| Age | Commit message (Collapse) | Author |
|---|
|
system: op-mode: T3334: allow delayed getty restart when configuring serial ports
|
|
ports
* Created op-mode command "restart serial console"
* Relocated service control to vyos.utils.serial helpers, used by conf- and
op-mode serial console handling
* Checking for logged-in serial sessions that may be affected by getty reconfig
* Warning the user when changes are committed and serial sessions are active,
otherwise restart services as normal. No prompts issued during commit,
all config gen/commit steps still occur except for the service restarts
(everything remains consistent)
* To apply committed changes, user will need to run "restart serial console"
to complete the process or reboot the whole router
* Added additional flags and target filtering for generic use of helpers.
|
|
vrf: T6603: conntrack ct_iface_map must only contain one entry for iifname/oifname
|
|
Commit 452068ce78 ("interfaces: T6592: moving an interface between VRF instances
failed") added a similar but more detailed implementation of get_vrf_table_id()
that was added in commit adeac78ed of this PR. Move to the common available
implementation.
|
|
* PBR can only target table IDs up to 200 and the previous PR to extend the
range was rejected
* PBR with this PR can now also target VRFs directly by name, working around
targeting problems for VRF table IDs outside the overlapping 100-200 range
* Validation ensures rules can't target both a table ID and a VRF name
(internally they are handled the same)
* Added a simple accessor (get_vrf_table_id) for runtime mapping a VRF name
to table ID, based on vyos.ifconfig.interface._set_vrf_ct_zone().
It does not replace that usage, as it deliberately does not handle non-VRF
interface lookups (would fail with a KeyError).
* Added route table ID lookup dict, global route table and VRF table defs
to vyos.defaults. Table ID references have been updated in code touched
by this PR.
* Added a simple smoketest to validate 'set vrf' usage in PBR rules
|
|
T6362: Create conntrack logger daemon
|
|
OpenVPN CLI-option: T6571: rename ncp-ciphers with data-ciphers
|
|
(#3616)
* Change ipsec match-ipsec/none to match-ipsec-in and match-none-in for
fw rules
* Add ipsec match-ipsec-out and match-none-out
* Change all the points where the match-ipsec.xml.i include was used
before, making sure the new includes (match-ipsec-in/out.xml.i) are
used appropriately. There were a handful of spots where match-ipsec.xml.i
had snuck back in for output hooked chains already
(the common-rule-* includes)
* Add the -out generators to rendered templates
* Heavy modification to firewall config validators:
* I needed to check for ipsec-in matches no matter how deeply nested
under an output-hook chain(via jump-target) - this always generates
an error.
* Ended up retrofitting the jump-targets validator from root chains
and for named custom chains. It checks for recursive loops and improper
IPsec matches.
* Added "test_ipsec_metadata_match" and "test_cyclic_jump_validation"
smoketests
|
|
|
|
|
|
|
|
iifname/oifname
When any of the following features NAT, NAT66 or Firewall is enabled, for every
VRF on the CLI we install one rule into nftables for conntrack:
chain vrf_zones_ct_in {
type filter hook prerouting priority raw; policy accept;
counter packets 3113 bytes 32227 ct original zone set iifname map @ct_iface_map
counter packets 8550 bytes 80739 ct original zone set iifname map @ct_iface_map
counter packets 5644 bytes 67697 ct original zone set iifname map @ct_iface_map
}
This is superfluous.
|
|
|
|
vrf: T6602: verify supplied VRF name on all interface types
|
|
system_option: T5552: Apply IPv4 and IPv6 options after reapplying sysctls by TuneD
|
|
Only some (e.g. ethernet or wireguard) interfaces validate if the supplied VRF
actually exists. If this is not validated, one can pass an invalid VRF to the
system which generates an OSError exception.
