| Age | Commit message (Collapse) | Author |
|---|
|
|
|
|
|
When running SSH from the VyOS system the source IP address can be set by:
set system options ssh-client source-address x.x.x.x
|
|
Problem was introduced in commit 740ace13 ("router-advert: T2609: add missing
verify() for prefix lifetime"). The 'infinity' literal was not converted to its
corresponding integer 0xffffffff (4294967295) for the check.
|
|
Move sshd_config file to /run so it must be generated on every boot and is
not stored accidently.
|
|
This removes additional code paths as we can instatly work with the input dict
the same was as it was done for PPPoE. This fixes the entire DHCPv6-PD support
on non PPPoE interfaces as this was lost in translation while processing T2653.
|
|
Make the port used for RADIUS accounting user configurable. This is now
valid for the following services which are based on Accel-PPP:
* ipoe-server
* pppoe-server
* l2tp
* pptp
* sstp
|
|
|
|
|
|
Migration files on the storage should be done one time by a migration script
instead of every time the configuration changes. Moving this to an older
migration script is fine as this is around for a long time and all rolling
releases are already up2date. It only affects updates from VyOS 1.2 series.
|
|
|
|
The current VyOS CLI parser code written in Python contains a ton of duplicates
which I can also hold myself accountable for - or maybe mainly me - depends on
the angle of judge.
|
|
The current VyOS CLI parser code written in Python contains a ton of duplicates
which I can also hold myself accountable for - or maybe mainly me - depends on
the angle of judge.
|
|
The current VyOS CLI parser code written in Python contains a ton of duplicates
which I can also hold myself accountable for - or maybe mainly me - depends on
the angle of judge.
|
|
Further reduce the boiler-plate code to determine interface tag node or not.
It can be passed into get_interface_dict() if explicitly required - else it
is taken from the environment.
|
|
The current VyOS CLI parser code written in Python contains a ton of duplicates
which I can also hold myself accountable for - or maybe mainly me - depends on
the angle of judge.
|
|
The current VyOS CLI parser code written in Python contains a ton of duplicates
which I can also hold myself accountable for - or maybe mainly me - depends on
the angle of judge.
|
|
This can be used to see if a tagNode has been changed. It will return a list
of changed nodes.
|
|
The current VyOS CLI parser code written in Python contains a ton of duplicates
which I can also hold myself accountable for - or maybe mainly me - depends on
the angle of judge.
|
|
After switching from raw parsing of the interface options to get_config_dict()
this utilizes another utility function which wraps get_config_dict() and adds
other common and reused parameters (like deleted or bridge member).
Overall this drops redundant code (again) and makes the rest more maintainable
as we only utilize a single function.
|
|
The current VyOS CLI parser code written in Python contains a ton of duplicates
which I can also hold myself accountable for - or maybe mainly me - depends on
the angle of judge.
While providing a new update() method in vyos.ifconfig.interfaces() this is
extended for pdeudo-ethernet interfaces in the derived class.
|
|
The current VyOS CLI parser code written in Python contains a ton of duplicates
which I can also hold myself accountable for - or maybe mainly me - depends on
the angle of judge.
While providing a new update() method in vyos.ifconfig.interfaces() this is
extended for bridge interfaces in the derived bridge class.
Signed-off-by: Christian Poessinger <christian@poessinger.com>
|
|
The current VyOS CLI parser code written in Python contains a ton of duplicates
which I can also hold myself accountable for - or maybe mainly me - depends on
the angle of judge.
While providing a new update() method in vyos.ifconfig.interfaces() this is
extended for ethernet based interfaces which also supports 802.1q, 802.1ad
VLANs. This commit migrates the existing codebase for an ethernet based
interfaces and implements the missing parts for VLANs. Adding or migrating other
interfaces (e.g. bridge or bond) will become much easier as they must reuse
the entire functionality - we now walk towards a single codepath.
Thanks for all who made this combined effort possible!
Signed-off-by: Christian Poessinger <christian@poessinger.com>
|
|
l2tpv3, wireguard, wirelessmodem, nat all require additional Kernel modules
to be present on the system. Each and every interface implemented their own
way of loading a module - by copying code.
