Age | Commit message (Collapse) | Author |
|
|
|
bgp: T6189: L3VPN connectivity is broken after re-enabling VRF
|
|
After e7bb65894 ("vrf: T6189: render FRR L3VNI configuration when creating VRF
instance") we need to ensure that the VRF L3VNI configuration is removed in FRR
prior to removing the BGP VRF instance.
The reason is [1] where FRR only allows VRF BGP instance to be removed when
there is NO VNI configured anymore.
1: https://github.com/FRRouting/frr/blob/064c3494527b9e84260410006768ed38e57e1de7/bgpd/bgp_vty.c#L1646-L1650
|
|
When adding and removing VRF instances on the fly it was noticed that the vni
statement under the VRF instance in FRR vanishes. This was caused by a race
condition which was previously designed to fix another bug.
The wierd design of a Python helper below the VRF tree to only generate the
VNI configuration nodes is now gone and all is rendered in the proper place.
|
|
pppoe-server: T6234: PPPoE-server pado-delay refactoring
|
|
T6287: Config-sync add the ability to configure API port
|
|
We have several config XML definitions that use the same python3
script `system_host-name.py`
https://github.com/vyos/vyos-1x/blob/current/interface-definitions/system_name-server.xml.in
https://github.com/vyos/vyos-1x/blob/current/interface-definitions/system_host-name.xml.in
https://github.com/vyos/vyos-1x/blob/current/interface-definitions/system_static-host-mapping.xml.in
https://github.com/vyos/vyos-1x/blob/current/interface-definitions/system_domain-name.xml.in
https://github.com/vyos/vyos-1x/blob/current/interface-definitions/system_domain-search.xml.in
Any change in these scripts calls to restart the `service snmpd`
The service `snmpd` should be restarted only if `host-name` or
`domain-name` was changed.
It is a good idea to rewrite it to `get_config_dict` in the future.
|
|
firewall: T6257: Show member information for dynamic groups in op-mode
|
|
Add the ability to configure the API port if the API on the secondary
server works on a non-default port.
The primary node will connect to configured port for config-sync
```
set service config-sync secondary address '192.0.2.11'
set service config-sync secondary port '8443'
```
|
|
T6267: Check interface wireless module before apply config
|
|
openconnect: T4982: Support defining minimum TLS version in openconnect VPN
|
|
Check if the wireless device/modem exists in the system and the
module `ieee802111` was loaded
In cases where we do not have wireless devices, it prevents the
unexpected traceback
```
set interfaces wireless wlan0 address 192.0.2.5/32
commit
Traceback (most recent call last):
File "/usr/libexec/vyos/conf_mode/interfaces_wireless.py", line 269, in <modu>
c = get_config()
^^^^^^^^^^^^
File "/usr/libexec/vyos/conf_mode/interfaces_wireless.py", line 104, in get_cg
tmp = find_other_stations(conf, base, wifi['ifname'])
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/usr/libexec/vyos/conf_mode/interfaces_wireless.py", line 54, in find_os
for phy in os.listdir('/sys/class/ieee80211'):
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
FileNotFoundError: [Errno 2] No such file or directory: '/sys/class/ieee80211'
```
|
|
|
|
Throwing Warning message instead of Error if interface which is
used in pppoe/ipoe does not exist.
|
|
|
|
|
|
T6263: Groups 224.0.0.0/24 are reserved and cannot be joined
|
|
qos: T4248: Allow to remove the only rule from the qos class
|
|
|
|
The join addresses within the multicast group 224.0.0.0/24 are
reserved and cannot be joined
FRR
```
r4(config)# interface eth2
r4(config-if)# ip igmp join 224.0.0.0 224.0.0.10
% Configuration failed.
