summaryrefslogtreecommitdiff
path: root/src/conf_mode
AgeCommit message (Collapse)Author
2020-09-22ifconfig: T2653: bond: bridge: ensure member interface is not a source-interfaceChristian Poessinger
As we already check that a bond/bridge member interface is not a member of any other bridge or bond, the check must be extended. We also need to ensure that the bond member interface is not used as a source-interface to pppoe, macsec, tunnel, pseudo-ethernet, vxlan interfaces.
2020-09-22ifconfig: T2653: move is_member() from vyos.vylidate to vyos.configdictChristian Poessinger
2020-09-21macsec: T2788: source-interface must not be member of a bridgeChristian Poessinger
Add verify() step to ensure the macsec source-interface is not already part of a bridge interface. This should probably also be checked for bond interfaces.
2020-09-20macsec: T2023: add missing mtu CLI optionChristian Poessinger
Base MTU for MACsec is 1468 bytes (encryption headers), but we leave room for 802.1ad and 802.1q VLAN tags, thus the limit is lowered to 1460 bytes to not make the user juggle with the MTU bytes if he enables VLAN support later on, which is yet to come.
2020-09-20ifconfig: T2653: remove duplicates of get_config()Christian Poessinger
A lot of derived classes from Interface implemented their own get_config() method which more or less was the same everywhere. We also hat different qualifiers like @staticmethod or @classmethod. This is now changed to only have the @classmethod in Interface base class which will return the necessary dictionary keys for the required interfaces. This change is a mid reduction in lines of code which is always a very nice thing!
2020-09-19dns: forwarding: T2900: restore proper Config() level in verify()Christian Poessinger
Despite the fact that running verify on Config() is "bad" and "not as intended" the level of the configuration must match the keys that are checked by exits(). Re-set proper Config() level before querying the system nodes.
2020-09-16wireless: T2887: Jinja2 can not work on keys starting with a numberChristian Poessinger
... an error would be presented: jinja2.exceptions.TemplateSyntaxError: expected token 'end of statement block', got 'mhz_incapable', thus we simply rename the key before rendering the template.
2020-09-15bonding: T2515: preserve interface admin state when removing from bondChristian Poessinger
Removing a member from a bond/LACP will turn the physical interface always in admin-down state. This is invalid, the interface should be placed into the state configured on the VyOS CLI. Smoketest on bond interfaces is extended to check this behavior.
2020-09-15vyos.configdict: T2515: leaf_node_changed() should return list or NoneChristian Poessinger
2020-09-13ddclient: T2858: migrate to get_config_dict()Christian Poessinger
2020-09-13qat: T2857: cleanup configuration scriptChristian Poessinger
2020-09-09openconnect: T2036: Move CLI commands under vpn openconnectDmitriyEshenko
2020-09-01frr-template: T2850: Add BGP template for FRRsever-sever
2020-08-31T2636: remove workarounds for get_config_dict()Christian Poessinger
Now that b40c52682a256 ("config: T2636: get_config_dict() returns a list on multi node by default") is implemented the workarounds can be removed.
2020-08-31configd: T2582: add scripts to include list for daemonJohn Estabrook
2020-08-30nat: T2814: nftables module for NAT has been renamedChristian Poessinger
Depending on the underlaying Kernel version load the corresponding Kernel module.
2020-08-30Merge pull request #534 from sever-sever/T2833Christian Poessinger
rip: T2833: Fix distribute-list filter
2020-08-28nat: T2813: translation address is mandatory if rule is not excludedChristian Poessinger
2020-08-27rip: T2833: Fix distribute-list filtersever-sever
2020-08-26https: T2830: update to use get_config_dictJohn Estabrook
2020-08-22dhcpv6-pd: T2677: optimize CLI interface for PD configurationChristian Poessinger
The current CLI did not support multiple prefix-delegations per interface. Some ISPs only send one /64 to a client per prefix-delegation request, but they allow the customer to request multiple prefixes. The 'dhcpv6-options prefix-delegation' node has been renamed and converted to a tag node named 'dhcpv6-options pd'. The tag node specifies a PD request (>=0). In the past the user needed to know what prefix will be assigned and required to calculate the sla-len by himself. The 'sla-len' node was dropped and is now calculated in the background from the 'dhcpv6-options pd 0 length' node. It is no longer mandatory to supply the 'sla-id' node, if sla-id is not specified it is 'guessed' by counting upwards. Example configuration: ---------------------- ethernet eth1 { address dhcpv6 dhcpv6-options { pd 0 { length 56 interface eth2 { address 1 } } } } This will request a /56 assignment from the ISP and will delegate a /64 network to interface eth2. VyOS will use the interface address ::1 on the delegate interface (eth2) as its local address.
