summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2019-06-22bfd: T1183: add rx/tx interval configurationChristian Poessinger
vyos@vyos# show protocols bfd { peer 1.1.1.1 { interval { receive 400 transmit 300 } } }
2019-06-22bfd: T1183: multihop doesn't accept interface namesChristian Poessinger
2019-06-22bfd: T1183: add support to configure detection multiplierChristian Poessinger
Configures the detection multiplier to determine packet loss. The remote transmission interval will be multiplied by this value to determine the connection loss detection timer. The default value is 3. Example: when the local system has detect-multiplier 3 and the remote system has transmission interval 300, the local system will detect failures only after 900 milliseconds without receiving packets.
2019-06-22bfd: T1183: adjust CLI syntax for source address/interfaceChristian Poessinger
Place address/interface under new source node. vyis@vyos# show protocols bfd peer 1.1.1.1 { source { address 1.2.3.4 interface eth0.201 } }
2019-06-22bfd: T1183: add support for multihopChristian Poessinger
multihop tells the BFD daemon that we should expect packets with TTL less than 254 (because it will take more than one hop) and to listen on the multihop port (4784). When using multi-hop mode echo-mode will not work (see RFC 5883 section 3).
2019-06-22bfd: T1183: first working FRR bfd peer configurationChristian Poessinger
2019-06-22bfd: T1183: IPv6 peers require explicit local address/interfaceChristian Poessinger
2019-06-22bfd: T1183: initial CLI implementationChristian Poessinger
vyos@vyos# show protocols bfd peer 172.18.202.10 { local-address 172.18.201.10 local-interface eth0.201 shutdown } peer 172.18.202.12 { shutdown }
2019-06-20firewall: T1461: deleting 'firewall options' causes Python TypeErrorChristian Poessinger
[ firewall options interface wg01 ] Traceback (most recent call last): File "/usr/libexec/vyos/conf_mode/firewall_options.py", line 139, in <module> apply(c) File "/usr/libexec/vyos/conf_mode/firewall_options.py", line 97, in apply if tcp['new_chain4']: TypeError: 'NoneType' object is not subscriptable delete [ firewall options ] failed delete [ firewall ] failed Commit failed
2019-06-20T1458: Regression in 1.2.1-S2 hostname & loggingKim Hagen
2019-06-19[wireguard] T1425 - assign a /31 address on Wireguard interfacehagbard
- added a validator for checking if the address is any cidr noted address
2019-06-18[pppoe-server] T1452 - add vendor option to shaperhagbard
2019-06-18[ config ] T1447: Python subprocess called without import in host_name.pyKim Hagen
2019-06-17[HTTP API] T1431: disallow empty config paths.Daniil Baturin
2019-06-17[HTTP API] T1431: make the value field optional.Daniil Baturin
2019-06-17Merge branch 'current' of https://github.com/vyos/vyos-1x into currentDaniil Baturin
2019-06-17[HTTP API] T1431: allow sending a single command, and make sure commands are ↵Daniil Baturin
dicts.
2019-06-17[syslog/hostname.py] T1394 - syslog systemd and host_name.py race conditionhagbard
- checking if the hostname has changed, otherwise the script and systemd try to restart rsyslogd at the same time, at the end it's not started at all.
2019-06-17[HTTP API] T1431: make the value field optional and add better validation.Daniil Baturin
2019-06-17[HTTP API] T1431: make systemd restart the HTTP API service on failure.Daniil Baturin
2019-06-17[pppoe-server] T1408 - improve verify() function to enable IPv6 only deploymentshagbard
2019-06-17Merge branch 'current' of https://github.com/vyos/vyos-1x into currentDaniil Baturin
2019-06-17T1431: release the lock even if discard() caused an exception.Daniil Baturin
It may be better to crash the process in that situation.
2019-06-17T1431: Fix vyos-http-server logging to journald.Daniil Baturin
2019-06-16T1439: move DUID validator to regexJernej Jakob
2019-06-16T1439: add dhcpv6-client-id validatorJernej Jakob
2019-06-16T1439: remove quotes around dhcp6.client-idJernej Jakob
2019-06-16T1431: initial implementation of the HTTP API.Daniil Baturin
2019-06-16Revert "T849: move BGP peer-group node to ipv4 address family"Christian Poessinger
This reverts commit 685b1e0d050c7883303733d710327161fe046b60.
