summaryrefslogtreecommitdiff
path: root/src/conf_mode
AgeCommit message (Collapse)Author
2023-12-21nat66: T2898: build fix after ndp-proxy backportChristian Breunig
2023-12-21T2898: add ndp-proxy serviceChristian Breunig
VyOS CLI command set service ndp-proxy interface eth0 prefix 2001:db8::/64 mode 'static' Will generate the following NDP proxy configuration $ cat /run/ndppd/ndppd.conf # autogenerated by service_ndp-proxy.py # This tells 'ndppd' how often to reload the route file /proc/net/ipv6_route route-ttl 30000 # This sets up a listener, that will listen for any Neighbor Solicitation # messages, and respond to them according to a set of rules proxy eth0 { # Turn on or off the router flag for Neighbor Advertisements router no # Control how long to wait for a Neighbor Advertisment message before invalidating the entry (milliseconds) timeout 500 # Control how long a valid or invalid entry remains in the cache (milliseconds) ttl 30000 # This is a rule that the target address is to match against. If no netmask # is provided, /128 is assumed. You may have several rule sections, and the # addresses may or may not overlap. rule 2001:db8::/64 { static } } (cherry picked from commit 4d721a58020971d00ab854c37b68e88359999f9c)
2023-12-20https api: T5844: issue a warning about the classic API unavailabilityDaniil Baturin
when no API keys are set (cherry picked from commit 7bad0e115ecc25224a0c3a2720a2697442624229)
2023-12-20T5798: load-balancing revese-proxy add multiple SSL certificatesViacheslav Hletenko
Add ability to configure multiple SSL certificates for frontend/service set load-balancing reverse-proxy service web mode http set load-balancing reverse-proxy service web port 443 set load-balancing reverse-proxy service web ssl certificate cert1 set load-balancing reverse-proxy service web ssl certificate cert2 (cherry picked from commit fe99c45e05fd5794905145ddca80e6078145c2e8)
2023-12-19T5823: Add recursive_defaults for BGP get_config dictionaryViacheslav Hletenko
Add recursive_defaults values for BGP "get_config" dictionary. (cherry picked from commit 4d5445740a1529691594263af22f2a9d07bbfe70)
2023-12-18T4163: Add BGP Monitoring Protocol BMP featureViacheslav Hletenko
Add BMP feature. BMP (BGP Monitoring Protocol, RFC 7854) is used to send monitoring data from BGP routers to network management entities https://docs.frrouting.org/en/latest/bmp.html Example: set system frr bmp commit run restart bgp set protocols bgp system-as '65001' set protocols bgp neighbor 192.0.2.11 address-family ipv4-unicast set protocols bgp neighbor 192.0.2.11 remote-as '65001' set protocols bgp bmp mirror-buffer-limit '256000000' set protocols bgp bmp target foo address '127.0.0.1' set protocols bgp bmp target foo port '5000' set protocols bgp bmp target foo min-retry '1000' set protocols bgp bmp target foo max-retry '2000' set protocols bgp bmp target foo mirror set protocols bgp bmp target foo monitor ipv4-unicast post-policy set protocols bgp bmp target foo monitor ipv4-unicast pre-policy set protocols bgp bmp target foo monitor ipv6-unicast post-policy set protocols bgp bmp target foo monitor ipv6-unicast pre-policy (cherry picked from commit 5523fccf4f7d05444c36c568128e94cd7b08c34f)
2023-12-15frr: T4020: add option to define number of open file descriptorsChristian Breunig
This allows the operator to control the number of open file descriptors each daemon is allowed to start with. The current assumed value on most operating systems is 1024. If the operator plans to run bgp with several thousands of peers then this is where we would modify FRR to allow this to happen. set system frr descriptors <n> (cherry picked from commit 892c28ccf634173d4c4952c248cb03974c560793)
2023-12-13srv6: T591: initial implementation to support locator definitionChristian Breunig
VyOS CLI set protocols segment-routing srv6 locator bar prefix '2001:b::/64' set protocols segment-routing srv6 locator foo behavior-usid set protocols segment-routing srv6 locator foo prefix '2001:a::/64' Will generate in FRR segment-routing srv6 locators locator bar prefix 2001:b::/64 block-len 40 node-len 24 func-bits 16 exit ! locator foo prefix 2001:a::/64 block-len 40 node-len 24 func-bits 16 behavior usid exit ! exit ! exit ! exit (cherry picked from commit ca301cdd4746187f96ff84e411fda6a84e33f237)
