summaryrefslogtreecommitdiff
path: root/src/conf_mode
AgeCommit message (Collapse)Author
2020-06-11wwan: T2241: bugfix VRF assignmentChristian Poessinger
2020-06-11console: T2569: run VGA console powersave on tty1Christian Poessinger
2020-06-11console: T2569: replicate console settings to grub.cfgChristian Poessinger
2020-06-09console: T2569: only start serial console if device existsChristian Poessinger
Only start console if it exists on the running system. If a user detaches a USB serial console and reboots - it should not fail!
2020-06-09console: T2529: migrate from ttyUSB device to new device in /dev/serial/by-busChristian Poessinger
During testing it was discovered that there is a well known problem (we had for ethernet interfaces) also in the serial port world. They will be enumerated and mapped to /dev/ttyUSBxxx differently from boot to boot. This is especially painful on my development APU4 board which also has a Sierra Wireless MC7710 LTE module installed. The serial port will toggle between ttyUSB2 and ttyUSB5 depending on the amount of serial port extenders attached (FT4232H). The shipped udev rule (/usr/lib/udev/rules.d/60-serial.rules) partly solves this by enumerating the devices into /dev/serial/by-id folder with their name and serial number - it's a very good idea but I've found that not all of the FT4232H dongles have a serial number programmed - this leads to the situation that when you plug in two cables with both having serial number 0 - only one device symlink will appear - the previous one is always overwritten by the latter one. Derive /usr/lib/udev/rules.d/60-serial.rules and create a /dev/serial/by-bus directory and group devices by attached USB root port.
2020-06-09console: T2569: initial implementation with XML and PythonChristian Poessinger
Migrate the serial console subsystem to XML and Python.
2020-06-07wwan: T2241: interface is not bond- or bridgeableChristian Poessinger
Commit 2cb806271928 ("wirelessmodem: T2241: make VRF and bond/bridge membership mutually exclusive") added some logic which is not forseen/neither makes sense on a dialup interface, thus it's removed again
2020-06-07wwan: T2488: remove generation of dedicated logfileChristian Poessinger
... all information are present in journald.
2020-06-07wwan: T2529: migrate device from ttyUSB to usbXbY.YpZ.ZChristian Poessinger
During testing it was discovered that there is a well known problem (we had for ethernet interfaces) also in the serial port world. They will be enumerated and mapped to /dev/ttyUSBxxx differently from boot to boot. This is especially painful on my development APU4 board which also has a Sierra Wireless MC7710 LTE module installed. The serial port will toggle between ttyUSB2 and ttyUSB5 depending on the amount of serial port extenders attached (FT4232H). The shipped udev rule (/usr/lib/udev/rules.d/60-serial.rules) partly solves this by enumerating the devices into /dev/serial/by-id folder with their name and serial number - it's a very good idea but I've found that not all of the FT4232H dongles have a serial number programmed - this leads to the situation that when you plug in two cables with both having serial number 0 - only one device symlink will appear - the previous one is always overwritten by the latter one. Derive /usr/lib/udev/rules.d/60-serial.rules and create a /dev/serial/by-bus directory and group devices by attached USB root port. vyos@vyos:~$ find /dev/serial/by-bus/ -name usb* -exec basename {} \; | sort usb0b1.3p1.0 usb0b1.3p1.2 usb0b1.3p1.3 usb0b2.4p1.0 usb0b2.4p1.1 usb0b2.4p1.2 usb0b2.4p1.3 So we have USB root 0 with bus 1.3 and port 1.0. The enumeration is constant accross reboots.
2020-06-06dhcpv6-pd: T2551: fix prefix length not set in configChristian Poessinger
Retrieving the CLI nodes from current config was missed out and only implemented for PPPoE.
2020-06-05Merge pull request #443 from mrozentsvayg/openvpn-T2550-ipv4-remote-hostChristian Poessinger
openvpn: T2550: fix for IPv4 remote-host addresses
2020-06-04openvpn: T2550: fix for IPv4 remote-host addressesMikhail Rozentsvayg
Commit bb9f998 added IPv6 support for OpenVPN, but IPv4 only configurations stopped working (Address family for hostname not supported) Commit fc467519 fixed some scenarios by using IPv4 protocols if 'local-host' is IPv4 address, but the client mode is using 'remote-host' instead and was still broken. This commit in addition to 'local-host' also checks all the 'remote-host' addresses.
