From 1a85e758b105d493bb9d95916816bd206345bc5d Mon Sep 17 00:00:00 2001 From: Christian Poessinger <christian@poessinger.com> Date: Tue, 21 Jul 2020 15:59:06 +0200 Subject: vyos.util: add common helper to load kernel modules l2tpv3, wireguard, wirelessmodem, nat all require additional Kernel modules to be present on the system. Each and every interface implemented their own way of loading a module - by copying code. Use a generic function, vyos.util.check_kmod() to load any arbitrary kernel module passed as string or list. --- python/vyos/util.py | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'python/vyos') diff --git a/python/vyos/util.py b/python/vyos/util.py index 924df6b3a..7234be6cb 100644 --- a/python/vyos/util.py +++ b/python/vyos/util.py @@ -652,3 +652,12 @@ def get_bridge_member_config(conf, br, intf): conf.set_level(old_level) return memberconf + +def check_kmod(k_mod): + """ Common utility function to load required kernel modules on demand """ + if isinstance(k_mod, str): + k_mod = k_mod.split() + for module in k_mod: + if not os.path.exists(f'/sys/module/{module}'): + if call(f'modprobe {module}') != 0: + raise ConfigError(f'Loading Kernel module {module} failed') -- cgit v1.2.3 From ebefa38b9fa946fde82a4c9b55122c037598143b Mon Sep 17 00:00:00 2001 From: Christian Poessinger <christian@poessinger.com> Date: Wed, 1 Jul 2020 19:06:52 +0200 Subject: ethernet: ifconfig: T2653: move to get_config_dict() The current VyOS CLI parser code written in Python contains a ton of duplicates which I can also hold myself accountable for - or maybe mainly me - depends on the angle of judge. While providing a new update() method in vyos.ifconfig.interfaces() this is extended for ethernet based interfaces which also supports 802.1q, 802.1ad VLANs. This commit migrates the existing codebase for an ethernet based interfaces and implements the missing parts for VLANs. Adding or migrating other interfaces (e.g. bridge or bond) will become much easier as they must reuse the entire functionality - we now walk towards a single codepath. Thanks for all who made this combined effort possible! Signed-off-by: Christian Poessinger <christian@poessinger.com> --- interface-definitions/interfaces-ethernet.xml.in | 2 + python/vyos/configdict.py | 29 +- python/vyos/configverify.py | 53 +++- python/vyos/ifconfig/ethernet.py | 101 ++++++- python/vyos/ifconfig/interface.py | 106 +++++++- python/vyos/ifconfig_vlan.py | 24 ++ src/conf_mode/interfaces-ethernet.py | 329 +++++------------------ 7 files changed, 371 insertions(+), 273 deletions(-) (limited to 'python/vyos') diff --git a/interface-definitions/interfaces-ethernet.xml.in b/interface-definitions/interfaces-ethernet.xml.in index 1e32a15f8..e8f3f09f1 100644 --- a/interface-definitions/interfaces-ethernet.xml.in +++ b/interface-definitions/interfaces-ethernet.xml.in @@ -56,6 +56,7 @@ </constraint> <constraintErrorMessage>duplex must be auto, half or full</constraintErrorMessage> </properties> + <defaultValue>auto</defaultValue> </leafNode> #include <include/interface-hw-id.xml.i> <node name="ip"> @@ -265,6 +266,7 @@ </constraint> <constraintErrorMessage>Speed must be auto, 10, 100, 1000, 2500, 5000, 10000, 25000, 40000, 50000 or 100000</constraintErrorMessage> </properties> + <defaultValue>auto</defaultValue> </leafNode> #include <include/vif-s.xml.i> #include <include/vif.xml.i> diff --git a/python/vyos/configdict.py b/python/vyos/configdict.py index 0dc7578d8..682caed8f 100644 --- a/python/vyos/configdict.py +++ b/python/vyos/configdict.py @@ -102,12 +102,35 @@ def dict_merge(source, destination): return tmp def list_diff(first, second): - """ - Diff two dictionaries and return only unique items - """ + """ Diff two dictionaries and return only unique items """ second = set(second) return [item for item in first if item not in second] +def T2665_default_dict_cleanup(dict): + """ Cleanup default keys for tag nodes https://phabricator.vyos.net/T2665. """ + # Cleanup + for vif in ['vif', 'vif_s']: + if vif in dict.keys(): + for key in ['ip', 'mtu']: + if key in dict[vif].keys(): + del dict[vif][key] + + # cleanup VIF-S defaults + if 'vif_c' in dict[vif].keys(): + for key in ['ip', 'mtu']: + if key in dict[vif]['vif_c'].keys(): + del dict[vif]['vif_c'][key] + # If there is no vif-c defined and we just cleaned the default + # keys - we can clean the entire vif-c dict as it's useless + if not dict[vif]['vif_c']: + del dict[vif]['vif_c'] + + # If there is no real vif/vif-s defined and we just cleaned the default + # keys - we can clean the entire vif dict as it's useless + if not dict[vif]: + del dict[vif] + + return dict def get_ethertype(ethertype_val): if ethertype_val == '0x88A8': diff --git a/python/vyos/configverify.py b/python/vyos/configverify.py index 32129a048..36b10c956 100644 --- a/python/vyos/configverify.py +++ b/python/vyos/configverify.py @@ -41,14 +41,14 @@ def verify_vrf(config): def verify_address(config): """ - Common helper function used by interface implementations to - perform recurring validation of IP address assignmenr - when interface also is part of a bridge. + Common helper function used by interface implementations to perform + recurring validation of IP address assignment when interface is part + of a bridge or bond. """ if {'is_bridge_member', 'address'} <= set(config): raise ConfigError( - f'Cannot assign address to interface "{ifname}" as it is a ' - f'member of bridge "{is_bridge_member}"!'