summaryrefslogtreecommitdiff
path: root/src/conf_mode
AgeCommit message (Collapse)Author
2023-09-24conntrack: T5376: T5598: Fix for kernel conntrack helperssarthurdev
`nf_conntrack_helper` that auto-assigned helpers is removed from the kernel
2023-09-24ipsec: T5606: Add support for whole CA chainssarthurdev
Also includes an update to smoketest to verify
2023-09-23ddclient: T5612: Additional refactoring for scripts and smoketestsIndrajit Raychaudhuri
Additional cleanup and refactoring for ddclient scripts including the smotektests.
2023-09-23ddclient: T5612: Enable TTL support for web-service based protocolsIndrajit Raychaudhuri
Enable TTL support for web-service based protocols in addition to RFC2136 based (nsupdate) protocol. Since TTL is not supported by all protocols, and thus cannot have a configuration default, the existing XML snippet `include/dns/time-to-live.xml.i` does not have common `<defaultValue>300</defaultValue>` anymore and is instead added explicitly whenever necessary.
2023-09-23ddclient: T5612: Improve dual stack support for dyndns2 protocolIndrajit Raychaudhuri
dyndns2 protocol in ddclient honors dual stack for selective servers because of the way it is implemented in ddclient. We formalize the well known servers that support dual stack in a list and check against it when validating the configuration.
2023-09-23ddclient: T5612: Fix VRF support for ddclient serviceIndrajit Raychaudhuri
Fix VRF support interface definition and configuration mode for ddclient to actually capture the VRF name and pass it to the template.
2023-09-21T5217: Add firewall synproxyViacheslav Hletenko
Add ability to SYNPROXY connections It is useful to protect against TCP SYN flood attacks and port-scanners set firewall global-options syn-cookies 'enable' set firewall ipv4 input filter rule 10 action 'synproxy' set firewall ipv4 input filter rule 10 destination port '22' set firewall ipv4 input filter rule 10 inbound-interface interface-name 'eth1' set firewall ipv4 input filter rule 10 protocol 'tcp' set firewall ipv4 input filter rule 10 synproxy tcp mss '1460' set firewall ipv4 input filter rule 10 synproxy tcp window-scale '7'
2023-09-21frr: T5591: cleanup of daemons fileApachez
2023-09-20openvpn: T5269: add a deprecation warning for shared-secretDaniil Baturin
2023-09-19conntrack: firewall: T4502: Update conntrack check for new flowtable CLIsarthurdev
Also updates flowtable smoketest to verify conntrack enabled
2023-09-19firewall: ethernet: T4502: Add interface offload node and verify interface ↵sarthurdev
supports HW flowtable offload - Add required offload setting for interfaces + flowtable offload (hw-tc-offload) - Verification of interface support for hardware offloaded flowtables
2023-09-19firewall: T4502: Update to flowtable CLIsarthurdev
`set firewall flowtable <name> interface <ifname>` `set firewall flowtable <name> offload [software|hardware]` `set firewall [ipv4|ipv6] forward filter rule N action offload` `set firewall [ipv4|ipv6] forward filter rule N offload-target <name>`
2023-09-18frr: T5239: use vyos.base.warning()Christian Breunig
2023-09-18Merge pull request #2276 from sarthurdev/conntrackViacheslav Hletenko
conntrack: T5571: Refactor conntrack using vyos.configdep
2023-09-18conntrack: T5217: Add tcp flag matching to `system conntrack ignore`sarthurdev
- Moves MSS node out of `tcp-flags.xml.i` and into `tcp-mss.xml.i` - Update smoketest to verify TCP flag matching
2023-09-16nat: Remove deprecated kernel checksarthurdev
/usr/libexec/vyos/conf_mode/nat.py:21: DeprecationWarning: The distutils package is deprecated and slated for removal in Python 3.12. Use setuptools or check PEP 632 for potential alternatives from distutils.version import LooseVersion
2023-09-16conntrack: T5571: Refactor conntrack to be independent conf script from ↵sarthurdev
firewall, nat, nat66
2023-09-15Merge pull request #2273 from sever-sever/T5586Christian Breunig
T5586: Disable by default SNMP for Keeplived VRRP service
2023-09-15Merge pull request #2185 from sever-sever/T5261-newViacheslav Hletenko
T5261: Add AWS load-balancing tunnel handler
2023-09-15T5586: Disable by default SNMP for Keeplived VRRP serviceViacheslav Hletenko
AgentX does not work stable. From time to time we see the system service crashing/degrading if something is wrong with SNMP from util net-snmp. We should disable it by default and enable it only if configured. set high-availability vrrp snmp
2023-09-15Merge pull request #2270 from indrajitr/ddclient-config-permissionChristian Breunig
ddclient: T5585: Fix file access mode for dynamic dns configuration
2023-09-15system: T5505: T5575: support calling system-ip(v6).py from init processChristian Breunig
After commit 976f82785 ("T5575: ARP/NDP table-size isnt set properly") the system bootup process got interrupted as both system-ip.py and system-ipv6.py tried to talk to FRR which was yet not started. This has been fixed by using a conditional path to only execute when FRR service has been enabled. This is safe to do as the initial commit call will has FRR service running and the path will be executed.
