summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2023-12-21nat66: T2898: build fix after ndp-proxy backportChristian Breunig
2023-12-21T2898: add ndp-proxy serviceChristian Breunig
VyOS CLI command set service ndp-proxy interface eth0 prefix 2001:db8::/64 mode 'static' Will generate the following NDP proxy configuration $ cat /run/ndppd/ndppd.conf # autogenerated by service_ndp-proxy.py # This tells 'ndppd' how often to reload the route file /proc/net/ipv6_route route-ttl 30000 # This sets up a listener, that will listen for any Neighbor Solicitation # messages, and respond to them according to a set of rules proxy eth0 { # Turn on or off the router flag for Neighbor Advertisements router no # Control how long to wait for a Neighbor Advertisment message before invalidating the entry (milliseconds) timeout 500 # Control how long a valid or invalid entry remains in the cache (milliseconds) ttl 30000 # This is a rule that the target address is to match against. If no netmask # is provided, /128 is assumed. You may have several rule sections, and the # addresses may or may not overlap. rule 2001:db8::/64 { static } } (cherry picked from commit 4d721a58020971d00ab854c37b68e88359999f9c)
2023-12-21T5804: nat: remove inbound|outbound interface from old configuration when it ↵Nicolas Fort
was set to <any>. (cherry picked from commit 5cb95aed965b45a900c6ba97c0bccefed83332b6)
2023-12-21dhcp: T5846: Refactor and simplify DUID definitionIndrajit Raychaudhuri
Refactor DUID XML definition in conf-mode to be reusable. Additionally, remove explicit call to a separate validator `ipv6-duid` and inline the regex into the XML definition. (cherry picked from commit 51e7832fc5c88f9956b26157a80947bad4495a4e)
2023-12-20https api: T5844: allow the server to start without API keysDaniil Baturin
and use only PAM auth and JWT (cherry picked from commit 495bf4732439ebd55edfbf6050af8b2064993d86)
2023-12-20https api: T5844: issue a warning about the classic API unavailabilityDaniil Baturin
when no API keys are set (cherry picked from commit 7bad0e115ecc25224a0c3a2720a2697442624229)
2023-12-20T5798: load-balancing revese-proxy add multiple SSL certificatesViacheslav Hletenko
Add ability to configure multiple SSL certificates for frontend/service set load-balancing reverse-proxy service web mode http set load-balancing reverse-proxy service web port 443 set load-balancing reverse-proxy service web ssl certificate cert1 set load-balancing reverse-proxy service web ssl certificate cert2 (cherry picked from commit fe99c45e05fd5794905145ddca80e6078145c2e8)
2023-12-19T5823: Add recursive_defaults for BGP get_config dictionaryViacheslav Hletenko
Add recursive_defaults values for BGP "get_config" dictionary. (cherry picked from commit 4d5445740a1529691594263af22f2a9d07bbfe70)
2023-12-18T4163: Add BGP Monitoring Protocol BMP featureViacheslav Hletenko
Add BMP feature. BMP (BGP Monitoring Protocol, RFC 7854) is used to send monitoring data from BGP routers to network management entities https://docs.frrouting.org/en/latest/bmp.html Example: set system frr bmp commit run restart bgp set protocols bgp system-as '65001' set protocols bgp neighbor 192.0.2.11 address-family ipv4-unicast set protocols bgp neighbor 192.0.2.11 remote-as '65001' set protocols bgp bmp mirror-buffer-limit '256000000' set protocols bgp bmp target foo address '127.0.0.1' set protocols bgp bmp target foo port '5000' set protocols bgp bmp target foo min-retry '1000' set protocols bgp bmp target foo max-retry '2000' set protocols bgp bmp target foo mirror set protocols bgp bmp target foo monitor ipv4-unicast post-policy set protocols bgp bmp target foo monitor ipv4-unicast pre-policy set protocols bgp bmp target foo monitor ipv6-unicast post-policy set protocols bgp bmp target foo monitor ipv6-unicast pre-policy (cherry picked from commit 5523fccf4f7d05444c36c568128e94cd7b08c34f)
2023-12-16image-tools: T5825: restore authentication for add system imageJohn Estabrook
(cherry picked from commit 7ee9297a90625609e568394c9f5ea63e8c95a54b)
2023-12-16T5827: moved sys image sort to grub version_listTrae Santiago
(cherry picked from commit d01aba1f5055cdaa43c8429a2c13580679ec12f7)
2023-12-16T5827: made show system image alphabeticalTrae Santiago
(cherry picked from commit d2b29be237b790bb1a258647adf30c8b96c0b526)
2023-12-16T5827: made show system image alphabeticalTrae Santiago
(cherry picked from commit 2f8b22685065f25183133431502322decede6371)
2023-12-16image-tools: T5821: restore vrf-aware add system imageJohn Estabrook