.format(**config)) + 'Cannot assign address to interface "{ifname}" as it is a ' + 'member of bridge "{is_bridge_member}"!'.format(**config)) def verify_bridge_delete(config): @@ -62,6 +62,15 @@ def verify_bridge_delete(config): 'Interface "{ifname}" cannot be deleted as it is a ' 'member of bridge "{is_bridge_member}"!'.format(**config)) +def verify_interface_exists(config): + """ + Common helper function used by interface implementations to perform + recurring validation if an interface actually exists. + """ + from netifaces import interfaces + if not config['ifname'] in interfaces(): + raise ConfigError(f'Interface "{ifname}" does not exist!' + .format(**config)) def verify_source_interface(config): """ @@ -76,3 +85,37 @@ def verify_source_interface(config): if not config['source_interface'] in interfaces(): raise ConfigError(f'Source interface {source_interface} does not ' f'exist'.format(**config)) + +def verify_dhcpv6(config): + """ + Common helper function used by interface implementations to perform + recurring validation of DHCPv6 options which are mutually exclusive. + """ + if {'parameters_only', 'temporary'} <= set(config.get('dhcpv6_options', {})): + raise ConfigError('DHCPv6 temporary and parameters-only options ' + 'are mutually exclusive!') + +def verify_vlan_config(config): + """ + Common helper function used by interface implementations to perform + recurring validation of interface VLANs + """ + # 802.1q VLANs + for vlan in config.get('vif', {}).keys(): + vlan = config['vif'][vlan] + verify_dhcpv6(vlan) + verify_address(vlan) + verify_vrf(vlan) + + # 802.1ad (Q-in-Q) VLANs + for vlan in config.get('vif_s', {}).keys(): + vlan = config['vif_s'][vlan] + verify_dhcpv6(vlan) + verify_address(vlan) + verify_vrf(vlan) + + for vlan in config.get('vif_s', {}).get('vif_c', {}).keys(): + vlan = config['vif_c'][vlan] + verify_dhcpv6(vlan) + verify_address(vlan) + verify_vrf(vlan) diff --git a/python/vyos/ifconfig/ethernet.py b/python/vyos/ifconfig/ethernet.py index 5b18926c9..8a50a8699 100644 --- a/python/vyos/ifconfig/ethernet.py +++ b/python/vyos/ifconfig/ethernet.py @@ -15,13 +15,14 @@ import os import re +import jmespath +from vyos.configdict import get_ethertype from vyos.ifconfig.interface import Interface from vyos.ifconfig.vlan import VLAN from vyos.validate import assert_list from vyos.util import run - @Interface.register @VLAN.enable class EthernetIf(Interface): @@ -252,3 +253,101 @@ class EthernetIf(Interface): >>> i.set_udp_offload('on') """ return self.set_interface('ufo', state) + + + def update(self, config): + """ General helper function which works on a dictionary retrived by + get_config_dict(). It's main intention is to consolidate the scattered + interface setup code and provide a single point of entry when workin + on any interface. """ + + # now call the regular function from within our base class + super().update(config) + + # disable ethernet flow control (pause frames) + value = 'off' if 'disable_flow_control' in config.keys() else 'on' + self.set_flow_control(value) + + # GRO (generic receive offload) + tmp = jmespath.search('offload_options.generic_receive', config) + value = tmp if (tmp != None) else 'off' + self.set_gro(value) + + # GSO (generic segmentation offload) + tmp = jmespath.search('offload_options.generic_segmentation', config) + value = tmp if (tmp != None) else 'off' + self.set_gso(value) + + # scatter-gather option + tmp = jmespath.search('offload_options.scatter_gather', config) + value = tmp if (tmp != None) else 'off' + self.set_sg(value) + + # TSO (TCP segmentation offloading) + tmp = jmespath.search('offload_options.udp_fragmentation', config) + value = tmp if (tmp != None) else 'off' + self.set_tso(value) + + # UDP fragmentation offloading + tmp = jmespath.search('offload_options.udp_fragmentation', config) + value = tmp if (tmp != None) else 'off' + self.set_ufo(value) + + # Set physical interface speed and duplex + if {'speed', 'duplex'} <= set(config): + speed = config.get('speed') + duplex = config.get('duplex') + self.set_speed_duplex(speed, duplex) + + # Delete old IPv6 EUI64 addresses before changing MAC + + # Change interface MAC address - re-set to real hardware address (hw-id) + # if custom mac is removed. Skip if bond member. + if 'is_bond_member' not in config: + mac = config.get('hw_id') + if 'mac' in config: + mac = config.get('mac') + if mac: + self.set_mac(mac) + + # Add IPv6 EUI-based addresses + tmp = jmespath.search('ipv6.address.eui64', config) + if tmp: + # XXX: T2636 workaround: