Age | Commit message (Collapse) | Author |
|
In the OpenVPN site-to-site config we can use IPv6 peers
without IPv4 configurations but "verify()" checks also local and
remote IPv4 addresses that in this case will be empty lists
For example:
set interfaces openvpn vtun2 local-address 2001:db8::1
set interfaces openvpn vtun2 remote-address 2001:db8::2
Check in the commit (v4loAddr == v4remAddr) <= both empty lists
commit
DEBUG: [] == [] or ['2001:db8::2'] == []
So we should also check v4loAddr, v4remAddr, v6loAddr, v6remAddr
are not empty
|
|
Fixes several bugs around bonding member interface states not matching
the committed configuration, including:
- Disabled removed interfaces coming back up
- Newly added disabled interfaces not staying down
- Newly added interfaces not showing up in the bond
|
|
Refactor interfaces-bonding.py to simplify existing code and to remove
potentially bugprone sections in preparation for member add/remove
fixes for T4668.
|
|
When MACsec was bound to an ethernet interface and the underlaying
source-interface got changed (even description only) this terminated the
MACsec session running on top of it.
The root cause is when EAPoL was implemented in commit d59354e52a8a7f we
re-used the same systemd unit which is responsible for MACsec. That indeed lead
to the fact that wpa_supplicant was always stopped when anything happened on
the underlaying source-interface that was not related to EAPoL.
(cherry picked from commit f92a23ef9ab8be59681e5b7ba627e399d89bce53)
|
|
To reproduce:
set vpn openconnect authentication mode local
commit
Traceback (most recent call last):
File "/usr/libexec/vyos/conf_mode/vpn_openconnect.py", line 147, in <module>
verify(c)
File "/usr/libexec/vyos/conf_mode/vpn_openconnect.py", line 64, in verify
if not ocserv["authentication"]["local_users"] or not ocserv["authentication"]["local_users"]["username"]:
KeyError: 'local_users'
|
|
(cherry picked from commit 993961f60ead2a18912eb577b1152463d4eb8b4e)
|
|
(cherry picked from commit fa25d349aebc86e43957f37db765787fb7e431db)
|
|
(cherry picked from commit 5e919d3f91bccaf64878a94756c21766896db132)
|
|
(cherry picked from commit b2ff1407330e383a9fff688376377efc534bcfbc)
|
|
(cherry picked from commit bc70c1f502bc587627b1bd15f6803c6c09d20a66)
|
|
(cherry picked from commit 82d8494d349edd7707c3811a71ca0e9c0648204e)
|
|
|
|
bridge: bugfixes for equuleus
|
|
(cherry picked from commit a09359828e38c5b51a4579af16b5ea263a98233f)
|
|
Allows preferred lifetime for prefix advertisements to equal the
configured valid lifetime as per RFC 4861.
(cherry picked from commit f6efe3035d352970dc492450c3c9ddf710dda5fe)
|
|
(cherry picked from commit 54227591a0eb3c7aa8c896c6ec8b1826ce070ddf)
|
|
snmp: T2763: Add protocol TCP for service SNMP
|
|
equuleus: Bond and Bridge interface fixes + new smoketests
|
|
(cherry picked from commit 81e0f4a8dece85da7169ba05448e870206aaf57b)
|
|
It makes no sense to enslave an interface to a bond or a bridge device if it is
bound to a given VRF. If VRFs should be used - the encapuslating/master
interface should be part of the VRF.
Error out if the member interface is part of a VRF.
(cherry picked from commit 87d2dff241d9ab4de9f3a2c7fbf9852934557aef)
|
|
VRF names: "add, all, broadcast, default, delete, dev, get, inet,
mtu, link, type, vrf" are reserved and cannot be used for vrf name
(cherry picked from commit 52342f389af2da2995b858d026e6fbcad5c8bfaa)
|
|
When is_member() is inspecting the bridge/Bond member interfaces it must work
with the real interface (e.g. eth1) under the "ethernet" node and not work on
the "member interface eth1" CLI tree, that makes no sense at all.
