summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2023-12-29vyos.template: T5869: first_host_address() does not honor RFC4291 section 2.6.1Christian Breunig
The subnet router anycast address is predefined. Its format is as follows: | n bits | 128-n bits | +------------------------------------------------+----------------+ | subnet prefix | 00000000000000 | +------------------------------------------------+----------------+ The "subnet prefix" in an anycast address is the prefix that identifies a specific link. This anycast address is syntactically the same as a unicast address for an interface on the link with the interface identifier set to zero. Packets sent to the Subnet-Router anycast address will be delivered to one router on the subnet. All routers are required to support the Subnet-Router anycast addresses for the subnets to which they have interfaces. The Subnet-Router anycast address is intended to be used for applications where a node needs to communicate with any one of the set of routers. Our code as of now returns the subnet router anycast address as the first_host_address(). (cherry picked from commit cc4ce81ece57faca8ce111b8f3748389ecb40202)
2023-12-29nat: T5681: relax wording on non existing interface Warning messageChristian Breunig
Remove the word "error" from a Warning only message to not irritate the user. (cherry picked from commit 9f863a50f1ac6c81782df6c43f7df816d9e11b16)
2023-12-28Merge pull request #2697 from c-po/sagitta-T5829Daniil Baturin
container: T5829: verify container network used supports the given AFI (backport)
2023-12-28Merge pull request #2700 from vyos/mergify/bp/sagitta/pr-2501Daniil Baturin
accel-ppp: T5688: Standardized pool configuration in accel-ppp (backport #2501)
2023-12-28container: T5867: disable healthchecks due to upstream issueChristian Breunig
conmon 402de34b31388b5a2e1c <error>: Unable to send container stderr message to parent Broken pipe https://github.com/containers/conmon/issues/438 (cherry picked from commit 6c84ff41b92d7c2e0b239dca59955e8a247fecdb)
2023-12-28accel-ppp: T5688: Fixed migration script for pppoe-serveraapostoliuk
Fixed migration script for pppoe-server (cherry picked from commit 17722f3ee1151d2e4ccf23655f7079615bf61e24)
2023-12-28accel-ppp: T5688: Standardized pool configuration in accel-pppaapostoliuk
Standardized pool configuration for all accel-ppp services. 1. Only named pools are used now. 2. Allows all services to use range in x.x.x.x/mask and x.x.x.x-x.x.x.y format 3. next-pool can be used in all services 2. Allows to use in ipoe gw-ip-address without pool configuration which allows to use Fraimed-IP-Address attribute by radius. 3. Default pool name should be explicidly configured with default-pool. 4. In ipoe netmask and range subnet can be different. (cherry picked from commit 422eb463d413da812eabc28706e507a9910d7b53)
2023-12-28container: T5829: fix base key "container" re-use in for loopChristian Breunig
(cherry picked from commit 405cc66041d8035500f7b7116301983c48464a9b)
2023-12-28container: T5829: verify container network used supports the given AFIChristian Breunig
(cherry picked from commit e70ca62c474b4e2cc135851a6e5cceee037bf378)
2023-12-26ddclient: T5144: Warn against configuration with broken IP lookup serviceIndrajit Raychaudhuri
We always enable HTTPS in ddclient configuration, however `http://checkip.dyndns.org` is HTTP only and does not support HTTPS. Warn the user if they are using this service. Also, make `url` in `web-options` mandatory.
2023-12-26ddclient: T5144: Migrate web-options url to stricter formatIndrajit Raychaudhuri
Legacy ddclient allowed arbitrary URLs in web-options, but the new has stricter validations. Apply migration to the old URLs. Also migrate checkip.dyndns.org to https://domains.google.com/checkip for better TLS support.
2023-12-26ddclient: T5144: Fix migration to avoid config name conflictIndrajit Raychaudhuri
When migrating from `service dns dynamic interface <interface> ...` to `service dns dynamic address <address> ...`, the config name can potentially have a conflict when `address == 'web'`. Although the `/run/ddclient/ddclient.conf` that was generated earlier was incorrect, one could still potentially have misconfigured VyOS config without realizing it. We now append the old <interface> name to the config name to avoid conflict.
2023-12-26ddclient: T5791: Fix migration to normalize config name and avoid configIndrajit Raychaudhuri
Since `service dns dynamic address <address> service <service> ...` changed to `service dns dynamic name <service> address <address> ...`, the resulting service and address config flip can result in conflicting `service` name. Additionally, since dynamic DNS service name now have name constraint, we need to normalize the service name to conform with the constraint. We now migrate the service name to (service|rfc2136)-<service>-<address> to avoid the conflict and optionally append an index if there is still a name conflict after normalization.
