| Age | Commit message (Collapse) | Author |
|---|
|
(cherry picked from commit f43edbd7cd36f52a0cd9c475b53f317882f4a6f9)
|
|
T6242: load-balancing reverse-proxy: Ability for ssl backends to not verify server certificates (backport #3315)
|
|
onlink pretend that the nexthop is directly attached to this link,
even if it does not match any interface prefix.
Useful when gateway not in the same interface network
set interfaces ethernet eth0 vif 10 address '10.20.30.1/32'
set protocols static route 10.20.30.0/32 interface eth0.10
set protocols failover route 192.0.2.11/32 next-hop 10.20.30.0 onlink
```
vyos@r4# sudo ip route add 192.0.2.111/32 via 10.20.30.0 dev eth0.10 metric 1 proto failover
Error: Nexthop has invalid gateway.
[edit]
vyos@r4#
[edit]
vyos@r4# sudo ip route add 192.0.2.111/32 via 10.20.30.0 dev eth0.10 onlink metric 1 proto failover
[edit]
vyos@r4#
```
(cherry picked from commit bb832acb97881d747a57da2728eab3ad138b8129)
|
|
server certificates
(cherry picked from commit aafe22d08bb38a579dd5075fd27a1b88beeca791)
|
|
T5535: firewall: migrate command <set system ip disable-directed-broadcast> to firewall global-optinos (backport #3309)
|
|
(cherry picked from commit 9f9891a209957403dfa3ae9ec2cd56d8d9eedb86)
|
|
Check if DH is configured for OpenVPN but does not exist in the
PKI section
```
set pki dh dh-correct parameters 'xxxx'
set interfaces openvpn vtun10 tls dh-params 'dh-fake'
File "/usr/libexec/vyos/conf_mode/interfaces_openvpn.py", line 208, in verify_pki
pki_dh = pki['dh'][tls['dh_params']]
~~~~~~~~~^^^^^^^^^^^^^^^^^^
KeyError: 'dh-fake'
```
(cherry picked from commit 95cd743c24c6f7720af87450312fc111649db849)
|
|
to firewall global-optinos
(cherry picked from commit 76dcecafca977b640dd16d8e68c4a050ca1af4fb)
|
|
T5872: fix ipsec dhclient hook uses "exit" instead of "return" (backport #3302)
|
|
Added NAT migration from IP/Netmask to Network/Netmask.
In 1.3 allowed using IP/Netmask in Nat rules.
In 1.4 and 1.5 it is prohibited. Allowed Network/Netmask.
(cherry picked from commit 52c02ade031f165da18e6fd0542f3952f2cc9bb6)
|
|
(cherry picked from commit 840ab82e8821624aae589dec1ea86cefbcf866b7)
|
|
pppoe-server: T6141: T5364: PPPoE-server add pado-delay without sessions fails (backport #3296)
|
|
T6166: Tech support generation error for custom output location (backport #3242)
|
|
fails (#3296)
(cherry picked from commit 6d8336f5ad2d9c4e0f12b54681db2924d6998d2d)
|
|
errors when using character <+> in 1.3 in firewall groups and custom firewall chains.
(cherry picked from commit 36baf771b8ea52487bf6c913d2019f926acbc4f3)
|
|
(cherry picked from commit 6b5590ae3325320a2b6bbcb34086ddb178860160)
|
|
(cherry picked from commit 13ed4f9d489dd5b8ee80c5f2fdebf1b0565e9137)
|
|
(cherry picked from commit 619e2262e77621c6110164712fed0a42f16715e3)
|
|
There are cloud environments available where the maximum supported ethernet
MTU is e.g. 1450 bytes, thus we clamp this to the adapters maximum MTU value
or 1500 bytes - whatever is lower.
(cherry picked from commit 8296cc727066e739c178918a91cfc11d20d26fe1)
|
|
Commit 1b364428f ("login: T5875: restore home directory permissions only when
needed") added logic to chown the users home directory if it's UID changes.
This might happen when a user account is deleted and re-added to the system.
Under rar e circumstances it was possible that the implementation triggered
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
KeyError: 'getpwuid(): uid not found: XXXX'
This has been fixed by re-arranging the code path with an additional try/except
if the PW database information could not be retrieved leading to an implicit
chown() of the home directory to the user beeing added.
(cherry picked from commit 1165bb497ec2d6d1b3b12d6c03435b0210efe9e5)
|
|
ipoe: T6205: error in migration script logic while renaming mac-address to mac node (backport #3263)
|
|
'upper'
Commit b30faa43c (container: T6208: rename "cap-add" CLI node to "capability")
added an AttributeError referencing an out of scope variable.
This has been fixed.
(cherry picked from commit 2463bd292f14e46fdb26116791a89ca2eb651d17)
|
|
Commit a5ccc06c0 ("ipoe: T6205: error in migration script logic while renaming
mac-address to mac node") added a conditional path into the config which could
result in the migrated config not beeing written if precondition was not met.
(cherry picked from commit 2bbded1e485614d40b2e95165629487537fd1757)
|
|
Containers have the ability to add Linux system capabilities to them, this is
done using the "set container name <name> cap-add" command.
The CLI node sounds off and rather should be "set container name <name>
capability" instead as we use and pass a capability to a container and not
add/invent new ones.
(cherry picked from commit b30faa43c28b592febd83a7fd3a58247de6b27bc)
|
|
mac node
The problem was introduced in [1] but the config migrator part unfortunately
was added to the wrong version [2]. As IPoE config version 0 was only active
during the 1.3 development cycle and VyOS 1.3.0 was already released with config
version 1 we can safely drop the migrator 0-to-1 and move the code to 1-to-2 to
properly support upgrades from VyOS 1.3 -> 1.4 or newer.
