From f00985ccc246194a248c8ccbbc4a9fbc6093e3e7 Mon Sep 17 00:00:00 2001 From: Christian Poessinger Date: Wed, 18 Nov 2020 21:41:27 +0100 Subject: Revert "wireless: T2241: add "wds" CLI option" This reverts commit 806f35b5856c3f8dae634718a6a9e82cc90bb63a. Unfortunately this did not work our in the attempt to bridge a station to a bridge "brX" interface. Also adjusting the wireless interface during operation cause several exceptions and the feature is removed again as it was never in any production system. --- data/templates/wifi/hostapd.conf.tmpl | 8 -------- 1 file changed, 8 deletions(-) (limited to 'data') diff --git a/data/templates/wifi/hostapd.conf.tmpl b/data/templates/wifi/hostapd.conf.tmpl index 16d9f7c98..e66e3472b 100644 --- a/data/templates/wifi/hostapd.conf.tmpl +++ b/data/templates/wifi/hostapd.conf.tmpl @@ -451,14 +451,6 @@ macaddr_acl=0 max_num_sta={{ max_stations }} {% endif %} -{% if wds is defined %} -# WDS (4-address frame) mode with per-station virtual interfaces -# (only supported with driver=nl80211) -# This mode allows associated stations to use 4-address frames to allow layer 2 -# bridging to be used. -wds_sta=1 -{% endif %} - {% if isolate_stations is defined %} # Client isolation can be used to prevent low-level bridging of frames between # associated stations in the BSS. By default, this bridging is allowed. -- cgit v1.2.3