Age | Commit message (Collapse) | Author |
|
|
|
Not supported with swanctl
|
|
|
|
Fixed 'reset vpn ipsec-peer {peer}' command.
The op-mode script uses value 'None' in the 'tunnel' parameter
to clear all CHILD SAs.
|
|
Replace links to the phabricator site from https://phabricator.vyos.net to
https://vyos.dev
|
|
tc acccepts the bandwidth value/unit pairs as lowercase - so does the VyOS CLI
validator work, too.
|
|
T4857: snmp: Fix error when not defining client|network under community
|
|
After the RESTRICTED view was introduced snmpd requires a network to be
specified. Before adding the RESTRICTED view snmpd always assumed the default
network 0.0.0.0/0.
This commit re-adds the build in default networks for IPv4 and IPv6 and
exposes it as a proper default to the CLI so the user is informed about it:
vyos@vyos# set service snmp community foooo
Possible completions:
authorization Authorization type (default: ro)
+ client IP address of SNMP client allowed to contact system
+ network Subnet of SNMP client(s) allowed to contact system (default:
0.0.0.0/0, ::/0)
|
|
sstp-client
|
|
nhrp: T4905: Rewritten nhrp op-mode in new style
|
|
containers"
This reverts commit b17251334c57c2f6875c19ad4e6c6127aa9e1811.
|
|
container: T4959: Add container registry authentication config for containers
|
|
|
|
|
|
T2408: dhcp-relay: Add listen-interface and upstream-interface feature
|
|
When shaper is bound to a dialup (e.g. PPPoE) interface it is possible, that
it is yet not availbale when to QoS code runs. Skip the configuration and
inform the user.
|
|
bgp: T4817: add support for RFC9234
|
|
This reverts commit 3a6e77d479da4321b851163490a9b79ef2cef7b8.
A general solution is implemented in Commit 29a44a73 ("T4975: always sync()
filesystem after commit").
|
|
|
|
|
|
User profile files are not saved to disk after configuration is fully applied.
Because of this, after a fast system reset, profile files can be empty, and CLI
is broken.
This fix adds a `sync()` call after the user's configuration, which should
protect from data loss and fix the problem with profiles.
|
|
1. Formatted output of 'show nhrp' commands to table view
2. Rewritten nhrp op-mode in new style
|
|
|
|
T4916: Rewrite IPsec peer authentication and psk migration
|
|
|
|
Removes port key from accounting server merged config dictionary.
|
|
|
|
Adds CLI configuration options to configure RADIUS accounting for OpenConnect VPN sessions. This functionality cannot be used outside of the RADIUS OpenConnect VPN authentication mode
|
|
openconnect: T4955: Removed wrong authserver in radiusclient.conf
|
|
This sysctl has been removed from kernel 6.0.X onwards but its removal was skipped when upgrading the kernel.
See: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/net/netfilter?id=b118509076b39cc5e616c0680312b5caaca535fe
|
|
config.copy does not recursively create nodes of the path. On install
image, the path ['service'] is not present in config.boot.default, so
must be created before config.copy['service', 'ntp'].
|
|
After merging config dictionary with default values, radius port
the default value was merged not in a proper way.
It is added as a server.
After creating radiusclient.conf added and the illegal authserver
equal 'port'.
|
|
Rewrite strongswan IPsec authentication to reflect structure
from swanctl.conf
The most important change is that more than one local/remote ID in the
same auth entry should be allowed
replace: 'ipsec site-to-site peer <tag> authentication pre-shared-secret xxx'
=> 'ipsec authentication psk <tag> secret xxx'
set vpn ipsec authentication psk <tag> id '192.0.2.1'
set vpn ipsec authentication psk <tag> id '192.0.2.2'
set vpn ipsec authentication psk <tag> secret 'xxx'
set vpn ipsec site-to-site peer <tag> authentication local-id '192.0.2.1'
set vpn ipsec site-to-site peer <tag> authentication mode 'pre-shared-secret'
set vpn ipsec site-to-site peer <tag> authentication remote-id '192.0.2.2'
Add template filter for Jinja2 'generate_uuid4'
|
|
T1297: VRRP: add garp options to vrrp
|
|
|
|
make the file (generate_interfaces_debug_archive.py
) executable
|
|
Commit b5e90197 ("op mode: T4951: add InsufficientResources error") missed out
a comma when extending the op_mode_err_msg dictionary.
|
|
igmp-proxy: T4912: Rewrite show IGMP proxy commands in the new op-mode format
|
|
T4940: new interfaces debugging command
|
|
op mode: T4951: add InsufficientResources error
|
|
|
|
|
|
|
|
Some ISPs seem to use the host-uniq flag to authenticate client equipment.
Add CLI option in VyOS to allow specification of the host-uniq flag.
set interfaces pppoe pppoeN host-uniq <value>
|
|
One can not always ensure that "interface" is of type list, add safeguard.
E.G. Juniper Networks, Inc. ex2300-c-12t only has a dict, not a list of dicts
So this is actually an upstream lldpd bug where the output depends on the amount
of data transmitted.
|
|
Whenever a container is used and a folder is mounted, this happenes as
read-write which is the default in Docker/Podman - so is the default in VyOS.
A new option is added "set container name foo volume mode <ro|rw>" to specify
explicitly if rw (default) or ro should be used for this mounted folder.
|
|
|
|
One can not always ensure that "capability" is of type list, add a safeguard.
E.G. Unify US-24-250W only has a dict, not a list of dicts.
|
|
config-mgmt: T4942: rewrite vyatta-config-mgmt to Python/XML
|
|
|