1: https://github.com/vyos/vyos-1x/commit/05df2a5f021f0c7aab7c06db645d210858b6e98d#diff-08291bf77870abe3af8bbe3e8ce4bbf344fd0498b2c5c75a75aa7235d381c88eL168
2: https://github.com/vyos/vyos-1x/commit/05df2a5f021f0c7aab7c06db645d210858b6e98d#diff-b8bb58b75607d3653e74d82eff02442f9f3ab82698f160ba37858f7cdf6c79ccR44-R46
(cherry picked from commit a5ccc06c08d3a9696f1c03c8d0c7de78ce1fd3c5)
|
|
T6203: remove obsoleted xml lib (backport #3255)
|
|
T6188: add description to show firewall (backport #3219)
|
|
For readability in console sessions, moved the description column to only be shown in the detail view.
Changed wrapping in the detail view for description to 65 characters to prevent full line wrapping in console sessions.
(cherry picked from commit 4dba82c7517f4a93b9727d22104e4a339bad127a)
|
|
- modified: src/op_mode/firewall.py
Changed behavior of "show firewall" for specific rule to only show rule and not also default-action
(cherry picked from commit a7c5205ab12e767c6c60887033694c597e01f21b)
|
|
- Added show firewall <sections> detail paths
modified: src/op_mode/firewall.py
- Added Description as a header to normal "show firewall" commands
- Added 'detail' view which shows the output in a list key-pair format
Description column was added for these commands and their subsections:
show firewall statistics
show firewall groups
show firewall <family>
Detail view was added for these commands:
show firewall bridge forward filter detail
show firewall bridge forward filter rule <rule#> detail
show firewall bridge name <chain> detail
show firewall bridge name <chain> rule <rule#> detail
show firewall ipv4 forward filter detail
show firewall ipv4 forward filter rule <rule#> detail
show firewall ipv4 input filter detail
show firewall ipv4 input filter rule <rule#> detail
show firewall ipv4 output filter detail
show firewall ipv4 output filter rule <rule#> detail
show firewall ipv4 name <chain> detail
show firewall ipv4 name <chain> rule <rule#> detail
show firewall ipv6 forward filter detail
show firewall ipv6 forward filter rule <rule#> detail
show firewall ipv6 input filter detail
show firewall ipv6 input filter rule <rule#> detail
show firewall ipv6 output filter detail
show firewall ipv6 output filter rule <rule#> detail
show firewall ipv6 name <chain> detail
show firewall ipv6 name <chain> rule <rule#> detail
show firewall group detail
show firewall group <group> detail
(cherry picked from commit 025438ccacc654274efbd3bea8b13fcc73ae08b6)
|
|
(cherry picked from commit b2ced47bdc547ada59b37e6617422188e150282c)
|
|
(cherry picked from commit 489e6fababa60d9c0fbfdb421305cbe563432499)
# Conflicts:
# src/migration-scripts/dhcp-server/9-to-10
# src/migration-scripts/dhcpv6-server/3-to-4
|
|
(cherry picked from commit aa1fb0733f18dfb0ccdfb37df36839c6a358d8ee)
|
|
The option "passive-interface default" was set even if it was not present in
the previous version we are migrating from. Fix migration script to handle this
with a conditional path.
(cherry picked from commit ef8d9a73335bc685084e3ff97238836e452dfa8c)
|
|
(cherry picked from commit 9b4a3bc54ec6d2ff8e435add5e2de995a54dfc6a)
|
|
(cherry picked from commit d403117cdb5e7718c8590cfeb79a336cb5b67aac)
|
|
T6199: spring cleaning - drop unused Python imports (backport #3240)
|
|
(cherry picked from commit bec23808af82b0f84e8a7707bbd56839da2c48b0)
|
|
found using "git ls-files *.py | xargs pylint | grep W0611"
(cherry picked from commit 274b2da242acd1f1f64ff1dee471e34295137c5f)
|
|
* Use interface_exists() outside of verify()
* Use verify_interface_exists() in verify() to drop common error message
(cherry picked from commit 4c7c168fe970b807750a05ceb66b70c0d8652535)
|
|
<high-availability>. Also, add <mode> parameter in order to configure active-active or active-passive behavior for HA.
|
|
T6192: allow binding SSH to multiple VRF instances (backport #3229)
|
|
The next evolutional step after adding get_config_dict(..., with_pki=True) is
to add a common verification function for the recurring task of validating SSL
certificate existance in e.g. EAPoL, OpenConnect, SSTP or HTTPS.
(cherry picked from commit 3b758d870449e92fece9e29c791b950b332e6e65)
|
|
Currently VyOS only supports binding a service to one individual VRF. It might
become handy to have the services (initially it will be VRF, NTP and SNMP) be
bound to multiple VRFs.
Changed VRF from leafNode to multi leafNode with defaultValue: default - which
is the name of the default VRF.
(cherry picked from commit e5af1f0905991103b12302892e6f0070bbb7b770)
|
|
(cherry picked from commit 5bb27f0c6220fd940b63cdd37a60c312c0ac3efd)
|
|
(cherry picked from commit 0529371bc587e2fcdd8794061e9bb9d60c792c43)
|
|
(cherry picked from commit f1c51884fb62d3917e92af51d4219e291c7a8e74)
|
|
(cherry picked from commit 462ba67cf2e193883e33b4ce655b2b0cd1aab80f)
|
|
(cherry picked from commit f92ef7f3c86ca09775b536ca2bd9813f95cc7d3f)
|
|
(cherry picked from commit a33946630348371518247ff13ce918c208ef50d1)
|
