| Age | Commit message (Collapse) | Author |
|---|
|
Standardized pool configuration for all accel-ppp services.
1. Only named pools are used now.
2. Allows all services to use range in x.x.x.x/mask
and x.x.x.x-x.x.x.y format
3. next-pool can be used in all services
2. Allows to use in ipoe gw-ip-address without pool configuration
which allows to use Fraimed-IP-Address attribute by radius.
3. Default pool name should be explicidly configured
with default-pool.
4. In ipoe netmask and range subnet can be different.
(cherry picked from commit 422eb463d413da812eabc28706e507a9910d7b53)
|
|
We always enable HTTPS in ddclient configuration, however
`http://checkip.dyndns.org` is HTTP only and does not support HTTPS.
Warn the user if they are using this service.
Also, make `url` in `web-options` mandatory.
|
|
|
|
(cherry picked from commit a9201e77110ce0695e2ba879304aef41b7ac9a0c)
|
|
node_changed() will return a list of changed keys under "path". We are not
always interested what changed, sometimes we are only interested if something
changed at all, that what vyos.configdict.is_node_changed() is for.
(cherry picked from commit 5e7a8288d06a6d6beee5e1abd2e06698ab778650)
|
|
When deleting SNMP from CLI the 'delete' key was not honored in the config
dictionary, leading to a false process startup causing the following error:
Job for snmpd.service failed because the control process exited with error code.
See "systemctl status snmpd.service" and "journalctl -xeu snmpd.service" for details.
(cherry picked from commit 20b98e780fda4131eb242921884d4955147ce51a)
|
|
Match mark allows to use firewall marks of packet to use
a specific pool
Example of instance config /run/jool/instance-100.json
```
...
"pool4": [
{
"protocol": "TCP",
"prefix": "192.0.2.10",
"port range": "1-65535",
"mark": 23
},
...
```
(cherry picked from commit 8e1e79cfa24c155c8d504822fbbd3c20f890fb70)
|
|
nat66: T2898: build fix after ndp-proxy backport
|
|
|
|
T2898: add ndp-proxy service (backport #2665)
|
|
VyOS CLI command
set service ndp-proxy interface eth0 prefix 2001:db8::/64 mode 'static'
Will generate the following NDP proxy configuration
$ cat /run/ndppd/ndppd.conf
# autogenerated by service_ndp-proxy.py
# This tells 'ndppd' how often to reload the route file /proc/net/ipv6_route
route-ttl 30000
# This sets up a listener, that will listen for any Neighbor Solicitation
# messages, and respond to them according to a set of rules
proxy eth0 {
# Turn on or off the router flag for Neighbor Advertisements
router no
# Control how long to wait for a Neighbor Advertisment message before invalidating the entry (milliseconds)
timeout 500
# Control how long a valid or invalid entry remains in the cache (milliseconds)
ttl 30000
# This is a rule that the target address is to match against. If no netmask
# is provided, /128 is assumed. You may have several rule sections, and the
# addresses may or may not overlap.
rule 2001:db8::/64 {
static
}
}
(cherry picked from commit 4d721a58020971d00ab854c37b68e88359999f9c)
|
|
The Linux Kernel needs to be told if IPv6 SR enabled packets whether should be
processed or not. This is done using
/proc/sys/net/conf/<iface>/seg6_* variables:
seg6_enabled - BOOL
Accept or drop SR-enabled IPv6 packets on this interface.
Relevant packets are those with SRH present and DA = local.
0 - disabled (default)
not 0 - enabled
Or the VyOS CLI command:
* set protocols segment-routing interface eth0 srv6
(cherry picked from commit 774cc97eda61eb0b91df820797fb3c705d0073d5)
|
|
Enable/Disable VRF strict mode, when net.vrf.strict_mode=0 (default) it is
possible to associate multiple VRF devices to the same table. Conversely, when
net.vrf.strict_mode=1 a table can be associated to a single VRF device.
A VRF table can be used by the VyOS CLI only once (ensured by verify()), this
simply adds an additional Kernel safety net, but a requirement for IPv6 segment
routing headers.