2023-12-13bgp: T591: add SRv6 support from FRRChristian Breunig
set protocols bgp sid vpn per-vrf export '99' set protocols bgp srv6 locator 'foo' set protocols bgp system-as '100' Will generate in FRR config router bgp 100 no bgp ebgp-requires-policy no bgp default ipv4-unicast no bgp network import-check ! segment-routing srv6 locator foo exit sid vpn per-vrf export 99 exit (cherry picked from commit af46fe54e56cf85d13b62ee771bec3d80f225ac5)
2023-12-10T5791: DNS dynamic exclude check for dynamic interfaces PPPoEViacheslav Hletenko
Dynamic interfaces such as PPPoE/sstpc can not exist during verification dns dynamic. As they added and removed dynamically. Add interface_filter to exclude them from checks (cherry picked from commit 0a1c9bc38440c86cbbc016fb6d8f7d6f36993652)
2023-12-08login: T4943: use pam-auth-update to enable/disable Google authenticatorChristian Breunig
The initial version always enabled Google authenticator (2FA/MFA) support by hardcoding the PAM module for sshd and login. This change only enables the PAM module on demand if any use has 2FA/MFA configured. Enabling the module is done system wide via pam-auth-update by using a predefined template. Can be tested using: set system login user vyos authentication plaintext-password vyos set system login user vyos authentication otp key 'QY735IG5HDHBFHS5W7Y2A4EM274SMT3O' See https://docs.vyos.io/en/latest/configuration/system/login.html for additional details. (cherry picked from commit e134dc4171b051d0f98c7151ef32a347bc4f87e2)
2023-12-08Merge pull request #2581 from vyos/mergify/bp/sagitta/pr-2578Viacheslav Hletenko
T160: add NAT64 (backport #2578)
2023-12-07T160: Rebase and fixes for NAT64Viacheslav Hletenko
- Update the base (rebase) - Move include/nat64-protocol.xml.i => include/nat64/protocol.xml.i - Delete unwanted `write_json`, use `write_file` instead - Remove unnecessary deleting of default values for tagNodes T2665 - Add smoketest Example: ``` set interfaces ethernet eth0 address '192.168.122.14/24' set interfaces ethernet eth0 address '192.168.122.10/24' set interfaces ethernet eth2 address '2001:db8::1/64' set nat64 source rule 100 source prefix '64:ff9b::/96' set nat64 source rule 100 translation pool 10 address '192.168.122.10' set nat64 source rule 100 translation pool 10 port '1-65535' ``` (cherry picked from commit 336bb5a071b59264679be4f4f9bedbdecdbe2834)
2023-12-07nat64: T160: Implement Jool-based NAT64 translatorJoe Groocock
Signed-off-by: Joe Groocock <me@frebib.net> (cherry picked from commit 7d49f7079f1129c2fadc7f38ceb230804d89e177) # Conflicts: # debian/control
2023-12-05ddclient: T5791: Update dynamic dns configuration pathIndrajit Raychaudhuri
Modify the configuration path to be consistent with the usual dialects of VyoS configuration (wireguard, dns, firewall, etc.) This would also shorten the configuration path and have a unified treatment for RFC2136-based updates and other 'web-service' based updates. While at it, add support for per-service web-options. This would allow for probing different external URLs on a per-service basis.
2023-12-01http-api: T5782: use single config-mode script for https and http-apiJohn Estabrook
2023-12-01http-api: T5768: remove auxiliary http-api.confJohn Estabrook
2023-12-01Merge pull request #2555 from indrajitr/sagitta-ddclient-backportsChristian Breunig
ddclient: T5573,T5574,T5612,T5708: Backport ddclient related changes
2023-12-01mdns: T5723: Always reload systemd daemon before applying changesIndrajit Raychaudhuri
Additionally, templatize system service override and move it to the runtime path. (cherry picked from commit eb906739047187c322b6ce9efe7c9479bed9a024)
2023-11-30ddclient: T5708: Additional smoketests for web-optionsIndrajit Raychaudhuri
Add additional smoketests for web-options validation. Also, format error messages to optionally include protocol name.
