| Age | Commit message (Collapse) | Author |
|---|
|
Commit 30eb308149 ("T5713: Strip string after "secret" in IPSEC config") had
good intention but this will happen:
use-secret foo CLI node will become " secret xxxxxx" so the output of
strip-private invalidates the configuration.
This has been changed to an exact match of "secret" only
(cherry picked from commit 863af115df853987dd8ad25ecef3f0ea58485e83)
|
|
Make "strip-private" strip the string after "secret"
(cherry picked from commit 30eb308149f24b7f15aa3e40ced6918a8a3a04b8)
|
|
(cherry picked from commit 27605426a4ad613f45d36e7db5b1664dc3192981)
|
|
(cherry picked from commit 0869b91c0b15ddedd72b4d0e1475c52eb45994f0)
|
|
(cherry picked from commit 56d3f75de487c1dcfd075cf7b65cb16b6501d0ca)
|
|
(cherry picked from commit 3fe5482a29042c92298d3e69d90c0c38404d2fcc)
|
|
|
|
|
|
|
|
* T5195: move run, cmd, call, rc_cmd helper to vyos.utils.process
* T5195: use read_file and write_file implementation from vyos.utils.file
Changed code automatically using:
find . -type f -not -path '*/\.*' -exec sed -i 's/^from vyos.util import read_file$/from vyos.utils.file import read_file/g' {} +
find . -type f -not -path '*/\.*' -exec sed -i 's/^from vyos.util import write_file$/from vyos.utils.file import write_file/g' {} +
* T5195: move chmod* helpers to vyos.utils.permission
* T5195: use colon_separated_to_dict from vyos.utils.dict
* T5195: move is_systemd_service_* to vyos.utils.process
* T5195: fix boot issues with missing imports
* T5195: move dict_search_* helpers to vyos.utils.dict
* T5195: move network helpers to vyos.utils.network
* T5195: move commit_* helpers to vyos.utils.commit
* T5195: move user I/O helpers to vyos.utils.io
|
|
|
|
bracketize IPv6 remote address to avoid
Failed to parse: https://2001:db8::2/configure-section
|
|
Service config-sync allows synchronizing a section of
the configuration.
As PoC allow only nat, nat66 and firewall sections
Rertreive the configuration for a section from self node and
send this configuration to the section of the 'secondary' node.
This feature adds a symlink from helper 'vyos_config_sync.py'
to '/config/scripts/commit/post-hooks.d' and config that is
located in '/run/config_sync_conf.conf'
It will synchronyze the config only if the setcion
was changed.
set service config-sync secondary address 192.0.2.11
set service config-sync secondary key xxx
set service config-sync section nat
set service config-sync section nat66
set service config-sync section firewall
set service config-sync mode load
|
|
|
|
Add policy (any-available|all-available) for target checking for failover route
set protocols failover route 192.0.2.55/32 next-hop 192.168.122.1 check policy 'any-available'
set protocols failover route 192.0.2.55/32 next-hop 192.168.122.1 check target '192.168.122.1'
set protocols failover route 192.0.2.55/32 next-hop 192.168.122.1 check target '192.168.122.11'
It depends if we need that all targets must be alive on just one target.
|
|
There is only one target for checking ICMP/ARP
Extend it for checking multiple targets
set protocols failover route 192.0.2.55/32 next-hop 192.168.122.1 check target '203.0.113.1'
set protocols failover route 192.0.2.55/32 next-hop 192.168.122.1 check target '203.0.113.11'
The route will be installed only if all targets are 'alive'
|
|
If there is no route in the routing table (requires install route)
it checks routing table and returns best route None
But if we have 2 routes to the same dest ip but with different
metrics it doesn't get None (not first route install)
It cause that bast metric route cannot be installed (wrong logic)
Add func "is_route_exists" and check route/gateway/metric for
the required route
|
|
routing: T1237: Add new feature failover route
|
|
Failover route allows to install static routes to the kernel routing
table only if required target or gateway is alive
When target or gateway doesn't respond for ICMP/ARP checks this route
deleted from the routing table
Routes are marked as protocol 'failover' (rt_protos)
cat /etc/iproute2/rt_protos.d/failover.conf
111 failover
ip route add 203.0.113.1 metric 2 via 192.0.2.1 dev eth0 proto failover
$ sudo ip route show proto failover
203.0.113.1 via 192.0.2.1 dev eth0 metric 1
So we can safely flush such routes
|
|
<name> interface <ifname>`
* Include refactor to policy route to allow for deletion of mangle table instead of complex cleanup
* T4605: Rename mangle table to vyos_mangle
|
|
|
|
`fqdn` node
|
|
|
|
|
|
|
|
|
|
Domain group allows to filter addresses by domain main
Resolved addresses as elements are stored to named "nft set"
that used in the nftables rules
Also added a dynamic "resolver" systemd daemon
vyos-domain-group-resolve.service which starts python script
for the domain-group addresses resolving by timeout 300 sec
set firewall group domain-group DOMAINS address 'example.com'
set firewall group domain-group DOMAINS address 'example.org'
set firewall name FOO rule 10 action 'drop'
set firewall name FOO rule 10 source group domain-group 'DOMAINS'
set interfaces ethernet eth0 firewall local name 'FOO'
nft list table ip filter
table ip filter {
set DOMAINS {
type ipv4_addr
flags interval
elements = { 192.0.2.1, 192.0.2.85,
203.0.113.55, 203.0.113.58 }
}
chain NAME_FOO {
ip saddr @DOMAINS counter packets 0 bytes 0 drop comment "FOO-10"
counter packets 0 bytes 0 return comment "FOO default-action accept"
}
}
|
|
This reverts commit 534f677d36285863decb2cdff179687b4fd690cb.
Revert while investigating failure in vyos-configtest.
|
|
This reverts commit c4d389488970c8510200cac96a67182e9333b891.
Revert while investigating failure in vyos-configtest.
|
|
This reverts commit 2a4b45ba7fa4dabf7e592f499cfb06a7ae38cdea.
Revert while investigating failure in vyos-configtest.
|
|
|
|
|
|
|
|
|
|
|
|
Use tempfile to avoid race conditions during virtual migration.
|
|
Add URL, token and bucket hidind data when is used function
"strip-private"
|
|
|
|
After commit ae16a51506c ("configquery: T3402: use vyatta-op-cmd-wrapper to
provide environment") we can now call VyOS op-mode commands from arbitrary
Python scripts.
|
|
(cherry picked from commit eb6247e4b464c36fa7441627b221d0db39429251)
|
|
With the rewrite of vyatta_net_name to Python using ConfigTree, one
runs into the change in the syntax of the component version string when
updating 1.2 --> 1.3/1.4, since the udev rule is run before the
migration of the config file; add an explicit 'virtual' migration on
configtree error.
|
|
(on behalf of Dmitriy Eshenko)
|
|
|
|
|
|
|
|
|
|
|
|
Extend regex used by the "| strip-private" modifier to remove the WireGuard
private key portion from stdout.
|
|
|
|
|