Error type: validation
Error description: Groups within 224.0.0.0/24 are reserved and cannot be joined
r4(config-if)#
```
Add verify check
|
|
Not all FRR address-families compatibe with VRF
```
r4# conf t
r4(config)# router bgp 65001 vrf bgp
r4(config-router)#
r4(config-router)# address-family ipv4 flowspec
Only Unicast/Multicast/EVPN SAFIs supported in non-core instances.
r4(config-router)#
r4(config-router)# address-family ipv4 labeled-unicast
Only Unicast/Multicast/EVPN SAFIs supported in non-core instances.
r4(config-router)#
r4(config-router)# address-family ipv4 vpn
Only Unicast/Multicast/EVPN SAFIs supported in non-core instances.
r4(config-router)#
```
Add verify AFI for VRF
|
|
PKI: T6259: Support RFC822 names in certificate generation
|
|
T6217: Conntrack-sync change the actual name of the script
|
|
This fix for bug when `sudo` commands were not send to the remote
syslog server. They stop before the directive that includes all
configurations `$IncludeConfig /etc/rsyslog.d/*.conf`
|
|
The actual name of the script is `vyos-vrrp-conntracksync.sh`
|
|
image-tools: T6260: remove persistence image directory if no space error
|
|
Connect_disconnect: T6261: correction to typo in check_ppp_running function
Changes include:
1. Replaces "beeing" -> being in print statement for check_ppp_running
2. Replaces "can not" -> cannot in print statement on lines 61 and 93
|
|
ntp: T4909: Rewrite NTP op mode in new format
Adapts ntp.xml.in to reference new ntp.py file
Add ntp.py
Adds a check to ntp.py to verify if the ntp service is configured
Adds raw mode to ntp.py
For raw output, replaces the original method of parsing the command line output FROM re.split+regex TO csv.reader.
Separates chrony commands into equivalent functions show_tracking, show_sources, source_sourcestats and show_activity
Revises the names of raw dictionary keys variables to be lowercase
Corrects a comment typo and renames function name used for raw mode
|
|
|
|
|
|
vyos.utils: T6244: add whitespace after time unit in uptime
|
|
$ touch /tmp/vyos.smoketest.debug
will enable dynamic debugging of the smoketests - showing the appropriate CLI
commands on stdout
|
|
|
|
|
|
|
|
T6221: Return default ip rule values after deleting VRF
|
|
|
|
Fix for restoring default ip rule values after deleting VRF
Defult values:
```
$ ip rule
0: from all lookup local
32766: from all lookup main
32767: from all lookup default
```
After adding and deleting a VRF we get unexpected values:
```
$ ip rule
1000: from all lookup [l3mdev-table]
2000: from all lookup [l3mdev-table] unreachable
32765: from all lookup local
32766: from all lookup main
32767: from all lookup default
```
|
|
|
|
T5722: Failover route add option onlink
|
|
T6242: load-balancing reverse-proxy: Ability for ssl backends to not verify server certificates
|
|
|
|
server certificates
|
|
pki: T6241: Fix dependency updates on PKI changes
|
|
onlink pretend that the nexthop is directly attached to this link,
even if it does not match any interface prefix.
Useful when gateway not in the same interface network
set interfaces ethernet eth0 vif 10 address '10.20.30.1/32'
set protocols static route 10.20.30.0/32 interface eth0.10
set protocols failover route 192.0.2.11/32 next-hop 10.20.30.0 onlink
```
vyos@r4# sudo ip route add 192.0.2.111/32 via 10.20.30.0 dev eth0.10 metric 1 proto failover
Error: Nexthop has invalid gateway.
[edit]
vyos@r4#
[edit]
vyos@r4# sudo ip route add 192.0.2.111/32 via 10.20.30.0 dev eth0.10 onlink metric 1 proto failover
[edit]
vyos@r4#
```
|
|
T5535: firewall: migrate command <set system ip disable-directed-broadcast> to firewall global-optinos
|
|
|
|
to firewall global-optinos
|
|
Check if DH is configured for OpenVPN but does not exist in the
PKI section
```
set pki dh dh-correct parameters 'xxxx'
set interfaces openvpn vtun10 tls dh-params 'dh-fake'
File "/usr/libexec/vyos/conf_mode/interfaces_openvpn.py", line 208, in verify_pki
pki_dh = pki['dh'][tls['dh_params']]
~~~~~~~~~^^^^^^^^^^^^^^^^^^
KeyError: 'dh-fake'
```
|
|
T6100: Added NAT migration from IP/Netmask to Network/Netmask
|