adjusted as specified in T4703. * Rename vlan-id and vlan-range to simply vlan * Rename network-mode to simply mode * Re-use existing common Jinja2 template for Accel-PPP which are shared with PPPoE and SSTP server. * Retrieve default values via defaultValue XML node
2022-07-02ipoe: T4507: Add option rate-limit for RADIUS authenticationViacheslav Hletenko
Add rate-limit options: attribute, muptiplier and vendor set service ipoe-server auth radius rate-limit attribute 'Mikrotik-Rate-Limit' set service ipoe-server auth radius rate-limit enable set service ipoe-server auth radius rate-limit multiplier '0.001' set service ipoe-server auth radius rate-limit vendor 'Miktorik'
2022-05-01accel-ppp: T4353: fix Jinja2 linting errorsChristian Poessinger
2022-04-04ipoe: T2580: Add pools and gateway optionsViacheslav Hletenko
Add new feature to allow to use named pools Can be used also with Radius attribute 'Framed-Pool' set service ipoe-server client-ip-pool name POOL1 gateway-address '192.0.2.1' set service ipoe-server client-ip-pool name POOL1 subnet '192.0.2.0/24'
2020-11-27vyos.template: T2720: always enable Jinja2 trim_blocks featureChristian Poessinger
2020-11-13vyos.template: provide general is_ip(v4|v6) helpersChristian Poessinger
We had two places were the is_ip, is_ipv4 and is_ipv6 helpers had been defined. All places now have been converged into vyos.template as they are used both in the Jinja2 templates and also in our scripts.
2020-09-26accel-ppp: T2918: Add accounting interim jitter optionsever-sever
2020-08-31configd: T2582: add scripts to include list for daemonJohn Estabrook
2020-08-02accel-ppp: T2756: make RADIUS accounting port configurableChristian Poessinger
Make the port used for RADIUS accounting user configurable. This is now valid for the following services which are based on Accel-PPP: * ipoe-server * pppoe-server * l2tp * pptp * sstp
2020-08-02ipoe-server: T2314: fix improper use of fail-time dictionary keyChristian Poessinger
2020-05-29airbag: T2088: explicit enabling of the featureThomas Mangin
airbag must now be explicitly installed. the patch also allow to fully disables the installation of the logging code at setup (and not just installing and doing nothing)
2020-05-04ipoe: T2294: Fix nodes pathDmitriyEshenko
2020-04-27template: T2388: move mkdir/chmod/chown within render()Thomas Mangin
2020-04-22accel-ppp: fix wrong reference in verify() on missing attributesChristian Poessinger
2020-04-19{pppoe,ipoe}-server: T2324: T2314: migrate CoA serverChristian Poessinger
2020-04-18ipoe-server: T2324: move template files to common accel-ppp template directoryChristian Poessinger
2020-04-18ipoe-server: T2324: migrate IPv6 client IP pool to common CLI nodesChristian Poessinger
2020-04-18ipoe-server: T2324: migrate RADIUS configuration to common CLI syntaxChristian Poessinger
2020-04-18ipoe-server: T2324: migrate IPv4/IPv6 name-servers to common nodeChristian Poessinger
2020-04-18ipoe-server: T2324: remove boilerplate code and adjust to other accel ↵Christian Poessinger
implementations
2020-04-18ipoe-server: rename XML/Python files for a common patternChristian Poessinger
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-21 01:20:10 +0000