summaryrefslogtreecommitdiff
path: root/src/conf_mode
AgeCommit message (Collapse)Author
2024-04-01system: T6193: invalid warning "is not a DHCP interface but uses DHCP ↵Christian Breunig
name-server option" This fixes an invalid warning when using a DHCP VLAN interface to retrieve the system nameserver to be used. VLAN CLI config is not properly expanded leading to a false warning: [ system name-server eth1.10 ] WARNING: "eth1.10" is not a DHCP interface but uses DHCP name-server option! (cherry picked from commit 61e70c5500ad5b0a9d25bdee28d982644bad6461)
2024-03-14Merge pull request #3121 from natali-rs1985/T2998-equuleusDaniil Baturin
snmp: T2998: SNMP v3 oid "exclude" option fix
2024-03-14Merge pull request #3111 from nicolas-fort/T6110Daniil Baturin
T6110: dhcp: add error check when fail-over is enabled on a subnet, but range is not defined.
2024-03-14snmp: T2998: updated snmp.pyNataliia Solomko
2024-03-13vrrp: T5504: Keepalived VRRP ability to set more than one peer-addressNataliia Solomko
2024-03-12T6110: dhcp: add error check when fail-over is enabled on a subnet, but ↵Nicolas Fort
range is not defined.
2024-03-11snmp: T2998: SNMP v3 oid "exclude" option fixNataliia Solomko
2024-02-01bfd: T5967: add minimum-ttl optionChristian Breunig
* set protocols bfd peer <x.x.x.x> minimum-ttl <1-254> (partially cherry-picked from 1f07dcbddfcfdbb9079936ec479c5633934dd547)
2024-01-09console: T4646: Fixed USB console issueszsdc
* fixed the `systemctl restart` command that used a value from config instead converted to `ttyUSBX` * moved systemd units from `/etc/` to `/run/` (cherry picked from commit ad1236e8d72ff29e0e2215df175b6f032fba75eb)
2024-01-09T1297: vrrp: backport VRRP GARP options to EquuleusNicolas Fort
2023-12-09Merge pull request #2540 from aapostoliuk/T5413-equuleusDaniil Baturin
wireguard: T5413: Blocked adding the peer with the router's public key
2023-12-04https: T5772: return from verify if NoneJohn Estabrook
​ Signed-off-by: Daniil Baturin <daniil@baturin.org>
2023-12-04https: T5772: require that at least one valid API key is presentDaniil Baturin
2023-12-04Revert "https api: T5772: check if keys are configured"Daniil Baturin
This reverts commit 57ba2fa91573ad2ecd03f0c2eb89507dfc397f1e.
2023-11-30https: T5772: remove the default API keyDaniil Baturin
The new verification code prevents it from being used, but it's not a reason to keep it
2023-11-28Merge pull request #2536 from c-po/backport-pr-2527Christian Breunig
pppoe: T5630: make MRU default to MTU if unspecified (backport #2527)
2023-11-24wireguard: T5413: Blocked adding the peer with the router's public keyaapostoliuk
Disabled adding the peer with the same public key as the router has. Backport from current https://github.com/vyos/vyos-1x/pull/2122
2023-11-23pppoe: T5630: make MRU default to MTU if unspecifiedChristian Breunig
This fixes the implementation in e062a8c11 ("pppoe: T5630: allow to specify MRU in addition to already configurable MTU") and restores the bahavior that MRU defaults to MTU if MRU is not explicitly set. This was the behavior in VyOS 1.3.3 and below before we added ability to define the MRU value. (cherry picked from commit ffd7339e2ea3eafdd97ac0763ca4a3913fe71bf3)
2023-11-23https api: T5772: check if keys are configuredDaniil Baturin
unless PAM auth is enabled for GraphQL (cherry picked from commit 8c450ea7f538beb0b2cd21d35c05d18db49a1802)
2023-11-20PAM: T5577: Optimized RADIUS PAM configzsdc
- Added system `radius` group - Added `mandatory` and `optional` modes for RADIUS - Improved PAM config for RADIUS New modes: - `mandatory` - if RADIUS answered with `Access-Reject`, authentication must be stopped and access denied immediately. - `optional` (default) - if RADIUS answers with `Access-Reject`, authentication continues using the next module. In `mandatory` mode authentication will be stopped only if RADIUS clearly answered that access should be denied (no user in RADIUS database, wrong password, etc.). If RADIUS is not available or other errors happen, it will be skipped and authentication will continue with the next module, like in `optional` mode.