convert string to a list with one element + if isinstance(tmp, str): + tmp = [tmp] + for addr in tmp: + self.add_ipv6_eui64_address(addr) + + # re-add ourselves to any bridge we might have fallen out of + if 'is_bridge_member' in config: + bridge = config.get('is_bridge_member') + self.add_to_bridge(bridge) + + # remove no longer required 802.1ad (Q-in-Q VLANs) + for vif_s_id in config.get('vif_s_remove', {}): + self.del_vlan(vif_s_id) + + # create/update 802.1ad (Q-in-Q VLANs) + for vif_s_id, vif_s in config.get('vif_s', {}).items(): + tmp=get_ethertype(vif_s.get('ethertype', '0x88A8')) + s_vlan = self.add_vlan(vif_s_id, ethertype=tmp) + s_vlan.update(vif_s) + + # remove no longer required client VLAN (vif-c) + for vif_c_id in vif_s.get('vif_c_remove', {}): + s_vlan.del_vlan(vif_c_id) + + # create/update client VLAN (vif-c) interface + for vif_c_id, vif_c in vif_s.get('vif_c', {}).items(): + c_vlan = s_vlan.add_vlan(vif_c_id) + c_vlan.update(vif_c) + + # remove no longer required 802.1q VLAN interfaces + for vif_id in config.get('vif_remove', {}): + self.del_vlan(vif_id) + + # create/update 802.1q VLAN interfaces + for vif_id, vif in config.get('vif', {}).items(): + vlan = self.add_vlan(vif_id) + vlan.update(vif) diff --git a/python/vyos/ifconfig/interface.py b/python/vyos/ifconfig/interface.py index 8d7b247fc..689faa22b 100644 --- a/python/vyos/ifconfig/interface.py +++ b/python/vyos/ifconfig/interface.py @@ -16,6 +16,7 @@ import os import re import json +import jmespath from copy import deepcopy from ipaddress import IPv4Network @@ -322,11 +323,11 @@ class Interface(Control): self.set_admin_state('down') self.set_interface('mac', mac) - + # Turn an interface to the 'up' state if it was changed to 'down' by this fucntion if prev_state == 'up': self.set_admin_state('up') - + def set_vrf(self, vrf=''): """ Add/Remove interface from given VRF instance. @@ -773,14 +774,17 @@ class Interface(Control): on any interface. """ # Update interface description - self.set_alias(config.get('description', None)) + self.set_alias(config.get('description', '')) + + # Ignore link state changes + value = '2' if 'disable_link_detect' in config else '1' + self.set_link_detect(value) # Configure assigned interface IP addresses. No longer # configured addresses will be removed first new_addr = config.get('address', []) - # XXX workaround for T2636, convert IP address string to a list - # with one element + # XXX: T2636 workaround: convert string to a list with one element if isinstance(new_addr, str): new_addr = [new_addr] @@ -800,6 +804,96 @@ class Interface(Control): # Bind interface instance into VRF self.set_vrf(config.get('vrf', '')) + # DHCP options + if 'dhcp_options' in config: + dhcp_options = config.get('dhcp_options') + if 'client_id' in dhcp_options: + self.dhcp.v4.options['client_id'] = dhcp_options.get('client_id') + + if 'host_name' in dhcp_options: + self.dhcp.v4.options['hostname'] = dhcp_options.get('host_name') + + if 'vendor_class_id' in dhcp_options: + self.dhcp.v4.options['vendor_class_id'] = dhcp_options.get('vendor_class_id') + + # DHCPv6 options + if 'dhcpv6_options' in config: + dhcpv6_options = config.get('dhcpv6_options') + if 'parameters_only' in dhcpv6_options: + self.dhcp.v6.options['dhcpv6_prm_only'] = True + + if 'temporary' in dhcpv6_options: + self.dhcp.v6.options['dhcpv6_temporary'] = True + + if 'prefix_delegation' in dhcpv6_options: + prefix_delegation = dhcpv6_options.get('prefix_delegation') + if 'length' in prefix_delegation: + self.dhcp.v6.options['dhcpv6_pd_length'] = prefix_delegation.get('length') + + if 'interface' in prefix_delegation: + self.dhcp.v6.options['dhcpv6_pd_interfaces'] = prefix_delegation.get('interface') + + # Configure ARP cache timeout in milliseconds - has default value + tmp = jmespath.search('ip.arp_cache_timeout', config) + value = tmp if (tmp != None) else '30' + self.set_arp_cache_tmo(value) + + # Configure ARP filter configuration + tmp = jmespath.search('ip.disable_arp_filter', config) + value = '0' if (tmp != None) else '1' + self.set_arp_filter(value) + + # Configure ARP accept + tmp = jmespath.search('ip.enable_arp_accept', config) + value = '1' if (tmp != None) else '0' + self.set_arp_accept(value) + + # Configure ARP announce + tmp = jmespath.search('ip.enable_arp_announce', config) + value = '1' if (tmp != None) else '0' + self.set_arp_announce(value) + + # Configure ARP ignore + tmp = jmespath.search('ip.enable_arp_ignore', config) + value = '1' if (tmp != None) else '0' + self.set_arp_ignore(value) + + # Enable proxy-arp on this interface + tmp = jmespath.search('ip.enable_proxy_arp', config) + value = '1' if (tmp != None) else '0' + self.set_proxy_arp(value) + + # Enable private VLAN proxy ARP on this interface + tmp = jmespath.search('ip.proxy_arp_pvlan', config) + value = '1' if (tmp != None) else '0' + self.set_proxy_arp_pvlan(value) + + # IPv6 forwarding + tmp = jmespath.search('ipv6.disable_forwarding', config) + value = '0' if (tmp != None) else '1' + self.set_ipv6_forwarding(value) + + # IPv6 router advertisements + tmp = jmespath.search('ipv6.address.autoconf', config) + value = '2' if (tmp != None) else '1' + if 'dhcpv6' in new_addr: + value = '2' + self.set_ipv6_accept_ra(value) + + # IPv6 address autoconfiguration + tmp = jmespath.search('ipv6.address.autoconf', config) + value = '1' if (tmp != None) else '0' + self.set_ipv6_autoconf(value) + + # IPv6 Duplicate Address Detection (DAD) tries + tmp = jmespath.search('ipv6.dup_addr_detect_transmits', config) + value = tmp if (tmp != None) else '1' + self.set_ipv6_dad_messages(value) + + # MTU - Maximum Transfer Unit + if 'mtu' in config: + self.set_mtu(config.get('mtu')) + # Interface administrative state - state = 'down' if 'disable' in config.keys() else 'up' + state = 'down' if 'disable' in config else 'up' self.set_admin_state(state) diff --git a/python/vyos/ifconfig_vlan.py b/python/vyos/ifconfig_vlan.py index 442cb0db8..ecb6796fa 100644 --- a/python/vyos/ifconfig_vlan.py +++ b/python/vyos/ifconfig_vlan.py @@ -16,6 +16,30 @@ from netifaces import interfaces from vyos import ConfigError +def get_removed_vlans(conf, dict): + """ + Common function to parse a dictionary retrieved via get_config_dict() and + determine any added/removed VLAN interfaces - be it 802.1q or Q-in-Q. + """ + from vyos.configdiff import get_config_diff, Diff + + # Check vif, vif-s/vif-c VLAN interfaces for removal + D = get_config_diff(conf, key_mangling=('-', '_')) + D.set_level(conf.get_level()) + # get_child_nodes() will return dict_keys(), mangle this into a list with PEP448 + keys = D.get_child_nodes_diff(['vif'], expand_nodes=Diff.DELETE)['delete'].keys() + dict['vif_remove'] = [*keys] + + # get_child_nodes() will return dict_keys(), mangle this into a list with PEP448 + keys = D.get_child_nodes_diff(['vif-s'], expand_nodes=Diff.DELETE)['delete'].keys() + dict['vif_s_remove'] = [*keys] + + for vif in dict.get('vif_s', {}).keys(): + keys = D.get_child_nodes_diff(['vif-s', vif, 'vif-c'], expand_nodes=Diff.DELETE)['delete'].keys() + dict['vif_s'][vif]['vif_c_remove'] = [*keys] + + return dict + def apply_all_vlans(intf, intfconfig): """ Function applies all VLANs to the passed interface. diff --git a/src/conf_mode/interfaces-ethernet.py b/src/conf_mode/interfaces-ethernet.py index 8b895c4d2..60aafae32 100755 --- a/src/conf_mode/interfaces-ethernet.py +++ b/src/conf_mode/interfaces-ethernet.py @@ -17,295 +17,108 @@ import os from sys import exit -from copy import deepcopy -from netifaces import interfaces +from vyos.config import Config +from vyos.configdict import dict_merge +from vyos.configdict import T2665_default_dict_cleanup +from vyos.configverify import verify_interface_exists +from vyos.configverify import verify_dhcpv6 +from vyos.configverify import verify_address +from vyos.configverify import verify_vrf +from vyos.configverify import verify_vlan_config from vyos.ifconfig import EthernetIf -from vyos.ifconfig_vlan import apply_all_vlans, verify_vlan_config -from vyos.configdict import list_diff, intf_to_dict, add_to_dict, interface_default_data +from vyos.ifconfig_vlan import get_removed_vlans from vyos.validate import is_member -from vyos.config import Config +from vyos.xml import defaults from vyos import ConfigError - from vyos import airbag airbag.enable() -default_config_data = { - **interface_default_data, - 'deleted': False, - 'duplex': 'auto', - 'flow_control': 'on', - 'hw_id': '', - 'ip_arp_cache_tmo': 30, - 'ip_proxy_arp_pvlan': 0, - 'is_bond_member': False, - 'intf': '', - 'offload_gro': 'off', - 'offload_gso': 'off', - 'offload_sg': 'off', - 'offload_tso': 'off', - 'offload_ufo': 'off', - 'speed': 'auto', - 'vif_s': {}, - 'vif_s_remove': [], - 'vif': {}, - 'vif_remove': [], - 'vrf': '' -} - def get_config(): + """ Retrive CLI config as dictionary. Dictionary can never be empty, + as at least the interface name will be added or a deleted flag """ + conf = Config() + # determine tagNode instance if 'VYOS_TAGNODE_VALUE' not in os.environ: raise ConfigError('Interface (VYOS_TAGNODE_VALUE) not specified') - ifname = os.environ['VYOS_TAGNODE_VALUE'] - conf = Config() - - # check if ethernet interface has been removed - cfg_base = ['interfaces', 'ethernet', ifname] - if not conf.exists(cfg_base): - eth = deepcopy(default_config_data) - eth['intf'] = ifname - eth['deleted'] = True - # we can not bail out early as ethernet interface can not be removed - # Kernel will complain with: RTNETLINK answers: Operation not supported. - # Thus we need to remove individual settings - return eth - - # set new configuration level - conf.set_level(cfg_base) - - eth, disabled = intf_to_dict(conf, default_config_data) - - # disable ethernet flow control (pause frames) - if conf.exists('disable-flow-control'): - eth['flow_control'] = 'off' - - # retrieve real hardware address - if conf.exists('hw-id'): - eth['hw_id'] = conf.return_value('hw-id') - - # interface duplex - if