summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2020-06-11dns forwarding: T2534: fix incorrect path in recursor override fileJernej Jakob
2020-06-11on-dhcp-event.sh: T2486: modify for new vyos-hostsd syntaxJernej Jakob
- remove already existing entry check in /etc/hosts as vyos-hostsd will handle it - vyos-hostsd-client syntax changed - change tag "DHCP-$client_ip" to "dhcp-server-$client_ip" to make it more distinct from dhcp client tag "dhcp-$intf"
2020-06-11vyos-hostsd-client: T2583: update for vyos-hostsd rewriteJernej Jakob
- add new commands as arguments - change boolean options with extra required string options to a single string option that supports multiple arguments (makes a list) - track done operations in an extra ops variable (required for apply option)
2020-06-11dns forwarding: T2486: add conf nodes 'addnta', 'recursion-desired', migratorJernej Jakob
Add new nodes for 'service dns forwarding domain': 'addnta': adds addNTA to lua-config-file 'recursion-desired': sets '+' before the zone in forward-zones-file The migrator sets both options for all configured domains. This is usually the desired config.
2020-06-11system: T2486: migrate disable-dhcp-nameservers to name-servers-dhcpJernej Jakob
The previous implementation only supported disabling DHCP nameservers for all interfaces, and was implemented improperly so it didn't work anyway. This migrates it to name-servers-dhcp <interface>, which allows us to enable just the interfaces we want to use for system DNS, identical in syntax to 'service dns forwarding dhcp <interface>'. The migrator searches through all interfaces that have address 'dhcp(v6)?' and adds them to the name-servers-dhcp list if disable-dhcp-nameservers is not set, else it does nothing.
2020-06-11host_name: T2486: remove pdns-recursor restartJernej Jakob
It shouldn't be required, if necessary it should be added to vyos-hostsd apply command.
2020-06-11host_name: T2486: configure vyos-hostsdJernej Jakob
Removes and adds all required settings.
2020-06-11host_name: T2486: remove conf.exists callsJernej Jakob
The getter methods will return empty values if config nodes don't exist, so there's no point in checking if they exist before.
2020-06-11host_name: T2486: move Config() call into mainJernej Jakob
Init Config once in main() and pass it to both get_config() and verify().
2020-06-11host_name: T2486: replace disable-dhcp-nameservers with name-servers-dhcpJernej Jakob
The previous implementation only supported disabling DHCP nameservers for all interfaces, and was implemented improperly so it didn't work anyway. It's safe to remove it completely. This adds support for a new config node name-servers-dhcp <interface>, which allows us to enable just the interfaces we want to use for system DNS, identical in syntax to 'service dns forwarding dhcp <interface>'. The new option works by adding tags to vyos-hostsd that we want to use to add nameservers to resolv.conf, same as adding tags for dns forwarding but for a different destination file. A config migrator will be added in a separate commit.
2020-06-11host_name: T2486: remove domain-search length limitationsJernej Jakob
Debian Buster doesn't have the length and character limitations of /etc/resolv.conf 'search' any more, it is unlimited. https://sourceware.org/bugzilla/show_bug.cgi?id=19569 (glibc >2.26)
2020-06-11host_name: T2486: change internal 'static-host-mapping' representationJernej Jakob
Change internal representation to the one required by vyos-hostsd.
2020-06-11dns forwarding: T2486: configure vyos-hostsdJernej Jakob
Removes and adds all required settings.
2020-06-11dns forwarding: T2486: generate recursor conf filesJernej Jakob
- generate recursor.conf, recursor.conf.lua - if recursor.vyos-hostsd.conf.lua and recursor.forward-zones.conf don't exist, create empty ones (they are/will be generated by vyos-hostsd)
2020-06-11dns forwarding: T2486: add warning for no dhcp, system or static nameserversJernej Jakob
Add warning that forwarding will operate as a recursor in case there are no nameservers configured.
2020-06-11dns forwarding: T2486: change internal handling of 'dhcp' nameserversJernej Jakob
Remove the old solution that retrieved dhcp tagged nameservers from hostsd and added it to nameservers, as it didn't work anyway (only once during configuration but it didn't update them later). This is now handled by vyos-hostsd, just retrieve the configured interfaces and send it the list of tags to use.
2020-06-11dns forwarding: T2486: change internal handling of 'system' config nodeJernej Jakob
Remove manual retrieval of 'system name-server' from config and adding it to the name servers list, as this is now handled by simply adding a 'system' tag in vyos-hostsd.
2020-06-11dns forwarding: T2486: remove unnecessary intermediate name_servers variableJernej Jakob
2020-06-11dns forwarding: T2486: change internal representation of 'domain' configJernej Jakob
Change internal representation to the new one expected by vyos-hostsd.
