summaryrefslogtreecommitdiff
path: root/src/conf_mode
AgeCommit message (Collapse)Author
2023-12-11srv6: T591: initial implementation to support locator definitionChristian Breunig
VyOS CLI set protocols segment-routing srv6 locator bar prefix '2001:b::/64' set protocols segment-routing srv6 locator foo behavior-usid set protocols segment-routing srv6 locator foo prefix '2001:a::/64' Will generate in FRR segment-routing srv6 locators locator bar prefix 2001:b::/64 block-len 40 node-len 24 func-bits 16 exit ! locator foo prefix 2001:a::/64 block-len 40 node-len 24 func-bits 16 behavior usid exit ! exit ! exit ! exit
2023-12-11bgp: T591: add SRv6 support from FRRChristian Breunig
set protocols bgp sid vpn per-vrf export '99' set protocols bgp srv6 locator 'foo' set protocols bgp system-as '100' Will generate in FRR config router bgp 100 no bgp ebgp-requires-policy no bgp default ipv4-unicast no bgp network import-check ! segment-routing srv6 locator foo exit sid vpn per-vrf export 99 exit
2023-12-10T5791: DNS dynamic exclude check for dynamic interfaces PPPoEViacheslav Hletenko
Dynamic interfaces such as PPPoE/sstpc can not exist during verification dns dynamic. As they added and removed dynamically. Add interface_filter to exclude them from checks
2023-12-09Merge pull request #1960 from sarthurdev/keaChristian Breunig
dhcp: T3316: Migrate dhcp/dhcpv6 server to Kea
2023-12-08Merge pull request #2584 from c-po/T4943-google-authenticatorChristian Breunig
login: T4943: use pam-auth-update to enable/disable Google authenticator
2023-12-08T5798: load-balancing revese-proxy add multiple SSL certificatesViacheslav Hletenko
Add ability to configure multiple SSL certificates for frontend/service set load-balancing reverse-proxy service web mode http set load-balancing reverse-proxy service web port 443 set load-balancing reverse-proxy service web ssl certificate cert1 set load-balancing reverse-proxy service web ssl certificate cert2
2023-12-08login: T4943: use pam-auth-update to enable/disable Google authenticatorChristian Breunig
The initial version always enabled Google authenticator (2FA/MFA) support by hardcoding the PAM module for sshd and login. This change only enables the PAM module on demand if any use has 2FA/MFA configured. Enabling the module is done system wide via pam-auth-update by using a predefined template. Can be tested using: set system login user vyos authentication plaintext-password vyos set system login user vyos authentication otp key 'QY735IG5HDHBFHS5W7Y2A4EM274SMT3O' See https://docs.vyos.io/en/latest/configuration/system/login.html for additional details.
2023-12-08dhcp: T3316: Migrate dhcp/dhcpv6 server to Keasarthurdev
2023-12-06T160: Rebase and fixes for NAT64Viacheslav Hletenko
- Update the base (rebase) - Move include/nat64-protocol.xml.i => include/nat64/protocol.xml.i - Delete unwanted `write_json`, use `write_file` instead - Remove unnecessary deleting of default values for tagNodes T2665 - Add smoketest Example: ``` set interfaces ethernet eth0 address '192.168.122.14/24' set interfaces ethernet eth0 address '192.168.122.10/24' set interfaces ethernet eth2 address '2001:db8::1/64' set nat64 source rule 100 source prefix '64:ff9b::/96' set nat64 source rule 100 translation pool 10 address '192.168.122.10' set nat64 source rule 100 translation pool 10 port '1-65535' ```
2023-12-06nat64: T160: Implement Jool-based NAT64 translatorJoe Groocock
Signed-off-by: Joe Groocock <me@frebib.net>
2023-12-05Merge pull request #2574 from nicolas-fort/T5779Daniil Baturin
T5779: conntrack: Apply fixes to <set system conntrack timeout custom>
2023-12-05T5779: conntrack: Apply fixes to <set system conntrack timeout custom>. ↵Nicolas Fort
Remove what was not working on 1.3, migrate what was working to new syntax and extend feature for ipv6.
2023-12-04Merge pull request #2501 from aapostoliuk/T5688-currentChristian Breunig
accel-ppp: T5688: Standardized pool configuration in accel-ppp
2023-12-04accel-ppp: T5688: Standardized pool configuration in accel-pppaapostoliuk
Standardized pool configuration for all accel-ppp services. 1. Only named pools are used now. 2. Allows all services to use range in x.x.x.x/mask and x.x.x.x-x.x.x.y format 3. next-pool can be used in all services 2. Allows to use in ipoe gw-ip-address without pool configuration which allows to use Fraimed-IP-Address attribute by radius. 3. Default pool name should be explicidly configured with default-pool. 4. In ipoe netmask and range subnet can be different.
