| Age | Commit message (Collapse) | Author |
|---|
|
onlink pretend that the nexthop is directly attached to this link,
even if it does not match any interface prefix.
Useful when gateway not in the same interface network
set interfaces ethernet eth0 vif 10 address '10.20.30.1/32'
set protocols static route 10.20.30.0/32 interface eth0.10
set protocols failover route 192.0.2.11/32 next-hop 10.20.30.0 onlink
```
vyos@r4# sudo ip route add 192.0.2.111/32 via 10.20.30.0 dev eth0.10 metric 1 proto failover
Error: Nexthop has invalid gateway.
[edit]
vyos@r4#
[edit]
vyos@r4# sudo ip route add 192.0.2.111/32 via 10.20.30.0 dev eth0.10 onlink metric 1 proto failover
[edit]
vyos@r4#
```
|
|
T6100: Added NAT migration from IP/Netmask to Network/Netmask
|
|
|
|
fails (#3296)
|
|
Added NAT migration from IP/Netmask to Network/Netmask.
In 1.3 allowed using IP/Netmask in Nat rules.
In 1.4 and 1.5 it is prohibited. Allowed Network/Netmask.
|
|
firewall: T6216: replace plus symbols (allowed by IPset but not NFT) in group names with underscores
|
|
T5169: Add PoC for generating CGNAT rules rfc6888
|
|
errors when using character <+> in 1.3 in firewall groups and custom firewall chains.
|
|
|
|
Add PoC for generating CGNAT rules
https://datatracker.ietf.org/doc/html/rfc6888
Not all requirements are implemented, but some of them.
Implemented:
REQ-2
```
A CGN MUST have a default "IP address pooling" behavior of "Paired"
CGN must use the same external IP
address mapping for all sessions associated with the same internal
IP address, be they TCP, UDP, ICMP, something else, or a mix of
different protocols.
```
REQ-3
```
The CGN function SHOULD NOT have any limitations on the size
or the contiguity of the external address pool
```
REQ-4
```
A CGN MUST support limiting the number of external ports (or,
equivalently, "identifiers" for ICMP) that are assigned per
subscriber
```
CLI:
```
set nat cgnat pool external ext1 external-port-range '1024-65535'
set nat cgnat pool external ext1 per-user-limit port '1000'
set nat cgnat pool external ext1 range 192.0.2.222/32
set nat cgnat pool internal int1 range '100.64.0.0/28'
set nat cgnat rule 10 source pool 'int1'
set nat cgnat rule 10 translation pool 'ext1'
```
|
|
|
|
|
|
|
|
ethernet: T5862: default MTU is not acceptable in some environments
|
|
login: T5875: fix corner case for KeyError: 'getpwuid(): uid not found: XXXX'
|
|
|
|
'upper'
Commit b30faa43c (container: T6208: rename "cap-add" CLI node to "capability")
added an AttributeError referencing an out of scope variable.
This has been fixed.
|
|
Commit a5ccc06c0 ("ipoe: T6205: error in migration script logic while renaming
mac-address to mac node") added a conditional path into the config which could
result in the migrated config not beeing written if precondition was not met.
|
|
Commit 1b364428f ("login: T5875: restore home directory permissions only when
needed") added logic to chown the users home directory if it's UID changes.
This might happen when a user account is deleted and re-added to the system.
Under rar e circumstances it was possible that the implementation triggered
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
KeyError: 'getpwuid(): uid not found: XXXX'
This has been fixed by re-arranging the code path with an additional try/except
if the PW database information could not be retrieved leading to an implicit
chown() of the home directory to the user beeing added.
|
|
Containers have the ability to add Linux system capabilities to them, this is
done using the "set container name <name> cap-add" command.
The CLI node sounds off and rather should be "set container name <name>
capability" instead as we use and pass a capability to a container and not
add/invent new ones.
|
|
mac node
The problem was introduced in [1] but the config migrator part unfortunately
was added to the wrong version [2]. As IPoE config version 0 was only active
during the 1.3 development cycle and VyOS 1.3.0 was already released with config
version 1 we can safely drop the migrator 0-to-1 and move the code to 1-to-2 to
properly support upgrades from VyOS 1.3 -> 1.4 or newer.
1: https://github.com/vyos/vyos-1x/commit/05df2a5f021f0c7aab7c06db645d210858b6e98d#diff-08291bf77870abe3af8bbe3e8ce4bbf344fd0498b2c5c75a75aa7235d381c88eL168
2: https://github.com/vyos/vyos-1x/commit/05df2a5f021f0c7aab7c06db645d210858b6e98d#diff-b8bb58b75607d3653e74d82eff02442f9f3ab82698f160ba37858f7cdf6c79ccR44-R46
|
|
There are cloud environments available where the maximum supported ethernet
MTU is e.g. 1450 bytes, thus we clamp this to the adapters maximum MTU value
or 1500 bytes - whatever is lower.
|
|
T6199: remove unused Python imports from migration scripts
|
|
|
|
T6188: add description to show firewall
|
|
For readability in console sessions, moved the description column to only be shown in the detail view.
Changed wrapping in the detail view for description to 65 characters to prevent full line wrapping in console sessions.
|
|
|
|
The option "passive-interface default" was set even if it was not present in
the previous version we are migrating from. Fix migration script to handle this
with a conditional path.
|
|
T6199: drop unused Python imports from graphql source
|
|
|
|
bgp: T5943: BGP Peer-group members must be all internal or all external
|
|
T6068: dhcp-server: add command <set service dhcp-server high-availability mode>
|
|
|
|
|
|
mode> so user can define what type of ha use: active-active or active-passive
|
|
found using "git ls-files *.py | xargs pylint | grep W0611"
|
|
* Use interface_exists() outside of verify()
* Use verify_interface_exists() in verify() to drop common error message
|
|
configverify: T6198: add common helper for PKI certificate validation
|
|
The next evolutional step after adding get_config_dict(..., with_pki=True) is
to add a common verification function for the recurring task of validating SSL
certificate existance in e.g. EAPoL, OpenConnect, SSTP or HTTPS.
|
|
T6192: allow binding SSH to multiple VRF instances
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Currently VyOS only supports binding a service to one individual VRF. It might
become handy to have the services (initially it will be VRF, NTP and SNMP) be
bound to multiple VRFs.
Changed VRF from leafNode to multi leafNode with defaultValue: default - which
is the name of the default VRF.
|
|
|