2019-06-16T849: move BGP peer-group node to ipv4 address familyChristian Poessinger
To have a consitent IPv4/IPv6 CLI a lot of BGP neighbor nodes have been migrated. The IPv4 peer-group has been forgotten, leaving a non consistent CLI. Previously: ----------- neighbor 2001:DB8:FFFF::1 { address-family { ipv6-unicast { peer-group iBGP } } peer-group iBGP } Now: ---- neighbor 2001:DB8:FFFF::1 { address-family { ipv6-unicast { peer-group iBGP } } address-family { ipv4-unicast { peer-group iBGP } } }
2019-06-16DHCPDv6 T1433: rename daemon configuration fileChristian Poessinger
... to have the same pattern as the DHCPDv6 lease file
2019-06-16DHCPDv6 T1433: fix wrong lease file nameChristian Poessinger
A wrong lease file caused the show command to fail: vyos@vyos:~$ show dhcpv6 server leases Traceback (most recent call last): File "/usr/libexec/vyos/op_mode/show_dhcpv6.py", line 81, in <module> leases = get_leases(lease_file, state='active') File "/usr/libexec/vyos/op_mode/show_dhcpv6.py", line 44, in get_leases leases = IscDhcpLeases(lease_file).get() File "/usr/lib/python3/dist-packages/isc_dhcp_leases/iscdhcpleases.py", line 110, in get with open(self.filename) as lease_file: FileNotFoundError: [Errno 2] No such file or directory: '/config/dhcpdv6.leases'
2019-06-12T1397: check for path argument in both effective and merge configJohn Estabrook
The merge config script restores the ability to restrict changes to a specified path. In the initial implementation, the path was checked for validity only with respect to the effective config; fix to allow valid paths from merge config as well.
2019-06-12T1397: use revised migration methodJohn Estabrook
2019-06-12T1397: escape backslashes in output passed to configtreeJohn Estabrook
The ouput of config.show_config (cli-shell-api showConfig) does not escape backslashes, whereas configtree expects escaped backslashes. Values containing unescaped backslashes consequently lead to a parsing error; cf. T1001.
2019-06-10[wireguard] T1428: Add handling of fwmark setting (#70)Matthias Fetzer
[wireguard] T1428: correct handling of the fwmark option
2019-06-05T1334: Migration script runner rewriteJohn Estabrook
Python script and support code to replace the vyatta_config_migrate.pl script.
2019-06-05T1422: Remove extraneous print statement.John Estabrook
2019-06-04T1379: Deprecated functions in /sbin/dhclient-scriptKim Hagen
2019-06-01T1422: fix wrong file mode.Daniil Baturin
2019-06-01T1422: add a script for querying values in config files.Daniil Baturin
2019-05-30[dhcp] T1416: fix DHCP server status viewChristian Poessinger
2019-05-29T1397: Rewrite the config merge scriptJohn Estabrook
Add the script vyos-merge-config.py to separate the merge function from the config load script and remove dependency on XorpConfigParser.
2019-05-21[pppoe-server] T1393 - pppoe IPv6 pool doesn't workhagbard
2019-05-13T1378: extend version file with Git commit IDChristian Poessinger
The Git commit ID will be crucial for the future when the full VyOS build can be reproduced by the one Git commit ID, thus start recording it in the version file.
2019-05-08T805: Drop config compatibility with Vyatta Core older than 6.5John Estabrook
Rewrite vyatta-config-migrate/migrate/system/6-to-7 in the canonical style and add to vyos-1x migration-scripts. This completes the collection of scripts needed to drop compatability with Vyatta Core older than 6.5.
2019-05-08[VRRP] T1371: add quotes around the health check script string.Daniil Baturin
2019-05-05[dhcp-server] T103: wrong hostnames in hosts fileChristian Poessinger
2019-04-27[rsyslog] T1358 - typo fixed os.path.existshagbard
2019-04-26[pppoe-server] adding CIDR based prefixes as client-ip-pool optionhagbard
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-01 02:02:07 +0000