2023-10-31Merge pull request #2310 from sever-sever/T5586-eqDaniil Baturin
T5586: Disable by default SNMP for Keeplived VRRP service
2023-10-19vxlan: T5669: unable to change port numberChristian Breunig
set interfaces vxlan vxlan23 address '100.64.10.2/24' set interfaces vxlan vxlan23 remote '192.0.2.1' set interfaces vxlan vxlan23 source-address '192.0.2.5' set interfaces vxlan vxlan23 vni '23' commit set interfaces vxlan vxlan23 port '4789' commit vyos@r1# ip -d link show dev vxlan23 12: vxlan23: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1450 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000 link/ether 22:6e:6d:33:c5:6b brd ff:ff:ff:ff:ff:ff promiscuity 0 minmtu 68 maxmtu 65535 vxlan id 23 remote 192.0.2.1 local 192.0.2.5 srcport 0 0 dstport 8472 Port remains at the default value of 8472 This has been fixed
2023-10-08pppoe: T5630: verify MRU is less or equal then MTUChristian Breunig
(cherry picked from commit e357258e645cf85de0035d4ecfbf99db4dd90f7e)
2023-09-26T5586: Disable by default SNMP for Keeplived VRRP serviceViacheslav Hletenko
AgentX does not work stable. From time to time we see the system service crashing/degrading if something is wrong with SNMP from util net-snmp. We should disable it by default and enable it only if configured. set high-availability vrrp snmp
2023-09-04T5533: Fix VRRP IPv6 FAULT state due to IPv6 tentative stateViacheslav Hletenko
Checks if an IPv6 address on a specific network interface is in the tentative state. IPv6 tentative addresses are not fully configured and are undergoing Duplicate Address Detection (DAD) to ensure they are unique on the network. inet6 2001:db8::3/125 scope global tentative It tentative state the group enters in FAULT state. Fix it.
2023-08-28T5428: fix DHCP address renewal/release when running in VRFChristian Breunig
2023-09-01vrf: T5428: stop DHCP processes on VRF removalChristian Breunig
This is a workaround for the priority inversion from T5492 ("CLI node priority is not inversed on node deletion"). As this is a corner case bug that's only triggered if an interface is removed from a VRF and also the VRF is removed in one commit, priorities are not honored. Thus we implement this workaround which stop the DHCP(v6) client processes on the VRF associated interfaces to get out the DHCP RELEASE message before interfaces are shut down. (cherry picked from commit 005151f77be5cf999689cfd03620bbc39df59018)
2023-08-31Merge pull request #2166 from sever-sever/T5506-eqChristian Breunig
T5506: Add link-local IPv6 address for container interfaces
2023-08-25T4825: Add interface type vethViacheslav Hletenko
Add interface type veth (Virtual ethernet) One of the usecases it's interconnect different vrf's and default vrf via bridge set interfaces virtual-ethernet veth0 peer-name 'veth1010' set interfaces virtual-ethernet veth1010 address '10.0.0.10/24' set interfaces virtual-ethernet veth1010 peer-name 'veth0' set interfaces virtual-ethernet veth1010 vrf 'foo' set interfaces bridge br0 address '10.0.0.1/24' set interfaces bridge br0 member interface veth0 vyos@r1:~$ ping 10.0.0.10 count 1 PING 10.0.0.10 (10.0.0.10) 56(84) bytes of data. 64 bytes from 10.0.0.10: icmp_seq=1 ttl=64 time=0.082 ms
2023-08-24T5506: Add link-local IPv6 address for container interfacesViacheslav Hletenko
Fix for adding IPv6 link-local address for container interfaces set container network NET01 prefix '10.0.0.0/24' set container network NET01 prefix '2001:db8:2222::/64' % ip -6 addr show scope link dev pod-NET01 17: pod-NET01: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000 inet6 fe80::d89c:dfff:fe1a:8689/64 scope link
2023-08-19wifi: T5470: improve error messageChristian Breunig
(cherry picked from commit ffb798b4678f3b1bd0a40cc42b1f0477470346dc)
2023-08-17T5223: Fix removing key id for GRE tunnelViacheslav Hletenko
Fix for removing key id from GRE tunnel Before fix: del interfaces tunnel tun10 parameters ip key commit sudo ip tunnel show tun10 tun10: gre/ip remote 203.0.113.254 local 192.168.122.11 ttl 64 tos inherit key 1234 After the fix: sudo ip tunnel show tun10 tun10: gre/ip remote 203.0.113.254 local 192.168.122.11 ttl 64 tos inherit
2023-07-31Merge pull request #2097 from aapostoliuk/T4790-equuleusChristian Breunig
login: T4790: Added check of the sum of radius timeouts
2023-07-25login: T4790: Added check of the sum of radius timeoutsaapostoliuk
Added check of the sum of login radius timeouts. It has to be less or eq 50 sec. Added check of a number of login radius servers. It has to be less or eq 8 Otherwise, log in to the device can be discarded. Backported from 1.4