2023-09-14ddclient: T5585: Fix file access mode for dynamic dns configurationIndrajit Raychaudhuri
ddclient.conf file is expected to have permission 600. We need to set the permission explicitly while creating the file.
2023-09-14Merge pull request #2253 from nicolas-fort/T5561Christian Breunig
T5561: nat: inbound|outbound interface should not be mandatory
2023-09-14Merge pull request #1637 from ordex/T3214Daniil Baturin
openvpn: T3214: fix server-ipv6 and nopool handling
2023-09-14Merge pull request #2062 from vfreex/simple-fastpath-supportViacheslav Hletenko
T4502: firewall: Add software flow offload using flowtable
2023-09-13TACACS: T5577: Added `mandatory` and `optional` modes for TACACS+zsdc
In CLI we can choose authentication logic: - `mandatory` - if TACACS+ answered with `REJECT`, authentication must be stopped and access denied immediately. - `optional` (default) - if TACACS+ answers with `REJECT`, authentication continues using the next module. In `mandatory` mode authentication will be stopped only if TACACS+ clearly answered that access should be denied (no user in TACACS+ database, wrong password, etc.). If TACACS+ is not available or other errors happen, it will be skipped and authentication will continue with the next module, like in `optional` mode.
2023-09-13RADIUS: T5577: Added `mandatory` and `optional` modes for RADIUSzsdc
In CLI we can choose authentication logic: - `mandatory` - if RADIUS answered with `Access-Reject`, authentication must be stopped and access denied immediately. - `optional` (default) - if RADIUS answers with `Access-Reject`, authentication continues using the next module. In `mandatory` mode authentication will be stopped only if RADIUS clearly answered that access should be denied (no user in RADIUS database, wrong password, etc.). If RADIUS is not available or other errors happen, it will be skipped and authentication will continue with the next module, like in `optional` mode.
2023-09-13T5561: nat: defining inbound|outbound interface should not be mandatory ↵Nicolas Fort
while configuring dNAT|sNAT rule
2023-09-11frr: T5239: fix process startup orderChristian Breunig
- Reuse existing utility functions to check if a boot is ongoing (boot_configuration_complete()) - Run system_frr.py script to configure FRR daemon before initial launch - Add safety net to always have FRR running on the system This does yet not solve the error in T5239 but it's a small step towards the solution.
2023-09-09Merge pull request #2179 from vfreex/add-mldChristian Breunig
T5518: Add basic MLD support
2023-09-09T4502: firewall: Add software flow offload using flowtableYuxiang Zhu
The following commands will enable nftables flowtable offload on interfaces eth0 eth1: ``` set firewall global-options flow-offload software interface <name> set firewall global-options flow-offload hardware interface <name> ``` Generated nftables rules: ``` table inet vyos_offload { flowtable VYOS_FLOWTABLE_software { hook ingress priority filter - 1; devices = { eth0, eth1, eth2, eth3 }; counter } chain VYOS_OFFLOAD_software { type filter hook forward priority filter - 1; policy accept; ct state { established, related } meta l4proto { tcp, udp } flow add @VYOS_FLOWTABLE_software } } ``` Use this option to count packets and bytes for each offloaded flow: ``` set system conntrack flow-accounting ``` To verify a connection is offloaded, run ``` cat /proc/net/nf_conntrack|grep OFFLOAD ``` This PR follows firewalld's implementation: https://github.com/firewalld/firewalld/blob/e748b97787d685d0ca93f58e8d4292e87d3f0da6/src/firewall/core/nftables.py#L590 A good introduction to nftables flowtable: https://thermalcircle.de/doku.php?id=blog:linux:flowtables_1_a_netfilter_nftables_fastpath
2023-09-09Merge pull request #2228 from hlhc/fix/env-replaced-by-labelChristian Breunig
container: T5563 Fix environment replaced by label
2023-09-09vxlan: T3700: support VLAN tunnel mapping of VLAN aware bridgesChristian Breunig
