| Age | Commit message (Collapse) | Author |
|---|
|
2 tunnels with the same local-address should has different keys
Check existing tunnels (source-address key) with new tunnel.
|
|
We have "set system name-server <ipv4|ipv6>" to specify a name-server IP
address we wan't to use. We also have "set system name-servers-dhcp <interface>"
which does the same, but the name-server in question is retrieved via DHCP.
Both CLI nodes are combined under "set system name-server <ipv4|ipv6|interface>"
to keep things as they are in real life - we need a name-server.
|
|
The root cause is that the ipsec-settings.py script is run _twice_:
first from "vpn ipsec options", then from the top level "vpn" node.
The case when it's not required is when:
* "vpn ipsec" configuration doesn't exist yet
* user configured it with "vpn ipsec options"
* the ipsec-settings.py script is run first time, from "vpn ipsec options"
Trying to restart charon at that stage leads to a deadlock.
|
|
Keys are not allowed with ipip and sit tunnels
(cherry picked from commit 7e84566dedfdc532ffe05b404005daa6f21df567)
|
|
nipsec: T3093: Delete temporarily generated code
|
|
This code was generated before to rewrite IPSec to XML style
And this was rewriten/fixed and used in the next 1.4 releases
So we realy don't need it in 1.3 as we use old nodes for it.
|
|
While migrating to get_config_dict() in commit e8a1c291b1 ("login: radius:
T3192: migrate to get_config_dict()") the user-name was not excluded
from mangling (no_tag_node_value_mangle=True).
This resulted in a username "vyos-user" from CLI to be actually created as
"vyos_user" on the system.
This commit also adds respective Smoketests to prevent this in the future.
(cherry picked from commit 658de9ea0fbe91e593f9cf0a8c434791282af100)
|
|
|
|
It makes no sense to have a parser for the ethtool values in ethtool.py
and ethernet.py - one instance ios more then enough!
(cherry picked from commit 0229645c8248decb5664056df8aa5cd5dff41802)
|
|
Only update the RX/TX ring-buffer settings if they are different from the ones
currently programmed to the hardware. There is no need to write the same value
to the hardware again - this could cause traffic disruption on some NICs.
(cherry picked from commit 29082959e0efc02462fba8560d6726096e8743e9)
|
|
Not all interface drivers have the ability to change the speed and duplex
settings. Known drivers with this limitation are vmxnet3, virtio_net and
xen_netfront. If this driver is detected, an error will be presented to the
user.
(cherry picked from commit cc742d48579e4f76e5d3230d87e22f71f76f9301)
|
|
Ethernet adapters have a discrete set of available speed and duplex settings.
Instead of passing every value down to ethtool and let it decide, we can do
this early in the VyOS verify() function for ethernet interfaces.
(cherry picked from commit 91892e431349ca0edb5e3e3023e4f340ab9b777f)
|
|
(cherry picked from commit 5c29377fa91595088118419275f6d05b1fbfbd1d)
|
|
As IS-IS is a new feature and the CLI configuration changed from 1.3 -> 1.4
(required by T3417) it makes sense to synchronize the CLI configuration for
both versions. This means backporting the CLI from 1.4 -> 1.3 to not confuse
the userbase already with a brand new feature.
As 1.3.0-epa1 is on the way and should not contain any CLI changes afterwards,
this is the perfect time.
|
|
(cherry picked from commit d9d923ea4e0bbe0cc154dc2fbdd626585b5d7449)
|
|
|
|
(cherry picked from commit 19b16986515dcb58955e153025b24dc012faa574)
|
|
(cherry picked from commit 655876f4c22c0f4ea839a81f4af09d6016e19197)
|
|
|
|
|
|
|
|
(cherry picked from commit d77a2f56ea7e76158c07f5829397be4555473e3d)
|
|
|
|
|
|
|
|
Re-issuing the same iproute2 commands can lead to errors, simply ignore
them and not raise a Python exception.