conf.exists('duplex'): - eth['duplex'] = conf.return_value('duplex') + # retrieve interface default values + base = ['interfaces', 'ethernet'] + default_values = defaults(base) - # ARP cache entry timeout in seconds - if conf.exists('ip arp-cache-timeout'): - eth['ip_arp_cache_tmo'] = int(conf.return_value('ip arp-cache-timeout')) - - # Enable private VLAN proxy ARP on this interface - if conf.exists('ip proxy-arp-pvlan'): - eth['ip_proxy_arp_pvlan'] = 1 - - # check if we are a member of any bond - eth['is_bond_member'] = is_member(conf, eth['intf'], 'bonding') - - # GRO (generic receive offload) - if conf.exists('offload-options generic-receive'): - eth['offload_gro'] = conf.return_value('offload-options generic-receive') - - # GSO (generic segmentation offload) - if conf.exists('offload-options generic-segmentation'): - eth['offload_gso'] = conf.return_value('offload-options generic-segmentation') - - # scatter-gather option - if conf.exists('offload-options scatter-gather'): - eth['offload_sg'] = conf.return_value('offload-options scatter-gather') - - # TSO (TCP segmentation offloading) - if conf.exists('offload-options tcp-segmentation'): - eth['offload_tso'] = conf.return_value('offload-options tcp-segmentation') - - # UDP fragmentation offloading - if conf.exists('offload-options udp-fragmentation'): - eth['offload_ufo'] = conf.return_value('offload-options udp-fragmentation') - - # interface speed - if conf.exists('speed'): - eth['speed'] = conf.return_value('speed') - - # remove default IPv6 link-local address if member of a bond - if eth['is_bond_member'] and 'fe80::/64' in eth['ipv6_eui64_prefix']: - eth['ipv6_eui64_prefix'].remove('fe80::/64') - eth['ipv6_eui64_prefix_remove'].append('fe80::/64') - - add_to_dict(conf, disabled, eth, 'vif', 'vif') - add_to_dict(conf, disabled, eth, 'vif-s', 'vif_s') - - return eth - - -def verify(eth): - if eth['deleted']: + ifname = os.environ['VYOS_TAGNODE_VALUE'] + base = base + [ifname] + # setup config level which is extracted in get_removed_vlans() + conf.set_level(base) + ethernet = conf.get_config_dict([], key_mangling=('-', '_'), get_first_key=True) + + # Check if interface has been removed + if ethernet == {}: + ethernet.update({'deleted' : ''}) + + # We have gathered the dict representation of the CLI, but there are + # default options which we need to update into the dictionary + # retrived. + ethernet = dict_merge(default_values, ethernet) + + # Add interface instance name into dictionary + ethernet.update({'ifname': ifname}) + + # Check if we are a member of a bridge device + bridge = is_member(conf, ifname, 'bridge') + if bridge: + tmp = {'is_bridge_member' : bridge} + ethernet.update(tmp) + + # Check if we are a member of a bond device + bond = is_member(conf, ifname, 'bonding') + if bond: + tmp = {'is_bond_member' : bond} + ethernet.update(tmp) + + ethernet = T2665_default_dict_cleanup( ethernet ) + # Check vif, vif-s/vif-c VLAN interfaces for removal + ethernet = get_removed_vlans( conf, ethernet ) + return ethernet + +def verify(ethernet): + if 'deleted' in ethernet.keys(): return None - if eth['intf'] not in interfaces(): - raise ConfigError(f"Interface ethernet {eth['intf']} does not exist") + verify_interface_exists(ethernet) - if eth['speed'] == 'auto': - if eth['duplex'] != 'auto': + if ethernet.get('speed', None) == 'auto': + if ethernet.get('duplex', None) != 'auto': raise ConfigError('If speed is hardcoded, duplex must be hardcoded, too') - if eth['duplex'] == 'auto': - if eth['speed'] != 'auto': + if ethernet.get('duplex', None) == 'auto': + if ethernet.get('speed', None) != 'auto': raise ConfigError('If duplex is hardcoded, speed must be hardcoded, too') - if eth['dhcpv6_prm_only'] and eth['dhcpv6_temporary']: - raise ConfigError('DHCPv6 temporary and parameters-only options are mutually exclusive!') + verify_dhcpv6(ethernet) + verify_address(ethernet) + verify_vrf(ethernet) - memberof = eth['is_bridge_member'] if eth['is_bridge_member'] else eth['is_bond_member'] - - if ( memberof - and ( eth['address'] - or eth['ipv6_eui64_prefix'] - or eth['ipv6_autoconf'] ) ): - raise ConfigError(( - f'Cannot assign address to interface "{eth["intf"]}" ' - f'as it is a member of "{memberof}"!')) - - if eth['vrf']: - if eth['vrf'] not in interfaces(): - raise ConfigError(f'VRF "{eth["vrf"]}" does not exist') - - if memberof: - raise ConfigError(( - f'Interface "{eth["intf"]}" cannot be member of VRF "{eth["vrf"]}" ' - f'and "{memberof}" at the same time!')) - - if eth['mac'] and eth['is_bond_member']: - print('WARNING: "mac {0}" command will be ignored because {1} is a part of {2}'\ - .format(eth['mac'], eth['intf'], eth['is_bond_member'])) + if {'is_bond_member', 'mac'} <= set(ethernet): + print(f'WARNING: changing mac address "{mac}" will be ignored as "{ifname}" ' + f'is a member of bond "{is_bond_member}"'.format(**ethernet)) # use common function to verify VLAN configuration - verify_vlan_config(eth) + verify_vlan_config(ethernet) return None -def generate(eth): +def generate(ethernet): return