summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2021-10-08tunnel: T3893: harden logic when validating tunnel parametersChristian Poessinger
Different types of tunnels have different keys set in get_interface_config(). Thus it should be properly verified (by e.g. using dict_search()) that the key in question esits to not raise KeyError. (cherry picked from commit 5aadf673497b93e2d4ad304e567de1cd571f9e25)
2021-10-04T3889: Revert "dhcpv6-pd: T421: disable wide dhcpv6 client debug messages"Christian Poessinger
This reverts commit 184f25819fa43fc892b97c0044813b8aa56855b4.
2021-10-02dns: forwarding: T3882: remove deprecated code to work with PowerDNS 4.5Christian Poessinger
2021-10-01vrrp: T3877: remove debug outputChristian Poessinger
2021-09-30vrrp: T3877: backport handlers to solve "default rfc3768-compatibility" issueJohn Estabrook
Do not create rfc3768-compatibility interfaces by default because of wrong Jinja2 syntax. Backporting the entire system makes it easier in the future to additional bugfixes.
2021-09-28dhclient: T3852: Fixed dhclient processes searchzsdc
Backported commits: 13abffe43b2a5c41bb4ec4675c227f6cf1f868da 01158a8eaa574c48c726c20693479e4aa6e18ee6 This allows finding all running dhclient processes properly.
2021-09-26T3866: ignore interfaces without "address" in DNS forwarding migrationDaniil Baturin
2021-09-26op-mode: reboot/poweroff: T3857: send wall message to all usersChristian Poessinger
(cherry picked from commit 0ee26592772a14e829d9d1f8e64f9db875f31a63)
2021-09-22vrrp: keepalived: T616: bugfix for invalid os.unlink()Christian Poessinger
Commit 260f3832 ("vrrp: keepalived: T616: drop /etc/default/keepalived") dropped the old daemon configuration but there was one line of code that tried to delete the file which was no longer present. This resulted in: KeyError: 'daemon'
2021-09-21vrrp: keepalived: T616: drop /etc/default/keepalivedChristian Poessinger
This is a follow-up commit to 65398e5c8 ("vrrp: keepalived: T616: move configuration to volatile /run directory") as it makes no sense to store a static /etc/default/keepalived file marked as "Autogenerated by VyOS" that only enabled the SNMP option to keepalived. Better pass the --snmp switch via the systemd override file and drop all other references/files.
2021-09-21vrrp: keepalived: T616: move configuration to volatile /run directoryChristian Poessinger
Move keepalived configuration from /etc/keepalived to /run/keepalived. (cherry picked from commit b243795eba1b36cadd81c3149e833bdf5c5bea70)
2021-09-21vrrp: keepalived: T2720: adjust to Jinja2 trim_blocks featureChristian Poessinger
This is a successor to commit a2ac9fac16e ("vyos.template: T2720: always enable Jinja2 trim_blocks feature"). It only shifts the whitespaces / indents inside the keepalived configuration file. (cherry picked from commit c1ac0630cfe0ee65569fbe435cc006ade20fed22)
2021-09-19dhcp-server: T3672: migrate failover name optionChristian Poessinger
Commit 2985035b (dhcp-server: T3672: re-add missing "name" CLI option) unfortunately did not add the name option to the migration script. (cherry picked from commit e83a113360ba18043edcf7f70689c7042dee2b37)
2021-09-19dhcp-server: T2927: Add empty args if does not possible to determine variablesDmitriyEshenko
(cherry picked from commit 2f8b33a26e63e5b9ac4e697b9312f2238d6241f3)
2021-09-19dhcp-server: T3672: re-add missing "name" CLI optionChristian Poessinger
This option is mandatory and must be user configurable as it needs to match on both sides. (cherry picked from commit 2985035bcb2f3732e15a41e3c2ee6c6c93a6836e)
2021-09-19dhcp-server: T3672: only one failover peer is supportedChristian Poessinger
(cherry picked from commit a8ccf72c222caad8cd7aaca9bca773be39e87f5c)
2021-09-19dhcp-server: T3838: rename dns-server to name-server nodeChristian Poessinger
IPv4 DHCP uses "dns-server" to specify one or more name-servers for a given pool. In order to use the same CLI syntax this should be renamed to name-server, which is already the case for DHCPv6. (cherry picked from commit e2f9f4f4e8b2e961a58d935d09798ddb4e1e0460)
2021-09-19dhcp-server: T1968: allow multiple static-routes to be configuredChristian Poessinger
vyos@vyos# show service dhcp-server shared-network-name LAN { subnet 10.0.0.0/24 { default-router 10.0.0.1 dns-server 194.145.150.1 lease 88 range 0 { start 10.0.0.100 stop 10.0.0.200 } static-route 192.168.10.0/24 { next-hop 10.0.0.2 } static-route 192.168.20.0/24 { router 10.0.0.2 } } } (cherry picked from commit a4440bd589db645eb99f343a8163e188a700774c)
2021-09-18validator: T2417: bugfix on Python3 f'ormat stringsChristian Poessinger
Commit 3639a5610b590a ("validator: T2417: try to make the code clearer") introduced Python3 f'ormatted strings but missed the "f" keyword. (cherry picked from commit dda9f655f94968b07043887a03e3bba176eb94d5)
2021-09-14dhcpv6-pd: T421: disable wide dhcpv6 client debug messagesChristian Poessinger
(cherry picked from commit 6b48900358ce9b01eaa78e3a086e95a26064f0df)
2021-09-14openvpn: T3822: fix certificate permissionsChristian Poessinger
Commit b8bb9f586 ("T3822: set the OpenVPN key file owner to openvpn:openvpn") changed the permissions only for file present in the "fix_permissions" list. The list did not contain all required certificates - this has been fixed.
