Age | Commit message (Collapse) | Author |
|
T6075: firewall and NAT: check if interface-group exists when using them in firewall|nat rules.
|
|
Lower available CPU C states to a minimum if this option set. This will set
Kernel commandline options "intel_idle.max_cstate=0 processor.max_cstate=1".
|
|
firewall|nat rules.
|
|
T6084: Add NHRP dependency for IPsec and fix NHRP empty config bug
|
|
If we have any `vpn ipsec` and `protocol nhrp` configuration we
get the empty configuration file `/run/opennhrp/opennhrp.conf`
after rebooting the system.
Use config dependency instead of the old `resync_nhrp` function
fixes this issue
|
|
|
|
|
|
Example:
vyos@vyos# set protocols ospfv3 redistribute bgp
Possible completions:
metric OSPF default metric
metric-type OSPF metric type for default routes (default: 2)
route-map Specify route-map name to use
|
|
T5504: Keepalived VRRP ability to set more than one peer-address
|
|
Implement VyOS ASCII art contest winners logo as the default for our MOTD
|
|
|
|
required
|
|
It does not make sense to perform the "podman login" command when setting up
containers, as images are not automatically pulled in from the registry - due
to issues with the default route during startup.
The same issue manifests in "podman login" where we can not login to a registry
unless there is a default route present.
This commit changes the behavior that the container registry is part of the
configuration, but it is only referenced during "add container image" and thus
never during system boot.
|
|
In order to keep the proper priority list during system startup and on initial
setup/commit for this feature the dependent VXLAN code should not be called,
if the interface in question does not exist (yet).
|
|
login: T5972: add possibility to disable individual local user accounts
|
|
* set system login user <name> disable
|
|
T6001: add option to disable next-hop-tracking resolve-via-default
|
|
* set system ip nht no-resolve-via-default
* set system ipv6 nht no-resolve-via-default
|
|
T6029: Rewritten Accel-PPP services to an identical feature set
|
|
Removed dhcp-interface option (l2tp)
Added wins-server (sstp)
Added description (ipoe, pppoe, sstp, pptp)
Added exteded-script (l2tp, sstp, pptp)
Added shaper (ipoe, pptp, sstp, l2tp)
Added limits (ipoe, pptp, sstp, l2tp)
Added snmp ( ipoe, pptp,sstp, l2tp)
Refactoring and reformated code.
|
|
|
|
|
|
|
|
|
|
set pki openssh rpki private key ...
set pki openssh rpki public key ...
set pki openssh rpki public type 'ssh-rsa'
|
|
T5960: Rewritten authentication node in PPTP to a single view
|
|
Hide unexpected output by attempts of deleting `qdisc` from
interfaces
[ qos ]
Error: Cannot find specified qdisc on specified device.
Error: Cannot delete qdisc with handle of zero.
|
|
vrf: T5973: module is now statically compiled into the kernel
|
|
vpn: T3843: l2tp configuration not cleared after delete
|
|
Rewritten authentication node in accel-ppp services
to a single view. In particular - PPTP authentication.
|
|
Always enable VRF strict_mode
|
|
Fix verify error for the VPN OpenConnect configuration with
local authentication and without any user
File "/usr/libexec/vyos/conf_mode/vpn_openconnect.py", line 94, in verify
if not ocserv["authentication"]["local_users"]:
KeyError: 'local_users'
|
|
vpn: T5926: IPSEC does not apply after l2tp configuration was changed
added dependency between l2tp and ipsec conf
added test for apply config to swanctl
|
|
|
|
dhcpv6: T3771: Installation of routes for delegated prefixes, add excluded-prefix to PD
|
|
container: T5955: add uid/gid settings
|
|
|
|
T5971: Rewritten ppp options in accel-ppp services
|
|
T4839: firewall: Add dynamic address group in firewall configuration
|
|
ddclient: T5966: Adjust dynamic dns config address subpath
|
|
Denied using command 'route-target vpn export/import'
with 'both' together in bgp configuration.
|
|
vrf: T5973: multiple bugfixes and improvements
|
|
Rewritten 'ppp-options' to the same view in all accel-ppp services.
Adding IPv6 support to PPTP.
|
|
appropiate commands to populate such groups using source and destination address of the packet.
|
|
|
|
|
|
* set protocols bfd peer <x.x.x.x> minimum-ttl <1-254>
* set protocols bfd profile <name> minimum-ttl <1-254>
|
|
A code path was missing to check if only priority is available in the result of
"ip --json -4 rule show", in the case of l3mdev it's a dedicated key!
|
|
There is no need to add and remove this table during runtime - it can lurk
in the standard firewall init code.
|
|
|