2020-06-11dns forwarding: T2486: move Config() call into mainJernej Jakob
As Config is required in both get_config and verify, init it once and pass it to both functions.
2020-06-11dns forwarding: T2486: remove unneeded --dhclient argumentJernej Jakob
The functionality was moved to vyos-hostsd.
2020-06-11dns forwarding: T2486: add paths to filesJernej Jakob
2020-06-11dhcp(v6)-server: T2583: run as 'dhcpd' userJernej Jakob
Add a 'dhcpd' system user that is a member of hostsd group and can connect to vyos-hostsd. Run dhcpd as this user.
2020-06-11vyos-hostsd: T2583: add hostsd groupJernej Jakob
To better control access from other daemons that may not be running as root, create a new group 'hostsd' to which the other daemons running users can be added. Run vyos-hostsd as root:hostsd to create the socket file with correct user and group.
2020-06-11vyos-hostsd: T2583: update systemd serviceJernej Jakob
- set RuntimeDirectory to vyos-hostsd - set RuntimeDirectoryPreserve in order to not delete the state file between service restarts (/run will be deleted across reboots as it's on a tmpfs but the state doesn't need to be saved across reboots anyway) - set WorkingDirectory to /run/vyos-hostsd
2020-06-11vyos-hostsd: T2583: partial rewriteJernej Jakob
- update copyright date - validate incoming JSON data against a schema with voluptuous - add usage help describing internal messages syntax at top of vyos-hostsd - move socket and state file to directory /run/vyos-hostsd - replace jinja2 rendering with vyos.template - move all templates out of the executable into dedicated data/templates dirs - move recursor.conf forward-zones-recurse to forward-zones-file - generate lua-config-file for pdns-recursor with addNTA - support adding custom forward zones for pdns-recursor with optional added NTA and/or recursion-desired - move search_domains from set_host_name to separate add/delete/get commands - unify functions to support abstracting them in the future - track number of internal changes in "changes" variable saved in state file (informational in apply function) - do not apply changes immediately, add apply function that applies all changes (to not reload pdns-recursor excessively for a large set of changes, users must call the apply function once at the end) - add pdns_rec_control function that supports sending arbitrary commands to rec_control (fix pdns-recursor process name that caused the old function to think pdns-recursor was never running) - create /run/powerdns if it doesn't exist (on boot vyos-hostsd starts before pdns-recursor but we need to put our generated conf files there) - abstract specific command functions (add_*/del_*) into general functions to manipulate various types of data in the state variable - add command types: - forward_zones (generate custom forward zones for pdns-recursor) - search_domains (move from set_host_name as dhcp client needs to change them too) - name_server_tags_recursor (to set tags whose nameservers are added to pdns-recursor) - name_server_tags_system (to set tags whose nameservers and search domains are added to /etc/resolv.conf) - change hosts data format to make more sense (move tag from within each host dict to the key for a list of host dicts) - do not remove state file when shut down cleanly, to not lose state when restarting vyos-hostsd service that's then impossible to restore without restarting the whole router - a reboot will remove the state file as it lives in a tmpfs (/run) - remove too verbose info log on every received message - set mode of socket to 770 to secure it against processes not in hostsd group
2020-06-11dns forwarding: T1595: remove references to old listen-on optionJernej Jakob
As part of T1595 listen-on was removed and migrated to listen-address, but some references to it stayed in the variable names and validator error message.
2020-06-11nat: T2571: fix failing negated CLI configurationsChristian Poessinger
tested using: set nat destination rule 399 description 'Redirect DNS iot VLAN' set nat destination rule 399 destination address '!192.168.67.243-192.168.67.244' set nat destination rule 399 destination port '53' set nat destination rule 399 inbound-interface bond10.204 set nat destination rule 399 log set nat destination rule 399 protocol 'tcp_udp' set nat destination rule 399 translation address '192.168.67.243' set nat destination rule 399 translation port '53' set nat destination rule 400 description 'Redirect DNS lan VLAN' set nat destination rule 400 destination address '!192.168.67.243-192.168.67.244' set nat destination rule 400 destination port '53' set nat destination rule 400 inbound-interface bond10.204 set nat destination rule 400 log set nat destination rule 400 protocol 'tcp_udp' set nat destination rule 400 translation address '192.168.67.243' set nat destination rule 400 translation port '53' set nat destination rule 401 description 'Redirect DNS guest VLAN' set nat destination rule 401 destination address '!192.168.67.243-192.168.67.244' set nat destination rule 401 destination port '53' set nat destination rule 401 inbound-interface bond10.204 set nat destination rule 401 log set nat destination rule 401 protocol 'tcp_udp' set nat destination rule 401 translation address '192.168.67.243' set nat destination rule 401 translation port '53'
2020-06-11ssh: T2321: add VRF supportChristian Poessinger
2020-06-11ssh: T2321: use list over string when working with Config()Christian Poessinger
2020-06-11wwan: T2241: bugfix VRF assignmentChristian Poessinger
2020-06-11console: T2569: run VGA console powersave on tty1Christian Poessinger
2020-06-11console: T2569: replicate console settings to grub.cfgChristian Poessinger
2020-06-09console: T2569: only start serial console if device existsChristian Poessinger
Only start console if it exists on the running system. If a user detaches a USB serial console and reboots - it should not fail!
