Age | Commit message (Collapse) | Author |
|
T6199: spring cleaning - drop unused Python imports (backport #3240)
|
|
found using "git ls-files *.py | xargs pylint | grep W0611"
(cherry picked from commit 274b2da242acd1f1f64ff1dee471e34295137c5f)
|
|
* Use interface_exists() outside of verify()
* Use verify_interface_exists() in verify() to drop common error message
(cherry picked from commit 4c7c168fe970b807750a05ceb66b70c0d8652535)
|
|
<high-availability>. Also, add <mode> parameter in order to configure active-active or active-passive behavior for HA.
|
|
T6192: allow binding SSH to multiple VRF instances (backport #3229)
|
|
The next evolutional step after adding get_config_dict(..., with_pki=True) is
to add a common verification function for the recurring task of validating SSL
certificate existance in e.g. EAPoL, OpenConnect, SSTP or HTTPS.
(cherry picked from commit 3b758d870449e92fece9e29c791b950b332e6e65)
|
|
Currently VyOS only supports binding a service to one individual VRF. It might
become handy to have the services (initially it will be VRF, NTP and SNMP) be
bound to multiple VRFs.
Changed VRF from leafNode to multi leafNode with defaultValue: default - which
is the name of the default VRF.
(cherry picked from commit e5af1f0905991103b12302892e6f0070bbb7b770)
|
|
(cherry picked from commit 5bb27f0c6220fd940b63cdd37a60c312c0ac3efd)
|
|
(cherry picked from commit 462ba67cf2e193883e33b4ce655b2b0cd1aab80f)
|
|
(cherry picked from commit f92ef7f3c86ca09775b536ca2bd9813f95cc7d3f)
|
|
(cherry picked from commit a33946630348371518247ff13ce918c208ef50d1)
|
|
(cherry picked from commit e257155aea09b906d8784cb6143d3ab27578c4a8)
|
|
(cherry picked from commit 09ac2851f89f2b7d94a21c3506e46f380e961fba)
|
|
(cherry picked from commit 6e0fdbcbba39691461f791c7a68a2c6c5091d2c1)
|
|
name-server option"
This fixes an invalid warning when using a DHCP VLAN interface to retrieve the
system nameserver to be used. VLAN CLI config is not properly expanded
leading to a false warning:
[ system name-server eth1.10 ]
WARNING: "eth1.10" is not a DHCP interface but uses DHCP name-server option!
(cherry picked from commit 61e70c5500ad5b0a9d25bdee28d982644bad6461)
|
|
(cherry picked from commit 320fe827b4842b0c0da1ec5fee3d41a5730334d5)
|
|
peer-group
changed exception condition
Improved route_reflector_client test
(cherry picked from commit 84f05b1dd41bea5de16d707aa77a467f8d499323)
|
|
dhcp-server: T4718: Listen-address is not commited if the IP address is on the interface with a VRF
|
|
T5872: ipsec remote access VPN: support dhcp-interface. (backport #2965)
|
|
This changes behaviour from fetching CA chain in PKI, to the user manually setting CA certificates.
Prevents unwanted parent CAs existing in PKI from being auto-included as may not be desired/intended.
(cherry picked from commit 952b1656f5164f6cfc601e040b48384859e7a222)
|
|
(cherry picked from commit 679b78356cbda4de15f96a7f22d4a98037dbeea4)
|
|
(cherry picked from commit f7834324d3d9edd7e161e7f2f3868452997c9c81)
|
|
interface with vrf
|
|
(cherry picked from commit 2ba435fa4bc8a5c9b2285fb9215ebc582bfb5fdf)
|
|
Users can not (FRR fails) commit the same network belonging to different OSPF
areas. Add verify() check to prevent this.
(cherry picked from commit c6d8d9c012da1a7566eec2dff70385457f073e64)
|
|
This is a leftover after commit 0e050cb35 (isis: T3417: drop artificial "domain"
node identifying the IS-IS process name). Drop all references to "process"
variable.
Specifying:
set protocols isis interface eth1
set protocols isis net '49.0001.1921.6825.5255.00'
set protocols isis redistribute ipv4 bgp
Triggered an exception
Traceback (most recent call last):
File "/usr/libexec/vyos/conf_mode/protocols_isis.py", line 309, in <module>
verify(c)
File "/usr/libexec/vyos/conf_mode/protocols_isis.py", line 158, in verify
f'"protocols isis {process} redistribute {afi} {proto}"!')
