summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2024-03-28op-mode: T6175: "renew dhcp interface <name>" does not check for DHCP interfaceChristian Breunig
The current op-mode script simply calls sudo systemctl restart "dhclient@$4.service" with no additional information about a client interface at all. This results in useless dhclient processes root 47812 4.7 0.0 5848 3584 ? Ss 00:30 0:00 /sbin/dhclient -4 -d root 48121 0.0 0.0 4188 3072 ? S 00:30 0:00 \_ /bin/sh /sbin/dhclient-script root 48148 50.0 0.2 18776 11264 ? R 00:30 0:00 \_ python3 - Which also assign client leases to all local interfaces, if we receive one valid DHCPOFFER vyos@vyos:~$ show interfaces Codes: S - State, L - Link, u - Up, D - Down, A - Admin Down Interface IP Address MAC VRF MTU S/L Description ----------- ----------------- ----------------- ------- ----- ----- ------------- eth0 - 00:50:56:bf:c5:6d default 1500 u/u eth0.10 172.16.33.102/24 00:50:56:bf:c5:6d default 1500 u/u eth1 172.16.33.131/24 00:50:56:b3:38:c5 default 1500 u/u 172.16.33.102/24 and 172.16.33.131/24 are stray DHCP addresses. This commit moved the renew command to the DHCP op-mode script to properly validate if the interface we request a renew for, has actually a dhcp address configured. In additional this exposes the renew feature to the API. (cherry picked from commit 7dbaa25a199a781aaa9f269741547e576410cb11)
2024-03-28dhcp-server: T4718: Listen-address is not commit if the ip address is on the ↵khramshinr
interface with vrf
2024-03-26bgp: T6106: fix test and verify()khramshinr
(cherry picked from commit 2ba435fa4bc8a5c9b2285fb9215ebc582bfb5fdf)
2024-03-25config-sync: T6145: batch section requests for commit by priorityJohn Estabrook
(cherry picked from commit 50e9364575481335520f50dac834c74ef02ccfab)
2024-03-24ospf: T6066: can not define the same network in different areasChristian Breunig
Users can not (FRR fails) commit the same network belonging to different OSPF areas. Add verify() check to prevent this. (cherry picked from commit c6d8d9c012da1a7566eec2dff70385457f073e64)
2024-03-24grub: T6165: increase service TimeoutSec from 5 -> 60Christian Breunig
The PCEngines APU2 systems with mSATA disks tend to be very slow. This results in a service startup error: $ systemctl status vyos-grub-update × vyos-grub-update.service - Update GRUB loader configuration structure Loaded: loaded (/lib/systemd/system/vyos-grub-update.service; enabled; preset: enabled) Active: failed (Result: timeout) since Sun 2024-03-24 08:48:10 UTC; 14min ago Main PID: 779 (code=killed, signal=TERM) CPU: 869ms Mar 24 08:48:05 LR4.wue3 systemd[1]: Starting vyos-grub-update.service - Update GRUB loader configuration structure... Mar 24 08:48:10 LR4.wue3 systemd[1]: vyos-grub-update.service: start operation timed out. Terminating. Mar 24 08:48:10 LR4.wue3 systemd[1]: vyos-grub-update.service: Main process exited, code=killed, status=15/TERM Mar 24 08:48:10 LR4.wue3 systemd[1]: vyos-grub-update.service: Failed with result 'timeout'. Mar 24 08:48:10 LR4.wue3 systemd[1]: Failed to start vyos-grub-update.service - Update GRUB loader configuration structure. Measunring on an APU2 system after boot and memory is "hot", it still needs almost 17 seconds to complete the job cpo@LR4.wue3:~$ time sudo /usr/libexec/vyos/system/grub_update.py real 0m16.803s user 0m0.018s sys 0m0.028s (cherry picked from commit 5a12645cb25fb23f2195db1e2e977a69d0788d01)
2024-03-24Merge pull request #3163 from vyos/mergify/bp/sagitta/pr-3157Viacheslav Hletenko
vti: T6085: bring VTI interfaces up only when the IPsec tunnel is up (backport #3157)
2024-03-23Merge pull request #3162 from HollyGurza/T5164-sagittaChristian Breunig
dhcp: T5164: op cmd: "show dhcp server leases state" with available o…
2024-03-22isis: T6160: NameError: name 'process' is not definedChristian Breunig