2021-09-12T3822: set the OpenVPN key file owner to openvpn:openvpnDaniil Baturin
2021-09-11Fix inconsistent capitalization in the show version outputDaniil Baturin
2021-09-11Merge pull request #1001 from erkin/equuleusDaniil Baturin
T3275: conntrack: Backport XML/Python implementation of conntrack CLI
2021-09-10frr: T1514: refactor restart script and drop duplicated codeChristian Poessinger
(cherry picked from commit d39567c977c84f1c16998947e16d397edbb015be)
2021-09-10T3275: conntrack: Backport XML/Python implementation of conntrack CLIerkin
2021-09-10ethernet: T3802: use only one implementation for get_driver_name()Christian Poessinger
Move the two implementations to get the driver name of a NIC from ethernet.py and ethtool.py to only ethtool.py.
2021-09-09openvpn: T3805: drop privileges using systemd - required for rtnetlinkChristian Poessinger
(cherry picked from commit 2647edc30f1e02840cae62fde8b44345d35ac720)
2021-09-09openvpn: T3805: use vyos.util.makedir() to create system directoriesChristian Poessinger
(cherry picked from commit 84e912ab2f583864e637c2df137f62f3d4cbeb14)
2021-09-07login: T971 allow quoting in public-keys optionsPaul Lettington
This patch allows the use of `"` in ssh public-key options which unlocks the ability to set the `from` option in a way that sshd will accept to limit what hosts a user can connect from. (cherry picked from commit 6b52387190f8213e7e02060e894c6ddd4fb7cb3d)
2021-09-06Merge pull request #999 from sever-sever/T2920-equChristian Poessinger
tunnel: T2920: Add checks tun with same source addr and keys
2021-09-06ifconfig: T3806: "ipv6 address no_default_link_local" required for MTU < 1280Christian Poessinger
This commit also extends the smoketest to verify that the exception for this error is raised. (cherry picked from commit 84a429b41175b95634ec9492e0cf3a564a47abdd)
2021-09-06tunnel: T2920: Add checks tun with same source addr and keysViacheslav
2 tunnels with the same local-address should has different keys Check existing tunnels (source-address key) with new tunnel.
2021-09-06T3803: add source-address option to the op mode ping CLI.Daniil Baturin
(cherry picked from commit e211cdbb375dba13af33d6ad6c3addab707f2870)
2021-09-06wwan: T3620: op-mode: not all commands supported by all modems - add info ↵Christian Poessinger
message (cherry picked from commit 10814c4d3360598262e991e4b20768dfcde91d75)
2021-09-05name-server: T3804: merge "system name-servers-dhcp" into "system name-server"Christian Poessinger
We have "set system name-server <ipv4|ipv6>" to specify a name-server IP address we wan't to use. We also have "set system name-servers-dhcp <interface>" which does the same, but the name-server in question is retrieved via DHCP. Both CLI nodes are combined under "set system name-server <ipv4|ipv6|interface>" to keep things as they are in real life - we need a name-server.
2021-09-04Merge pull request #992 from dmbaturin/ipsec-settings-fixJohn Estabrook
T3697: fix the deadlock in IPsec options script
2021-09-04T3697: do not try to restart charon if it's not requiredDaniil Baturin
The root cause is that the ipsec-settings.py script is run _twice_: first from "vpn ipsec options", then from the top level "vpn" node. The case when it's not required is when: * "vpn ipsec" configuration doesn't exist yet * user configured it with "vpn ipsec options" * the ipsec-settings.py script is run first time, from "vpn ipsec options" Trying to restart charon at that stage leads to a deadlock.