^^^^^^^
NameError: name 'process' is not defined
(cherry picked from commit 78212414e085d6261a32015553eb3e407f77792f)
|
|
* Move global state-policy smoketest to it's own test, verify conntrack
(cherry picked from commit 62bda3b082a79c2f31483dba5bfeb19464f6dbe2)
|
|
(cherry picked from commit e2df1f4929774792c1d4bfb78c2dfa5bdf7f0825)
|
|
radvd: T6118: add nat64prefix support RFC8781 (backport #3125)
|
|
Add support for pref64 option, as defined in RFC8781. The prefix valid lifetime
must not be smaller than the "interface interval max" definition which defaults
to 600.
set service router-advert interface eth1 nat64prefix 64:ff9b::/96
(cherry picked from commit f1ead5c6a16aba00699b8a5b9c18ef6cffe8cc4d)
|
|
Lower available CPU C states to a minimum if this option set. This will set
Kernel commandline options "intel_idle.max_cstate=0 processor.max_cstate=1".
(cherry picked from commit 3a3e0dff4ff1f80835eca6b2362d792e3ecacc8e)
|
|
(cherry picked from commit 1fbda31623054ee944d063f738e4d1d4170341ef)
|
|
Added health-check to sync-group in CLI
Don't use instance health-check when instance in sync group member
Disallow wrong healtch-check configurations
New smoke test
|
|
firewall|nat rules.
(cherry picked from commit 3c0634e572ffdecaf24a9dac16678427f22761ab)
|
|
If we have any `vpn ipsec` and `protocol nhrp` configuration we
get the empty configuration file `/run/opennhrp/opennhrp.conf`
after rebooting the system.
Use config dependency instead of the old `resync_nhrp` function
fixes this issue
(cherry picked from commit 689fea253d9019df20d5c6ac7fa22d5e8454afab)
|
|
(cherry picked from commit 6a97fdfa1ba9b4135a51498ea5acabb804256b2c)
|
|
(cherry picked from commit 298bcc5cb90c4c83981ec4baaaa0db785306867d)
|
|
Example:
vyos@vyos# set protocols ospfv3 redistribute bgp
Possible completions:
metric OSPF default metric
metric-type OSPF metric type for default routes (default: 2)
route-map Specify route-map name to use
(cherry picked from commit ed2c288c8a9031f91acf76d20b84e2002696981c)
|
|
(cherry picked from commit 3480d92a8c4d84e8c1f94a9362bac2be0cc77921)
|
|
Implement VyOS ASCII art contest winners logo as the default for our MOTD
(cherry picked from commit 0ea3a454cf560171d3eb9d4d1b97b172c06360fe)
|
|
required
(cherry picked from commit 6f7d1e15665655e37e8ca830e28d9650445c1217)
|
|
It does not make sense to perform the "podman login" command when setting up
containers, as images are not automatically pulled in from the registry - due
to issues with the default route during startup.
The same issue manifests in "podman login" where we can not login to a registry
unless there is a default route present.
This commit changes the behavior that the container registry is part of the
configuration, but it is only referenced during "add container image" and thus
never during system boot.
(cherry picked from commit baf30d8319ef4d0f0cc4cdf0f7c12f03f8a492b6)
|
|
In order to keep the proper priority list during system startup and on initial
setup/commit for this feature the dependent VXLAN code should not be called,
if the interface in question does not exist (yet).
(cherry picked from commit dbe8c613bb80bc8b714398825054ade5942ea75b)
|
|
* set system login user <name> disable
(cherry picked from commit 6e0b146ed3b90da577c3ecba38836883fd435e7a)
|
|
* set system ip nht no-resolve-via-default
* set system ipv6 nht no-resolve-via-default
(cherry picked from commit ece0e768f36e52f8964823d891264d7c187204ec)
|
|
Removed dhcp-interface option (l2tp)
Added wins-server (sstp)
Added description (ipoe, pppoe, sstp, pptp)
Added exteded-script (l2tp, sstp, pptp)
Added shaper (ipoe, pptp, sstp, l2tp)
Added limits (ipoe, pptp, sstp, l2tp)
Added snmp ( ipoe, pptp,sstp, l2tp)
Refactoring and reformated code.
(cherry picked from commit ac6a16f6c5ad7700789759e1ec093236c2e182a2)
|
|
(cherry picked from commit 78820752b936e77d30f995498ff36487c5c6af87)
|
|
(cherry picked from commit 0f8bf6bd0fb29cfd638e9920674e7ad1d1d25350)
|
|
(cherry picked from commit ac2d7dfac6073d0f232191ec494f78a8d12889e4)
|
|
set pki openssh rpki private key ...
set pki openssh rpki public key ...
set pki openssh rpki public type 'ssh-rsa'
(cherry picked from commit 8c78ef0879f22ffd4a5f7fdb175e9109b46e9d7b)
|