FRR supports a new way of configuring VLAN-to-VNI mappings for EVPN-VXLAN, when working with the Linux kernel. In this new way, the mapping of a VLAN to a VNI is configured against a container VXLAN interface which is referred to as a 'Single VXLAN device (SVD)'. Multiple VLAN to VNI mappings can be configured against the same SVD. This allows for a significant scaling of the number of VNIs since a separate VXLAN interface is no longer required for each VNI. Sample configuration of SVD with VLAN to VNI mappings is shown below. set interfaces bridge br0 member interface vxlan0 set interfaces vxlan vxlan0 external set interfaces vxlan vxlan0 source-interface 'dum0' set interfaces vxlan vxlan0 vlan-to-vni 10 vni '10010' set interfaces vxlan vxlan0 vlan-to-vni 11 vni '10011' set interfaces vxlan vxlan0 vlan-to-vni 30 vni '10030' set interfaces vxlan vxlan0 vlan-to-vni 31 vni '10031'
2023-09-09container: T5563 Fix environment replaced by labelCyrus
2023-09-08T5518: Add basic MLD supportYuxiang Zhu
Currently VyOS has `protocol igmp` option to enable IGMP querier and reports through FRR's pimd. I would like to add support for IPv6 as well since FRR's IPv6 multicast functionality has significantly improved. Enabling both MLD and IGMP on a VyOS router will allow us to turn on multicast snooping on layer-3 switches in dual-stack networks. Example commands: ``` // Enable on interface eth0 set protocols pim6 interface eth0 // Explicitly join multicast group ff18::1234 on interface eth1 set protocols pim6 interface eth1 mld join ff18::1234 // Explicitly join source-specific multicast group ff38::5678 with source address 2001:db8::1 on interface eth1 set protocols pim6 interface eth1 mld join ff38::5678 source 2001:db8::1 ```
2023-09-06Merge pull request #2199 from sarthurdev/T4309Christian Breunig
conntrack: T4309: T4903: Refactor `system conntrack ignore`, add IPv6 support and firewall groups
2023-09-05Merge pull request #2204 from sever-sever/T5480John Estabrook
T5480: Ability to disable SNMP for keepalived service VRRP
2023-09-05T5533: Fix for vrrp dict key if virtual-server is usedViacheslav Hletenko
When using `virtual-server` alongside Keepalived, there can be situations where the `vrrp` key is completely unused.
2023-09-05Merge branch 'netns' into currentChristian Breunig
* netns: smoketest: T5241: re-work netns assertions and provide common utility helper netns: T5241: simplify network namespace handling netns: T5241: improve get_interface_namespace() robustness netns: T5241: use common interface_exists() helper netns: T5241: provide is_netns_interface utility helper T5241: Support netns for veth and dummy interfaces
2023-09-05netns: T5241: simplify network namespace handlingChristian Breunig
2023-09-05T5480: Ability to disable SNMP for keepalived service VRRPViacheslav Hletenko
By default we enable `--snmp` for keepalived unit service Add ability to disable it set high-availability vrrp disable-snmp
2023-09-05Merge pull request #2184 from sever-sever/T2958Christian Breunig
T2958: Refactor DHCP-server systemd unit and lease
2023-09-04T2958: Refactor DHCP-server systemd unit and leaseViacheslav Hletenko
Render isc-dhcp-server systemd unit from configuration
2023-09-04nat: T1877: Fix typo in nat ConfigErrorsarthurdev
2023-09-04conntrack: T4309: T4903: Refactor `system conntrack ignore` rule generation, ↵sarthurdev
add IPv6 support and firewall groups
2023-09-04Merge pull request #2192 from sever-sever/T5533vyos/1.5dev0zdc
T5533: Fix VRRP IPv6 group enters in FAULT state
2023-09-04T5533: Fix VRRP IPv6 group enters in FAULT stateViacheslav Hletenko
Checks if an IPv6 address on a specific network interface is in the tentative state. IPv6 tentative addresses are not fully configured and are undergoing Duplicate Address Detection (DAD) to ensure they are unique on the network. inet6 2001:db8::3/125 scope global tentative It tentative state the group enters in FAULT state. Fix it
2023-09-03Merge branch 'T5241-control-edition' of ↵Christian Breunig
https://github.com/sever-sever/vyos-1x into netns * 'T5241-control-edition' of https://github.com/sever-sever/vyos-1x: T5241: Support netns for veth and dummy interfaces
2023-09-03T5543: IGMP: fix source address handling in static joinsYuxiang Zhu
The following command expects to join source-specific multicast group 239.1.2.3 on interface eth0, where the source address is 192.0.2.1. set protocols igmp interface eth0 join 239.1.2.3 source 192.0.2.1 This command should generate FRR config: interface eth0 ip igmp ip igmp join 239.1.2.3 192.0.2.1 exit However, there is a bug in the Jinja template where `if ifaces[iface].gr_join[group]` is mostly evaluated as `false` because `iface` is a loop variable from another loop.
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-23 15:56:52 +0000