From 3dba2d13e6ba7ced2a032b9fbb98984a44370f5f Mon Sep 17 00:00:00 2001 From: Daniil Baturin Date: Fri, 27 Jul 2018 01:17:25 +0200 Subject: T666, T616: new implementation of the VRRP CLI. --- interface-definitions/vrrp.xml | 255 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 255 insertions(+) create mode 100644 interface-definitions/vrrp.xml (limited to 'interface-definitions') diff --git a/interface-definitions/vrrp.xml b/interface-definitions/vrrp.xml new file mode 100644 index 000000000..72419efe9 --- /dev/null +++ b/interface-definitions/vrrp.xml @@ -0,0 +1,255 @@ + + + + + High availability settings + + + + + 800 + Virtual Router Redundancy Protocol settings + + + + + VRRP group + + + + + Network interface + + + + + + + + Advertise interval + + 1-255 + Advertise interval in seconds (default: 1) + + + + + + + + + VRRP authentication + + + + + VRRP password + + text + Password string (up to 8 characters) + + + .{1,8} + + Password must not be longer than 8 characters + + + + + Authentication type + + plaintext-password ah + + + (plaintext-password|ah) + + Authentication type must be plaintext-password or ah + + + + + + + Group description + + + + + + Disable VRRP group + + + + + Health check script + + + + + Health check failure count required for transition to fault (default: 3) + + + + + + + + Health check execution interval in seconds (default: 60) + + + + + + + + Health check script file + + + + + + + + + + VRRP hello source address (IPv4 or IPv6) + + + + + + <IPv4|IPv6> + IPv4 or IPv6 hello source address + + + + + + Unicast VRRP peer address (IPv4 or IPv6) + + + + + + <IPv4|IPv6> + IPv4 or IPv6 unicast peer address + + + + + + + Disable master preemption + + + + + Preempt delay (in seconds) + + + + + + + + Router priority + + + + + 1-255 + Router priority (default: 100) + + + + + + + Use VRRP virtual MAC address as per RFC3768 + + + + + VRRP transition scripts + + + + + Script to run on VRRP state transition to master + + + + + + + + Script to run on VRRP state transition to backup + + + + + + + + Script to run on VRRP state transition to fault + + + + + + + + + + + Virtual address (IPv4 or IPv6, but they must not be mixed in one group) + + + + + Virtual address must be a valid IPv4 or IPv6 address with prefix length (e.g. 192.0.2.3/24 or 2001:db8:ff::10/64) + + <IPv4|IPv6> + IPv4 or IPv6 virtual address + + + + + + Virtual router identifier + + + + + 1-255 + Virtual router identifier + + + + + + + + VRRP sync group + + + + + + Sync group member + + text + VRRP group name + + + high-availability vrrp group + + + + + + + + + + -- cgit v1.2.3