(cherry picked from commit 10701108fecb36f7be7eb7ef5f1e54e63da5fb4e)
|
|
when no API keys are set
(cherry picked from commit 7bad0e115ecc25224a0c3a2720a2697442624229)
|
|
Add ability to configure multiple SSL certificates for
frontend/service
set load-balancing reverse-proxy service web mode http
set load-balancing reverse-proxy service web port 443
set load-balancing reverse-proxy service web ssl certificate cert1
set load-balancing reverse-proxy service web ssl certificate cert2
(cherry picked from commit fe99c45e05fd5794905145ddca80e6078145c2e8)
|
|
Add recursive_defaults values for BGP "get_config" dictionary.
(cherry picked from commit 4d5445740a1529691594263af22f2a9d07bbfe70)
|
|
Add BMP feature.
BMP (BGP Monitoring Protocol, RFC 7854) is used to send monitoring
data from BGP routers to network management entities
https://docs.frrouting.org/en/latest/bmp.html
Example:
set system frr bmp
commit
run restart bgp
set protocols bgp system-as '65001'
set protocols bgp neighbor 192.0.2.11 address-family ipv4-unicast
set protocols bgp neighbor 192.0.2.11 remote-as '65001'
set protocols bgp bmp mirror-buffer-limit '256000000'
set protocols bgp bmp target foo address '127.0.0.1'
set protocols bgp bmp target foo port '5000'
set protocols bgp bmp target foo min-retry '1000'
set protocols bgp bmp target foo max-retry '2000'
set protocols bgp bmp target foo mirror
set protocols bgp bmp target foo monitor ipv4-unicast post-policy
set protocols bgp bmp target foo monitor ipv4-unicast pre-policy
set protocols bgp bmp target foo monitor ipv6-unicast post-policy
set protocols bgp bmp target foo monitor ipv6-unicast pre-policy
(cherry picked from commit 5523fccf4f7d05444c36c568128e94cd7b08c34f)
|
|
This allows the operator to control the number of open file descriptors each
daemon is allowed to start with. The current assumed value on most operating
systems is 1024.
If the operator plans to run bgp with several thousands of peers then this is
where we would modify FRR to allow this to happen.
set system frr descriptors <n>
(cherry picked from commit 892c28ccf634173d4c4952c248cb03974c560793)
|
|
VyOS CLI
set protocols segment-routing srv6 locator bar prefix '2001:b::/64'
set protocols segment-routing srv6 locator foo behavior-usid
set protocols segment-routing srv6 locator foo prefix '2001:a::/64'
Will generate in FRR
segment-routing
srv6
locators
locator bar
prefix 2001:b::/64 block-len 40 node-len 24 func-bits 16
exit
!
locator foo
prefix 2001:a::/64 block-len 40 node-len 24 func-bits 16
behavior usid
exit
!
exit
!
exit
!
exit
(cherry picked from commit ca301cdd4746187f96ff84e411fda6a84e33f237)
|
|
set protocols bgp sid vpn per-vrf export '99'
set protocols bgp srv6 locator 'foo'
set protocols bgp system-as '100'
Will generate in FRR config
router bgp 100
no bgp ebgp-requires-policy
no bgp default ipv4-unicast
no bgp network import-check
!
segment-routing srv6
locator foo
exit
sid vpn per-vrf export 99
exit
(cherry picked from commit af46fe54e56cf85d13b62ee771bec3d80f225ac5)
|
|
Dynamic interfaces such as PPPoE/sstpc can not exist during
verification dns dynamic. As they added and removed dynamically.
Add interface_filter to exclude them from checks
(cherry picked from commit 0a1c9bc38440c86cbbc016fb6d8f7d6f36993652)
|
|
The initial version always enabled Google authenticator (2FA/MFA) support by
hardcoding the PAM module for sshd and login.
This change only enables the PAM module on demand if any use has 2FA/MFA
configured. Enabling the module is done system wide via pam-auth-update by
using a predefined template.
Can be tested using:
set system login user vyos authentication plaintext-password vyos
set system login user vyos authentication otp key 'QY735IG5HDHBFHS5W7Y2A4EM274SMT3O'
See https://docs.vyos.io/en/latest/configuration/system/login.html for additional
details.
