summaryrefslogtreecommitdiff
path: root/src/etc
AgeCommit message (Collapse)Author
2023-07-09T3355: import startup scripts from vyatta-cfg repo for vyos-routerChristian Breunig
2023-06-20T5303: Rsyslog.service is not workingcuongdt1994
warning: ~ action is deprecated, consider using the 'stop' statement instead [v8.24.0 try http://www.rsyslog.com/e/2307 ]
2023-06-12T5282: remove systemd management directive for frr.serviceJohn Estabrook
frr.service startup and shutdown is now explicitly managed by vyos-router, so remove the systemd management directive.
2023-06-04dns: T5144: Streamline ddclient systemd service overrideIndrajit Raychaudhuri
Templatize systemd override for ddclient service and move the generated override files in /run. This ensures that the override files are always generated afresh after boot. Additionally, simplify the systemd override file by removing the redundant/superfluous overrides.
2023-05-29T5234: add bash prompt identifier for given Network namespaceChristian Breunig
2023-05-29T5234: extend color prompt with VRF instance nameChristian Breunig
2023-05-28router-advert: T5240: verify() that no more then 3 IPv6 name-servers configuredChristian Breunig
This is a radvd limitation.
2023-05-21T5234: add bash prompt identifier for given VRF instanceChristian Breunig
2023-05-08syslog: T2769: add VRF supportChristian Breunig
Allow syslog messages to be sent through a VRF (e.g. management).
2023-05-08syslog: T2778: migrate to get_config_dict()Christian Breunig
2023-04-10hostapd: T5151: Override ConditionFileNotEmptyAndrew Gunnerson
Debian's `debian/2%2.10-12` update of the hostap packaging added a ConditionFileNotEmpty directive for `/etc/hostapd/<...>` paths, which doesn't match the `/run/hostapd/<...>` paths that VyOS uses. This commit updates the override file to use the proper VyOS paths. https://salsa.debian.org/debian/wpa/-/commit/d204ceb5a2dc33db888eb55b5fee542a1005e69c Signed-off-by: Andrew Gunnerson <accounts+github@chiller3.com>
2023-04-04opennhrp: T5135: Rewritten opennhrp script using vyos.ipsecaapostoliuk
Rewritten opennhrp script using vyos.ipsec library
2023-04-03T5141: Add numbers for dhclient-exit-hooks.d to enforce orderViacheslav Hletenko
Add numbers for all dhclient-exit-hooks.d to enforce script order execution Also, move '99-run-user-hooks' to '98-run-user-hooks' due to vyatta-dhclient-hook bug and exit with 'exit 1' it is described in the https://vyos.dev/T4856, so we should move this hook to the end. Rename 'vyatta-dhclient-hook' to '99-vyatta-dhclient-hook'
2023-03-29frr: T5045: remove LimitNOFILESoftChristian Breunig
Commit cb872efb ("frr: T5045: lift LimitNOFILE 1024 -> 4096") added both LimitNOFILE and LimitNOFILESoft parameters for FRR, as "systemctl cat frr.service" showed both versions. During daemon startup systemd complains: Unknown key name 'LimitNOFILESoft' in section 'Service', ignoring. So the key got removed again.
2023-03-11keepalived: T5003: remove Debian default config path from ConditionFileNotEmptyChristian Breunig
Also ExecReload is a duplicate of the base service file
2023-03-11keepalived: T5003: move to Debian upstream versionChristian Breunig
2023-03-07frr: T5045: lift LimitNOFILE 1024 -> 4096Christian Breunig
Lift the amount of allowed open file descriptors for the FRR process tree. Required if there are hundreds to thousands interfaces on a system.
2023-02-26T4997: add dhcp client user hooksbri
This commit adds a script to run user-defined hook scripts upon renewing a DHCP lease. This can be used to, for example, dynamically define a firewall address-group based on the dynamic IP address of an interface. For an example of its use (as well as the use case I had in mind while coding this), see https://vyos.dev/T2196#142394 Co-authored-by: br <git@ibeep.com>
2023-02-13debian: T5003: Fixes dynamic DNS for Bookwormsarthurdev
2023-02-12T5001: Replace links to the phabricator siteChristian Breunig
Replace links to the phabricator site from https://phabricator.vyos.net to https://vyos.dev
2023-02-04T4975: always sync() filesystem after commitChristian Breunig
2023-01-27sysctl: T4928: remove outdated conntrack_helperMartin Böh
This sysctl has been removed from kernel 6.0.X onwards but its removal was skipped when upgrading the kernel. See: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/net/netfilter?id=b118509076b39cc5e616c0680312b5caaca535fe
2023-01-17ifb: T4938: add Python implementation for input function block interfacesChristian Breunig
2022-12-23ipsec: T2816: do not explicitly call intepreter for python scriptChristian Poessinger
Our python scripts use the shebang logic to set an intepreter - we should rely on this and not use an external interpreter in front of the helper.