2023-12-26ddclient: T5791: Adjust the warning messages and minor refactoringIndrajit Raychaudhuri
2023-12-25snmp: T5855: migrate "set service lldp snmp enable" to "set service lldp snmp"Christian Breunig
(cherry picked from commit a9201e77110ce0695e2ba879304aef41b7ac9a0c)
2023-12-25snmp: T5855: add GPL license headerChristian Breunig
(cherry picked from commit 2490f22408ad811ff9f63ec970d0167ecbf4ab59)
2023-12-24T5837: cleanup use of calls to vyos.configdict.node_changed()Christian Breunig
node_changed() will return a list of changed keys under "path". We are not always interested what changed, sometimes we are only interested if something changed at all, that what vyos.configdict.is_node_changed() is for. (cherry picked from commit 5e7a8288d06a6d6beee5e1abd2e06698ab778650)
2023-12-24snmp: 5856: fix service removal errorChristian Breunig
When deleting SNMP from CLI the 'delete' key was not honored in the config dictionary, leading to a false process startup causing the following error: Job for snmpd.service failed because the control process exited with error code. See "systemctl status snmpd.service" and "journalctl -xeu snmpd.service" for details. (cherry picked from commit 20b98e780fda4131eb242921884d4955147ce51a)
2023-12-24T160: NAT64 add match firewall mark featureViacheslav Hletenko
Match mark allows to use firewall marks of packet to use a specific pool Example of instance config /run/jool/instance-100.json ``` ... "pool4": [ { "protocol": "TCP", "prefix": "192.0.2.10", "port range": "1-65535", "mark": 23 }, ... ``` (cherry picked from commit 8e1e79cfa24c155c8d504822fbbd3c20f890fb70)
2023-12-21Merge pull request #2675 from c-po/nat66-fix-sagittaDaniil Baturin
nat66: T2898: build fix after ndp-proxy backport
2023-12-21nat66: T2898: build fix after ndp-proxy backportChristian Breunig
2023-12-21Merge pull request #2673 from vyos/mergify/bp/sagitta/pr-2665Christian Breunig
T2898: add ndp-proxy service (backport #2665)
2023-12-21T2898: add ndp-proxy serviceChristian Breunig
VyOS CLI command set service ndp-proxy interface eth0 prefix 2001:db8::/64 mode 'static' Will generate the following NDP proxy configuration $ cat /run/ndppd/ndppd.conf # autogenerated by service_ndp-proxy.py # This tells 'ndppd' how often to reload the route file /proc/net/ipv6_route route-ttl 30000 # This sets up a listener, that will listen for any Neighbor Solicitation # messages, and respond to them according to a set of rules proxy eth0 { # Turn on or off the router flag for Neighbor Advertisements router no # Control how long to wait for a Neighbor Advertisment message before invalidating the entry (milliseconds) timeout 500 # Control how long a valid or invalid entry remains in the cache (milliseconds) ttl 30000 # This is a rule that the target address is to match against. If no netmask # is provided, /128 is assumed. You may have several rule sections, and the # addresses may or may not overlap. rule 2001:db8::/64 { static } } (cherry picked from commit 4d721a58020971d00ab854c37b68e88359999f9c)
2023-12-21srv6: T591: enable SR enabled packet processing on defined interfacesChristian Breunig
The Linux Kernel needs to be told if IPv6 SR enabled packets whether should be processed or not. This is done using /proc/sys/net/conf/<iface>/seg6_* variables: seg6_enabled - BOOL Accept or drop SR-enabled IPv6 packets on this interface. Relevant packets are those with SRH present and DA = local. 0 - disabled (default) not 0 - enabled Or the VyOS CLI command: * set protocols segment-routing interface eth0 srv6 (cherry picked from commit 774cc97eda61eb0b91df820797fb3c705d0073d5)
2023-12-21vrf: T591: define sysctl setting for net.vrf.strict_modeChristian Breunig
Enable/Disable VRF strict mode, when net.vrf.strict_mode=0 (default) it is possible to associate multiple VRF devices to the same table. Conversely, when net.vrf.strict_mode=1 a table can be associated to a single VRF device. A VRF table can be used by the VyOS CLI only once (ensured by verify()), this simply adds an additional Kernel safety net, but a requirement for IPv6 segment routing headers. (cherry picked from commit 10701108fecb36f7be7eb7ef5f1e54e63da5fb4e)
2023-12-21T5804: nat: remove inbound|outbound interface from old configuration when it ↵Nicolas Fort
was set to <any>. (cherry picked from commit 5cb95aed965b45a900c6ba97c0bccefed83332b6)
2023-12-21dhcp: T5846: Refactor and simplify DUID definitionIndrajit Raychaudhuri
Refactor DUID XML definition in conf-mode to be reusable. Additionally, remove explicit call to a separate validator `ipv6-duid` and inline the regex into the XML definition. (cherry picked from commit 51e7832fc5c88f9956b26157a80947bad4495a4e)
2023-12-20https api: T5844: allow the server to start without API keysDaniil Baturin
and use only PAM auth and JWT (cherry picked from commit 495bf4732439ebd55edfbf6050af8b2064993d86)