(cherry picked from commit e134dc4171b051d0f98c7151ef32a347bc4f87e2)
|
|
T160: add NAT64 (backport #2578)
|
|
- Update the base (rebase)
- Move include/nat64-protocol.xml.i => include/nat64/protocol.xml.i
- Delete unwanted `write_json`, use `write_file` instead
- Remove unnecessary deleting of default values for tagNodes T2665
- Add smoketest
Example:
```
set interfaces ethernet eth0 address '192.168.122.14/24'
set interfaces ethernet eth0 address '192.168.122.10/24'
set interfaces ethernet eth2 address '2001:db8::1/64'
set nat64 source rule 100 source prefix '64:ff9b::/96'
set nat64 source rule 100 translation pool 10 address '192.168.122.10'
set nat64 source rule 100 translation pool 10 port '1-65535'
```
(cherry picked from commit 336bb5a071b59264679be4f4f9bedbdecdbe2834)
|
|
Signed-off-by: Joe Groocock <me@frebib.net>
(cherry picked from commit 7d49f7079f1129c2fadc7f38ceb230804d89e177)
# Conflicts:
# debian/control
|
|
Modify the configuration path to be consistent with the usual dialects
of VyoS configuration (wireguard, dns, firewall, etc.)
This would also shorten the configuration path and have a unified
treatment for RFC2136-based updates and other 'web-service' based updates.
While at it, add support for per-service web-options. This would allow
for probing different external URLs on a per-service basis.
|
|
|
|
|
|
ddclient: T5573,T5574,T5612,T5708: Backport ddclient related changes
|
|
Additionally, templatize system service override and move it to the
runtime path.
(cherry picked from commit eb906739047187c322b6ce9efe7c9479bed9a024)
|
|
Add additional smoketests for web-options validation.
Also, format error messages to optionally include protocol name.
|
|
- Migrate to ddclient 3.11.1 and enforce debian/control dependency
- Add dual stack support for additional protocols
- Restrict usage of `porkbun` protocol, VyOS configuration structure
isn't compatible with porkbun yet
- Improve and cleanup error messages
|
|
`web-options` is only applicable when using HTTP(S) web request to
obtain the IP address. Apply guard for that.
|
|
Add support for per-service cache management for ddclient providers
via `wait-time` and `expiry-time` options. This allows for finer-grained
control over how often a service is updated and how long the hostname
will be cached before being marked expired in ddclient's cache.
More specifically, `wait-time` controls how often ddclient will attempt
to check for a change in the hostname's IP address, and `expiry-time`
controls how often ddclient to a forced update of the hostname's IP
address.
These options intentionally don't have any default values because they
are provider-specific. They get treated similar to the other provider-
specific options in that they are only used if defined.
|
|
Additional cleanup and refactoring for ddclient scripts including the
smotektests.
|
|
dyndns2 protocol in ddclient honors dual stack for selective servers
because of the way it is implemented in ddclient.
We formalize the well known servers that support dual stack in a list
and check against it when validating the configuration.
|
|
Enable TTL support for web-service based protocols in addition to
RFC2136 based (nsupdate) protocol.
Since TTL is not supported by all protocols, and thus cannot have a
configuration default, the existing XML snippet `include/dns/time-to-live.xml.i`
does not have common `<defaultValue>300</defaultValue>` anymore and is
instead added explicitly whenever necessary.
|
|
Fix VRF support interface definition and configuration mode for ddclient
to actually capture the VRF name and pass it to the template.
|
|
unless PAM auth is enabled for GraphQL
(cherry picked from commit 8c450ea7f538beb0b2cd21d35c05d18db49a1802)
|
|
This fixes the implementation in e062a8c11 ("pppoe: T5630: allow to specify MRU
in addition to already configurable MTU") and restores the bahavior that MRU
defaults to MTU if MRU is not explicitly set.
This was the behavior in VyOS 1.3.3 and below before we added ability to define
the MRU value.
