summaryrefslogtreecommitdiff
path: root/src/op_mode
AgeCommit message (Collapse)Author
2019-12-27FRRouting: T1514: Added commands to restart FRRouting daemonzsdc
It can be restarted the whole FRRouting (all running) daemons or only selected ones. The configuration is saving during the restart process, so after it, the active config should be the same as before. There are no checks for safety, so responsibility for the results of running command is fully on the operator.
2019-12-24flow-accounting: T1890: Fixed bugs in flow-accountingzsdc
* fixed improper `process.returncode` invokes * added check for if an in-memory table is active before using IMT for flows show * replaced `--nflog-range` to `--nflog-size` in iptables rules, as `--nflog-range` had never works. **WARNING: this change break compatibility with Debian 8!**
2019-12-22lldp: T393: first op mode command versionChristian Poessinger
2019-12-19flow-accounting: T1890: fixed scripts permissionszsdc
2019-12-18flow-accounting: T1890: flow-accounting rewritten with Python and XMLzsdc
This patch keep compatibility with old configuration and software, but now it is much easier to add a lot of other useful things Completely replaces vyatta-netflow package (except some outdated and not available via CLI parts)
2019-12-13T1873: DHCP: add current year to copyright noticeJernej Jakob
2019-12-13T1873: DHCP: fix service name in op-mode "show dhcp"Jernej Jakob
2019-12-09T1855, T1826: Restore support for reboot/poweroff in M minutes.Daniil Baturin
2019-12-06T1855, T1826: clean up the reboot/shutdown script.Daniil Baturin
2019-12-04shutdown: T1826: Modify cancel reboot msgViacheslav Hletenko
2019-11-23Merge branch 't1627-wireless' of github.com:c-po/vyos-1x into currentChristian Poessinger
* 't1627-wireless' of github.com:c-po/vyos-1x: wireless: T1627: support station mode wireless: T1627: support DHCP(v6) addresses wireless: T1627: add support for RADIUS source-address wireless: T1627: RADIUS servers must have a key specified wireless: T1627: change RADIUS CLI syntax l2tp: harmonize RADIUS wording wireless: T1627: re-order WPA key in hostapd config wireless: T1627: change priority from 318 to 400 wireless: T1627: fix generated ht_capab and vht_capab wireless: T1627: fix regex for 'ht channel-set-width' wireless: T1627: config migrator does not support camel casing wireless: T1627: initial rewrite of show-wireless.pl in Python wireless: T1627: add op-mode commands wireless: T1627: initial rewrite in XML/Python style
2019-11-23wireless: T1627: initial rewrite of show-wireless.pl in PythonChristian Poessinger
2019-11-17openvpn: fix typo in op-mode command on display rx bytesAndras Elso
2019-11-08QAT: T1788: Intel QAT implementationDmitriyEshenko
2019-10-27T1759: Merging interface.py into ifconfig.pykroy
2019-10-22T1759: Migrating interfaceskroy
2019-10-21Merge pull request #147 from jdmac87/currentChristian Poessinger
T1755: Python KeyError exceptions raised with 'show vpn ipsec sa' command under use of certain IPSEC cipher suites.
2019-10-21T1755: fixes issue with 'show vpn ipsec sa' command where lack of keysize ↵Jason McAllister
(encr-keysize) will result in KeyError - such as for CHACHA20_POLY1305
2019-10-21T1755: fixes issue with 'show vpn ipsec sa' command where lack of hash ↵Jason McAllister
(integ-alg) will result in KeyError - such as with GCM based options
2019-10-21T1756 More output for WGkroy
2019-10-03OpenVPN: T1689: Add full restart on 'reset openvpn interface <interface>'Christian Poessinger
2019-09-14[openvpn] T1662 Defined default remote port if it not set in cliDmitriyEshenko
2019-09-12openvpn: T1548: fix missing sys importChristian Poessinger
2019-09-12[l2tp] T834 fix cli reset commands for l2tp and pptp. Adding l2tp%d tunnel ↵DmitriyEshenko
naming.
