From 50068c7bbdb409a05684898481a7b4fbfcbb106f Mon Sep 17 00:00:00 2001 From: Christian Poessinger Date: Sat, 27 Jun 2020 22:28:59 +0200 Subject: ifconfig: T2653: move wirelessmodem (WWAN) interface to get_config_dict() --- data/templates/wwan/ip-down.script.tmpl | 12 ++++++------ data/templates/wwan/ip-pre-up.script.tmpl | 10 +++++----- data/templates/wwan/ip-up.script.tmpl | 12 ++++++------ data/templates/wwan/peer.tmpl | 21 ++++++++------------- 4 files changed, 25 insertions(+), 30 deletions(-) (limited to 'data/templates/wwan') diff --git a/data/templates/wwan/ip-down.script.tmpl b/data/templates/wwan/ip-down.script.tmpl index f7b38cbc5..9dc15ea99 100644 --- a/data/templates/wwan/ip-down.script.tmpl +++ b/data/templates/wwan/ip-down.script.tmpl @@ -11,17 +11,17 @@ fi # Determine if we are running inside a VRF or not, required for proper routing table # NOTE: the down script can not be properly templated as we need the VRF name, # which is not present on deletion, thus we read it from the operating system. -if [ -d /sys/class/net/{{ intf }}/upper_* ]; then +if [ -d /sys/class/net/{{ ifname }}/upper_* ]; then # Determine upper (VRF) interface - VRF=$(basename $(ls -d /sys/class/net/{{ intf }}/upper_*)) + VRF=$(basename $(ls -d /sys/class/net/{{ ifname }}/upper_*)) # Remove upper_ prefix from result string VRF_NAME=${VRF#"upper_"} # Remove default route from VRF routing table - vtysh -c "conf t" -c "vrf ${VRF_NAME}" -c "no ip route 0.0.0.0/0 {{ intf }}" + vtysh -c "conf t" -c "vrf ${VRF_NAME}" -c "no ip route 0.0.0.0/0 {{ ifname }}" else # Remove default route from GRT (global routing table) - vtysh -c "conf t" -c "no ip route 0.0.0.0/0 {{ intf }}" + vtysh -c "conf t" -c "no ip route 0.0.0.0/0 {{ ifname }}" fi -DIALER_PID=$(cat /var/run/{{ intf }}.pid) -logger -t pppd[$DIALER_PID] "removed default route via {{ intf }} metric {{ metric }}" +DIALER_PID=$(cat /var/run/{{ ifname }}.pid) +logger -t pppd[$DIALER_PID] "removed default route via {{ ifname }} metric {{ backup.distance }}" diff --git a/data/templates/wwan/ip-pre-up.script.tmpl b/data/templates/wwan/ip-pre-up.script.tmpl index 7a17a1c71..efc065bad 100644 --- a/data/templates/wwan/ip-pre-up.script.tmpl +++ b/data/templates/wwan/ip-pre-up.script.tmpl @@ -7,17 +7,17 @@ ipparam=$6 # device name and metric are received using ipparam device=`echo "$ipparam"|awk '{ print $1 }'` -if [ "$device" != "{{ intf }}" ]; then +if [ "$device" != "{{ ifname }}" ]; then exit fi # add some info to syslog -DIALER_PID=$(cat /var/run/{{ intf }}.pid) +DIALER_PID=$(cat /var/run/{{ ifname }}.pid) logger -t pppd[$DIALER_PID] "executing $0" -echo "{{ description }}" > /sys/class/net/{{ intf }}/ifalias +echo "{{ description }}" > /sys/class/net/{{ ifname }}/ifalias {% if vrf -%} -logger -t pppd[$DIALER_PID] "configuring interface {{ intf }} for VRF {{ vrf }}" -ip link set dev {{ intf }} master {{ vrf }} +logger -t pppd[$DIALER_PID] "configuring interface {{ ifname }} for VRF {{ vrf }}" +ip link set dev {{ ifname }} master {{ vrf }} {% endif %} diff --git a/data/templates/wwan/ip-up.script.tmpl b/data/templates/wwan/ip-up.script.tmpl index 3a7eec800..2603a0286 100644 --- a/data/templates/wwan/ip-up.script.tmpl +++ b/data/templates/wwan/ip-up.script.tmpl @@ -9,17 +9,17 @@ if [ -z $(echo $2 | egrep "(ttyS[0-9]+|usb[0-9]+b.*)$") ]; then fi # Determine if we are running inside a VRF or not, required for proper routing table -if [ -d /sys/class/net/{{ intf }}/upper_* ]; then +if [ -d /sys/class/net/{{ ifname }}/upper_* ]; then # Determine upper (VRF) interface - VRF=$(basename $(ls -d /sys/class/net/{{ intf }}/upper_*)) + VRF=$(basename $(ls -d /sys/class/net/{{ ifname }}/upper_*)) # Remove upper_ prefix from result string VRF_NAME=${VRF#"upper_"} # Remove default route from VRF routing table - vtysh -c "conf t" -c "vrf ${VRF_NAME}" -c "ip route 0.0.0.0/0 {{ intf }} {{ metric }}" + vtysh -c "conf t" -c "vrf ${VRF_NAME}" -c "ip route 0.0.0.0/0 {{ ifname }} {{ backup.distance }}" else # Remove default route from GRT (global routing table) - vtysh -c "conf t" -c "ip route 0.0.0.0/0 {{ intf }} {{ metric }}" + vtysh -c "conf t" -c "ip route 0.0.0.0/0 {{ ifname }} {{ backup.distance }}" fi -DIALER_PID=$(cat /var/run/{{ intf }}.pid) -logger -t pppd[$DIALER_PID] "added default route via {{ intf }} metric {{ metric }} ${VRF_NAME}" +DIALER_PID=$(cat /var/run/{{ ifname }}.pid) +logger -t pppd[$DIALER_PID] "added default route via {{ ifname }} metric {{ backup.distance }} ${VRF_NAME}" diff --git a/data/templates/wwan/peer.tmpl b/data/templates/wwan/peer.tmpl index 0168283fd..cdedf02ad 100644 --- a/data/templates/wwan/peer.tmpl +++ b/data/templates/wwan/peer.tmpl @@ -1,14 +1,10 @@ ### Autogenerated by interfaces-wirelessmodem.py ### -{% if description %} -# {{ description }} -{% endif %} -ifname {{ intf }} -ipparam {{ intf }} -linkname {{ intf }} -{% if name_server -%} -usepeerdns -{%- endif %} +{{ "# description: " + description if description is defined }} +ifname {{ ifname }} +ipparam {{ ifname }} +linkname {{ ifname }} +{{ "usepeerdns" if no_peer_dns is defined }} # physical device {{ device }} lcp-echo-failure 0 @@ -22,8 +18,7 @@ noauth crtscts lock persist -{% if on_demand -%} -demand -{%- endif %} +{{ "demand" if ondemand is defined }} + +connect '/usr/sbin/chat -v -t6 -f /etc/ppp/peers/chat.{{ ifname }}' -connect '/usr/sbin/chat -v -t6 -f {{ chat_script }}' -- cgit v1.2.3