From 4d721a58020971d00ab854c37b68e88359999f9c Mon Sep 17 00:00:00 2001 From: Christian Breunig Date: Tue, 19 Dec 2023 07:49:03 +0100 Subject: T2898: add ndp-proxy service VyOS CLI command set service ndp-proxy interface eth0 prefix 2001:db8::/64 mode 'static' Will generate the following NDP proxy configuration $ cat /run/ndppd/ndppd.conf # autogenerated by service_ndp-proxy.py # This tells 'ndppd' how often to reload the route file /proc/net/ipv6_route route-ttl 30000 # This sets up a listener, that will listen for any Neighbor Solicitation # messages, and respond to them according to a set of rules proxy eth0 { # Turn on or off the router flag for Neighbor Advertisements router no # Control how long to wait for a Neighbor Advertisment message before invalidating the entry (milliseconds) timeout 500 # Control how long a valid or invalid entry remains in the cache (milliseconds) ttl 30000 # This is a rule that the target address is to match against. If no netmask # is provided, /128 is assumed. You may have several rule sections, and the # addresses may or may not overlap. rule 2001:db8::/64 { static } } --- interface-definitions/include/version/nat66-version.xml.i | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'interface-definitions/include') diff --git a/interface-definitions/include/version/nat66-version.xml.i b/interface-definitions/include/version/nat66-version.xml.i index 478ca080f..43a54c969 100644 --- a/interface-definitions/include/version/nat66-version.xml.i +++ b/interface-definitions/include/version/nat66-version.xml.i @@ -1,3 +1,3 @@ - + -- cgit v1.2.3