2023-07-19sshguard: T5354: Add service ssh dynamic-protectionViacheslav Hletenko
Sshguard protects hosts from brute-force attacks It can inspect logs and block "bad" addresses by threshold Auto-generates own tables and rules for nftables, so they are not intercept with VyOS firewall rules. When service stops, all generated tables are deleted. set service ssh dynamic-protection set service ssh dynamic-protection allow-from '192.0.2.1' set service ssh dynamic-protection block-time '120' set service ssh dynamic-protection detect-time '1800' set service ssh dynamic-protection threshold '30'
2023-06-30bcast-relay: T5313: capitalize UDP protocol nameChristian Breunig
(cherry picked from commit a409b255acc3dc0a67058593e31b3614e20714f0)
2023-06-25bcast-relay: T5313: verify() relay interfaces have IPv4 address configuredChristian Breunig
(cherry picked from commit ca7c063666c038d104082542f04ead6062e79246)
2023-05-28router-advert: T5240: verify() that no more then 3 IPv6 name-servers configuredChristian Breunig
This is a radvd limitation. (cherry picked from commit 8ef017a3496467433c311af63116af7657c58037)
2023-05-11syslog: T2769: add VRF supportChristian Breunig
Allow syslog messages to be sent through a VRF (e.g. management). (cherry picked from commit 46d2bcdb0b500b4d1b9d973ab5b9ca3c6cf44e51)
2023-05-05container: T5082: future proof bridge network nameChristian Breunig
Users might add the podman network interface to a zone based firewall. This could cuase breaking configs on upgrades to 1.4. As container support is not yet released for 1.3 LTS version (will be 1.3.3), we once rename the network interface to match the schema in VyOS 1.4.
2023-04-13Merge pull request #1952 from sever-sever/T4727Christian Breunig
T4727: Add RADIUS rate-limit attribute for vpn pptp
2023-04-12T5152: Get default hostname for telegraf from FQDN or hostnameViacheslav Hletenko
Fix for Telegraf agent hostname isn't qualified Try to get the hostname from FQDN and then from the hostname Used for metrics You may have more than one machine with different domain names r1 domain-name foo.local, hostname myhost r2 domain-name bar.local, hostname myhost It helps to detect from which exactly host we get metrics for InfluxDB2
2023-04-11T4727: Add RADIUS rate-limit attribute for vpn pptpViacheslav Hletenko
Add rate-limit attribute, multiplier, vendor specific attribute for the [shaper] section
2023-04-01container: T4959: add registry authentication optionChristian Breunig
Container registry CLI node changed from leafNode to tagNode with the same defaults. In addition we can now configure an authentication option per registry. (cherry picked from commit fe82d86d3e87cb8d92ebc9d0652c08e3dd79a12c)
2023-04-01container: T5047: bugfix TypeError: argument of type 'NoneType' is not iterableChristian Breunig
Commit 52e51ffb ("container: T5047: restart only containers that changed") started to iterate over a NoneType which is invalid. This happened when a network description was changed but no container was due for restart. (cherry picked from commit 86d7b8d1d2b53b9fa93bd456abb4ea1b4f2949b6)
2023-03-29container: T5047: restart only containers that changedChristian Breunig
By default VyOS used to restart all containers it managed. This makes no sense as it will be service disrupting. Instead only restart the containers that had changes on the CLI beeing made. (cherry picked from commit 52e51ffbb84996aee9d5b94eebf64589ead31225)
2023-03-23T5105: Fix error message from dhcp-serverNicolas Fort
(cherry picked from commit 05e00b986a563681b038b226c86c83a29d6da820)
2023-03-15T3083: Add service event-handlerViacheslav Hletenko
Event-handler allows executing a custom script when detects some configured "pattern regex" set service event-handler event first filter pattern '.*ssh2.*' set service event-handler event first script arguments '192.0.2.5' set service event-handler event first script environment interface value 'eth0' set service event-handler event first script path '/config/scripts/hello.sh' It is the backport from 1.4
2023-03-09T5066: Fix GRE tunnel variable name for verify check keysViacheslav Hletenko
2023-03-01T4967: Allow setting container hostnameViacheslav Hletenko
Ability setting container hostname This host name is used as /etc/hostname set container name <tag> host-name 'mybox' (cherry picked from commit c68d73e6720a7df2b48df17ac7b9b4c906e0294c)
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-26 00:06:39 +0000