2022-12-11sstp: T4384: initial implementation of SSTP client CLIChristian Poessinger
vyos@vyos# show interfaces sstpc sstpc sstpc10 { authentication { password vyos user vyos } server sstp.vyos.net ssl { ca-certificate VyOS-CA } }
2022-11-15T4815: ip-up/down scripts needs the executable bitYuxiang Zhu
ip-up/down scripts added in https://github.com/vyos/vyos-1x/pull/1656 need the executable bit.
2022-11-14T4815: Fix various name server config issuesYuxiang Zhu
1. When a PPPoE session is connected, `pppd` will update `/etc/resolv.conf` regardless of `system name-server` option unless `no-peer-dns` is set. This is because `pppd` vendors scripts `/etc/ppp/ip-up.d/0000usepeerdns` and `/etc/ppp/ip-down.d/0000usepeerdns`, which updates `/etc/resolv.conf` on PPPoE connection and reverts the change on disconnection. This PR removes those scripts and adds custom scripts to update name server entries through `vyos-hostsd` instead. 2. There is a typo in `/etc/dhcp/dhclient-enter-hooks.d/04-vyos-resolvconf, which misspells variable name `new_dhcp6_name_servers` as `new_dhcpv6_name_servers`. This causes IPv6 name server entries in `vyos-hostsd` not updated when dhclient receives nameservers from DHCPv6. 3. Regular expressions in scripts under `/etc/dhcp/dhclient-enter-hooks.d` and `/etc/dhcp/dhclient-exit-hooks.d/` are not enclosed in `^$`, so those IPv4 related branches (like `BOUND`) could be mistakenly executed when an IPv6 reason (like `BOUND6`) is given.
2022-10-14T4533: Allow basic permissions to unprivileged RADIUS usersViacheslav Hletenko
Unprivileged RADIUS users cannot do simple diagnostics like ping or traceroute. Allow them such tools. Ability to execute op-mode commands for them. It is not new 'operator mode' feature but it allows RADIUS users execute op-mode commands
2022-10-13monitoring: T4746: Add exception if we do not have firewall rulesViacheslav Hletenko
Telegraf checks the firewall table 'vyos_filter' but it we don't have any firewall in the system we don't have this table by default It cause commit error for "service monitoring" Add exception if the table "vyos_filter" is not found
2022-09-26ethernet: T4689: support asymetric RFS configuration on multiple interfacesChristian Poessinger
The initial implementation from commit ac4e07f9 ("rfs: T4689: Support RFS (Receive Flow Steering)") always adjusted the global rps_sock_flow_entries configuration. So if RFS was enabled for one NIC but not the other - it did not work. According to the documentation: RFS is only available if the kconfig symbol CONFIG_RPS is enabled (on by default for SMP). The functionality remains disabled until explicitly configured. The number of entries in the global flow table is set through: /proc/sys/net/core/rps_sock_flow_entries The number of entries in the per-queue flow table are set through: /sys/class/net/<dev>/queues/rx-<n>/rps_flow_cnt Both of these need to be set before RFS is enabled for a receive queue. Values for both are rounded up to the nearest power of two. The suggested flow count depends on the expected number of active connections at any given time, which may be significantly less than the number of open connections. We have found that a value of 32768 for rps_sock_flow_entries works fairly well on a moderately loaded server. This commit sets rps_sock_flow_entries via sysctl on bootup leafing the RFS configuration to the interface level.
2022-09-13firewall: T4605: Rename filter tables to vyos_filtersarthurdev
2022-08-27Merge pull request #1500 from aapostoliuk/T1070-sagittaChristian Poessinger
opennhrp: T1070: Fixed creating IPSEC tunnel to Hub
2022-08-27telegraf: T3872: replace local get_interfaces() function with ↵Christian Poessinger
Section.interface() Commit cfde4b49 ("ifconfig: T2223: add vlan switch for Section.interfaces()") added the functionality of the local get_interfaces() function to the base class so all other parts in the system can query for interface names of a given type including or excluding their vlan sub-interfaces.