2023-11-30ddclient: T5708: Migration to 3.11.1 and related improvementsIndrajit Raychaudhuri
- Migrate to ddclient 3.11.1 and enforce debian/control dependency - Add dual stack support for additional protocols - Restrict usage of `porkbun` protocol, VyOS configuration structure isn't compatible with porkbun yet - Improve and cleanup error messages
2023-11-30ddclient: T5708: Validate proper use of `web-options`Indrajit Raychaudhuri
`web-options` is only applicable when using HTTP(S) web request to obtain the IP address. Apply guard for that.
2023-11-30ddclient: T5574: Support per-service cache management for servicesIndrajit Raychaudhuri
Add support for per-service cache management for ddclient providers via `wait-time` and `expiry-time` options. This allows for finer-grained control over how often a service is updated and how long the hostname will be cached before being marked expired in ddclient's cache. More specifically, `wait-time` controls how often ddclient will attempt to check for a change in the hostname's IP address, and `expiry-time` controls how often ddclient to a forced update of the hostname's IP address. These options intentionally don't have any default values because they are provider-specific. They get treated similar to the other provider- specific options in that they are only used if defined.
2023-11-30ddclient: T5612: Additional refactoring for scripts and smoketestsIndrajit Raychaudhuri
Additional cleanup and refactoring for ddclient scripts including the smotektests.
2023-11-30ddclient: T5612: Improve dual stack support for dyndns2 protocolIndrajit Raychaudhuri
dyndns2 protocol in ddclient honors dual stack for selective servers because of the way it is implemented in ddclient. We formalize the well known servers that support dual stack in a list and check against it when validating the configuration.
2023-11-30ddclient: T5612: Enable TTL support for web-service based protocolsIndrajit Raychaudhuri
Enable TTL support for web-service based protocols in addition to RFC2136 based (nsupdate) protocol. Since TTL is not supported by all protocols, and thus cannot have a configuration default, the existing XML snippet `include/dns/time-to-live.xml.i` does not have common `<defaultValue>300</defaultValue>` anymore and is instead added explicitly whenever necessary.
2023-11-30ddclient: T5612: Fix VRF support for ddclient serviceIndrajit Raychaudhuri
Fix VRF support interface definition and configuration mode for ddclient to actually capture the VRF name and pass it to the template.
2023-11-23https api: T5772: check if keys are configuredDaniil Baturin
unless PAM auth is enabled for GraphQL (cherry picked from commit 8c450ea7f538beb0b2cd21d35c05d18db49a1802)
2023-11-22pppoe: T5630: make MRU default to MTU if unspecifiedChristian Breunig
This fixes the implementation in e062a8c11 ("pppoe: T5630: allow to specify MRU in addition to already configurable MTU") and restores the bahavior that MRU defaults to MTU if MRU is not explicitly set. This was the behavior in VyOS 1.3.3 and below before we added ability to define the MRU value. (cherry picked from commit ffd7339e2ea3eafdd97ac0763ca4a3913fe71bf3)
2023-11-22vxlan: T5753: add support for VNI filteringChristian Breunig
