Age | Commit message (Collapse) | Author |
|
(cherry picked from commit 456419c7930405b80d322586736734f707affaed)
|
|
openconnect: T4982: Support defining minimum TLS version in openconnect VPN (backport #3371)
|
|
Check if the wireless device/modem exists in the system and the
module `ieee802111` was loaded
In cases where we do not have wireless devices, it prevents the
unexpected traceback
```
set interfaces wireless wlan0 address 192.0.2.5/32
commit
Traceback (most recent call last):
File "/usr/libexec/vyos/conf_mode/interfaces_wireless.py", line 269, in <modu>
c = get_config()
^^^^^^^^^^^^
File "/usr/libexec/vyos/conf_mode/interfaces_wireless.py", line 104, in get_cg
tmp = find_other_stations(conf, base, wifi['ifname'])
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/usr/libexec/vyos/conf_mode/interfaces_wireless.py", line 54, in find_os
for phy in os.listdir('/sys/class/ieee80211'):
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
FileNotFoundError: [Errno 2] No such file or directory: '/sys/class/ieee80211'
```
(cherry picked from commit 09c302d7e57a0fdb6c51ae8f61d5ad6371a30b67)
|
|
(cherry picked from commit 9ff74d4370f0a5f66c303074796dab8b1ca5c4a5)
|
|
Throwing Warning message instead of Error if interface which is
used in pppoe/ipoe does not exist.
(cherry picked from commit af7277c7d525c22749bc236ad2096bec5c08d998)
|
|
(cherry picked from commit 9438f1f8394b7c90bb536292882571c88556ce87)
|
|
(cherry picked from commit 70e1df1b5fcb3b1791cca320ed45b71e01e1ffda)
|
|
qos: T4248: Allow to remove the only rule from the qos class (backport #3316)
|
|
The join addresses within the multicast group 224.0.0.0/24 are
reserved and cannot be joined
FRR
```
r4(config)# interface eth2
r4(config-if)# ip igmp join 224.0.0.0 224.0.0.10
% Configuration failed.
Error type: validation
Error description: Groups within 224.0.0.0/24 are reserved and cannot be joined
r4(config-if)#
```
Add verify check
(cherry picked from commit c8f9acf5d91827b0d1266d3061a5e15a82628323)
|
|
(cherry picked from commit da40bd2b2a826986de128354ea1bfc041ada0016)
|
|
Not all FRR address-families compatibe with VRF
```
r4# conf t
r4(config)# router bgp 65001 vrf bgp
r4(config-router)#
r4(config-router)# address-family ipv4 flowspec
Only Unicast/Multicast/EVPN SAFIs supported in non-core instances.
r4(config-router)#
r4(config-router)# address-family ipv4 labeled-unicast
Only Unicast/Multicast/EVPN SAFIs supported in non-core instances.
r4(config-router)#
r4(config-router)# address-family ipv4 vpn
Only Unicast/Multicast/EVPN SAFIs supported in non-core instances.