None -def apply(eth): - e = EthernetIf(eth['intf']) - if eth['deleted']: - # apply all vlans to interface (they need removing too) - apply_all_vlans(e, eth) - +def apply(ethernet): + e = EthernetIf(ethernet['ifname']) + if 'deleted' in ethernet.keys(): # delete interface e.remove() else: - # update interface description used e.g. within SNMP - e.set_alias(eth['description']) - - if eth['dhcp_client_id']: - e.dhcp.v4.options['client_id'] = eth['dhcp_client_id'] - - if eth['dhcp_hostname']: - e.dhcp.v4.options['hostname'] = eth['dhcp_hostname'] - - if eth['dhcp_vendor_class_id']: - e.dhcp.v4.options['vendor_class_id'] = eth['dhcp_vendor_class_id'] - - if eth['dhcpv6_prm_only']: - e.dhcp.v6.options['dhcpv6_prm_only'] = True - - if eth['dhcpv6_temporary']: - e.dhcp.v6.options['dhcpv6_temporary'] = True - - if eth['dhcpv6_pd_length']: - e.dhcp.v6.options['dhcpv6_pd_length'] = eth['dhcpv6_pd_length'] - - if eth['dhcpv6_pd_interfaces']: - e.dhcp.v6.options['dhcpv6_pd_interfaces'] = eth['dhcpv6_pd_interfaces'] - - # ignore link state changes - e.set_link_detect(eth['disable_link_detect']) - # disable ethernet flow control (pause frames) - e.set_flow_control(eth['flow_control']) - # configure ARP cache timeout in milliseconds - e.set_arp_cache_tmo(eth['ip_arp_cache_tmo']) - # configure ARP filter configuration - e.set_arp_filter(eth['ip_disable_arp_filter']) - # configure ARP accept - e.set_arp_accept(eth['ip_enable_arp_accept']) - # configure ARP announce - e.set_arp_announce(eth['ip_enable_arp_announce']) - # configure ARP ignore - e.set_arp_ignore(eth['ip_enable_arp_ignore']) - # Enable proxy-arp on this interface - e.set_proxy_arp(eth['ip_proxy_arp']) - # Enable private VLAN proxy ARP on this interface - e.set_proxy_arp_pvlan(eth['ip_proxy_arp_pvlan']) - # IPv6 accept RA - e.set_ipv6_accept_ra(eth['ipv6_accept_ra']) - # IPv6 address autoconfiguration - e.set_ipv6_autoconf(eth['ipv6_autoconf']) - # IPv6 forwarding - e.set_ipv6_forwarding(eth['ipv6_forwarding']) - # IPv6 Duplicate Address Detection (DAD) tries - e.set_ipv6_dad_messages(eth['ipv6_dup_addr_detect']) - - # Delete old IPv6 EUI64 addresses before changing MAC - for addr in eth['ipv6_eui64_prefix_remove']: - e.del_ipv6_eui64_address(addr) - - # Change interface MAC address - re-set to real hardware address (hw-id) - # if custom mac is removed. Skip if bond member. - if not eth['is_bond_member']: - if eth['mac']: - e.set_mac(eth['mac']) - elif eth['hw_id']: - e.set_mac(eth['hw_id']) - - # Add IPv6 EUI-based addresses - for addr in eth['ipv6_eui64_prefix']: - e.add_ipv6_eui64_address(addr) - - # Maximum Transmission Unit (MTU) - e.set_mtu(eth['mtu']) - - # GRO (generic receive offload) - e.set_gro(eth['offload_gro']) - - # GSO (generic segmentation offload) - e.set_gso(eth['offload_gso']) - - # scatter-gather option - e.set_sg(eth['offload_sg']) - - # TSO (TCP segmentation offloading) - e.set_tso(eth['offload_tso']) - - # UDP fragmentation offloading - e.set_ufo(eth['offload_ufo']) - - # Set physical interface speed and duplex - e.set_speed_duplex(eth['speed'], eth['duplex']) - - # Enable/Disable interface - if eth['disable']: - e.set_admin_state('down') - else: - e.set_admin_state('up') - - # Configure interface address(es) - # - not longer required addresses get removed first - # - newly addresses will be added second - for addr in eth['address_remove']: - e.del_addr(addr) - for addr in eth['address']: - e.add_addr(addr) - - # assign/remove VRF (ONLY when not a member of a bridge or bond, - # otherwise 'nomaster' removes it from it) - if not ( eth['is_bridge_member'] or eth['is_bond_member'] ): - e.set_vrf(eth['vrf']) - - # re-add ourselves to any bridge we might have fallen out of - if eth['is_bridge_member']: - e.add_to_bridge(eth['is_bridge_member']) - - # apply all vlans to interface - apply_all_vlans(e, eth) + e.update(ethernet) if __name__ == '__main__': -- cgit v1.2.3 From 2b1c3dc86fe4033030855d61bf453aa730b6c230 Mon Sep 17 00:00:00 2001 From: Christian Poessinger <christian@poessinger.com> Date: Sun, 19 Jul 2020 13:55:51 +0200 Subject: vlan: ifconfig: T2653: only enable interface when lower interface is up A VLAN interface can only be placed in admin up state when the lower interface is up, too. If this is not the case the operating system will throw and exception. --- python/vyos/ifconfig/interface.py | 32 ++++++++++++++++++++++++++++++-- 1 file changed, 30 insertions(+), 2 deletions(-) (limited to 'python/vyos') diff --git a/python/vyos/ifconfig/interface.py b/python/vyos/ifconfig/interface.py index 689faa22b..be3617f7d 100644 --- a/python/vyos/ifconfig/interface.py +++ b/python/vyos/ifconfig/interface.py @@ -17,7 +17,9 @@ import os import re import json import jmespath + from copy import deepcopy +from glob import glob from ipaddress import IPv4Network from ipaddress import IPv6Address @@ -73,8 +75,12 @@ class Interface(Control): _command_get = { 'admin_state': { 'shellcmd': 'ip -json link show dev {ifname}', - 'format': lambda