| Age | Commit message (Collapse) | Author |
|---|
|
Streamline configuration and operation of dns forwarding service in
following ways:
- Remove `dns_forwarding_reset.py` as its functionality is now covered
by `dns.py`
- Adjust function names in `dns.py` to disambiguate between DNS
forwarding and dynamic DNS
- Remove `dns_forwarding_restart.sh` as its functionality is inlined in
`dns-forwarding.xml`
- Templatize systemd override for `pdns-recursor.service` and move the
generated override files in /run. This ensures that the override files
are always generated afresh after boot
- Simplify the systemd override file by removing the redundant overrides
- Relocate configuration path for pdns-recursor to `/run/pdns-recursor`
and utilize the `RuntimeDirectory` default that pdns-recursor expects
- We do not need to use custom `--socket-dir` path anymore, the default
path (viz., `/run/pdns-recursor` is fine)
(cherry picked from commit 1c1fb5fb4bd7c0d205b28caf90357ad56423464f)
|
|
We have not seen the adoption of the https virtual-host CLI option.
What it did?
* Create multiple webservers each listening on a different IP/port
(but in the same VRF)
* All webservers shared one common document root
* All webservers shared the same SSL certificates
* All webservers could have had individual allow-client configurations
* API could be enabled for a particular virtual-host but was always enabled on
the default host
This configuration tried to provide a full webserver via the CLI but VyOS is a
router and the Webserver is there for an API or to serve files for a local-ui.
Changes
Remove support for virtual-hosts as it's an incomplete and thus mostly useless
"thing". Migrate all allow-client statements to one top-level allow statement.
(cherry picked from commit d0d3071e99eb65edb888c26ef2fdc9e038438887)
|
|
The "idea" of this PR is to add new CLI nodes under the pki subsystem to
activate ACME for any given certificate.
vyos@vyos# set pki certificate NAME acme
Possible completions:
+ domain-name Domain Name
email Email address to associate with certificate
listen-address Local IPv4 addresses to listen on
rsa-key-size Size of the RSA key (default: 2048)
url Remote URL (default:
https://acme-v02.api.letsencrypt.org/directory)
Users choose if the CLI based custom certificates are used
set pki certificate EXAMPLE acme certificate <base64>
or if it should be generated via ACME.
The ACME server URL defaults to LetsEncrypt but can be changed to their staging
API for testing to not get blacklisted.
set pki certificate EXAMPLE acme url https://acme-staging-v02.api.letsencrypt.org/directory
Certificate retrieval has a certbot --dry-run stage in verify() to see if it
can be generated.
After successful generation, the certificate is stored in under
/config/auth/letsencrypt. Once a certificate is referenced in the CLI (e.g. set
interfaces ethernet eth0 eapol certificate EXAMPLE) we call
vyos.config.get_config_dict() which will (if with_pki=True is set) blend in the
base64 encoded certificate into the JSON data structure normally used when
using a certificate set by the CLI.
Using this "design" does not need any change to any other code referencing the
PKI system, as the base64 encoded certificate is already there.
certbot renewal will call the PKI python script to trigger dependency updates.
(cherry picked from commit b8db1a9d7baf91b70c1b735e58710f1e2bc9fc7a)
# Conflicts:
# debian/control
|
|
Signed-off-by: Date Huang <tjjh89017@hotmail.com>
(cherry picked from commit 6d16ab081b70bc4ea837b66dfe032ec6bdb563d7)
|
|
Additionally, templatize system service override and move it to the
runtime path.
(cherry picked from commit eb906739047187c322b6ce9efe7c9479bed9a024)
|
|
By default we enable `--snmp` for keepalived unit service
Add ability to disable it
set high-availability vrrp disable-snmp
(cherry picked from commit 5ae730a52de2f284e45cd433bb0cf66c8508f2f7)
|
|
|
|
frr.service startup and shutdown is now explicitly managed by
vyos-router, so remove the systemd management directive.
|
|
Templatize systemd override for ddclient service and move the generated
override files in /run. This ensures that the override files are always
generated afresh after boot.
Additionally, simplify the systemd override file by removing the
redundant/superfluous overrides.
|
|
This is a radvd limitation.
|
|
Debian's `debian/2%2.10-12` update of the hostap packaging added a
ConditionFileNotEmpty directive for `/etc/hostapd/<...>` paths, which
doesn't match the `/run/hostapd/<...>` paths that VyOS uses. This commit
updates the override file to use the proper VyOS paths.
https://salsa.debian.org/debian/wpa/-/commit/d204ceb5a2dc33db888eb55b5fee542a1005e69c
Signed-off-by: Andrew Gunnerson <accounts+github@chiller3.com>
|
|
Commit cb872efb ("frr: T5045: lift LimitNOFILE 1024 -> 4096") added both
LimitNOFILE and LimitNOFILESoft parameters for FRR, as "systemctl cat frr.service"
showed both versions.