This is a leftover after commit 0e050cb35 (isis: T3417: drop artificial "domain" node identifying the IS-IS process name). Drop all references to "process" variable. Specifying: set protocols isis interface eth1 set protocols isis net '49.0001.1921.6825.5255.00' set protocols isis redistribute ipv4 bgp Triggered an exception Traceback (most recent call last): File "/usr/libexec/vyos/conf_mode/protocols_isis.py", line 309, in <module> verify(c) File "/usr/libexec/vyos/conf_mode/protocols_isis.py", line 158, in verify f'"protocols isis {process} redistribute {afi} {proto}"!') ^^^^^^^ NameError: name 'process' is not defined (cherry picked from commit 78212414e085d6261a32015553eb3e407f77792f)
2024-03-22policy: T6130: Revert commit 960caceaapostoliuk
This reverts commit 960cace189d7ace2bea0968646b1348b415e0363. All community rules syntax was changed. T5357 is invalid bug report. VyOS cannot use new configuration syntax in the previous versions. (cherry picked from commit 72378c67ef1eee01a06e2f9a194a0870c6a7fdd2)
2024-03-21vti: T6085: interface is always down and only enabled by IPSec daemonChristian Breunig
When a VTI interface is just created, it is in ADMIN UP state by default, even if an IPSec peer is not connected. After the peer is disconnected the interface goes to DOWN state as expected. This breaks routing logic - for example, static routes through VTI interfaces will be active even if a peer is not connected. This changes to logic so ADMIN UP/DOWN state can only be changed by the vti-up-down helper script. Error was introduced during the Perl -> Python migration and move to the generic vyos.ifconfig abstraction during the 1.4 development cycle. (cherry picked from commit 9eb018c4935235d292d7c693ac15da5761be064a)
2024-03-21dhcp: T5164: op cmd: "show dhcp server leases state" with available options ↵khramshinr
does not show any result
2024-03-21conntrack: T6147: Enable conntrack when firewall state-policy is definedsarthurdev
* Move global state-policy smoketest to it's own test, verify conntrack (cherry picked from commit 62bda3b082a79c2f31483dba5bfeb19464f6dbe2)
2024-03-19Merge pull request #3152 from vyos/mergify/bp/sagitta/pr-3150Daniil Baturin
T6138: Fix op-mode show conntrack table with flowtable offloads (backport #3150)
2024-03-19T6138: Fix op-mode show conntrack table with flowtable offloadsViacheslav Hletenko
The op-mode command `show conntrack table ipv4` fails if gets a conntrack entrie with `flowtable` offload. Those entries do not have key `timeout` ``` File "/usr/libexec/vyos/op_mode/conntrack.py", line 115, in get_formatted_output timeout = meta['timeout'] ~~~~^^^^^^^^^^^ ``` Use the timeout `n/a` for those offload conntrack entries (cherry picked from commit a75be3b6814dd39711c157c29405ee6bd83993f5)
2024-03-18T6136: add error checks when using dynamic firewall groupsNicolas Fort
(cherry picked from commit e2df1f4929774792c1d4bfb78c2dfa5bdf7f0825)
2024-03-18T6121: Extend service config-sync to new sectionsViacheslav Hletenko
Extend `service config-sync` with new sections: - LeafNodes: pki, policy, vpn, vrf (syncs the whole sections) - Nodes: interfaces, protocols, service (syncs subsections) In this cae the Node allows to uses the next level section i.e subsection For example any of the subsection of the node `interfaces`: - set service config-sync section interfaces pseudo-ethernet - set service config-sync section interfaces virtual-ethernet Example of the config: ``` set service config-sync mode 'load' set service config-sync secondary address '192.0.2.1' set service config-sync secondary key 'xxx' set service config-sync section firewall set service config-sync section interfaces pseudo-ethernet set service config-sync section interfaces virtual-ethernet set service config-sync section nat set service config-sync section nat66 set service config-sync section protocols static set service config-sync section pki set service config-sync section vrf ``` (cherry picked from commit 25b611f504521181f85cb4460bfdfd702c377b5e)
2024-03-16T6090: fix policy route migration script. Ensure that tcp flags migration ↵Nicolas Fort
occurs also if only <policy route> is defined. (cherry picked from commit 1048f49e403d7ce3df379bbf48e7fcc60a74e67b)
2024-03-13Merge pull request #3129 from vyos/mergify/bp/sagitta/pr-3125Daniil Baturin
