| Age | Commit message (Collapse) | Author |
|---|
|
Service config-sync allows synchronizing a section of
the configuration.
As PoC allow only nat, nat66 and firewall sections
Rertreive the configuration for a section from self node and
send this configuration to the section of the 'secondary' node.
This feature adds a symlink from helper 'vyos_config_sync.py'
to '/config/scripts/commit/post-hooks.d' and config that is
located in '/run/config_sync_conf.conf'
It will synchronyze the config only if the setcion
was changed.
set service config-sync secondary address 192.0.2.11
set service config-sync secondary key xxx
set service config-sync section nat
set service config-sync section nat66
set service config-sync section firewall
set service config-sync mode load
|
|
T5304: Container add volume bind propagation option
|
|
set container name c1 volume myvlm propagation rshared
|
|
|
|
Check upper bound as defined in Debian Policy Manual. Without this
check, user 'nobody' will not be available.
|
|
|
|
|
|
... this is a step towards a new and better implementation that will utilize
VPP.
|
|
|
|
Prevent failure when the user enters a partial CLI command without any
address specified.
Also, apply some minor formatting changes.
|
|
T5260: Do not use deprecated python crypt module
|
|
Remove the quotes, this will always return the hash for string "password".
|
|
|
|
Templatize systemd override for ddclient service and move the generated
override files in /run. This ensures that the override files are always
generated afresh after boot.
Additionally, simplify the systemd override file by removing the
redundant/superfluous overrides.
|
|
|
|
|
|
ddclient implementation of dualstack for dyndns2 protocol is targeted
for dyn.com (dyndns.org) only. Dualstack won't work for other servers
supporting dyndns2 protocol (for example, dyn.dns.he.net).
|
|
Apply next round of configuration tree updates to 'service dns dynamic'
with the following changes:
- Migrate `service dns dynamic interface <interface> [use-web]`
to `service dns dynamic address <interface>`
or `service dns dynamic address web [web-options]`
This communicates the intent that dynamic dns IP address is detected
in only one way - using the `<interface>` or using an external web
request, not both.
- When using external web request, (`service dns dynamic address web`),
external url is optional (`web-options url`). Ddclient defaults are
used when unspecified,
- Rename all config `login` to `username` for consistency and also to
align better with alternative ddclient backends in consideration.
- Apply global 'ipv6-enable' to per service 'ip-version: ipv6'. Selecting
usage of IPv4 or IPv6 (or both simultaneously) is now at per service
(protocol) level instead of global level. This allows more control on
the ability to select IPv4 in some cases and IPv6 in some other cases
wherever supported by the underlying ddclient protocol.
- While the IP address (and by extension, the detection mechanism) is
global, the way it is applied to a particular ddclient protocol depends
on whether it supports IPv4 or IPv6 or both.
- Related to the above, this also prevents generating incorrect config
file (`ddclient.conf`) with multiple global sections leading to an
unpredictable behavior of ddclient.
- Implement provider (protocol) specific custom tweaks whenever possible
(e.g., `zone`, `username`, `server` are not necessary in all cases).
- Move service name from a combination of 'protocol' (with protocol
config autodetected) and custom (with protocol config specified) to a
single 'service' key. This allows for consisent setup of multiple
config for the same ddclient protocol (with different options and
credentials). This also avoid ambiguity with usual networking term
'protocol' and ddclient specific term 'protocol' (and can change with
a move to a different backend).
- Apply upfront XML constraints and validations consistently wherever
applicable.
- RFC2136 specific change: Rename rfc2136 config `record` to `host-name`
for consistency.
- Cloudflare specific change: While ddclient still supports authenticating
with email and global auth key, skipping `username` in config will
indicate the intent to use API token authentication (with special
'token' literal as `username`).
|
|
|
|
|
|
|
|
T5210:VPN:Fix typo in Warning
|
|
|
|
|
|
This is a radvd limitation.
|
|
|
|
To accept a Proxy Protocol header on incoming TCP connections,
add an accept-proxy parameter to the bind line in a frontend section.
This parameter detects both Proxy Protocol version 1 (text format)
and Proxy Protocol version 2 (binary format).
set load-balancing reverse-proxy backend <tag> server <tag> send-proxy
|
|
Improve and refactoring "load-balancing reverse-proxy"
- replace 'reverse-proxy server <tag>'
=> 'reverse-proxy service <tag>'
- replace 'reverse-proxy global-parameters tls <xxx>'
=> 'reverse-proxy global-parameters tls-version-min xxx'
=> 'reverse-proxy global-parameters ssl-bind-ciphers xxx'
- replace 'reverse-proxy service https rule <tag> set server 'xxx'
=> 'reverse-proxy service https rule <tag> set backend 'xxx'
'service https rule <tag> domain-name xxx' set as multinode
|
|
T5222: Add load-balancing for web traffic
|
|
|
|
Avoids the following warning, and any external service from
re-activating syslog via systemd socket activation:
frebib@vyos# commit
[ system syslog ]
DEBUG/COMMAND returned (err):
Warning: Stopping syslog.service, but it can still be activated by:
syslog.socket
DEBUG/COMMAND cmd 'systemctl stop syslog.service'
Signed-off-by: Joe Groocock <me@frebib.net>
|
|
os.unlink() is the correct function:
Traceback (most recent call last):
File "/usr/libexec/vyos/conf_mode/system-syslog.py", line 146, in <module>
generate(c)
File "/usr/libexec/vyos/conf_mode/system-syslog.py", line 114, in generate
os.path.unlink(rsyslog_conf)
^^^^^^^^^^^^^^
AttributeError: module 'posixpath' has no attribute 'unlink'
Signed-off-by: Joe Groocock <me@frebib.net>
|
|
There is no need for the backend code to call ethtool and try to change speed or
duplex settings every time there is a change in the interface configuration,
but no change for the speed/duplex subnodes. This also makes the commit itself
faster when working with ethernet interfaces.
Bonus: no repeating CLI messages that the driver does not support speed/duplex
changes, as we do not change anything here.
Extension to commit f2ecc9710 ("ethernet: T3891: honor auto-negotiation support
per NIC")
|
|
When enabling identity-based-config, users can add arbitrary config keys
that are processed by ocserv. The user "must know" what he is been doing, as
invalid config option will make the ocserv daemon go ... whoop!
Thus add a warning and inform the user about this setting.
|
|
ocserv: T3896: add CLI options to configure ocserv config-per-user/group
|
|
T5219: ddclient: Allow not set login for Cloudflare API token
|
|
|
|
|
|
T5215: add a built-in ping check for VRRP groups
|
|
|
|
Add RADIUS accounting-interim-interval option for PPTP-server
Specifies interval in seconds to send accounting information
(may be overridden by radius Acct-Interim-Interval attribute)
set vpn pptp remote-access authentication radius accounting-interim-interval '52'
|
|
Add RADIUS accounting-interim-interval option for L2TP-server
Specifies interval in seconds to send accounting information
(may be overridden by radius Acct-Interim-Interval attribute)
set vpn l2tp remote-access authentication radius accounting-interim-interval '120'
|
|
T5060: Add disable option for high-availability
|
|
syslog: T2778: T2769: refactoring and VRF support
|
|
|
|
Allow syslog messages to be sent through a VRF (e.g. management).
|
|
|
|
Add 'maintenance mode' (option disable) for high-availability
set high-availability disable
|
|
Use 'vyos-wan-load-balance.service' for load-balancing instead of
old start and stop 'vyatta-wanloadbalance.init' script
|
|
|