In a service provider network a service provider typically supports multiple bridge domains with overlapping vlans. One bridge domain per customer. Vlans in each bridge domain are mapped to globally unique VXLAN VNI ranges assigned to each customer. Without the ability of VNI filtering, we can not provide VXLAN tunnels with multiple tenants all requiring e.g. VLAN 10. To Test: set interfaces vxlan vxlan987 parameters external set interfaces vxlan vxlan987 source-interface eth0 set interfaces vxlan vxlan987 parameters vni-filter set interfaces vxlan vxlan987 vlan-to-vni 50 vni 10050 set interfaces vxlan vxlan987 vlan-to-vni 51 vni 10051 set interfaces vxlan vxlan987 vlan-to-vni 52 vni 10052 set interfaces vxlan vxlan987 vlan-to-vni 53 vni 10053 set interfaces vxlan vxlan987 vlan-to-vni 54 vni 10054 set interfaces vxlan vxlan987 vlan-to-vni 60 vni 10060 set interfaces vxlan vxlan987 vlan-to-vni 69 vni 10069 set interfaces bridge br0 member interface vxlan987 Add new op-mode command: show bridge vni Interface VNI ----------- ----------- vxlan987 10050-10054 vxlan987 10060 vxlan987 10069 (cherry picked from commit 35f6033d21053fa420e837f157cd9377a4ccd26a)
2023-11-22http: T5762: rename "virtual-host listen-port" -> "virtual-host port"Christian Breunig
This complements commit f5e43b136 ("http: T5762: api: make API socket backend communication the one and only default") so we have a consistent port CLI node across VyOS components. (cherry picked from commit 0e885f1bf01424130b6876e769cc42612b19351b)
2023-11-21T5419: firewall: backport firewall flowtable to Sagitta.Nicolas Fort
2023-11-21Merge pull request #2512 from zdc/T5577-sagittaChristian Breunig
PAM: T5577: Backported PAM settings from circinus
2023-11-20http: T5762: api: make API socket backend communication the one and only defaultChristian Breunig
Why: Smoketests fail as they can not establish IPv6 connection to uvicorn backend server. https://github.com/vyos/vyos-1x/pull/2481 added a bunch of new smoketests. While debugging those failing, it was uncovered, that uvicorn only listens on IPv4 connections vyos@vyos# netstat -tulnp | grep 8080 (Not all processes could be identified, non-owned process info will not be shown, you would have to be root to see it all.) tcp 0 0 127.0.0.1:8080 0.0.0.0:* LISTEN - As the CLI already has an option to move the API communication from an IP to a UNIX domain socket, the best idea is to make this the default way of communication, as we never directly talk to the API server but rather use the NGINX reverse proxy. (cherry picked from commit f5e43b1361fb59a9c260739bdb28729d5119507c)
2023-11-20TACACS: T5577: Added `mandatory` and `optional` modes for TACACS+zsdc
In CLI we can choose authentication logic: - `mandatory` - if TACACS+ answered with `REJECT`, authentication must be stopped and access denied immediately. - `optional` (default) - if TACACS+ answers with `REJECT`, authentication continues using the next module. In `mandatory` mode authentication will be stopped only if TACACS+ clearly answered that access should be denied (no user in TACACS+ database, wrong password, etc.). If TACACS+ is not available or other errors happen, it will be skipped and authentication will continue with the next module, like in `optional` mode.
2023-11-20RADIUS: T5577: Added `mandatory` and `optional` modes for RADIUSzsdc
In CLI we can choose authentication logic: - `mandatory` - if RADIUS answered with `Access-Reject`, authentication must be stopped and access denied immediately. - `optional` (default) - if RADIUS answers with `Access-Reject`, authentication continues using the next module. In `mandatory` mode authentication will be stopped only if RADIUS clearly answered that access should be denied (no user in RADIUS database, wrong password, etc.). If RADIUS is not available or other errors happen, it will be skipped and authentication will continue with the next module, like in `optional` mode.