Use a generic function, vyos.util.check_kmod() to load any arbitrary kernel
module passed as string or list.
|
|
Fix for https://phabricator.vyos.net/T2725
T2492 / a07e22377ab83104ac925e13d1824f241f0f8d4a
introduced a change which broke the initialization of
the user dict. In case the config contained an user
without an encrypted-password set, the property would
be missing and the commit would crash with
`KeyError: 'password_encrypted'`
|
|
Rules without a translation address are also valid, they'll modify just
the port and leave the address intact.
This also used to be a valid syntax and it caused an error on upgrade.
|
|
Add additional verify() stage to check that the relaying interface actually
exists on the system.
|
|
Since it is not impossible to change MACVLAN interface mode on the fly, this fix adds a new one trigger to recreate it from scratch if the mode changed in system config
|
|
Please note that either interface or address can be configured.
system {
options {
http-client {
source-interface eth0
source-address 1.1.1.1
}
}
}
|
|
The 3rd party library used for calculating the SNMP hashes in advance only
worked for SHA and nod for MD5 as SHA was hardcoded [1]. The code has been
replaced by a class-less implementation providing only the required
functionality.
[1]: https://github.com/TheMysteriousX/SNMPv3-Hash-Generator/issues/2
|
|
|
|
As of now when adding new credentials for any SNMPv3 user we submit the
credential either plaintext or encrypted. A plaintext credential will be hashed
by SNMPd in the background and then passed back into the CLI so it's not stored
in cleartext. This feels like the wrong way in changing the CLI content with
data produced by a 3rd party daemon which implements the service.
It feels like the tail wiggles the entire dog.
This should be changed in the following way:
- After retrieving the plaintext password from CLI, use Python to hash the key
in advance
- Re-populate the encrypted key into the CLI and drop the plaintext one
- Generate service configuration and continue startup of SNMPd
This also fixes a race condition when SNMPd started up but not properly
provided the hasehd keys in the configuration resulting in a ConfigurationError.
Now as we also support binding SNMPd to a VRF this fixes a deadlock situation
on bootup as we can only bind late to the VRF and require up to 5 restarts of
the service - but the service will never start.
|
|
* src/conf_mode/system-display.py added get_first_key to dictionary call
|
|
* src/conf_mode/system-display.py conf files to /run
+ src/systemd/LCDd@.service lo
- src/systemd/lcdproc.service
+ src/systemd/lcdproc@.service lo
|
|
* src/conf_mode/system-display.py cleanup use of dictionary
* data/templates/system-display/lcdproc.conf.tmpl cleanup, removed extra DateTime
|
|
disabled"
* interface-definitions/system-display.xml.in system disply disabled
* src/conf_mode/system-display.py system display disabled
|
|
Added support for system LCDs under CLI system display
+data/templates/system-display/LCDd.conf.tmpl template for LCDd server configuration file
+data/templates/system-display/lcdproc.conf.tmpl template for lcdproc client configuration file
+interface-definitions/system-display.xml.in CLI for system display
+src/conf_mode/system-display.py processing code for system display
+src/systemd/lcdproc.service systemd service definition file for lcdproc client
CLI:
system display model (SDEC|EZIO)
system display config (enabled|disabled)
system display show host (cpu|cpu-all|cpu-hist|disk|load-hist|memory|proc|uptime)
network interface <intName> alias <alias>
units (bps|Bps|pps)
clock (big|mini|date-time)
title <name>
system display duration <s>
system display hello <string>
system display bye <string>
|
|
Linux tries to bind sshd to the VRF but it is yet not ready - for any arbitrary
reason. After restarting SSH to often (rate-limiting) it is blocked by systemd.
Using Restart/RestartSec is not enough - systemd services use start rate
limiting (enabled by default). If service is started more than StartLimitBurst
times in StartLimitIntervalSec seconds is it not permitted to start any more.
Parameters are inherited from DefaultStartLimitIntervalSec (default 10s) and
DefaultStartLimitBurst (default 5).
|
|
|
|
|
|
ids: T2659: Implement fastnetmon support
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