j: 'up' if 'UP' in json.loads(j)[0]['flags'] else 'down', - } + 'format': lambda j: 'up' if 'UP' in jmespath.search('[*].flags | [0]', json.loads(j)) else 'down', + }, + 'vlan_protocol': { + 'shellcmd': 'ip -json -details link show dev {ifname}', + 'format': lambda j: jmespath.search('[*].linkinfo.info_data.protocol | [0]', json.loads(j)), + }, } _command_set = { @@ -544,6 +550,17 @@ class Interface(Control): """ self.set_interface('alias', ifalias) + def get_vlan_protocol(self): + """ + Retrieve VLAN protocol in use, this can be 802.1Q, 802.1ad or None + + Example: + >>> from vyos.ifconfig import Interface + >>> Interface('eth0.10').get_vlan_protocol() + '802.1Q' + """ + return self.get_interface('vlan_protocol') + def get_admin_state(self): """ Get interface administrative state. Function will return 'up' or 'down' @@ -565,6 +582,17 @@ class Interface(Control): >>> Interface('eth0').get_admin_state() 'down' """ + # A VLAN interface can only be placed in admin up state when + # the lower interface is up, too + if self.get_vlan_protocol(): + lower_interface = glob(f'/sys/class/net/{self.ifname}/lower*/flags')[0] + with open(lower_interface, 'r') as f: + flags = f.read() + # If parent is not up - bail out as we can not bring up the VLAN. + # Flags are defined in kernel source include/uapi/linux/if.h + if not int(flags, 16) & 1: + return None + return self.set_interface('admin_state', state) def set_proxy_arp(self, enable): -- cgit v1.2.3 From a25d7095e009469d8ef60b63deddd94d30921723 Mon Sep 17 00:00:00 2001 From: Christian Poessinger <christian@poessinger.com> Date: Sun, 19 Jul 2020 20:45:29 +0200 Subject: bridge: ifconfig: T2653: move to get_config_dict() The current VyOS CLI parser code written in Python contains a ton of duplicates which I can also hold myself accountable for - or maybe mainly me - depends on the angle of judge. While providing a new update() method in vyos.ifconfig.interfaces() this is extended for bridge interfaces in the derived bridge class. Signed-off-by: Christian Poessinger <christian@poessinger.com> --- interface-definitions/interfaces-bridge.xml.in | 7 + python/vyos/configdict.py | 97 ++++++ python/vyos/ifconfig/bridge.py | 68 +++- python/vyos/ifconfig/ethernet.py | 20 -- python/vyos/ifconfig/interface.py | 25 ++ python/vyos/ifconfig_vlan.py | 9 +- python/vyos/util.py | 2 +- src/conf_mode/interfaces-bridge.py | 413 +++++-------------------- src/conf_mode/interfaces-ethernet.py | 54 +--- 9 files changed, 296 insertions(+), 399 deletions(-) (limited to 'python/vyos') diff --git a/interface-definitions/interfaces-bridge.xml.in b/interface-definitions/interfaces-bridge.xml.in index 6b610e623..92356d696 100644 --- a/interface-definitions/interfaces-bridge.xml.in +++ b/interface-definitions/interfaces-bridge.xml.in @@ -32,6 +32,7 @@ <validator name="numeric" argument="--range 0-0 --range 10-1000000"/> </constraint> </properties> + <defaultValue>300</defaultValue> </leafNode> #include <include/interface-description.xml.i> #include <include/dhcp-options.xml.i> @@ -51,6 +52,7 @@ </constraint> <constraintErrorMessage>Forwarding delay must be between 0 and 200 seconds</constraintErrorMessage> </properties> + <defaultValue>14</defaultValue> </leafNode> <leafNode name="hello-time"> <properties> @@ -64,6 +66,7 @@ </constraint> <constraintErrorMessage>Bridge Hello interval must be between 1 and 10 seconds</constraintErrorMessage> </properties> + <defaultValue>2</defaultValue> </leafNode> <node name="igmp"> <properties> @@ -107,6 +110,7 @@ </constraint> <constraintErrorMessage>Bridge max aging value must be between 1 and 40 seconds</constraintErrorMessage> </properties> + <defaultValue>20</defaultValue> </leafNode> <node name="member"> <properties> @@ -133,6 +137,7 @@ </constraint> <constraintErrorMessage>Path cost value must be between 1 and 65535</constraintErrorMessage> </properties> + <defaultValue>100</defaultValue> </leafNode> <leafNode name="priority"> <properties> @@ -146,6 +151,7 @@ </constraint> <constraintErrorMessage>Port priority value must be between 0 and 63</constraintErrorMessage> </properties> + <defaultValue>32</defaultValue> </leafNode> </children> </tagNode> @@ -163,6 +169,7 @@ </constraint> <constraintErrorMessage>Bridge priority must be between 0 and 65535 (multiples of 4096)</constraintErrorMessage> </properties> + <defaultValue>32768</defaultValue> </leafNode> <leafNode name="stp"> <properties> diff --git a/python/vyos/configdict.py b/python/vyos/configdict.py index 682caed8f..4fca426cd 100644 --- a/python/vyos/configdict.py +++ b/python/vyos/configdict.py @@ -17,6 +17,7 @@ A library for retrieving value dicts from VyOS configs in a declarative fashion. """ +import jmespath from enum import Enum from copy import deepcopy @@ -132,6 +133,102 @@ def T2665_default_dict_cleanup(dict): return dict +def leaf_node_changed(conf, key): + """ + Check if a leaf node was altered. If it has been altered - values has been + changed, or it was added/removed, we will return the old