2023-12-20https api: T5844: issue a warning about the classic API unavailabilityDaniil Baturin
when no API keys are set (cherry picked from commit 7bad0e115ecc25224a0c3a2720a2697442624229)
2023-12-20T5798: load-balancing revese-proxy add multiple SSL certificatesViacheslav Hletenko
Add ability to configure multiple SSL certificates for frontend/service set load-balancing reverse-proxy service web mode http set load-balancing reverse-proxy service web port 443 set load-balancing reverse-proxy service web ssl certificate cert1 set load-balancing reverse-proxy service web ssl certificate cert2 (cherry picked from commit fe99c45e05fd5794905145ddca80e6078145c2e8)
2023-12-19T5823: Add recursive_defaults for BGP get_config dictionaryViacheslav Hletenko
Add recursive_defaults values for BGP "get_config" dictionary. (cherry picked from commit 4d5445740a1529691594263af22f2a9d07bbfe70)
2023-12-18T4163: Add BGP Monitoring Protocol BMP featureViacheslav Hletenko
Add BMP feature. BMP (BGP Monitoring Protocol, RFC 7854) is used to send monitoring data from BGP routers to network management entities https://docs.frrouting.org/en/latest/bmp.html Example: set system frr bmp commit run restart bgp set protocols bgp system-as '65001' set protocols bgp neighbor 192.0.2.11 address-family ipv4-unicast set protocols bgp neighbor 192.0.2.11 remote-as '65001' set protocols bgp bmp mirror-buffer-limit '256000000' set protocols bgp bmp target foo address '127.0.0.1' set protocols bgp bmp target foo port '5000' set protocols bgp bmp target foo min-retry '1000' set protocols bgp bmp target foo max-retry '2000' set protocols bgp bmp target foo mirror set protocols bgp bmp target foo monitor ipv4-unicast post-policy set protocols bgp bmp target foo monitor ipv4-unicast pre-policy set protocols bgp bmp target foo monitor ipv6-unicast post-policy set protocols bgp bmp target foo monitor ipv6-unicast pre-policy (cherry picked from commit 5523fccf4f7d05444c36c568128e94cd7b08c34f)
2023-12-16image-tools: T5825: restore authentication for add system imageJohn Estabrook
(cherry picked from commit 7ee9297a90625609e568394c9f5ea63e8c95a54b)
2023-12-16T5827: moved sys image sort to grub version_listTrae Santiago
(cherry picked from commit d01aba1f5055cdaa43c8429a2c13580679ec12f7)
2023-12-16T5827: made show system image alphabeticalTrae Santiago
(cherry picked from commit d2b29be237b790bb1a258647adf30c8b96c0b526)
2023-12-16T5827: made show system image alphabeticalTrae Santiago
(cherry picked from commit 2f8b22685065f25183133431502322decede6371)
2023-12-16image-tools: T5821: restore vrf-aware add system imageJohn Estabrook
(cherry picked from commit 90f2d9865051b00290dd5b7328a046e823b658dc)
2023-12-16image-tools: T5806: deactive raid arraysJohn Estabrook
(cherry picked from commit e3cd779d0bd8dd8be6231c7b2028326a03e6a06c)
2023-12-16image-tools: T5819: do not echo password on image installJohn Estabrook
(cherry picked from commit cf83979636c686a459d6dc75dcd98e342c70b1b3)
2023-12-16image-tools: T5758: restore saving previous data on installJohn Estabrook
Restore scanning previous installations for config data and ssh host keys on install. (cherry picked from commit 32551842bb0f710f590e8c030395a3a7902aa1df)
2023-12-16image-tools: T5789: copy ssh host keys on image updateJohn Estabrook
(cherry picked from commit 393b3ccf02902e765bd5cf603d770ba8cad22e75)
2023-12-16image-tools: T5751: restore arg raise_error for non-interactive useJohn Estabrook
(cherry picked from commit 35f69340ef189e27b380074bb687ad58f29e9433)
2023-12-16image-tools: T5751: add arg no_prompt for non-interactive callsJohn Estabrook
(cherry picked from commit 0fae5b412a359874f1d61a5330064e87a7e6b899)
2023-12-16image-tools: T5751: normalize args using hyphen instead of underscoreJohn Estabrook
(cherry picked from commit bb578a1cab177e8cee6e4d02144d21387ba13a93)
2023-12-16image-tools: T4516: exit grub-update service if running in dockerJohn Estabrook
(cherry picked from commit 0b97bde2cb04cf5e23350798f972abcee4bfe4ee)
2023-12-16image: T4516: add raid-1 install supportJohn Estabrook
(cherry picked from commit e036f783bc85e4d2bad5f5cbfd688a03a352223e)
2023-12-16image: T4516: ensure compatibility with legacy RAID 1 installsJohn Estabrook
(cherry picked from commit bd701768796d6ebb03ca943faf96d1dbea030edd)
2023-12-16image: T4516: variable name spellingJohn Estabrook
(cherry picked from commit fc5dc00a3892fa26d03213854ea5091d6b0c2c18)
2023-12-16image: T4516: restore select entry to set/delete imageJohn Estabrook
(cherry picked from commit 9ffa3e82d951756696367578dd5e82ef0f690065)
2023-12-16image: T4516: do not prompt for confirmation when setting defaultJohn Estabrook
(cherry picked from commit 3d15cfd484e8c2732d9f10e4065f2282f1f5d334)
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-30 17:10:45 +0000