| Age | Commit message (Collapse) | Author |
|---|
|
In cases with multiple named IP pools, it is required the option 'next'
to be sure that if IP addresses ended in one pool, then they would
begin to be allocated from the next named pool.
For accel-ppp it requires specific order as pool must be defined
before we can use it with the 'next-option'
set service ipoe-server client-ip-pool name first-pool subnet '192.0.2.0/25'
set service ipoe-server client-ip-pool name first-pool next-pool 'second-pool'
set service ipoe-server client-ip-pool name second-pool subnet '203.0.113.0/25'
[ip-pool]
203.0.113.0/25,name=second-pool
192.0.2.0/25,name=first-pool,next=second-pool
|
|
We drop default values 'port' but don't set it again per server
Fix it
|
|
T5091: IPoE-server verify RADIUS settings
|
|
As we don't have global option 'gateway-address' for ipoe-server
we cannot use general configverify.verify_accel_ppp_base_service
Add verify radius setting for configuration mode 'radius'
Radius authentication required at least one RADIUS server
|
|
Add sFlow feature based on hsflowd
According to user reviews, it works more stable and more productive
than pmacct
I haven't deleted 'pmacct' 'system flow-accounting sflow' yet
It could be migrated or deprecated later
set system sflow agent-address '192.0.2.14'
set system sflow interface 'eth0'
set system sflow interface 'eth1'
set system sflow polling '30'
set system sflow sampling-rate '100'
set system sflow server 192.0.2.1 port '6343'
set system sflow server 192.0.2.11 port '6343'
|
|
Add template to generate zebra
"ipv6 protocol ospf6 route-map xxx"
|
|
Also ExecReload is a duplicate of the base service file
|
|
|
|
Container registry CLI node changed from leafNode to tagNode with the same
defaults. In addition we can now configure an authentication option per
registry.
|
|
graphql: T5068: generate client operations for code generation tools
|
|
With long lease time for example lease '4294967295' seconds
it is impossible to get end lease as value is 'ends never;'
It cause error to get timestamp() from 'ends never' and remaining
time 'lease.end - datetime.utcnow()'
Set default remaining and end lease to '-' if we cannot get this
info
|
|
|
|
This will check if mirror/redirect is present on a QoS interface and use `vyos.configdep` module to update the interface again after QoS is applied.
|
|
IPoE-server 'interface ethX vlan xxx' (aka vlan-mon) must not be
used with 'interface ethX client-subnet'
So instead of shared pool accel-ppp uses the same pool for each
dynamically added VLAN
eth1 client-subnet '192.0.2.0/24'
eth1 vlan '2000-2021'
It cause this issue:
eth1.2000 range 192.0.2.0/24 (the first client gets address from 192.0.2.2)
eth2.2001 range 192.0.2.0/24 (the first client gets address from 192.0.2.2)
Only named pools with vlan option must be used.
|
|
|
|
|
|
Lift the amount of allowed open file descriptors for the FRR process tree.
Required if there are hundreds to thousands interfaces on a system.
|
|
|
|
|
|
graphql: T5040: generate schema on installation, rather than dynamically
|
|
|
|
ipsec: T4916: Fixed migrations script
|
|
* removed unused `re` from imports
* replaced `return_value()` to `return_values()` for `remote-address`
because this is a multi-value configuration node
|
|
|
|
|
|
Schema had been dynamically generated, based on configuration setting
for authentication. Add nullable field 'key' for static generation of
schema regardless of key/token use.
|
|
T5037: Firewall: Add queue action and options to firewall
|
|
Ability setting container hostname
This host name is used as /etc/hostname
set container name <tag> host-name 'mybox'
|
|
|
|
T4977: Add Babel routing protocol support
|
|
container: T4014: Add `command`, `arg` and `entrypoint` configuration options for containers
|
|
T5033: Ability to generate muliple keys from a file or link
|
|
|
|
Renamed local function to be identical to 1.3 ver
Changed error messages after commit to be identical to 1.3 ver
|
|
T4790: Added check of the sum of radius timeouts
|
|
We generate only one public key (string) from a file xxx.pub
op-mode with 'generate public-key-command user vyos lik_to_key_file'
Add ability to generate configuration (from op-mode) for multiple keys
As github keys don't use identifiers, generate uuid4 id for them
|
|
|
|
This commit adds a script to run user-defined hook scripts upon renewing
a DHCP lease. This can be used to, for example, dynamically define a
firewall address-group based on the dynamic IP address of an interface.
For an example of its use (as well as the use case I had in mind while
coding this), see https://vyos.dev/T2196#142394
Co-authored-by: br <git@ibeep.com>
|
|
Tunnel interface multicast settings can be "enabled or disabled". As we prefer
valueless nodes, and the linux kernel default is "disabled" we should add a
set interfaces tunnel tunXX enable-multicast
command
|
|
DeprecationWarning: 'crypt' is deprecated and slated for removal in Python 3.13
DeprecationWarning: 'spwd' is deprecated and slated for removal in Python 3.13
|
|
|
|
|
|
ipsec: T4985: Changed 'reset vpn ipsec-peer' to use vici library
|
|
1. Changed reset IPSEC, IKE SAs to use vici library.
2. Created package vyos.ipsec to communicate with vici library.
|
|
T5013: Extend accelppp op-mode script to get statistic
|
|
Fix timezones completion help and validotor
Use 'timedatectl' insted of find zoneinfo
|
|
|
|
ipsec: T4593: Remove references to deleted variables
|
|
|
|
T5020: Extend openvpn op-mode to get list of configured clients
|
