From 49bc3f1e3ff8416908fc986bb60b444a75a1722d Mon Sep 17 00:00:00 2001 From: Christian Poessinger Date: Sun, 28 Feb 2021 12:17:28 +0100 Subject: vif: T3349: use fixed ordering when enabling parent and child interface When a VIF/VLAN interface is placed in admin down state but the lower interface, serving the vlan, is moved from admin down -> admin up, all its vlan interfaces will be placed in admin up state, too. This is bad as a VLAN interface will become admin up even if its specified as admin down after a reboot. To reproduce: set interfaces ethernet eth1 vif 20 disable set interfaces ethernet eth1 disable commit delete interfaces ethernet eth1 disable commit Now check the interface state and it returns UP,LOWER_UP 7: eth1.20@eth1: mtu 1500 qdisc noqueue state UP group default qlen 1000 link/ether 00:50:56:b3:09:07 brd ff:ff:ff:ff:ff:ff inet6 fe80::250:56ff:feb3:907/64 scope link valid_lft forever preferred_lft forever --- python/vyos/ifconfig/ethernet.py | 14 ++------------ 1 file changed, 2 insertions(+), 12 deletions(-) (limited to 'python/vyos/ifconfig/ethernet.py') diff --git a/python/vyos/ifconfig/ethernet.py b/python/vyos/ifconfig/ethernet.py index aca0aeead..b89ca5a5c 100644 --- a/python/vyos/ifconfig/ethernet.py +++ b/python/vyos/ifconfig/ethernet.py @@ -318,9 +318,6 @@ class EthernetIf(Interface): interface setup code and provide a single point of entry when workin on any interface. """ - # call base class first - super().update(config) - # disable ethernet flow control (pause frames) value = 'off' if 'disable_flow_control' in config else 'on' self.set_flow_control(value) @@ -354,12 +351,5 @@ class EthernetIf(Interface): for b_type in config['ring_buffer']: self.set_ring_buffer(b_type, config['ring_buffer'][b_type]) - # Enable/Disable of an interface must always be done at the end of the - # derived class to make use of the ref-counting set_admin_state() - # function. We will only enable the interface if 'up' was called as - # often as 'down'. This is required by some interface implementations - # as certain parameters can only be changed when the interface is - # in admin-down state. This ensures the link does not flap during - # reconfiguration. - state = 'down' if 'disable' in config else 'up' - self.set_admin_state(state) + # call base class first + super().update(config) -- cgit v1.2.3