summaryrefslogtreecommitdiff
path: root/src/conf_mode
AgeCommit message (Collapse)Author
2024-01-22dhcp: T5787: Allow disabled duplicates on static-mappingsarthurdev
2024-01-22Merge pull request #2869 from c-po/sflow-t5968Viacheslav Hletenko
sflow: T5968: add VRF support
2024-01-22sflow: T5968: add VRF supportChristian Breunig
Add support to run hsflowd in a dedicated (e.g. management) VRF. Command will be "set system sflow vrf <name>" like with any other service
2024-01-21dns: T5959: Streamline dns forwarding serviceIndrajit Raychaudhuri
Streamline configuration and operation of dns forwarding service in following ways: - Remove `dns_forwarding_reset.py` as its functionality is now covered by `dns.py` - Adjust function names in `dns.py` to disambiguate between DNS forwarding and dynamic DNS - Remove `dns_forwarding_restart.sh` as its functionality is inlined in `dns-forwarding.xml` - Templatize systemd override for `pdns-recursor.service` and move the generated override files in /run. This ensures that the override files are always generated afresh after boot - Simplify the systemd override file by removing the redundant overrides - Relocate configuration path for pdns-recursor to `/run/pdns-recursor` and utilize the `RuntimeDirectory` default that pdns-recursor expects - We do not need to use custom `--socket-dir` path anymore, the default path (viz., `/run/pdns-recursor` is fine)
2024-01-21Merge pull request #2863 from c-po/ntp-T5692Christian Breunig
ntp: T5692: add support to configure leap second behavior
2024-01-21Merge pull request #2852 from sever-sever/T5958Viacheslav Hletenko
T5958: QoS add basic implementation of policy shaper-hfsc
2024-01-21ntp: T5692: add support to configure leap second behaviorChristian Breunig
* set service ntp leap-second [ignore|smear|system|timezone] Where timezone is the new and old default resulting in adding "leapsectz right/UTC" to chrony.conf. The most prominent new option is "smear" which will add leapsecmode slew maxslewrate 1000 smoothtime 400 0.001 leaponly to chrony. See https://chrony-project.org/doc/4.3/chrony.conf.html leapsecmode for additional information
2024-01-18Merge pull request #2839 from josephillips85/currentChristian Breunig
dhcp: T5952: Fix validate duplicate MAC Address on same subnet
2024-01-18dhcp: T5952: validate duplicate DUID in static-mappings incl. smoketestsChristian Breunig
2024-01-18T5958: QoS add basic implementation of policy shaper-hfscViacheslav Hletenko
QoS policy shaper-hfsc was not implemented after rewriting the traffic-policy to qos policy. We had CLI but it does not use the correct class. Add a basic implementation of policy shaper-hfsc. Write the class `TrafficShaperHFS`
2024-01-18dhcp: T5952: Fix validate duplicate MAC Address on same subnetJose Phillips
2024-01-17Merge pull request #2832 from aapostoliuk/T5865-circinusChristian Breunig
T5865: Moved ipv6 pools to named ipv6 pools in accel-ppp
2024-01-16dhcp: T5952: Fix validate duplicate MAC Address on same subnetJose Phillips
2024-01-16Merge pull request #2818 from jestabro/serial-console-config-modeDaniil Baturin
image-tools: T5923: update system_console.py for new GRUB file structure
2024-01-16bgp: T5937: fix migration script for IPv6 AFI peer-groupChristian Breunig
Migrate "bgp <ASN> neighbor <NEIGH> address-family ipv6-unicast peer-group" to "bgp neighbor <NEIGH> peer-group"
2024-01-16T5865: Moved ipv6 pools to named ipv6 pools in accel-pppaapostoliuk
Moved ipv6 pools to named ipv6 pools in accel-ppp services
2024-01-14bgp: T591: add SRv6 per address-family SID supportChristian Breunig
set protocols bgp address-family ipv4-unicast sid vpn export <auto|1-1048575> set protocols bgp address-family ipv6-unicast sid vpn export <auto|1-1048575>
2024-01-13Merge pull request #2817 from sarthurdev/kea6-optionsChristian Breunig
dhcpv6: T3316: Extend scope of DHCP options, bugfixes
2024-01-12image-tools: T5923: update system_console.py for new GRUB file structureJohn Estabrook
Add util function to set serial console speed in accordance with revised GRUB file structure; in keeping with the intentions of the config_mode script, adjust the GRUB var 'console_speed' to only modify ttyS0.
