From e10aea428e1f807f24052d170e9d55b79d0ba535 Mon Sep 17 00:00:00 2001 From: hagbard Date: Mon, 16 Dec 2019 07:51:58 -0800 Subject: service-pppoe: T1878: option pppoe single-session implementation - renamed files to fit the schemas in the directories --- interface-definitions/service-pppoe.xml.in | 616 +++++++++++++++++++++++++++++ 1 file changed, 616 insertions(+) create mode 100644 interface-definitions/service-pppoe.xml.in (limited to 'interface-definitions/service-pppoe.xml.in') diff --git a/interface-definitions/service-pppoe.xml.in b/interface-definitions/service-pppoe.xml.in new file mode 100644 index 000000000..e73493309 --- /dev/null +++ b/interface-definitions/service-pppoe.xml.in @@ -0,0 +1,616 @@ + + + + + + + Point to Point over Ethernet (PPPoE) Server + 900 + + + + + Enable SNMP + + + + + enable SNMP master agent mode + + + + + + + + Access concentrator name + + ^[a-zA-Z0-9]{1,100} + + access-concentrator name limited to alphanumerical characters only (max. 100) + + + + + Authentication for remote access PPPoE Server + + + + + Local user authentication for PPPoE server + + + + + User name for authentication + + + + + Option to disable a PPPoE Server user + + + + + Password for authentication + + + + + Static client IP address + + + + + Upload/Download speed limits + + + + + Upload bandwidth limit in kbits/sec + + + + + + + + Download bandwidth limit in kbits/sec + + + + + + + + + + + + + + Authentication mode for PPPoE Server + + local + Use local username/password configuration + + + radius + Use a RADIUS server to autenticate users + + + ^(local|radius) + + + local radius + + + + + + IP address of RADIUS server + + ipv4 + IP address of RADIUS server + + + + + + Key for accessing the specified server + + + + + Maximum number of simultaneous requests to server (default: unlimited) + + + + + If server does not responds mark it as unavailable for this amount of time in seconds + + + + + + + RADIUS settings + + + + + Timeout to wait response from server (seconds) + + + + + Timeout to wait reply for Interim-Update packets. (default 3 seconds) + + + + + Maximum number of tries to send Access-Request/Accounting-Request queries + + + + + Value to send to RADIUS server in NAS-Identifier attribute and to be matched in DM/CoA requests. + + + + + Value to send to RADIUS server in NAS-IP-Address attribute and to be matched in DM/CoA requests. Also DM/CoA server will bind to that address. + + + + + IPv4 address and port to bind Dynamic Authorization Extension server (DM/CoA) + + + + + IP address for Dynamic Authorization Extension server (DM/CoA) + + + + + Port for Dynamic Authorization Extension server (DM/CoA) + + + + + Secret for Dynamic Authorization Extension server (DM/CoA) + + + + + + + Upload/Download speed limits + + + + + Specifies which radius attribute contains rate information. (default is Filter-Id) + + + + + Specifies the vendor dictionary. (dictionary needs to be in /usr/share/accel-ppp/radius) + + + + + Enables Bandwidth shaping via RADIUS + + + + + + + + + + + + Pool of client IP addresses (must be within a /24) + + + + + First IP address in the pool + + + + + + + + Last IP address in the pool + + + + + + + + Client IP subnet (CIDR notation) + + + + Not a valid CIDR formatted prefix + + + + + + + + Pool of client IPv6 addresses + + + + + Format: ipv6prefix/mask,prefix_len (e.g.: fc00:0:1::/48,64 - divides prefix into /64 subnets for clients) + + + + + + Format: ipv6prefix/mask,prefix_len (delegate to clients through DHCPv6 prefix delegation - rfc3633) + + + + + + + + IPv4 Domain Name Service (DNS) server + + + + + Primary DNS server + + ipv4 + IPv4 address + + + + + + + + + Secondary DNS server + + ipv4 + IPv4 address + + + + + + + + + + + IPv6 Domain Name Service (DNS) server + + + + + + ipv6 + IPv6 address + + Primary DNS server + + + + + + + + + ipv6 + IPv6 address + + Secondary DNS server + + + + + + + + + ipv6 + IPv6 address + + Tertiary DNS server + + + + + + + + + + + interface(s) to listen on + + + + + + + + VLAN monitor for the automatic creation of vlans (user per vlan) + + + + VLAN ID needs to be between 1 and 4096 + + + + + + VLAN monitor for the automatic creation of vlans (user per vlan) + + (409[0-6]|40[0-8][0-9]|[1-3][0-9]{3}|[1-9][0-9]{0,2})-(409[0-6]|40[0-8][0-9]|[1-3][0-9]{3}|[1-9][0-9]{0,2}) + + + + + + + + + local gateway address + + + + + + + + Maximum Transmission Unit (MTU) - default 1492 + + + + + + + + Limits the connection rate from a single source + + + + + Acceptable rate of connections (e.g. 1/min, 60/sec) + + ^[0-9]+\/(min|sec)$ + + illegal value + + + + + Burst count + + + + + Timeout in seconds + + + + + + + Service name + + ^[a-zA-Z0-9\-]{1,100} + + servicename can contain aplhanumerical characters and dashes only (max. 100) + + + + + Windows Internet Name Service (WINS) server settings + + + + + Primary WINS server + + + + + + + + Secondary WINS server + + + + + + + + + + Advanced protocol options + + + + + Minimum acceptable MTU (68-65535) + + + + + + + + Preferred MRU (68-65535) + + + + + + + + CCP negotiation (default disabled) + + + + + + Specifies MPPE negotiation preference. (default prefer mppe) + + + + + Ask client for MPPE, if it rejects then drop the connection + + + + + + Ask client for MPPE, if it rejects do not fail + + + + + + Deny MPPE + + + + + + + + LCP echo-requests/sec + + + + + + + + Maximum number of Echo-Requests may be sent without valid reply + + + + + + + + Timeout in seconds to wait for any peer activity. If this option specified it turns on adaptive lcp echo functionality and "lcp-echo-failure" is not used. + + + + + + + + IPv4 (IPCP) negotiation algorithm + + ^(deny|allow|prefer|require) + + invalid value + + deny + Do not negotiate IPv4 + + + allow + Negotiate IPv4 only if client requests + + + prefer + Ask client for IPv4 negotiation, do not fail if it rejects + + + require + Require IPv4 negotiation + + + + + + IPv6 (IPCP6) negotiation algorithm + + ^(deny|allow|prefer|require) + + invalid value + + deny + Do not negotiate IPv6 + + + allow + Negotiate IPv6 only if client requests + + + prefer + Ask client for IPv6 negotiation, do not fail if it rejects + + + require + Require IPv6 negotiation + + + + + + Fixed or random interface identifier for IPv6 + + random + Random interface identifier for IPv6 + + + x:x:x:x + specify interface identifier for IPv6 + + + + + + Peer interface identifier for IPv6 + + x:x:x:x + Interface identifier for IPv6 + + + random + Use a random interface identifier for IPv6 + + + ipv4 + Calculate interface identifier from IPv4 address, for example 192:168:0:1 + + + calling-sid + Calculate interface identifier from calling-station-id + + + + + + Accept peer interface identifier + + + + + + + + + + -- cgit v1.2.3