(cherry picked from commit 90f2d9865051b00290dd5b7328a046e823b658dc)
2023-12-16image-tools: T5806: deactive raid arraysJohn Estabrook
(cherry picked from commit e3cd779d0bd8dd8be6231c7b2028326a03e6a06c)
2023-12-16image-tools: T5819: do not echo password on image installJohn Estabrook
(cherry picked from commit cf83979636c686a459d6dc75dcd98e342c70b1b3)
2023-12-16image-tools: T5758: restore saving previous data on installJohn Estabrook
Restore scanning previous installations for config data and ssh host keys on install. (cherry picked from commit 32551842bb0f710f590e8c030395a3a7902aa1df)
2023-12-16image-tools: T5789: copy ssh host keys on image updateJohn Estabrook
(cherry picked from commit 393b3ccf02902e765bd5cf603d770ba8cad22e75)
2023-12-16image-tools: T5751: restore arg raise_error for non-interactive useJohn Estabrook
(cherry picked from commit 35f69340ef189e27b380074bb687ad58f29e9433)
2023-12-16image-tools: T5751: add arg no_prompt for non-interactive callsJohn Estabrook
(cherry picked from commit 0fae5b412a359874f1d61a5330064e87a7e6b899)
2023-12-16image-tools: T5751: normalize args using hyphen instead of underscoreJohn Estabrook
(cherry picked from commit bb578a1cab177e8cee6e4d02144d21387ba13a93)
2023-12-16image-tools: T4516: exit grub-update service if running in dockerJohn Estabrook
(cherry picked from commit 0b97bde2cb04cf5e23350798f972abcee4bfe4ee)
2023-12-16image: T4516: add raid-1 install supportJohn Estabrook
(cherry picked from commit e036f783bc85e4d2bad5f5cbfd688a03a352223e)
2023-12-16image: T4516: ensure compatibility with legacy RAID 1 installsJohn Estabrook
(cherry picked from commit bd701768796d6ebb03ca943faf96d1dbea030edd)
2023-12-16image: T4516: variable name spellingJohn Estabrook
(cherry picked from commit fc5dc00a3892fa26d03213854ea5091d6b0c2c18)
2023-12-16image: T4516: restore select entry to set/delete imageJohn Estabrook
(cherry picked from commit 9ffa3e82d951756696367578dd5e82ef0f690065)
2023-12-16image: T4516: do not prompt for confirmation when setting defaultJohn Estabrook
(cherry picked from commit 3d15cfd484e8c2732d9f10e4065f2282f1f5d334)
2023-12-16image: T4516: reword some messages and promptsJohn Estabrook
(cherry picked from commit cdc5fddfd796ccf7cfe35d2501cb1da380df53b2)
2023-12-16image: T4516: add clearer error msg on attempt to upgrade to 1.2.xJohn Estabrook
An attempt to upgrade to 1.2.x is caught, but error is of failed checksum verification; add check and message. (cherry picked from commit aae1247da61206d7a1b0b4d6ee20d36d194dbaba)
2023-12-16image: T4516: use copy of pw_reset script for install, link for compatJohn Estabrook
Note that this was updated for the fix in T5739. (cherry picked from commit 424c9b19fd54598081e965c3364b082c5ef984de)
2023-12-16image: T4516: support for interoperability of legacy/new image toolsJohn Estabrook
This commit allows management of system images with either new or legacy tools: 'add/delete/rename system image' and 'set default' are translated appropriately on booting between images with the old and new tools. Consequently, the warning of the initial commit of T4516 is dropped. (cherry picked from commit 96b65e90fbfa1fe63d97929ac86fc910abb0caa9)
2023-12-16image: T4516: improve format of 'show system image details'John Estabrook
(cherry picked from commit 8efab9ee8cdb0e65dddb9d3ba97de8ddcf3666dc)
2023-12-16image: T5195: vyos.util -> vyos.utils package refactoringJohn Estabrook
(cherry picked from commit fcded7930b5426193e8490c6df2a70e300a60e31)
2023-12-16image: T4516: restore reboot reminder messageJohn Estabrook
(cherry picked from commit a604d5d56d93a6958d879b838066bbe2df131bc5)
2023-12-16image: T4516: set op-mode files executableJohn Estabrook
(cherry picked from commit d88168b8e26e46d512e3b175cd2eacecae0e596a)
2023-12-16image: T4516: do not prompt for config copy on live installJohn Estabrook
(cherry picked from commit b31092cc33685628c74845f2aa1e94f0e7879e87)
2023-12-16image: T4516: service vyos-grub-update should exit on live bootJohn Estabrook
(cherry picked from commit 7d6c262976eba624b935c96a7495cc392158b8ff)
2023-12-16image: T4516: correct implementation of configure_authenticationJohn Estabrook
(cherry picked from commit 169c9ff01287cb558850479afb733dd53fb6ae5d)
2023-12-16image: T4516: correct permissions on creation of config directoryJohn Estabrook
(cherry picked from commit 74b00c1f6961d1bd3a59768021f154bdb64c154e)
2023-12-16image: T4516: Added system image toolszsdc