2022-08-26opennhrp: T1070: Fixed creating IPSEC tunnel to Hubaapostoliuk
Fixed creating IPSEC tunnel to Hub. Added continues of execution generator functions.
2022-08-24opennhrp: T1070: Fixed removal all SAs in scriptaapostoliuk
Fixed removal all dmvpn SAs. Changed vici terminate by child-sa name on terminate by ike-id
2022-08-19ethernet: T4538: fix wrong systemd unit used for EAPoLChristian Poessinger
When MACsec was bound to an ethernet interface and the underlaying source-interface got changed (even description only) this terminated the MACsec session running on top of it. The root cause is when EAPoL was implemented in commit d59354e52a8a7f we re-used the same systemd unit which is responsible for MACsec. That indeed lead to the fact that wpa_supplicant was always stopped when anything happened on the underlaying source-interface that was not related to EAPoL.
2022-08-02hostap: T4584: add Debian specific options to systemd unit filesChristian Poessinger
2022-07-26nhrp: T4546: Fixed gateway in route add commandaapostoliuk
Fixed incorrect key to get gateway for route add command
2022-07-25fastnetmon: T2659: PID file location is static and can't be changedChristian Poessinger
2022-07-22Merge pull request #1418 from zdc/T4546-sagittaChristian Poessinger
nhrp: T4546: Fixed route add command if MTU presented
2022-07-21fastnetmon: T2659: move configuration files to /runChristian Poessinger
2022-07-19nhrp: T4546: Fixed route add command if MTU presentedzsdc
In case if `NHRP_DESTMTU` environment variable is presented, the script uses an intermediate command to get the current route before adding a new one. Then received data is used in the `route add` command generation. This commit fixes this process, so setting MTU becomes possible.
2022-07-17login: T4536: add all accounts to frr groupChristian Poessinger
2022-07-09ip: T4517: add option to enable directed broadcast forwardingYuxiang Zhu
Directed broadcast is described in rfc1812#section-5.3.5.2 and rfc2644. By default Linux kernel doesn't forward directed broadcast packets unless both of `/proc/sys/net/ipv4/conf/all/bc_forwarding` and `/proc/sys/net/ipv4/conf/$iface/bc_forwarding` are set to 1.
2022-07-07syslog: T4500: Remove max-size from rsyslog leaving rotation to logrotatesarthurdev
After discussion with @zsdc this was decided the better long term fix * Removes hourly logrotate cron in favour of systemd timer override
2022-07-06firewall: T4500: Fix logrotate size to match rsyslog default valuesarthurdev
2022-06-11firewall: T4299: Add support for GeoIP filteringsarthurdev
2022-05-10T4405: Fix administrative distance of DHCP routesDmitri Toubelis
- Default dhclient script only uses value of `$IF_MERIC` envvar for default route recived via `router` option. - This variable has no effect on rotes received via `rfc3442-classless-static-routes` option - Considering that Vyos overrrides `ip` command originating from `dhclient` this can be easily fixed in `iptovtysh()` function by using the `$IF_METRIC` envvar directly in the dhclient hook. (cherry picked from commit 0c00e7bf8b6e68814607fde4ff0cd70ce9f4b486)
2022-04-25pppoe: T4391: bugfix IPv6 DHCP-PD not working after rebootChristian Poessinger
When VyOS is booting and an interface is brought up (PPPoE) which requires a user callback script that is executed asynchronously when the interface is up we can not use Config(). The problem is, Config() is not available when the system starts and the initial commit is still processed. We need to move to ConfigTreeQuery() which was build for this exact same purpose.
2022-04-21pppoe: T4384: replace default-route CLI option with common CLI nodes already ↵Christian Poessinger
present for DHCP VyOS 1.4 still leverages PPPd internals on the CLI. pppd supports three options for a default route, none, auto, force. * none: No default route is installed on interface up * auto: Default route is only installed if there is yet no default route * force: overwrite any default route There are several drawbacks in this design for VyOS and the users. If auto is specified, this only counted for static default routes - but what about dynamic ones? Same for force, only a static default route got replaced but dynamic ones did not got taken into account. The CLI is changed and we now re-use already existing nodes from the DHCP interface configuration: * no-default-route: On link up no default route is installed, same as the previous default-route none * default-route-distance: We can now specify the distance of this route for the routing table on the system. This defaults to 210 as we have for DHCP interfaces. All this will be migrated using a CLI migration script.
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-26 22:04:28 +0000