(cherry-picked from commit 9920f7340d60b51d32bad9dbd24a907718f72837)
|
|
(cherry-picked from commit 08614557b679c59495b3bf629f763f9a4cc0ed25)
|
|
It is easier to backport the entire vyos.ifconfig library from 1.4 instead of
backporting single pieces which are required to add new feature to the tunnel
interface section.
In addition that both libraries are now back in sync it will become much easier
to backport any other new feature introduced in VyOS 1.4!
|
|
|
|
|
|
|
|
to avoid trying to wait for a daemon that shouldn't even be running.
|
|
|
|
|
|
(cherry picked from commit eb8cd3af91bac01a3f7f99b362c8105d69bb3c55)
|
|
|
|
because of typo
change from `bind_to_all` to `bind-to-all`
refer: interface-definitions/vrf.xml.in
(cherry picked from commit 8a78c790c1239eef533c7bbe12911aaeec4dc90f)
|
|
|
|
(cherry picked from commit 6b7b19c93f90839549dd668116c4da2f38cfdc66)
VyOS 1.3 will ship OpenVPN 2.5.1 and thus it is the perfect timing to still
remove this option before introducing it in a new LTS release.
|
|
|
|
Some APNs require a username/password. Add CLI nodes (matching the PPPoE
syntax) for client authentication.
One APN would be the IPv4/IPv6 APN from Deutsche Telekom (Germany)
APN Name: Telekom Internet IPv6
APN: internet.v6.telekom
Benutzername: telekom
Passwort: tm
|
|
A validator is missing checking that if authentication is used on a PPPoE
interface, both username and password are set.
|
|
(cherry picked from commit c2a1c071e7d0a9ca754d7f5016eed7db188b3d1a)
|
|
|
|
set service dhcp-server shared-network-name NET01 authoritative
set service dhcp-server shared-network-name NET01 subnet 10.0.0.0/24 default-router '10.0.0.1'
set service dhcp-server shared-network-name NET01 subnet 10.0.0.0/24 lease '86400'
set service dhcp-server shared-network-name NET01 subnet 10.0.0.0/24 range RNG01 start '10.0.0.60'
set service dhcp-server shared-network-name NET01 subnet 10.0.0.0/24 range RNG01 stop '10.0.0.70'
set service dhcp-server shared-network-name NET01 subnet 10.0.0.0/24 range RNG02 start '10.0.0.55'
set service dhcp-server shared-network-name NET01 subnet 10.0.0.0/24 range RNG02 stop '10.0.0.65'
Will result in a dhcpd.conf:
shared-network NET01 {
authoritative;
subnet 10.0.0.0 netmask 255.255.255.0 {
option routers 10.0.0.1;
default-lease-time 86400;
max-lease-time 86400;
range 10.0.0.60 10.0.0.70;
range 10.0.0.55 10.0.0.65;
}
on commit {
set shared-networkname = "NET01";
}
}
This is not allowed by ISC DHCPd:
dhcpd[3307]: /run/dhcp-server/dhcpd.conf line 25: lease 10.0.0.63 is declared twice!
dhcpd[3307]: range 10.0.0.55 10.0.0.65;
(cherry picked from commit b0e1c8a9c9ef470297bf3c9f5059ad7c720c46ff)
|
|
|
|
|
|
(cherry picked from commit 38b3dff1ebdf8c26a28d0befa6dcf0b4f51f21be)
|
|
Commit c17f259d ("router-advert: T3561: add support for specific routes") used
tabs over spaces in the Migration script which triggered a TabError (inconsistent
use of tabs and spaces in indentation").
(cherry picked from commit acc701bac3483a3242c77a2e00c076890e27eea9)
|
|
Co-authored-by: Mark Royds <mark.royds@vitaminit.co.uk>
(cherry picked from commit c17f259d09abd2bf632d09400fe8deb4c2781d32)
|