This commit adds the whole set of system image tools written from the scratch in Python that allows performing all the operations on images: * check information * perform installation and deletion * versions management Also, it contains a new service that will update the GRUB menu and keep tracking its version in the future. WARNING: The commit contains non-reversible changes. Because of boot menu changes, it will not be possible to manage images from older VyOS versions after an update. (cherry picked from commit 8f94262e8fa2477700c50303ea6e2c6ddad72adb)
2023-12-15T5575: Update migration scripts for state policy parsingNicolas Fort
2023-12-15frr: T4020: add option to define number of open file descriptorsChristian Breunig
This allows the operator to control the number of open file descriptors each daemon is allowed to start with. The current assumed value on most operating systems is 1024. If the operator plans to run bgp with several thousands of peers then this is where we would modify FRR to allow this to happen. set system frr descriptors <n> (cherry picked from commit 892c28ccf634173d4c4952c248cb03974c560793)
2023-12-13srv6: T591: initial implementation to support locator definitionChristian Breunig
VyOS CLI set protocols segment-routing srv6 locator bar prefix '2001:b::/64' set protocols segment-routing srv6 locator foo behavior-usid set protocols segment-routing srv6 locator foo prefix '2001:a::/64' Will generate in FRR segment-routing srv6 locators locator bar prefix 2001:b::/64 block-len 40 node-len 24 func-bits 16 exit ! locator foo prefix 2001:a::/64 block-len 40 node-len 24 func-bits 16 behavior usid exit ! exit ! exit ! exit (cherry picked from commit ca301cdd4746187f96ff84e411fda6a84e33f237)
2023-12-13bgp: T591: add SRv6 support from FRRChristian Breunig
set protocols bgp sid vpn per-vrf export '99' set protocols bgp srv6 locator 'foo' set protocols bgp system-as '100' Will generate in FRR config router bgp 100 no bgp ebgp-requires-policy no bgp default ipv4-unicast no bgp network import-check ! segment-routing srv6 locator foo exit sid vpn per-vrf export 99 exit (cherry picked from commit af46fe54e56cf85d13b62ee771bec3d80f225ac5)
2023-12-13validator: T5816: large community validator should only allos character set ↵Trae Santiago
and basic format (cherry picked from commit 5acc655c316216122ba975f30df7b76f161cbf02)
2023-12-11T5807: fix op-mode command <show nat66>, which only display rules if nat was ↵Nicolas Fort
configured. In this commit, check is fixed and rules are printed as expected. (cherry picked from commit 3d3418d1585cbb6d3c2d1d81d310a3107e16c4aa)
2023-12-10migration: T5413: re-sequence interfaces migration scriptsChristian Breunig
PR https://github.com/vyos/vyos-1x/pull/2540 backported a migration script from current to the equuleus LTS branch. As migration scripts are executed in order to adjust the CLI for necessary improvements in future LTS releases we need to change the versioning of the migration files to match the new "base" version from the previous LTS release. In theory this could break very ancient 1.4 rolling releases (from the early days of the OSPF refactoring) - but those versions are considered very much unstable. Now this is the last chance to sync up the migration scripts before the 1.4 LTS release. (cherry picked from commit 98ca0984312257a09b57d4aac60ff4abf7f84e66)
2023-12-10T5791: DNS dynamic exclude check for dynamic interfaces PPPoEViacheslav Hletenko
Dynamic interfaces such as PPPoE/sstpc can not exist during verification dns dynamic. As they added and removed dynamically. Add interface_filter to exclude them from checks (cherry picked from commit 0a1c9bc38440c86cbbc016fb6d8f7d6f36993652)
2023-12-08login: T4943: use pam-auth-update to enable/disable Google authenticatorChristian Breunig
The initial version always enabled Google authenticator (2FA/MFA) support by hardcoding the PAM module for sshd and login. This change only enables the PAM module on demand if any use has 2FA/MFA configured. Enabling the module is done system wide via pam-auth-update by using a predefined template. Can be tested using: set system login user vyos authentication plaintext-password vyos set system login user vyos authentication otp key 'QY735IG5HDHBFHS5W7Y2A4EM274SMT3O' See https://docs.vyos.io/en/latest/configuration/system/login.html for additional details. (cherry picked from commit e134dc4171b051d0f98c7151ef32a347bc4f87e2)
2023-12-08Merge pull request #2581 from vyos/mergify/bp/sagitta/pr-2578Viacheslav Hletenko
T160: add NAT64 (backport #2578)
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-29 16:45:52 +0000