2019-09-10[wireguard]: T1650 - cli option to delete default wg keyhagbard
2019-09-10[wireguard]: T1572 - Wireguard keyPair per interfacehagbard
- param key location added in op-mode script - param delkey and listkey implemented in op-mode script - param delkey implemented in op-mode script - generate and store named keys - interface implementation tu use cli option 'private-key'
2019-08-30[op-mode] T1621 rewrite misc commands to python/xml syntaxDmytro Aleksandrov
2019-08-26openvpn: T1548: add missing if statement in 'show openvpn' commandChristian Poessinger
2019-08-26openvpn: T1548: add 'show openvpn' commandChristian Poessinger
vyos@vyos:~$ show openvpn site-to-site OpenVPN status on vtun1 Client CN Remote Host Local Host TX bytes RX bytes Connected Since --------- ----------- ---------- -------- -------- --------------- None (PSK) N/A 172.18.201.10:1195 3.3 KiB 3.3 KiB N/A vyos@vyos:~$ show openvpn server OpenVPN status on vtun10 Client CN Remote Host Local Host TX bytes RX bytes Connected Since --------- ----------- ---------- -------- -------- --------------- client1 172.18.202.10:58644 172.18.201.10:1194 63.6 KiB 63.4 KiB Mon Aug 26 11:47:56 2019 client3 172.18.204.10:52641 172.18.201.10:1194 63.1 KiB 62.7 KiB Mon Aug 26 11:47:58 2019 OpenVPN status on vtun11 Client CN Remote Host Local Host TX bytes RX bytes Connected Since --------- ----------- ---------- -------- -------- --------------- client2 172.18.203.10:39472 172.18.201.10:1200 61.2 KiB 61.5 KiB Mon Aug 26 11:50:30 2019
2019-08-23[op-mode] T1607 rewrite 'reset conntrack', 'reset & show ip[v6]' to ↵Dmytro Aleksandrov
python/xml syntax
2019-08-16[op-mode] T1590 xml-style rewrite of 'show system' operationsDmytro Aleksandrov
2019-08-10[snmp] T1575 Adding additional check for lspciDmitriyEshenko
2019-07-25[accel-l2tp] - T834: l2tp implementationhagbard
- node.def deletion for show remote-access - IPSec interface checking for L2TP - IPSec x509 for l2tp - verification of outside-address to warning since it was optional in the previous config
2019-07-19T1376: improve show_dhcp and show_dhcpv6Jernej Jakob
2019-06-24 T1470: improve output of "show dhcpv6 server leases"Jernej Jakob
- change DUID to IAID_DUID - format IAID_DUID as colon-separated hex list - implement functions: pool, sort, state - add op-mode definitions for pool, sort, state - add columns: State, Type, Last communication, Pool - implement json output - implement completionHelp function
2019-05-30[dhcp] T1416: fix DHCP server status viewChristian Poessinger
2019-05-13T1378: extend version file with Git commit IDChristian Poessinger
The Git commit ID will be crucial for the future when the full VyOS build can be reproduced by the one Git commit ID, thus start recording it in the version file.
2019-03-08T1277: [dhcp-server] bugfix 'show dhcp server leases'Christian Poessinger
The script did not check if the service was actually configured or not. This caused a FileNotFoundError for unconfigured services. vyos@vyos:~$ show dhcp server leases Traceback (most recent call last): File "/usr/libexec/vyos/op_mode/show_dhcp.py", line 123, in <module> leases = get_leases(lease_file, state='active') File "/usr/libexec/vyos/op_mode/show_dhcp.py", line 60, in get_leases leases = IscDhcpLeases(lease_file).get() File "/usr/lib/python3/dist-packages/isc_dhcp_leases/iscdhcpleases.py", line 110, in get with open(self.filename) as lease_file: FileNotFoundError: [Errno 2] No such file or directory: '/config/dhcpd.leases'
2019-03-08T1277: [dhcpv6-server] bugfix 'show dhcpv6 server leases'Christian Poessinger
The script did not check if the service was actually configured or not. This caused a FileNotFoundError for unconfigured services. vyos@vyos:~$ show dhcpv6 server leases Traceback (most recent call last): File "/usr/libexec/vyos/op_mode/show_dhcpv6.py", line 77, in <module> leases = get_leases(lease_file, state='active') File "/usr/libexec/vyos/op_mode/show_dhcpv6.py", line 46, in get_leases leases = IscDhcpLeases(lease_file).get() File "/usr/lib/python3/dist-packages/isc_dhcp_leases/iscdhcpleases.py", line 110, in get with open(self.filename) as lease_file: FileNotFoundError: [Errno 2] No such file or directory: '/config/dhcpdv6.leases'
2019-02-21[IPsec] T1260: VICI-based implementation of "show vpn ipsec sa"Daniil Baturin
2019-02-21T1256: Execute "show ipsec vpn ipsec sa" returns incorrect resultsDaniel Pro
Not sure it's a normal case scenario, the one highlighted in T1256. To managed it I changed the "if" logic.
2019-02-19fixes: T1254 - generate wireguard keypair fails when executed on the isohagbard
- keypair can now be generated and used from the running iso to create wg tunnels on the fly
2019-01-12Correct the command suggestion in the "show vpn ipsec sa" scriptDaniil Baturin
in case when no active SAs are found.
2019-01-12T1175: add support for DMVPN connections to the "show vpn ipsec sa" script.Daniil Baturin
2019-01-08Merge pull request #63 from daniel-pro/T1077hagbard-01
T1077: Update show_ipsec_sa.py
2019-01-06T1159: correct handling of SAs without PFS in "show vpn ipsec sa".Daniil Baturin
2019-01-01T1119: 'show vpn ipsec sa' shows tunnel twice in 1.2.0-RC11Daniel
Removed duplicates from "connections" list.
2018-12-31T1108: warn the user and exit if there are no established IPsec SAs.Daniil Baturin
2018-12-18Update show_ipsec_sa.pyDaniel
2018-12-16Update show_ipsec_sa.pydaniel-pro
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-18 20:51:02 +0000