2020-06-09console: T2529: migrate from ttyUSB device to new device in /dev/serial/by-busChristian Poessinger
During testing it was discovered that there is a well known problem (we had for ethernet interfaces) also in the serial port world. They will be enumerated and mapped to /dev/ttyUSBxxx differently from boot to boot. This is especially painful on my development APU4 board which also has a Sierra Wireless MC7710 LTE module installed. The serial port will toggle between ttyUSB2 and ttyUSB5 depending on the amount of serial port extenders attached (FT4232H). The shipped udev rule (/usr/lib/udev/rules.d/60-serial.rules) partly solves this by enumerating the devices into /dev/serial/by-id folder with their name and serial number - it's a very good idea but I've found that not all of the FT4232H dongles have a serial number programmed - this leads to the situation that when you plug in two cables with both having serial number 0 - only one device symlink will appear - the previous one is always overwritten by the latter one. Derive /usr/lib/udev/rules.d/60-serial.rules and create a /dev/serial/by-bus directory and group devices by attached USB root port.
2020-06-09console: T2570: remove support for Hayes ModemsChristian Poessinger
Support for Hayes modems has been long gone (1.2.x) and nobody cared. It was removed in commit d582bbaf3 ("update console settings for systemd") of vyatta-cfg-system. So as there have been zero complaints - cleanup the CLI.
2020-06-09netconsole: T2561: use migrator to delete config nodesChristian Poessinger
The current implementation only works once the system has been fully booted up and the config nodes have been process. So there is no "early" kernel debugging. It is started with priority 400 (after all network stuff) - thus it has a questionable at all for Kernel debugging. It would only make sense if the entire system is changed to supply the config stuff to the Kernel commandline and then send it to a dedicated MAC address target as network will be initialized late. As there are zero Phabricator tasks available and we do not know any user using this - the "feature" will be removed.
2020-06-09console: T2569: initial implementation with XML and PythonChristian Poessinger
Migrate the serial console subsystem to XML and Python.
2020-06-08T2559: Make the sensors automatically load necessary moduleskroy
2020-06-07op-mode: T2558: version: split out CPU infoChristian Poessinger
Instead of using "show version" as catch-all command for information rather add "show system cpu" op-mode command which is analogous to "show system memory" which deals with RAM.
2020-06-07Merge branch 'udev' of github.com:c-po/vyos-1x into currentChristian Poessinger
* 'udev' of github.com:c-po/vyos-1x: usb: op-mode: T2560: display USB interface information pppoe: op-mode: T2488: retrieve log info from journalctl wwan: op-mode: T2488: retrieve log info from journalctl wwan: T2241: interface is not bond- or bridgeable wwan: T2488: remove generation of dedicated logfile wwan: T2529: migrate device from ttyUSB to usbXbY.YpZ.Z udev: T2490: add persistent USB device files
2020-06-07op-mode: T2558: fix hypervisor bug, add CPU info to "show version"kroy-the-rabbit
2020-06-07usb: op-mode: T2560: display USB interface informationChristian Poessinger
vyos@vyos:~$ show system usb /: Bus 03.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/2p, 480M |__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/4p, 480M |__ Port 3: Dev 4, If 0, Class=Vendor Specific Class, Driver=qcserial, 480M |__ Port 3: Dev 4, If 2, Class=Vendor Specific Class, Driver=qcserial, 480M |__ Port 3: Dev 4, If 3, Class=Vendor Specific Class, Driver=qcserial, 480M |__ Port 3: Dev 4, If 8, Class=Vendor Specific Class, Driver=qmi_wwan, 480M vyos@vyos:~$ show system usb serial No USB to serial converter connected vyos@vyos:~$ show system usb serial Device Model Vendor ------ ------ ------ usb0b1.3.3.4p1.0 Quad_RS232-HS Future Technology Devices International, Ltd usb0b1.3.3.4p1.1 Quad_RS232-HS Future Technology Devices International, Ltd usb0b1.3.3.4p1.2 Quad_RS232-HS Future Technology Devices International, Ltd usb0b1.3.3.4p1.3 Quad_RS232-HS Future Technology Devices International, Ltd usb0b1.3.4p1.0 Quad_RS232-HS Future Technology Devices International, Ltd usb0b1.3.4p1.1 Quad_RS232-HS Future Technology Devices International, Ltd usb0b1.3.4p1.2 Quad_RS232-HS Future Technology Devices International, Ltd usb0b1.3.4p1.3 Quad_RS232-HS Future Technology Devices International, Ltd usb0b1.3p1.0 MC7710 Sierra Wireless, Inc. usb0b1.3p1.2 MC7710 Sierra Wireless, Inc. usb0b1.3p1.3 MC7710 Sierra Wireless, Inc. usb0b1.4p1.0 Quad_RS232-HS Future Technology Devices International, Ltd usb0b1.4p1.1 Quad_RS232-HS Future Technology Devices International, Ltd usb0b1.4p1.2 Quad_RS232-HS Future Technology Devices International, Ltd usb0b1.4p1.3 Quad_RS232-HS Future Technology Devices International, Ltd
2020-06-07wwan: T2241: interface is not bond- or bridgeableChristian Poessinger
Commit 2cb806271928 ("wirelessmodem: T2241: make VRF and bond/bridge membership mutually exclusive") added some logic which is not forseen/neither makes sense on a dialup interface, thus it's removed again
2020-06-07wwan: T2488: remove generation of dedicated logfileChristian Poessinger
... all information are present in journald.