2023-11-30ddclient: T5791: Update dynamic dns configuration pathIndrajit Raychaudhuri
Modify the configuration path to be consistent with the usual dialects of VyoS configuration (wireguard, dns, firewall, etc.) This would also shorten the configuration path and have a unified treatment for RFC2136-based updates and other 'web-service' based updates. While at it, add support for per-service web-options. This would allow for probing different external URLs on a per-service basis.
2023-11-26http-api: T5782: use single config-mode script for https and http-apiJohn Estabrook
2023-11-22http-api: T5768: remove auxiliary http-api.confJohn Estabrook
2023-11-22Merge pull request #2522 from dmbaturin/require-api-keysChristian Breunig
https api: T5772: check if keys are configured unless PAM auth is enabled for GraphQL
2023-11-22pppoe: T5630: make MRU default to MTU if unspecifiedChristian Breunig
This fixes the implementation in e062a8c11 ("pppoe: T5630: allow to specify MRU in addition to already configurable MTU") and restores the bahavior that MRU defaults to MTU if MRU is not explicitly set. This was the behavior in VyOS 1.3.3 and below before we added ability to define the MRU value.
2023-11-22Merge pull request #2499 from c-po/t5753-vxlan-vnifilterChristian Breunig
vxlan: T5753: add support for VNI filtering
2023-11-22https api: T5772: check if keys are configuredDaniil Baturin
unless PAM auth is enabled for GraphQL
2023-11-21http: T5762: rename "virtual-host listen-port" -> "virtual-host port"Christian Breunig
This complements commit f5e43b136 ("http: T5762: api: make API socket backend communication the one and only default") so we have a consistent port CLI node across VyOS components.
2023-11-20http: T5762: api: make API socket backend communication the one and only defaultChristian Breunig
Why: Smoketests fail as they can not establish IPv6 connection to uvicorn backend server. https://github.com/vyos/vyos-1x/pull/2481 added a bunch of new smoketests. While debugging those failing, it was uncovered, that uvicorn only listens on IPv4 connections vyos@vyos# netstat -tulnp | grep 8080 (Not all processes could be identified, non-owned process info will not be shown, you would have to be root to see it all.) tcp 0 0 127.0.0.1:8080 0.0.0.0:* LISTEN - As the CLI already has an option to move the API communication from an IP to a UNIX domain socket, the best idea is to make this the default way of communication, as we never directly talk to the API server but rather use the NGINX reverse proxy.
2023-11-18vxlan: T5753: add support for VNI filteringChristian Breunig
In a service provider network a service provider typically supports multiple bridge domains with overlapping vlans. One bridge domain per customer. Vlans in each bridge domain are mapped to globally unique VXLAN VNI ranges assigned to each customer. Without the ability of VNI filtering, we can not provide VXLAN tunnels with multiple tenants all requiring e.g. VLAN 10. To Test: set interfaces vxlan vxlan987 parameters external set interfaces vxlan vxlan987 source-interface eth0 set interfaces vxlan vxlan987 parameters vni-filter set interfaces vxlan vxlan987 vlan-to-vni 50 vni 10050 set interfaces vxlan vxlan987 vlan-to-vni 51 vni 10051 set interfaces vxlan vxlan987 vlan-to-vni 52 vni 10052 set interfaces vxlan vxlan987 vlan-to-vni 53 vni 10053 set interfaces vxlan vxlan987 vlan-to-vni 54 vni 10054 set interfaces vxlan vxlan987 vlan-to-vni 60 vni 10060 set interfaces vxlan vxlan987 vlan-to-vni 69 vni 10069 set interfaces bridge br0 member interface vxlan987 Add new op-mode command: show bridge vni Interface VNI ----------- ----------- vxlan987 10050-10054 vxlan987 10060 vxlan987 10069
2023-11-15pim: T5733: incorporate feedback from peer reviewChristian Breunig
2023-11-13pim6: T5733: add missing FRR PIM6 related featuresChristian Breunig
2023-11-13pim: T5733: fix CLI level of global PIM commandsChristian Breunig
2023-11-13igmp: T5736: migrate "protocols igmp" to "protocols pim"Christian Breunig
IGMP and PIM are two different but related things. FRR has both combined in pimd. As we use get_config_dict() and FRR reload it is better to have both centrally stored under the same CLI node (as FRR does, too) to just "fire and forget" the commit to the daemon. "set protocols igmp interface eth1" -> "set protocols pim interface eth1 igmp"
2023-11-13pim: T5733: add missing FRR PIM related featuresChristian Breunig
Migrate CLI configuration retrival to common get_config_dict(). In addition add new functionality to VyOS that is PIM related and already available in FRR.
2023-11-12ospf: T5467: remove superfluous "import os"Christian Breunig
2023-11-10T5729: firewall: switch to valueless in order to remove unnecessary ↵Nicolas Fort
<enable|disable> commands; log and state moved to new syntax.
2023-11-10ddclient: T5708: Additional smoketests for web-optionsIndrajit Raychaudhuri
Add additional smoketests for web-options validation. Also, format error messages to optionally include protocol name.