2020-08-19https: T2815: adjust for change in certbot config directoryJohn Estabrook
2020-08-19certbot: T2815: change config dir to /config/auth/letsencryptJohn Estabrook
2020-08-20Merge pull request #530 from DmitriyEshenko/1x-anyconnect-fix01Christian Poessinger
anyconnect: T2811: Return None if anyconnect not configured
2020-08-19mpls-ldp: T915: Add discovery hello timerssever-sever
2020-08-19anyconnect: T2811: Return None if anyconnect not configuredDmitriyEshenko
2020-08-18anyconnect: T2036: add anyconnect VPN supportEshenko Dmitriy
2020-08-18lcd: T2564: add support for Lanner, Watchguard, Symantec boxesChristian Poessinger
2020-08-15Merge branch 't2564-lcd' of github.com:c-po/vyos-1x into currentChristian Poessinger
* 't2564-lcd' of github.com:c-po/vyos-1x: lcd: T2564: flatten CLI interface system display: T2564: Added test model system display: T2564: Dictionary code update system display: T2564: Conf files to /run system display: T2564: Changed "duration" to "time" system display: T2564: py code cleanup system display: T2564: Replace "config (enabled|disabled)" with "display disabled" system display: T2564: Lowercase model names system display: T2564 Extend VyOS to support appliance LCDs
2020-08-15pseudo-ethernet: T2800: source-interface must not be member of a bridgeChristian Poessinger
2020-08-15pppoe-server: T2796: at least one server interface must be definedChristian Poessinger
Add missing verify() check that at least one interface must be defined to listen to PPPoE data.
2020-08-15lcd: T2564: flatten CLI interfaceChristian Poessinger
* set system lcd device <device> * set system lcd model <modeml> Both device and model have completion helpers for supported interfaces and LCD displays.
2020-08-13console-server: T2490: use get_first_key=True on get_config_dict()Christian Poessinger
2020-08-12Merge branch 'system-display' of https://github.com/fmertz/vyos-1x into ↵Christian Poessinger
t2564-lcd * 'system-display' of https://github.com/fmertz/vyos-1x: system display: T2564: Added test model system display: T2564: Dictionary code update system display: T2564: Conf files to /run system display: T2564: Changed "duration" to "time" system display: T2564: py code cleanup system display: T2564: Replace "config (enabled|disabled)" with "display disabled" system display: T2564: Lowercase model names system display: T2564 Extend VyOS to support appliance LCDs
2020-08-10host_name: T2784: remove unused importsJohn Estabrook
2020-08-10host_name: T2784: remove unused arg in verify, unneeded arg in get_configJohn Estabrook
2020-08-04ssh: T2651: add cli options for source addressChristian Poessinger
When running SSH from the VyOS system the source IP address can be set by: set system options ssh-client source-address x.x.x.x
2020-08-04router-advert: T2758: bugfix 'infinity' is not a valid integer numberChristian Poessinger
Problem was introduced in commit 740ace13 ("router-advert: T2609: add missing verify() for prefix lifetime"). The 'infinity' literal was not converted to its corresponding integer 0xffffffff (4294967295) for the check.
2020-08-03ssh: T1076: make configuration volatileChristian Poessinger
Move sshd_config file to /run so it must be generated on every boot and is not stored accidently.
2020-08-03ifconfig: T2740: pass config dict to DHCP class for IPv6Christian Poessinger
This removes additional code paths as we can instatly work with the input dict the same was as it was done for PPPoE. This fixes the entire DHCPv6-PD support on non PPPoE interfaces as this was lost in translation while processing T2653.
2020-08-02accel-ppp: T2756: make RADIUS accounting port configurableChristian Poessinger
Make the port used for RADIUS accounting user configurable. This is now valid for the following services which are based on Accel-PPP: * ipoe-server * pppoe-server * l2tp * pptp * sstp
2020-08-02ipoe-server: T2314: fix improper use of fail-time dictionary keyChristian Poessinger
2020-07-30router-advert: T2745: migrate to get_config_dict()Christian Poessinger
2020-07-29wireguard: T2743: move key migration from config script to migration scriptChristian Poessinger
Migration files on the storage should be done one time by a migration script instead of every time the configuration changes. Moving this to an older migration script is fine as this is around for a long time and all rolling releases are already up2date. It only affects updates from VyOS 1.2 series.
2020-07-29mdns-repeater: T2742: migrate to get_config_dict()Christian Poessinger
2020-07-26wireguard: ifconfig: T2653: move to get_config_dict()Christian Poessinger
The current VyOS CLI parser code written in Python contains a ton of duplicates which I can also hold myself accountable for - or maybe mainly me - depends on the angle of judge.
2020-07-26vxlan: ifconfig: T2653: move to get_interface_dict()Christian Poessinger
The current VyOS CLI parser code written in Python contains a ton of duplicates which I can also hold myself accountable for - or maybe mainly me - depends on the angle of judge.
2020-07-25l2tpv3: ifconfig: T2653: move implementation to get_interface_dict()Christian Poessinger
The current VyOS CLI parser code written in Python contains a ton of duplicates which I can also hold myself accountable for - or maybe mainly me - depends on the angle of judge.
2020-07-25ifconfig: T2653: make ifname an optional argument to get_interface_dict()Christian Poessinger
Further reduce the boiler-plate code to determine interface tag node or not. It can be passed into get_interface_dict() if explicitly required - else it is taken from the environment.
2020-07-25wireless: ifconfig: T2653: move to get_config_dict()Christian Poessinger
The current VyOS CLI parser code written in Python contains a ton of duplicates which I can also hold myself accountable for - or maybe mainly me - depends on the angle of judge.
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-15 13:53:35 +0000