Age | Commit message (Collapse) | Author |
|
|
|
|
|
conntrack: firewall: T4502: Update conntrack check for new flowtable CLI
|
|
Also updates flowtable smoketest to verify conntrack enabled
|
|
init: T5239: configure system hostname prior to FRR startup
|
|
On first boot after an upgrade /etc/hostname and FRR configuration is not
populated. FRR determines the system hostname once during startup and does not
repect changes of the hostname CLI value.
Thus after an upgrade of VyOS FRR started with a hostname of debian that was
propagated to peers.
The commit retrieves the hostname from the CLI and presets this before FRR is
initially started.
|
|
supports HW flowtable offload
- Add required offload setting for interfaces + flowtable offload (hw-tc-offload)
- Verification of interface support for hardware offloaded flowtables
|
|
`set firewall flowtable <name> interface <ifname>`
`set firewall flowtable <name> offload [software|hardware]`
`set firewall [ipv4|ipv6] forward filter rule N action offload`
`set firewall [ipv4|ipv6] forward filter rule N offload-target <name>`
|
|
|
|
|
|
conntrack: T5571: Refactor conntrack using vyos.configdep
|
|
- Moves MSS node out of `tcp-flags.xml.i` and into `tcp-mss.xml.i`
- Update smoketest to verify TCP flag matching
|
|
/usr/libexec/vyos/conf_mode/nat.py:21: DeprecationWarning: The distutils package is deprecated and slated for removal in Python 3.12. Use setuptools or check PEP 632 for potential alternatives
from distutils.version import LooseVersion
|
|
firewall, nat, nat66
|
|
T5586: Disable by default SNMP for Keeplived VRRP service
|
|
T5261: Add AWS load-balancing tunnel handler
|
|
AgentX does not work stable. From time to time we see the system
service crashing/degrading if something is wrong with SNMP from
util net-snmp.
We should disable it by default and enable it only if configured.
set high-availability vrrp snmp
|
|
ddclient: T5585: Fix file access mode for dynamic dns configuration
|
|
After commit 976f82785 ("T5575: ARP/NDP table-size isnt set properly") the
system bootup process got interrupted as both system-ip.py and system-ipv6.py
tried to talk to FRR which was yet not started.
This has been fixed by using a conditional path to only execute when FRR service
has been enabled. This is safe to do as the initial commit call will has FRR
service running and the path will be executed.
|
|
ddclient.conf file is expected to have permission 600. We need to set
the permission explicitly while creating the file.
|
|
T4072: Firewall op-mode command: add bridge capabilities
|
|
T5561: nat: inbound|outbound interface should not be mandatory
|
|
T5575: ARP/NDP table-size isnt set properly
|
|
openvpn: T3214: fix server-ipv6 and nopool handling
|
|
T4502: firewall: Add software flow offload using flowtable
|
|
|
|
|
|
while configuring dNAT|sNAT rule
|
|
- Reuse existing utility functions to check if a boot is ongoing
(boot_configuration_complete())
- Run system_frr.py script to configure FRR daemon before initial launch
- Add safety net to always have FRR running on the system
This does yet not solve the error in T5239 but it's a small step towards
the solution.
|
|
|
|
|
|
The `rule` key could be not exists in the entry of the dictionary
for examppe `{'default_action': 'drop'}`
Fix it
|
|
T5518: Add basic MLD support
|
|
|
|
The following commands will enable nftables flowtable offload on interfaces eth0 eth1:
```
set firewall global-options flow-offload software interface <name>
set firewall global-options flow-offload hardware interface <name>
```
Generated nftables rules:
```
table inet vyos_offload {
flowtable VYOS_FLOWTABLE_software {
hook ingress priority filter - 1; devices = { eth0, eth1, eth2, eth3 };
counter
}
chain VYOS_OFFLOAD_software {
type filter hook forward priority filter - 1; policy accept;
ct state { established, related } meta l4proto { tcp, udp } flow add @VYOS_FLOWTABLE_software
}
}
```
Use this option to count packets and bytes for each offloaded flow:
```
set system conntrack flow-accounting
```
To verify a connection is offloaded, run
```
cat /proc/net/nf_conntrack|grep OFFLOAD
```
This PR follows firewalld's implementation: https://github.com/firewalld/firewalld/blob/e748b97787d685d0ca93f58e8d4292e87d3f0da6/src/firewall/core/nftables.py#L590
A good introduction to nftables flowtable: https://thermalcircle.de/doku.php?id=blog:linux:flowtables_1_a_netfilter_nftables_fastpath
|
|
container: T5563 Fix environment replaced by label
|
|
FRR supports a new way of configuring VLAN-to-VNI mappings for EVPN-VXLAN, when
working with the Linux kernel. In this new way, the mapping of a VLAN to a VNI
is configured against a container VXLAN interface which is referred to as a
'Single VXLAN device (SVD)'.
Multiple VLAN to VNI mappings can be configured against the same SVD. This
allows for a significant scaling of the number of VNIs since a separate VXLAN
interface is no longer required for each VNI.
Sample configuration of SVD with VLAN to VNI mappings is shown below.
set interfaces bridge br0 member interface vxlan0
set interfaces vxlan vxlan0 external
set interfaces vxlan vxlan0 source-interface 'dum0'
set interfaces vxlan vxlan0 vlan-to-vni 10 vni '10010'
set interfaces vxlan vxlan0 vlan-to-vni 11 vni '10011'
set interfaces vxlan vxlan0 vlan-to-vni 30 vni '10030'
set interfaces vxlan vxlan0 vlan-to-vni 31 vni '10031'
|
|
|
|
T5554: Disable sudo for PAM RADIUS
|
|
login: T4754: show configured 2FA OTP key
|
|
Disable sudo for PAM RADIUS template that slows down the CLI commands
To fix it add:
session [default=ignore success=2] pam_succeed_if.so service = sudo
|
|
Currently VyOS has `protocol igmp` option to enable IGMP querier and reports through FRR's pimd.
I would like to add support for IPv6 as well since FRR's IPv6 multicast functionality has significantly improved.
Enabling both MLD and IGMP on a VyOS router will allow us to turn on multicast snooping on layer-3 switches in dual-stack networks.
Example commands:
```
// Enable on interface eth0
set protocols pim6 interface eth0
// Explicitly join multicast group ff18::1234 on interface eth1
set protocols pim6 interface eth1 mld join ff18::1234
// Explicitly join source-specific multicast group ff38::5678 with source address 2001:db8::1 on interface eth1
set protocols pim6 interface eth1 mld join ff38::5678 source 2001:db8::1
```
|
|
T5412: Add support for extending config-mode dependencies in add-on packages
|
|
|
|
|
|
|
|
conntrack: T4309: T4903: Refactor `system conntrack ignore`, add IPv6 support and firewall groups
|
|
T5489: Add sysctl TCP congestion control by default to BBR
|
|
T5423: Fix for op-mode show vpn ike secrets
|
|
T5480: Ability to disable SNMP for keepalived service VRRP
|