radvd: T6118: add nat64prefix support RFC8781 (backport #3125)
2024-03-13Merge pull request #3128 from vyos/mergify/bp/sagitta/pr-3093Christian Breunig
T2447: add configurable kernel boot option 'disable-power-saving' (backport #3093)
2024-03-13radvd: T6118: add nat64prefix support RFC8781Christian Breunig
Add support for pref64 option, as defined in RFC8781. The prefix valid lifetime must not be smaller than the "interface interval max" definition which defaults to 600. set service router-advert interface eth1 nat64prefix 64:ff9b::/96 (cherry picked from commit f1ead5c6a16aba00699b8a5b9c18ef6cffe8cc4d)
2024-03-13T2447: add configurable kernel boot option 'disable-power-saving'Christian Breunig
Lower available CPU C states to a minimum if this option set. This will set Kernel commandline options "intel_idle.max_cstate=0 processor.max_cstate=1". (cherry picked from commit 3a3e0dff4ff1f80835eca6b2362d792e3ecacc8e)
2024-03-13grub: T4548: Fixed configuration files orderzsdc
To iterate files on ext* file systems GRUB reads their inodes one by one, ignoring names. This breaks our configuration logic that relies on proper loading order. This commit adds a helper `sort_inodes()` that needs to be used whenever GRUB configuration files are created. It recreates files, changing their inodes in a way where inodes order matches alphabetical order. (cherry picked from commit f74923202311e853b677e52cd83bae2be9605c26)
2024-03-12conntrack: T5080: Fix rule order for applied conntrack modulessarthurdev
(cherry picked from commit 1fbda31623054ee944d063f738e4d1d4170341ef)
2024-03-12vrrp: T6020: vrrp health-check script not applied correctly in keepalived.confkhramshinr
Added health-check to sync-group in CLI Don't use instance health-check when instance in sync group member Disallow wrong healtch-check configurations New smoke test
2024-03-10firewall: T6071: truncate rule description field to 255 charactersChristian Breunig
(cherry picked from commit 259ef4740413b39da9b122db19c549eeec88114c)
2024-03-06T6075: firewall and NAT: check if interface-group exists when using them in ↵Nicolas Fort
firewall|nat rules. (cherry picked from commit 3c0634e572ffdecaf24a9dac16678427f22761ab)
2024-03-06T6096: Config commits are not synced properly because 00vyos-sync is deleted ↵Apachez
by vyos-router (cherry picked from commit 433faaa9fe7d7dfc02db78ff039e772f5037037a)
2024-03-06Merge pull request #3086 from vyos/mergify/bp/sagitta/pr-3079Christian Breunig
T6084: Add NHRP dependency for IPsec and fix NHRP empty config bug (backport #3079)
2024-03-05http-api: T6069: fix allocation outside of thread lockJohn Estabrook
(cherry picked from commit 7503e419d0dbc9ba81f7299d9df173c0a82f20da)
2024-03-05T6084: Add NHRP dependency for IPsec and fix NHRP empty config bugViacheslav Hletenko
If we have any `vpn ipsec` and `protocol nhrp` configuration we get the empty configuration file `/run/opennhrp/opennhrp.conf` after rebooting the system. Use config dependency instead of the old `resync_nhrp` function fixes this issue (cherry picked from commit 689fea253d9019df20d5c6ac7fa22d5e8454afab)
2024-03-04ospfv3: T6087: add support to redistribute IS-IS routesChristian Breunig
(cherry picked from commit 6a97fdfa1ba9b4135a51498ea5acabb804256b2c)
2024-03-02Merge pull request #3062 from sarthurdev/T6079_sagittaDaniil Baturin
dhcp-server: T6079: Disable duplicate static-mappings on migration
2024-03-02ospf: T5717: sync code with ospfv3 implementationChristian Breunig
(cherry picked from commit 298bcc5cb90c4c83981ec4baaaa0db785306867d)
2024-03-02ospfv3: T5717: allow metric and metric-type on redistributed routesChristian Breunig
Example: vyos@vyos# set protocols ospfv3 redistribute bgp Possible completions: metric OSPF default metric metric-type OSPF metric type for default routes (default: 2) route-map Specify route-map name to use (cherry picked from commit ed2c288c8a9031f91acf76d20b84e2002696981c)
2024-03-01smoketest: T6079: probe for duplicate IP address static-mappingChristian Breunig