2020-06-07wwan: T2529: migrate device from ttyUSB to usbXbY.YpZ.ZChristian Poessinger
During testing it was discovered that there is a well known problem (we had for ethernet interfaces) also in the serial port world. They will be enumerated and mapped to /dev/ttyUSBxxx differently from boot to boot. This is especially painful on my development APU4 board which also has a Sierra Wireless MC7710 LTE module installed. The serial port will toggle between ttyUSB2 and ttyUSB5 depending on the amount of serial port extenders attached (FT4232H). The shipped udev rule (/usr/lib/udev/rules.d/60-serial.rules) partly solves this by enumerating the devices into /dev/serial/by-id folder with their name and serial number - it's a very good idea but I've found that not all of the FT4232H dongles have a serial number programmed - this leads to the situation that when you plug in two cables with both having serial number 0 - only one device symlink will appear - the previous one is always overwritten by the latter one. Derive /usr/lib/udev/rules.d/60-serial.rules and create a /dev/serial/by-bus directory and group devices by attached USB root port. vyos@vyos:~$ find /dev/serial/by-bus/ -name usb* -exec basename {} \; | sort usb0b1.3p1.0 usb0b1.3p1.2 usb0b1.3p1.3 usb0b2.4p1.0 usb0b2.4p1.1 usb0b2.4p1.2 usb0b2.4p1.3 So we have USB root 0 with bus 1.3 and port 1.0. The enumeration is constant accross reboots.
2020-06-07udev: T2490: add persistent USB device filesChristian Poessinger
During testing it was discovered that on 5 out of 10 reboots the USB enumeration/mapping from physical port to /dev/ttyUSB is different. The root cause is that it's a FIFO so first found/loaded driver module will be assigned ttyUSB0. This mixed up the serial interfaces of my FTDI chips and my connected Sierra Wireless MC7710 card which was no longer functioning as it now was mapped to a different USB interface. The solution is a udev rule which persistently maps the USB-tree-device to a device file in /dev. Wait? isn't this what /dev/serial/by-{id,path} is for? Correct, it does the very same thing but the problem is as follows: * by-path uses device file names which also incorporate the parent bus system, this results in "pci-0000:00:10.0-usb-0:2.4:1.0-port0" * by-id will overwrite the assigned device symlink if a new USB device with the same name appears. This happens to some FTDI devices with no serial number programmed so the device added last wins and will be the only one in the by-id folder - cruel world! This commit adds a new directory /dev/serial/by-bus which holds the following device files (as example): $ ls -1 /dev/serial/by-bus/ usb0b1.3p1.0 usb0b1.3p1.2 usb0b1.3p1.3 usb0b2.4p1.0 usb0b2.4p1.1 usb0b2.4p1.2 usb0b2.4p1.3
2020-06-07op-mode: version: remove unused import statementsChristian Poessinger
2020-06-06dhcpv6-pd: T2551: fix prefix length not set in configChristian Poessinger
Retrieving the CLI nodes from current config was missed out and only implemented for PPPoE.
2020-06-05dhcpv6-pd: T421: workaround for non existing interfacesChristian Poessinger
When DHCPv6-PD is configured to delegate a prefix to a non existing interface, it is restarted (systemd default) but will then hit the restart rate-limit which disables the service entirely. As VyOS currently has no "hook" to be called once an interface goes online we need this "try and error" approach until there is a way to deal with it. This behavior can be reproduced when delegating an IPv6 prefix to a bridge interface as a bridge interface will always be started after all interfaces have been configured. We will now restart dhcp6c as long as the requested interface is online.
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-30 16:33:05 +0000