To reproduce
set interfaces vxlan vxlan1 vni 1000
set interfaces vxlan vxlan1 remote 1.2.3.4
set interfaces vxlan vxlan1 vrf smoketest
results in
OSError: [Errno 255] failed to run command: ip link set dev vxlan1 master smoketest_mgmt
This commit adds the missing verify_vrf() call to the missing interface types
and an appropriate smoketest for all interfaces supporting VRF assignment.
|
|
by TuneD
|
|
T6525: Add default dir for ext-scripts without absolute path
|
|
|
|
openvpn: T3834: verify() is not allowed to change anything on the system
|
|
vrf: T6592: remove unused import get_interface_config
|
|
Commit e3c71af1466 ("remove secrets file if the tunnel is deleted and fix
opmode commands") added a code path into verify() which removed files on the
system if TOTP was not defined.
This commit moves the code path to the appropriate generate() function.
|
|
wireless: T6597: improve hostapd startup and corresponding smoketests
|
|
|
|
Remove unused import (left over) from commit 36f3791e0 ("utils: migrate to new
get_vrf_tableid() helper")
|
|
Commit 452068ce7 ("interfaces: T6592: moving an interface between VRF instances
failed") introduced a new helper to retrieve the VRF table ID from the Kernel.
This commit migrates the old code path where the individual fields got queried
to the new helper vyos.utils.network.get_vrf_tableid().
|
|
This was found during smoketesting as thoase started to repeadingly fail in the last weeks
File "/usr/libexec/vyos/tests/smoke/cli/test_interfaces_wireless.py", line 534, in test_wireless_security_station_address
self.assertTrue(process_named_running('hostapd'))
AssertionError: None is not true
Digging into this revealed that this is NOT related to the smoketest coding but
to hostapd/systemd instead. With a configured WIFI interface and calling:
"sudo systemctl reload-or-restart hostapd@wlan1" multiple times in a short
period caused systemd to report:
"Jul 18 16:15:32 systemd[1]: hostapd@wlan1.service: Deactivated successfully."
According to the internal systemd logic used in our version this is explained by:
/* If there's a stop job queued before we enter the DEAD state, we shouldn't act on Restart=, in order to not
* undo what has already been enqueued. */
if (unit_stop_pending(UNIT(s)))
allow_restart = false;
if (s->result == SERVICE_SUCCESS)
s->result = f;
if (s->result == SERVICE_SUCCESS) {
unit_log_success(UNIT(s));
end_state = SERVICE_DEAD;`
Where unit_log_success() generates the log message in question.
Improve the restart login in the wireless interface script and an upgrade to
hostapd solved the issue.
|
|
|
|
|
|
|
|
|
|
fix: attempt to fix indentation on `wpa_supplicant.conf.j2`
fix: attempt to fix indentation on `wpa_supplicant.conf.j2`
fix: incorrect bssid mapping
fix: use the correct jinja templating (I think)
fix: “remote blank space
fix: attempt to fix the formatting in j2
fix: attempt to fix the formatting in j2
feat: rename enterprise username and password + add checks in conf mode.
fix: move around `bssid` config option on `wpa_supplicant.conf.j2` and fix the security config part
fix: fix indentation on `wpa_supplicant.conf.j2`
|
|
If a firewall is not configured there is no reason to get and
execute telegraf firewall custom scripts as there are no nft
chain in the firewall nftables configuration
|
|
T6477: Add telegraf loki output plugin
|
|
Add Loki plugin to telegraf
set service monitoring telegraf loki url xxx
|
|
wireless: T6320: Add 802.11ax at 6GHz to VyOS
|
|
|
|
Authored-By: Alain Lamar <alain_lamar@yahoo.de>
|
|
Add CLI commands
Add config
Add conf_mode
Add systemd config
Add stunnel smoketests
Add log level config
|
|
T3202: Enable wireguard debug messages
|
|
Do no longer use my_set and my_delete as this prevents scripts beeing run under
supervision of vyos-configd.
|
|
|
|
|
|
T5949: Add option to disable USB autosuspend
|
|
openconnect: T6500: add support for multiple ca-certificates
|
|
|
|
Add possibility to provide a full CA chain to the openconnect server.
* Support multiple CA certificates
* For every CA certificate specified, always determine the full certificate
chain in the background and add the necessary SSL certificates
|
|
|
|
|
|
T6489: Add support for CLI config scripts that change the underlaying working configuration
|
