summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2022-10-14T4533: Allow basic permissions to unprivileged RADIUS usersViacheslav Hletenko
Unprivileged RADIUS users cannot do simple diagnostics like ping or traceroute. Allow them such tools. Ability to execute op-mode commands for them. It is not new 'operator mode' feature but it allows RADIUS users execute op-mode commands
2022-10-14http-api: T4749: transition to config_dictJohn Estabrook
2022-10-14T4725: Fix Regex for correctly reset IPsec peersViacheslav Hletenko
As IPsec site-so-site was rewritten we do not need replace ':' => '-' as ':' can not be in the connection name So connection name can not use IP(v6) address as peer name And current peers/connections not required prefix 'peer_' Fix template that search correctly connection name of the peers that allow to reset them again (reset ipsec peer was broken)
2022-10-13monitoring: T4746: Add exception if we do not have firewall rulesViacheslav Hletenko
Telegraf checks the firewall table 'vyos_filter' but it we don't have any firewall in the system we don't have this table by default It cause commit error for "service monitoring" Add exception if the table "vyos_filter" is not found
2022-10-12bgp: T4744: Directly connected neighbors and ebgp-multihop checkViacheslav Hletenko
BGP directly connected neighbors (interface neighbors) do not compatible with ebgp-multihop option
2022-10-12Merge pull request #1555 from goodNETnick/ssh_otpChristian Poessinger
system login: T874: add 2FA support for local and ssh authentication
2022-10-11system login: T874: add 2FA support for local and ssh authenticationgoodNETnick
2022-10-11Merge pull request #1574 from Cheeze-It/currentChristian Poessinger
isis: T4739: ISIS segment routing being refactored
2022-10-11isis: T4739: ISIS segment routing being refactoredCheeze_It
This is to refactor ISIS segment routing to match up with OSPF segment routing.
2022-10-11conntrack: T4740: Set correct error msg if enrties not foundViacheslav Hletenko
Set correct error message if conntrack entries not found If we get XML raw data with len 0 it means there are no entries in the conntrack table
2022-10-10Merge pull request #1563 from sever-sever/T4716Christian Poessinger
ssh: T4716: Ability to configure RekeyLimit data and time
2022-10-10ssh: T4716: Ablity to configure RekeyLimit data and timeViacheslav Hletenko
Ability to configure SSH RekeyLimit data (in Megabytes) and time (in Minutes) set service ssh rekey data 1024 set service ssh rekey time 60
2022-10-07graphql: T4738: remove templated requests pending rewriteJohn Estabrook
2022-10-07graphql: T4738: generate schema defs for configsession methodsJohn Estabrook
2022-10-07graphql: T4736: fix import error to correct JSON outputJohn Estabrook
2022-10-07Merge pull request #1572 from Cheeze-It/currentChristian Poessinger
ospf: T4707: Add OSPF segment routing for FRR
2022-10-07Merge branch 'current' into radius-rate-limit-compChristian Poessinger
2022-10-06ospf: T4707: Add OSPF segment routing for FRRCheeze_It
In this commit we add OSPF segment routing, smoke tests, handlers, FRR template changes, and CLI commands.
2022-10-06Merge pull request #1567 from aapostoliuk/T4660-sagittaChristian Poessinger
policy: T4660: Changed CLI syntax in route-map set community
2022-10-03wwan: T4728: fix crontab file missing newlineBen Hughes
2022-10-03T4726: add completion help and validation for accel-ppp vendor optionDaniil Baturin
2022-10-03policy: T4660: Changed CLI syntax in route-map set communityaapostoliuk
Changed CLI syntax in route-map set community, set large-community, set extcommunity Allows to add multiple communities, large-communities and extcommunities in clear view. Added new well-known communities. Added non-transitive feature in extcommunities. Fixed community's validators.
2022-10-01T4722: consistently use the "IPsec" spelling for IPsecDaniil Baturin
2022-09-29firewall: T2199: Fix op-mode script for interface migration and vyos_filter ↵sarthurdev
table name
2022-09-28Merge pull request #1561 from sever-sever/T4715Christian Poessinger
login: T4715: Auto logout user after inactivity
2022-09-28login: T4715: Auto logout user after inactivityViacheslav Hletenko
Ability to terminate interactive sessions (TTY/PTS) after a period of inactivity. set system login timeout '300'
2022-09-28nat: T4713: Fix op-mode nat translation outputsarthurdev
2022-09-28conserver: T4717: Support for setting a name for console-server devicesWilliam Hughes
This adds a new 'alias' property to the console-server device definition to allow users to connect to a console using a human-readable name rather than just the device name. For a configuration like: service { console-server { device ttyUSB0 { speed 115200 alias my-server } } } Users can connect either by doing `connect console ttyUSB0`, or `connect console my-server`. Names: * Must be unique * Are limited to 128 characters * Are optional - if not specified, only the `connect console ttyX` form can be used
2022-09-26ethernet: T4689: support asymetric RFS configuration on multiple interfacesChristian Poessinger
The initial implementation from commit ac4e07f9 ("rfs: T4689: Support RFS (Receive Flow Steering)") always adjusted the global rps_sock_flow_entries configuration. So if RFS was enabled for one NIC but not the other - it did not work. According to the documentation: RFS is only available if the kconfig symbol CONFIG_RPS is enabled (on by default for SMP). The functionality remains disabled until explicitly configured. The number of entries in the global flow table is set through: /proc/sys/net/core/rps_sock_flow_entries The number of entries in the per-queue flow table are set through: /sys/class/net/<dev>/queues/rx-<n>/rps_flow_cnt Both of these need to be set before RFS is enabled for a receive queue. Values for both are rounded up to the nearest power of two. The suggested flow count depends on the expected number of active connections at any given time, which may be significantly less than the number of open connections. We have found that a value of 32768 for rps_sock_flow_entries works fairly well on a moderately loaded server. This commit sets rps_sock_flow_entries via sysctl on bootup leafing the RFS configuration to the interface level.