2021-09-04op-mode: T3619: bugfix "show interfaces X detail"Christian Poessinger
Commit 27e53fbc ("op-mode: T3619: bugfix "show interfaces" for VLANs") fixed the op-mode command for the "show interfaces" operation, but if a user was interested in all the ethernet or bridge interfaces, the command "show interfaces <type> detail" did not yield any output. The filtered_interfaces() function was further generalized to only operate on base components and call itself recusively if required. (cherry picked from commit 5e1f76d16332a917bfd99c6f2bffcd73e61d934d)
2021-09-04op-mode: T3619: bugfix "show interfaces" for VLANsChristian Poessinger
Commit 31169fa8a7 ("vyos.ifconfig: T3619: only set offloading options if supported by NIC") always instantiated an object of the Ethtool class for an ethernet object - this is right as a real ethernet interface is managed by Ethtool. Unfortunately the script used for "show interface" determindes the "base class" for an interface by its name, so eth0 -> Ethernet, eth0.10 -> Ethernet. This assumption is incorrect as a VLAN interface can not have the physical parameters changed of its underlaying interface. This can only be done for eth0. There is no need for the op-mode script to determine the implementation class for an interface at this level, as we are only interested in the state of the interface and it's IP addresses - which is a common operation valid for every interface on VyOS. (cherry picked from commit 27e53fbcd843c3aad27db9e97f9060ae6dfcc5ee)
2021-09-04op-mode: import cleanup in "show interfaces" scriptChristian Poessinger
(cherry picked from commit 5bde11aceffd3d7fca99e582b16555fc0c584410)
2021-09-02tunnel: T3788: Add check keys for ipip and sitViacheslav
Keys are not allowed with ipip and sit tunnels (cherry picked from commit 7e84566dedfdc532ffe05b404005daa6f21df567)
2021-09-02configd: T3694: always set script.argvBrandon Stepler
Several scripts imported by vyos-configd (including src/conf_mode/protocols_static.py) rely on argv for operating on VRFs. Always setting script.argv in src/services/vyos-configd ensures those scripts will operate on the default VRF when called with no arguments. Otherwise, a stale argv might cause those scripts to operate on the last modified VRF instead of the default VRF. (cherry picked from commit 3341c591ad1190f39ff3ffd475eddf5d95aef763)
2021-09-02Merge pull request #990 from sever-sever/T3093Christian Poessinger
nipsec: T3093: Delete temporarily generated code
2021-09-02nipsec: T3093: Delete temporarily generated codeViacheslav
This code was generated before to rewrite IPSec to XML style And this was rewriten/fixed and used in the next 1.4 releases So we realy don't need it in 1.3 as we use old nodes for it.
2021-09-02login: T3792: bugfix for usernames containing a hyphenChristian Poessinger
While migrating to get_config_dict() in commit e8a1c291b1 ("login: radius: T3192: migrate to get_config_dict()") the user-name was not excluded from mangling (no_tag_node_value_mangle=True). This resulted in a username "vyos-user" from CLI to be actually created as "vyos_user" on the system. This commit also adds respective Smoketests to prevent this in the future. (cherry picked from commit 658de9ea0fbe91e593f9cf0a8c434791282af100)
2021-09-02Merge pull request #989 from DmitriyEshenko/1x-equuleus-02092021-03Christian Poessinger
sstp-server: T2661: Delete CA certificate redundancy check
2021-09-02op-mode: T1376: speed up tab-completion for DHCP pool listingChristian Poessinger
Commit 9f20bee81c ("T1376: improve show_dhcp and show_dhcpv6") added the tab completion helper to list the availbale IP pools to query. This was done by calling a python script which then called cli-shell-api which resulted in a penalty by the Python interpreter startup. This can be solved by directly using the cli-shell-api wrapper available as <path> in op-mode - as also seen for DHCPv6. (cherry picked from commit b1ff7baaf3c52c8c364955632fcece2da7033b10)
2021-09-02sstp-server: T2661: Delete CA certificate redundancy checkDmitriyEshenko
2021-08-31vyos.ethtool: T3163: purify code to read and change flow-control settingsChristian Poessinger
It makes no sense to have a parser for the ethtool values in ethtool.py and ethernet.py - one instance ios more then enough! (cherry picked from commit 0229645c8248decb5664056df8aa5cd5dff41802)
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-24 12:23:28 +0000