r4(config-router)#
```
Add verify AFI for VRF
(cherry picked from commit a3713cd64f2f43f321a5138db94bb1a87edbffdd)
|
|
This fix for bug when `sudo` commands were not send to the remote
syslog server. They stop before the directive that includes all
configurations `$IncludeConfig /etc/rsyslog.d/*.conf`
(cherry picked from commit 7164ad40f5cc47f35c7903626d4d4da048a25113)
|
|
The actual name of the script is `vyos-vrrp-conntracksync.sh`
(cherry picked from commit 7efe245f59bbea9f12d0c7c5a8975380efc6f2d5)
|
|
image-tools: T6260: remove persistence image directory if no space error (backport #3346)
|
|
(cherry picked from commit c2fc2dba32ba861684f5e34635f810c56d551d51)
|
|
Connect_disconnect: T6261: correction to typo in check_ppp_running function
Changes include:
1. Replaces "beeing" -> being in print statement for check_ppp_running
2. Replaces "can not" -> cannot in print statement on lines 61 and 93
(cherry picked from commit 19e0d3b74f66e082c3f131b9044e7ca2371b1d85)
|
|
(cherry picked from commit 31b21d26751b7db7ab784486da5b8690ddd4a058)
|
|
(cherry picked from commit 050f24770aec7a74c1a07ba64cf2cb83afb72f1a)
|
|
(cherry picked from commit a43f1c00bdc5047eb20840ebb274418362612526)
|
|
Fix for restoring default ip rule values after deleting VRF
Defult values:
```
$ ip rule
0: from all lookup local
32766: from all lookup main
32767: from all lookup default
```
After adding and deleting a VRF we get unexpected values:
```
$ ip rule
1000: from all lookup [l3mdev-table]
2000: from all lookup [l3mdev-table] unreachable
32765: from all lookup local
32766: from all lookup main
32767: from all lookup default
```
(cherry picked from commit ce0bc35f8b5ff80a7b8fbfdf1b9ccc10c5c254fd)
|
|
(cherry picked from commit a88b3bd344cc4a682d16681ef536c1d20e2c2c42)
|
|
(cherry picked from commit f43edbd7cd36f52a0cd9c475b53f317882f4a6f9)
|
|
T6242: load-balancing reverse-proxy: Ability for ssl backends to not verify server certificates (backport #3315)
|
|
onlink pretend that the nexthop is directly attached to this link,
even if it does not match any interface prefix.
Useful when gateway not in the same interface network
set interfaces ethernet eth0 vif 10 address '10.20.30.1/32'
set protocols static route 10.20.30.0/32 interface eth0.10
set protocols failover route 192.0.2.11/32 next-hop 10.20.30.0 onlink
```
vyos@r4# sudo ip route add 192.0.2.111/32 via 10.20.30.0 dev eth0.10 metric 1 proto failover
Error: Nexthop has invalid gateway.
[edit]
vyos@r4#
[edit]
vyos@r4# sudo ip route add 192.0.2.111/32 via 10.20.30.0 dev eth0.10 onlink metric 1 proto failover
[edit]
vyos@r4#
```
(cherry picked from commit bb832acb97881d747a57da2728eab3ad138b8129)
|
|
server certificates
(cherry picked from commit aafe22d08bb38a579dd5075fd27a1b88beeca791)
|
|
T5535: firewall: migrate command <set system ip disable-directed-broadcast> to firewall global-optinos (backport #3309)
|
|
(cherry picked from commit 9f9891a209957403dfa3ae9ec2cd56d8d9eedb86)
|
|
Check if DH is configured for OpenVPN but does not exist in the
PKI section
```
set pki dh dh-correct parameters 'xxxx'
set interfaces openvpn vtun10 tls dh-params 'dh-fake'
File "/usr/libexec/vyos/conf_mode/interfaces_openvpn.py", line 208, in verify_pki
pki_dh = pki['dh'][tls['dh_params']]
~~~~~~~~~^^^^^^^^^^^^^^^^^^
KeyError: 'dh-fake'
```
(cherry picked from commit 95cd743c24c6f7720af87450312fc111649db849)
|
|
to firewall global-optinos
(cherry picked from commit 76dcecafca977b640dd16d8e68c4a050ca1af4fb)
|
|
T5872: fix ipsec dhclient hook uses "exit" instead of "return" (backport #3302)
|
|
Added NAT migration from IP/Netmask to Network/Netmask.
In 1.3 allowed using IP/Netmask in Nat rules.
In 1.4 and 1.5 it is prohibited. Allowed Network/Netmask.
(cherry picked from commit 52c02ade031f165da18e6fd0542f3952f2cc9bb6)
|
|
(cherry picked from commit 840ab82e8821624aae589dec1ea86cefbcf866b7)
|
|
pppoe-server: T6141: T5364: PPPoE-server add pado-delay without sessions fails (backport #3296)
|
|
T6166: Tech support generation error for custom output location (backport #3242)
|
|
fails (#3296)
(cherry picked from commit 6d8336f5ad2d9c4e0f12b54681db2924d6998d2d)
|
|
errors when using character <+> in 1.3 in firewall groups and custom firewall chains.
