| Age | Commit message (Collapse) | Author |
|---|
|
|
|
|
|
|
|
graphql: T5106: extend generation of API client requests to configsession and composite requests
|
|
dns: T5113: Support custom port for name-server forwarders
|
|
Support custom port for name-server forwarders that would allow using
custom ports in name server forwarders to enable forwarding to
alternative name servers (unbound, stubby, dnscrypt-proxy etc.)
operating on non-default port.
This would also allow using DNS Over TLS in PowerDNS Recursor 4.6 onwards
(pdns doesn't support certificate check for validity yet) by enabling
'dot-to-port-853'. This is set by default if compiled in with DoT support.
See: https://doc.powerdns.com/recursor/settings.html#dot-to-port-853
This also partially implements T921, T2195 (DoT without certificate check).
Implementation details:
- In 'dns/forwarding' configuration, 'name-server' now allows optional
'port' (defaults to 53).
- Instead of modifying 'name-server-ipv4-ipv6.xml.i' to add optional
'port', a new file 'name-server-ipv4-ipv6-port.xml.i' has been used
to avoid impacting other places where it is reused because not all of
them honor ports (mostly VPN related).
- The `host:port` entries to be used by PowerDNS recursor config are
normalized eagerly at the point of loading VyOS `Config` instead of
doing them lazily while rendering the Jinja2 template to keep the
implementation less intrusive. The alternative would entail making
quite a bit of change in how 'vyos-hostsd' processes 'static'
'name_servers' entries or persists their runtime states.
|
|
'show interfaces counters' correctly displays counter stats after a call
to 'clear interfaces counters', however, 'show interfaces detail' does
not. Add missing update to counter stats.
|
|
T5099: IPoE-server add option next-pool for named ip pools
|
|
T5108: Add option rate-limit for l2tp pptp sstp ipoe raw format
|
|
There is a missing usefull option 'rate-limit' for
L2TP/PPTP/SSTP/IPoE raw output format
|
|
|
|
|
|
|
|
|
|
|
|
|
|
ipsec: T5043: Rewritten and fixed 'reset vpn' commands
|
|
|
|
In cases with multiple named IP pools, it is required the option 'next'
to be sure that if IP addresses ended in one pool, then they would
begin to be allocated from the next named pool.
For accel-ppp it requires specific order as pool must be defined
before we can use it with the 'next-option'
set service ipoe-server client-ip-pool name first-pool subnet '192.0.2.0/25'
set service ipoe-server client-ip-pool name first-pool next-pool 'second-pool'
set service ipoe-server client-ip-pool name second-pool subnet '203.0.113.0/25'
[ip-pool]
203.0.113.0/25,name=second-pool
192.0.2.0/25,name=first-pool,next=second-pool
|
|
T5050: Firewall: Add log options
|
|
|
|
openvpn: T5095: raw output should return list instead of dict
|
|
We drop default values 'port' but don't set it again per server
Fix it
|
|
T5091: IPoE-server verify RADIUS settings
|
|
|
|
1. Rewritten CLI of 'reset vpn' commands.
2. Created 'reset vpn ipsec remote-access' commands to reset
RA IKEv2 session.
3. Created 'reset vpn ipsec site-to-site all' command to reset all
configured IPSec site-to-site peers sessions.
4. Rewritten 'reset vpn l2t|pptp|sstp' commands to
new opmode style.
|
|
As we don't have global option 'gateway-address' for ipoe-server
we cannot use general configverify.verify_accel_ppp_base_service
Add verify radius setting for configuration mode 'radius'
Radius authentication required at least one RADIUS server
|
|
Add sFlow feature based on hsflowd
According to user reviews, it works more stable and more productive
than pmacct
I haven't deleted 'pmacct' 'system flow-accounting sflow' yet
It could be migrated or deprecated later
set system sflow agent-address '192.0.2.14'
set system sflow interface 'eth0'
set system sflow interface 'eth1'
set system sflow polling '30'
set system sflow sampling-rate '100'
set system sflow server 192.0.2.1 port '6343'
set system sflow server 192.0.2.11 port '6343'
|
|
Add template to generate zebra
"ipv6 protocol ospf6 route-map xxx"
|
|
Also ExecReload is a duplicate of the base service file
|
|
|
|
Container registry CLI node changed from leafNode to tagNode with the same
defaults. In addition we can now configure an authentication option per
registry.
|
|
graphql: T5068: generate client operations for code generation tools
|
|
With long lease time for example lease '4294967295' seconds
it is impossible to get end lease as value is 'ends never;'
It cause error to get timestamp() from 'ends never' and remaining
time 'lease.end - datetime.utcnow()'
Set default remaining and end lease to '-' if we cannot get this
info
|
|
|
|
This will check if mirror/redirect is present on a QoS interface and use `vyos.configdep` module to update the interface again after QoS is applied.
|
|
IPoE-server 'interface ethX vlan xxx' (aka vlan-mon) must not be
used with 'interface ethX client-subnet'
So instead of shared pool accel-ppp uses the same pool for each
dynamically added VLAN
eth1 client-subnet '192.0.2.0/24'
eth1 vlan '2000-2021'
It cause this issue:
eth1.2000 range 192.0.2.0/24 (the first client gets address from 192.0.2.2)
eth2.2001 range 192.0.2.0/24 (the first client gets address from 192.0.2.2)
Only named pools with vlan option must be used.
|
|
|
|
|
|
Lift the amount of allowed open file descriptors for the FRR process tree.
Required if there are hundreds to thousands interfaces on a system.
|
|
|
|
|
|
graphql: T5040: generate schema on installation, rather than dynamically
|
|
|
|
ipsec: T4916: Fixed migrations script
|
|
* removed unused `re` from imports
* replaced `return_value()` to `return_values()` for `remote-address`
because this is a multi-value configuration node
|
|
|
|
|
|
Schema had been dynamically generated, based on configuration setting
for authentication. Add nullable field 'key' for static generation of
schema regardless of key/token use.
|
|
T5037: Firewall: Add queue action and options to firewall
|