(cherry picked from commit ffd7339e2ea3eafdd97ac0763ca4a3913fe71bf3)
|
|
In a service provider network a service provider typically supports multiple
bridge domains with overlapping vlans. One bridge domain per customer. Vlans in
each bridge domain are mapped to globally unique VXLAN VNI ranges assigned to
each customer.
Without the ability of VNI filtering, we can not provide VXLAN tunnels
with multiple tenants all requiring e.g. VLAN 10.
To Test:
set interfaces vxlan vxlan987 parameters external
set interfaces vxlan vxlan987 source-interface eth0
set interfaces vxlan vxlan987 parameters vni-filter
set interfaces vxlan vxlan987 vlan-to-vni 50 vni 10050
set interfaces vxlan vxlan987 vlan-to-vni 51 vni 10051
set interfaces vxlan vxlan987 vlan-to-vni 52 vni 10052
set interfaces vxlan vxlan987 vlan-to-vni 53 vni 10053
set interfaces vxlan vxlan987 vlan-to-vni 54 vni 10054
set interfaces vxlan vxlan987 vlan-to-vni 60 vni 10060
set interfaces vxlan vxlan987 vlan-to-vni 69 vni 10069
set interfaces bridge br0 member interface vxlan987
Add new op-mode command: show bridge vni
Interface VNI
----------- -----------
vxlan987 10050-10054
vxlan987 10060
vxlan987 10069
(cherry picked from commit 35f6033d21053fa420e837f157cd9377a4ccd26a)
|
|
This complements commit f5e43b136 ("http: T5762: api: make API socket backend
communication the one and only default") so we have a consistent port CLI node
across VyOS components.
(cherry picked from commit 0e885f1bf01424130b6876e769cc42612b19351b)
|
|
|
|
PAM: T5577: Backported PAM settings from circinus
|
|
Why: Smoketests fail as they can not establish IPv6 connection to uvicorn
backend server.
https://github.com/vyos/vyos-1x/pull/2481 added a bunch of new smoketests.
While debugging those failing, it was uncovered, that uvicorn only listens on
IPv4 connections
vyos@vyos# netstat -tulnp | grep 8080
(Not all processes could be identified, non-owned process info
will not be shown, you would have to be root to see it all.)
tcp 0 0 127.0.0.1:8080 0.0.0.0:* LISTEN -
As the CLI already has an option to move the API communication from an IP to a
UNIX domain socket, the best idea is to make this the default way of
communication, as we never directly talk to the API server but rather use the
NGINX reverse proxy.
(cherry picked from commit f5e43b1361fb59a9c260739bdb28729d5119507c)
|
|
In CLI we can choose authentication logic:
- `mandatory` - if TACACS+ answered with `REJECT`, authentication must be
stopped and access denied immediately.
- `optional` (default) - if TACACS+ answers with `REJECT`, authentication
continues using the next module.
In `mandatory` mode authentication will be stopped only if TACACS+ clearly
answered that access should be denied (no user in TACACS+ database, wrong
password, etc.). If TACACS+ is not available or other errors happen, it will be
skipped and authentication will continue with the next module, like in
`optional` mode.
|
|
In CLI we can choose authentication logic:
- `mandatory` - if RADIUS answered with `Access-Reject`, authentication must
be stopped and access denied immediately.
- `optional` (default) - if RADIUS answers with `Access-Reject`,
authentication continues using the next module.
In `mandatory` mode authentication will be stopped only if RADIUS clearly
answered that access should be denied (no user in RADIUS database, wrong
password, etc.). If RADIUS is not available or other errors happen, it will be
skipped and authentication will continue with the next module, like in
`optional` mode.
|
|
(cherry picked from commit 64b4cfc71d402222fd6b034336b3588b5986ba24)
|
|
(cherry picked from commit 403d2ffd6e46cb082b1d16ddf515e1784bee968c)
# Conflicts:
# data/templates/frr/pim6d.frr.j2
# interface-definitions/protocols-pim6.xml.in
# smoketest/scripts/cli/test_protocols_pim6.py
# src/conf_mode/protocols_pim6.py
|
|
(cherry picked from commit dd13213ae94f071bc30cc17f5fabef02fbf95939)
|