(cherry picked from commit 36baf771b8ea52487bf6c913d2019f926acbc4f3)
|
|
(cherry picked from commit 6b5590ae3325320a2b6bbcb34086ddb178860160)
|
|
(cherry picked from commit 13ed4f9d489dd5b8ee80c5f2fdebf1b0565e9137)
|
|
(cherry picked from commit 619e2262e77621c6110164712fed0a42f16715e3)
|
|
There are cloud environments available where the maximum supported ethernet
MTU is e.g. 1450 bytes, thus we clamp this to the adapters maximum MTU value
or 1500 bytes - whatever is lower.
(cherry picked from commit 8296cc727066e739c178918a91cfc11d20d26fe1)
|
|
Commit 1b364428f ("login: T5875: restore home directory permissions only when
needed") added logic to chown the users home directory if it's UID changes.
This might happen when a user account is deleted and re-added to the system.
Under rar e circumstances it was possible that the implementation triggered
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
KeyError: 'getpwuid(): uid not found: XXXX'
This has been fixed by re-arranging the code path with an additional try/except
if the PW database information could not be retrieved leading to an implicit
chown() of the home directory to the user beeing added.
(cherry picked from commit 1165bb497ec2d6d1b3b12d6c03435b0210efe9e5)
|
|
ipoe: T6205: error in migration script logic while renaming mac-address to mac node (backport #3263)
|
|
'upper'
Commit b30faa43c (container: T6208: rename "cap-add" CLI node to "capability")
added an AttributeError referencing an out of scope variable.
This has been fixed.
(cherry picked from commit 2463bd292f14e46fdb26116791a89ca2eb651d17)
|
|
Commit a5ccc06c0 ("ipoe: T6205: error in migration script logic while renaming
mac-address to mac node") added a conditional path into the config which could
result in the migrated config not beeing written if precondition was not met.
(cherry picked from commit 2bbded1e485614d40b2e95165629487537fd1757)
|
|
Containers have the ability to add Linux system capabilities to them, this is
done using the "set container name <name> cap-add" command.
The CLI node sounds off and rather should be "set container name <name>
capability" instead as we use and pass a capability to a container and not
add/invent new ones.
(cherry picked from commit b30faa43c28b592febd83a7fd3a58247de6b27bc)
|
|
mac node
The problem was introduced in [1] but the config migrator part unfortunately
was added to the wrong version [2]. As IPoE config version 0 was only active
during the 1.3 development cycle and VyOS 1.3.0 was already released with config
version 1 we can safely drop the migrator 0-to-1 and move the code to 1-to-2 to
properly support upgrades from VyOS 1.3 -> 1.4 or newer.
1: https://github.com/vyos/vyos-1x/commit/05df2a5f021f0c7aab7c06db645d210858b6e98d#diff-08291bf77870abe3af8bbe3e8ce4bbf344fd0498b2c5c75a75aa7235d381c88eL168
2: https://github.com/vyos/vyos-1x/commit/05df2a5f021f0c7aab7c06db645d210858b6e98d#diff-b8bb58b75607d3653e74d82eff02442f9f3ab82698f160ba37858f7cdf6c79ccR44-R46
(cherry picked from commit a5ccc06c08d3a9696f1c03c8d0c7de78ce1fd3c5)
|
|
T6203: remove obsoleted xml lib (backport #3255)
|
|
T6188: add description to show firewall (backport #3219)
|
|
For readability in console sessions, moved the description column to only be shown in the detail view.
Changed wrapping in the detail view for description to 65 characters to prevent full line wrapping in console sessions.
(cherry picked from commit 4dba82c7517f4a93b9727d22104e4a339bad127a)
|
|
- modified: src/op_mode/firewall.py
Changed behavior of "show firewall" for specific rule to only show rule and not also default-action
(cherry picked from commit a7c5205ab12e767c6c60887033694c597e01f21b)
|