2022-09-26Merge pull request #1545 from sever-sever/T4557Christian Poessinger
ids: T4557: Migrate threshold and add new threshold types
2022-09-26ids: T4557: Migrate threshold and add new threshold typesViacheslav Hletenko
Migrate "service ids ddos-protection threshold xxx" to "service ids ddos-protection general threshold xxx" Add new threshold types: set service ids ddos-protection threshold tcp xxx set service ids ddos-protection threshold udp xxx set service ids ddos-protection threshold icmp xxx
2022-09-22ipoe: T4703: fix migration of vlan node for loca authenticated usersChristian Poessinger
2022-09-22Merge pull request #1554 from sarthurdev/nat_refactorChristian Poessinger
nat: T4605: Fix op-mode NAT table name
2022-09-22nat: T4605: Fix op-mode NAT table namesarthurdev
2022-09-22Merge pull request #1521 from sever-sever/T3476Christian Poessinger
update-check: T3476: Allow update-check for VyOS images
2022-09-22Merge pull request #1552 from sarthurdev/nat_refactorChristian Poessinger
nat: nat66: T4605: T4706: Refactor NAT/NAT66 and use new table name
2022-09-21nat: T4605: Refactor static NAT to use python module for parsing rulessarthurdev
* Rename table to vyos_nat * Add static NAT smoketest
2022-09-21nat66: T4605: Refactor NAT66 to use python module for parsing rulessarthurdev
* Rename table to vyos_nat * Refactor tests to use `verify_nftables` format
2022-09-21nat: T4605: Refactor NAT to use python module for parsing rulessarthurdev
* Rename table to vyos_nat * Refactor tests to use `verify_nftables` format
2022-09-21ipoe: T4678: T4703: rewrite to get_config_dict()Christian Poessinger
In addition to the rewrite to make use of get_config_dict() the CLI is slightly adjusted as specified in T4703. * Rename vlan-id and vlan-range to simply vlan * Rename network-mode to simply mode * Re-use existing common Jinja2 template for Accel-PPP which are shared with PPPoE and SSTP server. * Retrieve default values via defaultValue XML node
2022-09-20ipsec: T4118: bugfix migration of IKEv2 road-warrior "id" CLI optionChristian Poessinger
The "authentication id" option for road-warriors did not get migrated to the new local-id CLI node. This has been fixed.
2022-09-19ipsec: T4118: bugfix config migrator 9-to-10Christian Poessinger
When a CLI node is set with a migrator and is not a valueLess node, we need to specify the "value" using the value= operation in config.set(). This fixes the config load error: vyos.configsession.ConfigSessionError: Invalid config file (syntax error): error at line 353
2022-09-18Merge pull request #1543 from Cheeze-It/currentChristian Poessinger
isis: T4693: Fix ISIS segment routing configurations, part deux
2022-09-18Update protocols_isis.pyCheeze_It
isis: T4693: Fix ISIS segment routing configurations This change is to fix more bugs in which ISIS segment routing was broken due to a refactor. This change also introduces a few additions to the ISIS handler for checking per prefix validations for segment value and mutual exclusivity for two options.
2022-09-17Merge pull request #1546 from nicolas-fort/fwall-jumpChristian Poessinger
T4699: Firewall: Add jump action in firewall ruleset
2022-09-17wireguard: T4702: actively revoke peer if it gets disabledChristian Poessinger
When any configured peer is set to `disable` while the Wireguard tunnel is up and running it does not get actively revoked and removed. This poses a security risk as connections keep beeing alive. Whenever any parameter of a peer changes we actively remove the peer and fully recreate it on the fly.
2022-09-17pppoe-server: T4703: combine vlan-id and vlan-range into single CLI nodeChristian Poessinger
The initial Accel-PPP PPPoE implementation used: set service pppoe-server interface <name> vlan-id <id> set service pppoe-server interface <name> vlan-range <start-stop> This is actually a duplicated CLI node.
2022-09-16Merge pull request #1463 from sever-sever/T4118Daniil Baturin
ipsec: T4118: Change vpn ipsec syntax for IKE ESP and peer
2022-09-16T4699: Firewall: Add jump action in firewall rulestNicolas Fort
2022-09-16ipsec: T4118: Change vpn ipsec syntax for IKE ESP and peerViacheslav Hletenko
Migration and Change boolean nodes "enable/disable" to disable-xxxx, enable-xxxx and just xxx for VPN IPsec configurations - IKE changes: - replace 'ipsec ike-group <tag> mobike disable' => 'ipsec ike-group <tag> disable-mobike' - replace 'ipsec ike-group <tag> ikev2-reauth yes|no' => 'ipsec ike-group <tag> ikev2-reauth' - ESP changes: - replace 'ipsec esp-group <tag> compression enable' => 'ipsec esp-group <tag> compression' - PEER changes: - replace: 'peer <tag> id xxx' => 'peer <tag> local-id xxx' - replace: 'peer <tag> force-encapsulation enable' => 'peer <tag> force-udp-encapsulation' - add option: 'peer <tag> remote-address x.x.x.x' Add 'peer <name> remote-address <name>' via migration script
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-23 14:18:53 +0000