Age | Commit message (Collapse) | Author |
|
(cherry picked from commit 56d3f75de487c1dcfd075cf7b65cb16b6501d0ca)
|
|
T5561: nat: inbound|outbound interface should not be mandatory (backport #2253)
|
|
ddclient: T5585: Fix file access mode for dynamic dns configuration (backport #2270)
|
|
T5575: ARP/NDP table-size isnt set properly (backport #2255)
|
|
AgentX does not work stable. From time to time we see the system
service crashing/degrading if something is wrong with SNMP from
util net-snmp.
We should disable it by default and enable it only if configured.
set high-availability vrrp snmp
(cherry picked from commit 47875457cd8b176f7f23a3141175d745aeb14d8a)
|
|
After commit 976f82785 ("T5575: ARP/NDP table-size isnt set properly") the
system bootup process got interrupted as both system-ip.py and system-ipv6.py
tried to talk to FRR which was yet not started.
This has been fixed by using a conditional path to only execute when FRR service
has been enabled. This is safe to do as the initial commit call will has FRR
service running and the path will be executed.
(cherry picked from commit 22d5cd42f082fb11060edc51128f0b246198d2c1)
|
|
ddclient.conf file is expected to have permission 600. We need to set
the permission explicitly while creating the file.
(cherry picked from commit 7a66413d6010485dd913832f54167bce38c12250)
|
|
while configuring dNAT|sNAT rule
(cherry picked from commit ec5437913e489f40fea6bab89a6bb5f565cd1ab7)
|
|
frr: T5239: fix process startup order (backport #2245)
|
|
(cherry picked from commit 976f827859102a4e453b38bc6d2a628c66c9b582)
|
|
(cherry picked from commit 9391fc273ce95ff92a6b40b2dee4a688d3048f9f)
|
|
T5480: Ability to disable SNMP for keepalived service VRRP
|
|
- Reuse existing utility functions to check if a boot is ongoing
(boot_configuration_complete())
- Run system_frr.py script to configure FRR daemon before initial launch
- Add safety net to always have FRR running on the system
This does yet not solve the error in T5239 but it's a small step towards
the solution.
(cherry picked from commit df74a09b80df0c2ec769a10ef4f7bac01f50eb2d)
|
|
The `rule` key could be not exists in the entry of the dictionary
for examppe `{'default_action': 'drop'}`
Fix it
(cherry picked from commit 9daac1632df96b6d2089244e3c7a7b42ae682eb9)
|
|
(cherry picked from commit af398c51f7d06cdf582b347a35b1e5c867aaea58)
|
|
T5533: Fix for vrrp dict key if virtual-server is used
|
|
(cherry picked from commit 79a46675b031a4edc0ea925a45066077c0804b9b)
|
|
FRR supports a new way of configuring VLAN-to-VNI mappings for EVPN-VXLAN, when
working with the Linux kernel. In this new way, the mapping of a VLAN to a VNI
is configured against a container VXLAN interface which is referred to as a
'Single VXLAN device (SVD)'.
Multiple VLAN to VNI mappings can be configured against the same SVD. This
allows for a significant scaling of the number of VNIs since a separate VXLAN
interface is no longer required for each VNI.
Sample configuration of SVD with VLAN to VNI mappings is shown below.
set interfaces bridge br0 member interface vxlan0
set interfaces vxlan vxlan0 external
set interfaces vxlan vxlan0 source-interface 'dum0'
set interfaces vxlan vxlan0 vlan-to-vni 10 vni '10010'
set interfaces vxlan vxlan0 vlan-to-vni 11 vni '10011'
set interfaces vxlan vxlan0 vlan-to-vni 30 vni '10030'
set interfaces vxlan vxlan0 vlan-to-vni 31 vni '10031'
(cherry picked from commit 7f6624f5a6f8bd1749b54103ea5ec9f010adf778)
|
|
T5489: Add sysctl TCP congestion control by default to BBR
|
|
T5423: Fix for op-mode show vpn ike secrets
|
|
Disable sudo for PAM RADIUS template that slows down the CLI commands
To fix it add:
session [default=ignore success=2] pam_succeed_if.so service = sudo
(cherry picked from commit 01b30eb6d83cdb2ae43b956d29ac7ac1d4445776)
|
|
We don't use ipsec.secrets anymore
Fix op-mode for "show vpn ike secrets".
Ability to get "RAW" format
(cherry picked from commit 97326920e2907bdb545853887dc54c6a02b76f28)
|
|
Add by default sysctl TCP congestion control to BBR.
Default value `cubic` is not optimal.
net.core.default_qdisc=fq
net.ipv4.tcp_congestion_control=bbr
(cherry picked from commit b99ed37dd1cff3310437ff8ccf1a27cd20714c41)
|
|
save-config: T5551: check if None before write, as is the case at boot
|
|
|
|
When using `virtual-server` alongside Keepalived, there can be
situations where the `vrrp` key is completely unused.
(cherry picked from commit 5f2926cf04e8a569bb25cd4121179d12b9e04c6c)
|
|
By default we enable `--snmp` for keepalived unit service
Add ability to disable it
set high-availability vrrp disable-snmp
(cherry picked from commit 5ae730a52de2f284e45cd433bb0cf66c8508f2f7)
|
|
Render isc-dhcp-server systemd unit from configuration
|
|
(cherry picked from commit 3fe5482a29042c92298d3e69d90c0c38404d2fcc)
|
|
T5533: Fix VRRP IPv6 group enters in FAULT state
|
|
Checks if an IPv6 address on a specific network interface is
in the tentative state. IPv6 tentative addresses are not fully configured
and are undergoing Duplicate Address Detection (DAD) to ensure they are
unique on the network.
inet6 2001:db8::3/125 scope global tentative
It tentative state the group enters in FAULT state. Fix it
|
|
The following command expects to join source-specific multicast group 239.1.2.3
on interface eth0, where the source address is 192.0.2.1.
set protocols igmp interface eth0 join 239.1.2.3 source 192.0.2.1
This command should generate FRR config:
interface eth0
ip igmp
ip igmp join 239.1.2.3 192.0.2.1
exit
However, there is a bug in the Jinja template where `if ifaces[iface].gr_join[group]`
is mostly evaluated as `false` because `iface` is a loop variable from another loop.
|
|
T5536: Fix show dhcp client leases
|
|
|
|
Fix helpers was moved to vyos.utils package
Fix empty new address from the lease file causes
OSError: illegal IP address string passed to inet_pton
|
|
T5531: Containers add label option
|
|
eapol: T4782: Support multiple CA chains
|
|
Ability to set labels for container
set container name c1 allow-host-networks
set container name c1 image 'busybox'
set container name c1 label mypods value 'My label for containers'
|
|
|
|
specified (correct ::/0 for ipv6). Also, add columns for inbound and outbound interfaces
|
|
correct reference in source/destination column
|
|
|
|
firewall: T5080: Disable conntrack unless required by rules
|
|
|
|
|
|
firewall: T3509: Add support for IPv6 reverse path filtering
|
|
interface-name or interface-group
|
|
|
|
|
|
save-config: T4292: rewrite vyatta-save-config.pl to Python
|