2023-11-08Merge pull request #2459 from indrajitr/mdns-streamlineViacheslav Hletenko
mdns: T5723: Always reload systemd daemon before applying changes
2023-11-07mdns: T5723: Always reload systemd daemon before applying changesIndrajit Raychaudhuri
Additionally, templatize system service override and move it to the runtime path.
2023-11-07Merge pull request #2240 from sever-sever/T5559Christian Breunig
T5559: Add static neighbor-proxy feature
2023-11-07T5720: Fix for PPPoE-server adding new interfacesViacheslav Hletenko
If we add a new interface for PPPoe-server we MUST restart the `accel-ppp@pppoe.service` as `reload` is not implemented for accel-ppp daemon Otherwise we have listen interface in the /run/accel-pppd/pppoe.conf which does not work
2023-11-06Merge pull request #2439 from c-po/t3700-vxlan-svd-fixupChristian Breunig
vxlan: T3700: add bridge dependency call when altering member interfaces
2023-11-05vxlan: T3700: add bridge dependency call when altering member interfacesChristian Breunig
Commit 7f6624f5a6f8bd ("vxlan: T3700: support VLAN tunnel mapping of VLAN aware bridges") added support for Single VXLAN Device (SVD) containers supported by the Linux Kernel. When working with bridge VIFs it turned out that when deleting a VIF all the VXLAN tunnel mappings got deleted, too. In order to avoid this, if the bridge has a VXLAN member interface which vlan-to-vni mapping enabled, we add a dependency that we call VXLAN conf-mode script after messing arround with the bridge VIFs and re-create tunnel mappings.
2023-11-05ddclient: T5708: Migration to 3.11.1 and related improvementsIndrajit Raychaudhuri
- Migrate to ddclient 3.11.1 and enforce debian/control dependency - Add dual stack support for additional protocols - Restrict usage of `porkbun` protocol, VyOS configuration structure isn't compatible with porkbun yet - Improve and cleanup error messages
2023-11-05ddclient: T5708: Validate proper use of `web-options`Indrajit Raychaudhuri
`web-options` is only applicable when using HTTP(S) web request to obtain the IP address. Apply guard for that.
2023-11-03Merge pull request #2431 from c-po/wireguard-t5707Christian Breunig
wireguard: T5707: remove previously deconfigured peer
2023-11-02wireguard: T5707: remove previously deconfigured peerChristian Breunig
Changing the public key of a peer (updating the key material) left the old WireGuard peer in place, as the key removal command used the new key. WireGuard only supports peer removal based on the configured public-key, by deleting the entire interface this is the shortcut instead of parsing out all peers and removing them one by one. Peer reconfiguration will always come with a short downtime while the WireGuard interface is recreated.
2023-11-02Merge pull request #2416 from c-po/evpn-mh-t5698Christian Breunig
T5698 EVPN ESI Multihoming
2023-11-01T5559: Add static neighbor-proxy featureViacheslav Hletenko
Ability to set ip neigbhor proxy set protocols static neighbor-proxy arp 192.0.2.1 interface 'eth0' set protocols static neighbor-proxy arp 192.0.2.2 interface 'eth0' set protocols static neighbor-proxy nd 2001:db8::1 interface 'eth1'
2023-11-01Merge pull request #2370 from sever-sever/T1797Viacheslav Hletenko
T1797: Delete VPP from vyos-1x as it is implemented in addon
2023-10-31Merge pull request #2413 from c-po/t5668-vxlanChristian Breunig
vxlan: T5668: add CLI knob to enable ARP/ND suppression
2023-10-30vxlan: T5699: migrate "external" CLI know to "parameters external"Christian Breunig
As we have a bunch of options under "paramteres" already and "external" is clearly one of them it should be migrated under that node as well.
2023-10-30vxlan: T5668: add CLI knob to enable ARP/ND suppressionChristian Breunig
In order to minimize the flooding of ARP and ND messages in the VXLAN network, EVPN includes provisions [1] that allow participating VTEPs to suppress such messages in case they know the MAC-IP binding and can reply on behalf of the remote host. In Linux, the above is implemented in the bridge driver using a per-port option called "neigh_suppress" that was added in kernel version 4.15. [1] https://www.rfc-editor.org/rfc/rfc7432#section-10
2023-10-30bond: T5698: add support for EVPN MultihomingChristian Breunig
set interfaces bonding bond10 evpn es-df-pref '50' set interfaces bonding bond10 evpn es-id '10' set interfaces bonding bond10 evpn es-sys-mac '01:23:45:67:89:ab' set interfaces bonding bond10 member interface 'eth3' set interfaces bonding bond10 mode '802.3ad'
2023-10-25Merge pull request #2406 from nicolas-fort/T5681Christian Breunig
T5681: Firewall,Nat and Nat66: simplified and standarize interface matcher
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-03 05:53:05 +0000