2023-11-15pim: T5733: incorporate feedback from peer reviewChristian Breunig
(cherry picked from commit 64b4cfc71d402222fd6b034336b3588b5986ba24)
2023-11-15pim6: T5733: add missing FRR PIM6 related featuresChristian Breunig
(cherry picked from commit 403d2ffd6e46cb082b1d16ddf515e1784bee968c) # Conflicts: # data/templates/frr/pim6d.frr.j2 # interface-definitions/protocols-pim6.xml.in # smoketest/scripts/cli/test_protocols_pim6.py # src/conf_mode/protocols_pim6.py
2023-11-15pim: T5733: fix CLI level of global PIM commandsChristian Breunig
(cherry picked from commit dd13213ae94f071bc30cc17f5fabef02fbf95939)
2023-11-15igmp: T5736: migrate "protocols igmp" to "protocols pim"Christian Breunig
IGMP and PIM are two different but related things. FRR has both combined in pimd. As we use get_config_dict() and FRR reload it is better to have both centrally stored under the same CLI node (as FRR does, too) to just "fire and forget" the commit to the daemon. "set protocols igmp interface eth1" -> "set protocols pim interface eth1 igmp" (cherry picked from commit bc83fb097719f5c4c803808572f690fbc367b9e5)
2023-11-15pim: T5733: add missing FRR PIM related featuresChristian Breunig
Migrate CLI configuration retrival to common get_config_dict(). In addition add new functionality to VyOS that is PIM related and already available in FRR. (cherry picked from commit 9abc02edcc237760f1f8aa1b3f08d7f4d18f866c) # Conflicts: # python/vyos/frr.py # src/op_mode/restart_frr.py
2023-11-14T5729: T5590: T5616: backport to sagita fwall marks, fix on firewall logs ↵Nicolas Fort
parsing, and migration to valueless node for log and state matchers
2023-11-09T1797: Delete VPP from vyos-1x as it is implemented in addonViacheslav Hletenko
(cherry picked from commit 59c8d5febb2b1333643372f8956fa8f219d022cb)
2023-11-07T5559: Add static neighbor-proxy featureViacheslav Hletenko
Ability to set ip neigbhor proxy set protocols static neighbor-proxy arp 192.0.2.1 interface 'eth0' set protocols static neighbor-proxy arp 192.0.2.2 interface 'eth0' set protocols static neighbor-proxy nd 2001:db8::1 interface 'eth1' (cherry picked from commit c56af995b6e3d867c2a67deeb4be79e498f0a7cf)
2023-11-07T5720: Fix for PPPoE-server adding new interfacesViacheslav Hletenko
If we add a new interface for PPPoe-server we MUST restart the `accel-ppp@pppoe.service` as `reload` is not implemented for accel-ppp daemon Otherwise we have listen interface in the /run/accel-pppd/pppoe.conf which does not work (cherry picked from commit ffda9068b22e2d8a6841fcd8cdf62bbe266ea02c)
2023-11-07Merge pull request #2444 from vyos/mergify/bp/sagitta/pr-2416Christian Breunig
T5698 EVPN ESI Multihoming (backport #2416)
2023-11-06bond: T5698: add support for EVPN MultihomingChristian Breunig
set interfaces bonding bond10 evpn es-df-pref '50' set interfaces bonding bond10 evpn es-id '10' set interfaces bonding bond10 evpn es-sys-mac '01:23:45:67:89:ab' set interfaces bonding bond10 member interface 'eth3' set interfaces bonding bond10 mode '802.3ad' (cherry picked from commit 937685608e61151275c4f60c6d00c0154f2ca06d)
2023-11-06vxlan: T3700: add bridge dependency call when altering member interfacesChristian Breunig
Commit 7f6624f5a6f8bd ("vxlan: T3700: support VLAN tunnel mapping of VLAN aware bridges") added support for Single VXLAN Device (SVD) containers supported by the Linux Kernel. When working with bridge VIFs it turned out that when deleting a VIF all the VXLAN tunnel mappings got deleted, too. In order to avoid this, if the bridge has a VXLAN member interface which vlan-to-vni mapping enabled, we add a dependency that we call VXLAN conf-mode script after messing arround with the bridge VIFs and re-create tunnel mappings. (cherry picked from commit fdf7f3a05edbaaf8aeca7e24a9980d5af67dca18)
2023-11-06T5541: firewall: fix ZBF template and ruleset generation for loca-zone rules.Nicolas Fort
2023-11-03wireguard: T5707: remove previously deconfigured peerChristian Breunig
Changing the public key of a peer (updating the key material) left the old WireGuard peer in place, as the key removal command used the new key. WireGuard only supports peer removal based on the configured public-key, by deleting the entire interface this is the shortcut instead of parsing out all peers and removing them one by one. Peer reconfiguration will always come with a short downtime while the WireGuard interface is recreated. (cherry picked from commit 2fc8738bc9c2fb6364a22d86079e8635cee91949)
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-26 23:19:43 +0000