2020-06-04Merge pull request #442 from L6NqLW/T2527Christian Poessinger
bonding: T2527: delete the last interface from bond
2020-06-01bgp: T2387: proof-of-concept using get_config_dict()Christian Poessinger
2020-05-31openvpn: T2532: add VRF supportChristian Poessinger
2020-05-30qat: use script file shipped from IntelChristian Poessinger
2020-05-29Merge pull request #439 from thomas-mangin/T2088-explicit-airbagChristian Poessinger
airbag :T2088: make airbag explicit
2020-05-29airbag: T2088: explicit enabling of the featureThomas Mangin
airbag must now be explicitly installed. the patch also allow to fully disables the installation of the logging code at setup (and not just installing and doing nothing)
2020-05-28bonding: T2527: delete the last interface from bondGabriel Skupien
2020-05-28ethernet: T2514: add warning when changing mac for bond memberL6NqLW
2020-05-27ethernet: T2476: do not override MAC of lower interface if bond memberL6NqLW
2020-05-26dhcpv6-pd: T2506: use common dictionary definition for config parametersChristian Poessinger
2020-05-26dhcpv6-pd: T2506: add option to request specific prefix lengthChristian Poessinger
Some ISPs (e.g. Comcast) only delegate a /64 by default. You have to explicitly "ask" for a bigger (e.g. /60) prefix. This commit adds a CLI node to request a specific prefix length in the range 32 - 64. dhcpv6-options { prefix-delegation { length 60 } }
2020-05-26dhcpv6-pd: pppoe: T2506: restructure CLIChristian Poessinger
Rename the CLI nodes for prefix delegation from "dhcpv6-options delegate <interface>" to "dhcpv6-options prefix-delegation interface <interface>". The change is required to add the possibility to request for specific prefix sized via the CLI. That option was not possible with the old configuration tree.
2020-05-26dhcpv6-pd: ethernet: T421: fix TypeErrorChristian Poessinger
Copy/paste error resulting in: Traceback (most recent call last): File "/usr/libexec/vyos/conf_mode/interfaces-ethernet.py", line 303, in <module> apply(c) File "/usr/libexec/vyos/conf_mode/interfaces-ethernet.py", line 205, in apply e.dhcp.v6.options['dhcpv6_pd'] = e['dhcpv6_pd'] TypeError: 'EthernetIf' object is not subscriptable
2020-05-22login: T2492: must use try/except when adding user for the first timeChristian Poessinger
2020-05-22login: T2492: re-use code from vyos.utilChristian Poessinger
2020-05-22login: T2492: force setting of encrypted password on first bootChristian Poessinger
2020-05-22login: T2492: fix flake8 warningsChristian Poessinger
2020-05-22login: T2492: do not set encrypted user password when it is not changedChristian Poessinger
2020-05-22pppoe: T2488: bugfix, missing not in if condition prevented startupChristian Poessinger
Commit 39c53aadbf9e ("pppoe: T2488: remove logfile generation") accidently missed a not in an if statement.
2020-05-22macsec: T2491: add replay window protectionChristian Poessinger
2020-05-22macsec: T2023: flake8/autopep8 correctionsChristian Poessinger
2020-05-22macsec: T2023: fix wrong use or f-format stringChristian Poessinger
2020-05-22macsec: T2023: remove unused importChristian Poessinger
2020-05-21pppoe: T2380: fix NameError: name 'intf' is not definedChristian Poessinger
2020-05-21pppoe: T2380: dis-/connect should use proper systemd callsChristian Poessinger
2020-05-21pppoe: T2488: remove logfile generationChristian Poessinger
2020-05-21wireless: T1627: remove get_conf_file()Christian Poessinger
2020-05-21macsec: T2023: delete wpa_supplicant config when interface is removedChristian Poessinger
2020-05-21macsec: T2023: stop wpa_supplicant on interface deletionChristian Poessinger
2020-05-21macsec: T2023: cleanup wpa_supplicant config file nameChristian Poessinger
2020-05-21macsec: T2023: improve verify() when encryption is enabledChristian Poessinger
With enabled encryption keys must be configured.
2020-05-21macsec: T2023: support MACsec Key Agreement protocol actor priorityChristian Poessinger
2020-05-21macsec: T2023: rename "security key" node to "security mka"Christian Poessinger
MACsec always talks about MKA (MACsec Key Agreement protocol) thus the node should reflect that.
2020-05-21macsec: T2023: use wpa_supplicant for key managementChristian Poessinger
2020-05-21macsec: T2023: cli: move "cipher" and "encryption" under new "secutiry" nodeChristian Poessinger
This is best suited as a key is required, too.
2020-05-21macsec: T2023: cipher suite is mandatoryChristian Poessinger
2020-05-21macsec: T2023: use list when working with Config()Christian Poessinger
2020-05-21macsec: T2023: add optional encryption commandChristian Poessinger
By default MACsec only authenticates traffic but has support for optional encryption. Encryption can now be enabled using: set interfaces macsec <interface> encrypt
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-12 03:19:30 +0000