(cherry picked from commit 3915791216998a18bf6831450df68ee199e2e4f8)
|
|
Ability to listen TCP port for service SNMP
set service snmp protocol tcp
|
|
VRF names: "add, all, broadcast, default, delete, dev, get, inet,
mtu, link, type, vrf" are reserved and cannot be used for vrf name
(cherry picked from commit 52342f389af2da2995b858d026e6fbcad5c8bfaa)
|
|
accel-ppp: T4373: T4507: Add options multiplier for shaper
|
|
ntp: T4456: support listening on specified interface (equuleus)
|
|
dns: T4509: Add dns64-prefix option (equuleus)
|
|
(cherry picked from commit ee603b3a0f9f3add72c1e5ac2277c013d40cf5a4)
|
|
rfc6147: DNS Extensions for Network Address Translation
from IPv6 Clients to IPv4 Servers
set service dns forwarding dns64-prefix 2001:db8:aabb::/96
(cherry picked from commit 2bdf4798570222b57af2de2f0b443529abdc3feb)
|
|
Add rate-limit options: attribute, muptiplier and vendor
set service ipoe-server auth radius rate-limit attribute 'Mikrotik-Rate-Limit'
set service ipoe-server auth radius rate-limit enable
set service ipoe-server auth radius rate-limit multiplier '0.001'
set service ipoe-server auth radius rate-limit vendor 'Miktorik'
|
|
hosts: T2683: Allow multiple entries for static-host-mapping (equuleus)
|
|
T4313: handle exceptions in the "generate public-key-command" script
|
|
This fixes `hostfile-update` in the dhcp-server
(cherry picked from commit 39d6ca61c50f70171b2f7bcccbba2c70d102cb7f)
|
|
(cherry picked from commit b1db3de80b8b5f4e2dcbc6d687d342986345c4b2)
|
|
It makes no sense to test against a VRF that might not exist at all.
(cherry picked from commit 171b224c1cf1303a608725ec74b545902daa243e)
|
|
When clients only use DHCP for interface addressing we can not bind NTPd to
an address - as it will fail if the address changes. This commit adds support
to bind ntpd to a given interface in addition to a given address.
set system ntp interface <name>
(cherry picked from commit 6732df1edd632b56d3d02970939f51d05d4262e9)
|
|
op-mode: T1375: Allow to clear dhcp-server lease
|
|
(cherry picked from commit c37829f1e902b84a5bc3bc5618ee97ae1ba0dd86)
|
|
Allow to reset dhcp-leases per ip
Parse file '/config/dhcpd.leases' find match section 'lease x.x.x.x {}'
And remove this section
clear dhcp-server lease 192.0.2.21
(cherry picked from commit a83eecfeee1f925c914a46623dd35f96b48389f8)
|
|
http-api: T4459: Fix to set VRF in http(s) service
|
|
ipoe: T2580: Add pools and gateway options
|
|
The http service doesn't use VRF info in conf mode.
Even if users set any VRF, the info isn't propagated to the process.
This commit set VRF parameter in http service.
|
|
Add action 'reset' (op-mode) for HTTP-API
http://localhost/reset
curl --unix-socket /run/api.sock -X POST -Fkey=mykey \
-Fdata='{"op": "reset", "path": ["ip", "bgp", "192.0.2.14"]}' \
http://localhost/reset
|
|
|
|
Add new feature to allow to use named pools
Can be used also with Radius attribute 'Framed-Pool'
set service ipoe-server client-ip-pool name POOL1 gateway-address '192.0.2.1'
set service ipoe-server client-ip-pool name POOL1 subnet '192.0.2.0/24'
|
|
monitoring: T4315: Add telegraf output plugin prometheus-client
|
|
(cherry picked from commit 0ef775ab6563af8c20d72d3e30751d50946ab704)
|
|
Add output Plugin "prometheus-client" for telegraf
set service monitoring telegraf prometheus-client xxx
|
|
- Default dhclient script only uses value of `$IF_MERIC` envvar for default route recived via `router` option.
- This variable has no effect on rotes received via `rfc3442-classless-static-routes` option
- Considering that Vyos overrrides `ip` command originating from `dhclient` this can be easily fixed in `iptovtysh()` function by using the `$IF_METRIC` envvar directly in the dhclient hook.
|
|
T4363: salt-minion: default mine_interval option is not set
|