2024-01-13dhcpv6: T3316: Move options to separate node and extend scopessarthurdev
* Also migrate `address-range` to `range` tag node for consistency with dhcpv4 server syntax
2024-01-12bgp: T5306: fix verify_remote_as() to support v6only interface with peer-groupChristian Breunig
To test: set protocols bgp neighbor eth0 interface v6only peer-group 'fabric' set protocols bgp peer-group fabric address-family ipv4-unicast set protocols bgp peer-group fabric address-family ipv6-unicast set protocols bgp peer-group fabric capability extended-nexthop set protocols bgp peer-group fabric remote-as 'external' set protocols bgp system-as 64496
2024-01-11ipsec: T5918: warn when dynamic interfaces are used to bind ipsec daemonChristian Breunig
Fix after commit 8452d8f4921 ("T5918: Fix typo in verify vpn ipsec interface") so that dynamic interfaces can be used by ipsec but a warning is issued that this will only work after they are available on the system. PPPoE interfaces are the best example for this, as they are down during system bootup and will be available anytime after the boot once we've dialed into the BRAS.
2024-01-11dns: T5791: use common pattern for exclude check of dynamic interfacesChristian Breunig
This uses a more common pattern froma base class while the original code from 0a1c9bc38 ("T5791: DNS dynamic exclude check for dynamic interfaces PPPoE") is still retained.
2024-01-11dhcp: dhcpv6: T3316: Add `subnet-id` so leases remain mapped to entries in ↵Simon
the lease file (#2796)
2024-01-10T5918: Fix typo in verify vpn ipsec interfaceViacheslav Hletenko
The correct CLI command is `interface` and not `interfaces` ``` set vpn ipsec interface xxx ```
2024-01-10Merge pull request #2777 from aapostoliuk/T5688-multirangeChristian Breunig
T5688: Changed 'range' to multi in 'client-ip-pool' for accell-ppp
2024-01-10Merge pull request #2785 from sarthurdev/kea-optionsChristian Breunig
dhcp: T3316: T5787: T5912: Extend scope of DHCP options, bugfixes
2024-01-09T5916: Added segment routing check for index base size and SRGB base sizeCheeze_It
2024-01-10dhcp: T5787: Prevent duplicate IP addresses on static mappingssarthurdev
2024-01-10dhcp: T3316: Fix `listen-address` handling and add `listen-interface` as ↵sarthurdev
supported by Kea
2024-01-09T5688: Changed 'range' to multi in 'client-ip-pool' for accell-pppaapostoliuk
Changed node 'range' to multi in 'client-ip-pool' for accell-ppp services. Added completionHelp to default-pool and next-pool. Fixed verification in vpn l2tp config script.
2024-01-09pki: T5911: fix service update algorithm if certificate name contains a ↵Christian Breunig
hyphen (-) When testing for changed PKI certificates using node_changed(), we should not use key_mangling=('-', '_'), as this will make certificate updates with a hypen not possible.
2024-01-09https: T5902: remove virtual-host configurationChristian Breunig
We have not seen the adoption of the https virtual-host CLI option. What it did? * Create multiple webservers each listening on a different IP/port (but in the same VRF) * All webservers shared one common document root * All webservers shared the same SSL certificates * All webservers could have had individual allow-client configurations * API could be enabled for a particular virtual-host but was always enabled on the default host This configuration tried to provide a full webserver via the CLI but VyOS is a router and the Webserver is there for an API or to serve files for a local-ui. Changes Remove support for virtual-hosts as it's an incomplete and thus mostly useless "thing". Migrate all allow-client statements to one top-level allow statement.
2024-01-07pki: T5905: do not use expand_nodes=Diff.ADD|Diff.DELETE) in node_changed()Christian Breunig
This fixes a priority inversion when doing initial certificate commits. * pki subsystem is executed with priority 300 * vti uses priority 381 * ipsec uses priority 901 On commit pki.py will be executed first, detecting a change in dependencies for vpn_ipsec.py which will be executed second. The VTI interface was yet not created leading to ConfigError('VTI interface XX for site-to-site peer YY does not exist!') The issue is caused by this new line of code in commit b8db1a9d7ba ("pki: T5886: add support for ACME protocol (LetsEncrypt)") file src/conf_mode/pki.py line 139 which triggers the dependency update even if a key is newly added. This commit changes the "detection" based on the cerbot configuration on disk.