During daemon startup systemd complains:
Unknown key name 'LimitNOFILESoft' in section 'Service', ignoring.
So the key got removed again.
|
|
Also ExecReload is a duplicate of the base service file
|
|
|
|
Lift the amount of allowed open file descriptors for the FRR process tree.
Required if there are hundreds to thousands interfaces on a system.
|
|
|
|
When MACsec was bound to an ethernet interface and the underlaying
source-interface got changed (even description only) this terminated the
MACsec session running on top of it.
The root cause is when EAPoL was implemented in commit d59354e52a8a7f we
re-used the same systemd unit which is responsible for MACsec. That indeed lead
to the fact that wpa_supplicant was always stopped when anything happened on
the underlaying source-interface that was not related to EAPoL.
|
|
|
|
|
|
|
|
|
|
After discussion with @zsdc this was decided the better long term fix
* Removes hourly logrotate cron in favour of systemd timer override
|
|
does not terminate"
This reverts commit dda1b02932a5108ef257f59323dcfcf82582b805.
|
|
not terminate
|
|
It should be possible to send the gathered data via a VRF bound interface to
the collector. This is somehow related to T3981 but it's the opposite side of
the netflow process.
set system flow-accounting vrf <name>
|
|
|
|
Without this option systemd startup will hit a timeout and the kill keepalived
again.
|
|
|
|
|
|
The systemd unit for atop service is changed, so the log file name and
location will be always the same. It also adds the logrotate
configuration to conditionally rotate a log file.
Hardcoded values:
- maximum log file size: 10 MB
- maximum count of files: 10
These values can be easily changed within the
`/etc/logrotate.d/vyos-atop`, no additional configuration is required.
Rotation will be done hourly, if necessary, according to
`/etc/cron.hourly/vyos-logrotate-hourly`.
This change has two benefits:
- rotation strategy control can be done via logrotate, and can be
exposed to CLI now;
- the total size of all logs is now controlled more aggressively, so
the chance to get a situation when atop logs took all the space on a
drive is significantly lower. Also, if this will be necessary, rotation
may be done even each minute what reduces risks related to logs size
even more.
|
|
|
|
|
|
Custom OpenVPN options moved back to the command line from a
configuration file. This should keep full compatibility with the
`crux` branch, and allows to avoid mistakes with parsing options
that contain `--` in the middle.
The only smart part of this - handling a `push` option. Because
of internal changes in OpenVPN, previously it did not require an
argument in the double-quotes, but after version update in
`equuleus` and `sagitta` old syntax became invalid. So, all the
`push` options are processed to add quotes. The solution is still
not complete, because if a single config line contains `push` with
other options, it will not work, but it is better than nothing.
|
|
|
|
Move keepalived configuration from /etc/keepalived to /run/keepalived.
|
|
|
|
This reverts commit 95bbbb8bed92a60a320ff255c8b8656145f3c540.
|
|
This is the completion of commit 50a742b5 ("IPSec: T3643: Fix path for
swanctl.conf file") that moves the generated swanctl file from non-volatile to
a volatile (tmpfs backed) storage like we do for all out configuration files.
Thus it is ensured after a reboot or service deprecation there are no accidential
leftovers from previous configurations stored on the system.
|
|
Debian Bullseye ships an upstream version of lcdproc.service which infact will
start LCDd instead of the lcdproc client.
Divert the Debian Upstream service file and use the ones provided by vyos-1x.
|
|
The variable ConditionPathExists is now set in the upstream systemd unit file,
thus the VyOS generated unit file is located under /run/radvd/radvd.conf and
the condition won't match.
This can be solved by first clearing the upstream value for ConditionPathExists
and the set the new path.
|
|
|
|
|
|
|
|
Commit b082a6fb21 ("lcd: T2564: flatten CLI interface") by accident replaced
the template for hostapd which an LCD configuration during implementation of
T2564.
This has been corrected by restoring the content of the service configuration
from commit 8efb8ba1e (one commit earlier).
|
|
|
|
* set system lcd device <device>
* set system lcd model <modeml>
Both device and model have completion helpers for supported interfaces and LCD
displays.
|
|
|
|
T2486: DNS, vyos-hostsd fixes
|
|
|
|
|