2024-02-29T5504 Keepalived VRRP ability to set more than one peer-addressNataliia Solomko
(cherry picked from commit 3480d92a8c4d84e8c1f94a9362bac2be0cc77921)
2024-02-29Merge pull request #3058 from vyos/mergify/bp/sagitta/pr-3053Christian Breunig
container: T6074: do not allow deleting images which have a container running (backport #3053)
2024-02-29banner: T6077: implement ASCII contest winner default logoChristian Breunig
Implement VyOS ASCII art contest winners logo as the default for our MOTD (cherry picked from commit 0ea3a454cf560171d3eb9d4d1b97b172c06360fe)
2024-02-29dhcp-server: T6079: Disable duplicate static-mappings on migrationsarthurdev
2024-02-28vrf: conntrack: T6073: Populate VRF zoning chains only while conntrack is ↵sarthurdev
required (cherry picked from commit 6f7d1e15665655e37e8ca830e28d9650445c1217)
2024-02-28container: T6074: do not allow deleting images which have a container runningChristian Breunig
The current VyOS container image manipulation "delete container image" command allows force removal of container images - even if they still have a container running. Drop the --force option from the op-mode script. vyos@vyos:~$ delete container image 2636705a815a Error: image used by 6adb0175d47f.. image is in use by a container: consider listing external containers and force-removing image (cherry picked from commit bfc065f2c4dcfc969981453e49b8156330674006)
2024-02-24Merge pull request #3048 from vyos/mergify/bp/sagitta/pr-3046Christian Breunig
container: T6060: support removing all container images at once via op-mode (backport #3046)
2024-02-24Merge pull request #3047 from vyos/mergify/bp/sagitta/pr-2633Daniil Baturin
T5781: add ability to add additional minisign keys (backport #2633)
2024-02-24container: T6060: support removing all container images at once via op-modeChristian Breunig
cpo@LR1.wue3:~$ show container image REPOSITORY TAG IMAGE ID CREATED SIZE docker.io/library/busybox latest 3f57d9401f8d 5 weeks ago 4.5 MB docker.io/jacobalberty/unifi v7.5 f6df690d6c67 4 months ago 827 MB docker.io/jacobalberty/unifi v7.4 7838b75ef7b9 7 months ago 786 MB cpo@LR1.wue3:~$ delete container image Possible completions: 3f57d9401f8d Delete container image 7838b75ef7b9 all f6df690d6c67 cpo@LR1.wue3:~$ delete container image all cpo@LR1.wue3:~$ show container image REPOSITORY TAG IMAGE ID CREATED SIZE (cherry picked from commit 9e51a1661fac3e0d762cffdd28705e7e4bad76e9)
2024-02-24T5781: use dynamic minisign key listKyleM
Updated image_installer.py to try and validate image with all minisign public keys in /usr/share/vyos/keys/ (cherry picked from commit dfbc854157fa4655a8f459b2447df64dc74119d1)
2024-02-24container: T5909: move registry login to op-modeChristian Breunig
It does not make sense to perform the "podman login" command when setting up containers, as images are not automatically pulled in from the registry - due to issues with the default route during startup. The same issue manifests in "podman login" where we can not login to a registry unless there is a default route present. This commit changes the behavior that the container registry is part of the configuration, but it is only referenced during "add container image" and thus never during system boot. (cherry picked from commit baf30d8319ef4d0f0cc4cdf0f7c12f03f8a492b6)
2024-02-20event-handler: T6048: handling exception when _PID is not foundgavol
(cherry picked from commit b678009b484eb6d20fceb5db00b0dc62344296a2)
2024-02-18bridge: T6043: do not call vxlan dependency if interface does not exist (yet)Christian Breunig
In order to keep the proper priority list during system startup and on initial setup/commit for this feature the dependent VXLAN code should not be called, if the interface in question does not exist (yet). (cherry picked from commit dbe8c613bb80bc8b714398825054ade5942ea75b)
2024-02-17Merge pull request #3023 from vyos/mergify/bp/sagitta/pr-3019John Estabrook
login: T5972: add possibility to disable individual local user accounts (backport #3019)
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-25 22:51:12 +0000