2024-01-07ipsec: T5905: use interface_exists() wrapper over raw calls to os.path.exists()Christian Breunig
2024-01-06https: T5886: migrate https certbot to new "pki certificate" CLI treeChristian Breunig
2024-01-06pki: T5886: add support for ACME protocol (LetsEncrypt)Christian Breunig
The "idea" of this PR is to add new CLI nodes under the pki subsystem to activate ACME for any given certificate. vyos@vyos# set pki certificate NAME acme Possible completions: + domain-name Domain Name email Email address to associate with certificate listen-address Local IPv4 addresses to listen on rsa-key-size Size of the RSA key (default: 2048) url Remote URL (default: https://acme-v02.api.letsencrypt.org/directory) Users choose if the CLI based custom certificates are used set pki certificate EXAMPLE acme certificate <base64> or if it should be generated via ACME. The ACME server URL defaults to LetsEncrypt but can be changed to their staging API for testing to not get blacklisted. set pki certificate EXAMPLE acme url https://acme-staging-v02.api.letsencrypt.org/directory Certificate retrieval has a certbot --dry-run stage in verify() to see if it can be generated. After successful generation, the certificate is stored in under /config/auth/letsencrypt. Once a certificate is referenced in the CLI (e.g. set interfaces ethernet eth0 eapol certificate EXAMPLE) we call vyos.config.get_config_dict() which will (if with_pki=True is set) blend in the base64 encoded certificate into the JSON data structure normally used when using a certificate set by the CLI. Using this "design" does not need any change to any other code referencing the PKI system, as the base64 encoded certificate is already there. certbot renewal will call the PKI python script to trigger dependency updates.
2024-01-04T5159: nat: add option to map network and ports. Feature used for large ↵Nicolás Fort
deployments in cgnat. (#2694)
2024-01-04configdict: T5894: add get_config_dict() flag with_pkiChristian Breunig
VyOS has several services relaying on the PKI CLI tree to retrieve certificates. Consuming services like ethernet, openvpn or ipsec all re-implemented the same code to retrieve the certificates from the CLI. This commit extends the signature of get_config_dict() with a new option with_pki that defaults to false. If this option is set, the PKI CLI tree will be blended into the resulting dictionary.
2024-01-01Merge pull request #2728 from c-po/verify-T5880Viacheslav Hletenko
T5880: verify_source_interface() should not allow dynamic interfaces like ppp, l2tp, ipoe or sstpc client interfaces
2024-01-01tunnel: T5879: properly verify source-interface used for tunnelsChristian Breunig
A tunnel interface can not properly be sourced from a pppoe0 interface when such interface is not (yet) connected to the BRAS. It might work on a running system, but subsequent reboots will fail as the source-interface most likely does not yet exist.
2024-01-01login: T5875: restore home directory permissions only when neededChristian Breunig
This improves commit 3c990f49e ("login: T5875: restore home directory permissions when re-adding user account") in a way that the home directory owner is only altered if it differs from the expected owner. Without this change on every boot we would alter the owner which could increase the boot time if the home of a user is cluttered.
2023-12-31T5474: establish common file name pattern for XML conf mode commandsChristian Breunig
We will use _ as CLI level divider. The XML definition filename and also the Python helper should match the CLI node. Example: set interfaces ethernet -> interfaces_ethernet.xml.in set interfaces bond -> interfaces_bond.xml.in set service dhcp-server -> service_dhcp-server-xml.in
2023-12-31Merge pull request #2696 from indrajitr/kea-lfc-fixChristian Breunig
dhcp: T3316: Adjust kea lease files' location and permissions
2023-12-30Merge pull request #2716 from c-po/login-t5875Christian Breunig
login: T5875: restore home directory permissions when re-adding user account
2023-12-29system: T5877: Shorten system domain-search config pathIndrajit Raychaudhuri
Shorten and simplify `system domain-search` config path from: ``` set system domain-search domain <domain1> ``` to: ``` set system domain-search <domain1> ``` This will shorten the path and also make consistent with `domain-search` config in other places (like `dhcp-server`).
2023-12-29login: T5875: restore home directory permissions when re-adding user accountChristian Breunig
After deleting a user account and working with a newly added account, we see that after rebooting in the previously saved configuration, the user is re-added but it's home directory might have an old UID set on the filesystem. This is due to the fact that vyos config does not store UIDs. When adding a user account to the system we now check if the home directory already exists and adjust the ownership to the new UID.
2023-12-29nat: T5681: relax wording on non existing interface Warning messageChristian Breunig
Remove the word "error" from a Warning only message to not irritate the user.
2023-12-29dhcp: T3316: Adjust kea lease files' location and permissionsIndrajit Raychaudhuri
Move the kea lease file to a separate directory `/config/dhcp` that `kea` process can write to so that subprocesses spawned by `kea` process can operate on the lease files. To allow `kea` process to write to `/config/dhcp`, add `_kea` user to `vyattacfg` group. And the lease files are owned completely by `_kea` user to play well with `kea-lfc` process. Specifically, this is necessary for `kea-lfc` which is spawned by `kea` process to clean up expired leases. Since `kea-lfc` creates additional backup lease files, it needs write access to the lease file directory. Additionally, change the extension of the lease file from `.leases` to `.csv` to reflect the actual file format.
2023-12-28container: T5867: disable healthchecks due to upstream issueChristian Breunig
conmon 402de34b31388b5a2e1c <error>: Unable to send container stderr message to parent Broken pipe https://github.com/containers/conmon/issues/438