value. If nothing + has been changed, None is returned + """ + from vyos.configdiff import get_config_diff + + D = get_config_diff(conf, key_mangling=('-', '_')) + D.set_level(conf.get_level()) + (new, old) = D.get_value_diff(key) + if new != old: + if isinstance(old, str): + return old + elif isinstance(old, list): + if isinstance(new, str): + new = [new] + elif isinstance(new, type(None)): + new = [] + return list_diff(old, new) + + return None + +def get_interface_dict(config, base, ifname): + """ + Common utility function to retrieve and mandgle the interfaces available + in CLI configuration. All interfaces have a common base ground where the + value retrival is identical - so it can and should be reused + + Will return a dictionary with the necessary interface configuration + """ + from vyos.xml import defaults + from vyos.ifconfig_vlan import get_removed_vlans + + # retrieve interface default values + default_values = defaults(base) + + # setup config level which is extracted in get_removed_vlans() + config.set_level(base + [ifname]) + dict = config.get_config_dict([], key_mangling=('-', '_'), get_first_key=True) + + # Check if interface has been removed + if dict == {}: + dict.update({'deleted' : ''}) + + # Add interface instance name into dictionary + dict.update({'ifname': ifname}) + + # We have gathered the dict representation of the CLI, but there are + # default options which we need to update into the dictionary + # retrived. + dict = dict_merge(default_values, dict) + + # Check if we are a member of a bridge device + bridge = is_member(config, ifname, 'bridge') + if bridge: + dict.update({'is_bridge_member' : bridge}) + + # Check if we are a member of a bond device + bond = is_member(config, ifname, 'bonding') + if bond: + dict.update({'is_bond_member' : bond}) + + mac = leaf_node_changed(config, ['mac']) + if mac: + dict.update({'mac_old' : mac}) + + eui64 = leaf_node_changed(config, ['ipv6', 'address', 'eui64']) + if eui64: + # XXX: T2636 workaround: convert string to a list with one element + if isinstance(eui64, str): + eui64 = [eui64] + tmp = jmespath.search('ipv6.address', dict) + if not tmp: + dict.update({'ipv6': {'address': {'eui64_old': eui64}}}) + else: + dict['ipv6']['address'].update({'eui64_old': eui64}) + + # remove wrongly inserted values + dict = T2665_default_dict_cleanup(dict) + + # The values are identical for vif, vif-s and vif-c as the all include the same + # XML definitions which hold the defaults + default_vif_values = defaults(base + ['vif']) + for vif, vif_config in dict.get('vif', {}).items(): + vif_config.update(default_vif_values) + for vif_s, vif_s_config in dict.get('vif_s', {}).items(): + vif_s_config.update(default_vif_values) + for vif_c, vif_c_config in vif_s_config.get('vif_c', {}).items(): + vif_c_config.update(default_vif_values) + + # Check vif, vif-s/vif-c VLAN interfaces for removal + dict = get_removed_vlans(config, dict) + + return dict + def get_ethertype(ethertype_val): if ethertype_val == '0x88A8': return '802.1ad' diff --git a/python/vyos/ifconfig/bridge.py b/python/vyos/ifconfig/bridge.py index 44b92c1db..af950b35d 100644 --- a/python/vyos/ifconfig/bridge.py +++ b/python/vyos/ifconfig/bridge.py @@ -13,12 +13,13 @@ # You should have received a copy of the GNU Lesser General Public # License along with this library. If not, see <http://www.gnu.org/licenses/>. +import jmespath from vyos.ifconfig.interface import Interface - +from vyos.ifconfig.stp import STP from vyos.validate import assert_boolean from vyos.validate import assert_positive - +from vyos.util import cmd @Interface.register class BridgeIf(Interface): @@ -187,3 +188,66 @@ class BridgeIf(Interface): >>> BridgeIf('br0').del_port('eth1') """ return self.set_interface('del_port', interface) + + def update(self, config): + """ General helper function which works on a dictionary retrived by + get_config_dict(). It's main intention is to consolidate the scattered + interface setup code and provide a single point of entry when workin + on any interface. """ + + # now call the regular function from within our base class + super().update(config) + + # Set ageing time + value = config.get('aging') + self.set_ageing_time(value) + + # set bridge forward delay + value = config.get('forwarding_delay') + self.set_forward_delay(value) + + # set hello time + value = config.get('hello_time') + self.set_hello_time(value) + + # set max message age + value = config.get('max_age') + self.set_max_age(value) + + # set bridge priority + value = config.get('priority') + self.set_priority(value) + + # enable/disable spanning tree + value = '1' if 'stp' in config else '0' + self.set_stp(value) + + # enable or disable IGMP querier + tmp = jmespath.search('igmp.querier', config) + value = '1' if (tmp != None) else '0' + self.set_multicast_querier(value) + + # remove interface from bridge + tmp = jmespath.search('member.interface_remove', config) + if tmp: + for member in tmp: + self.del_port(member) + + STPBridgeIf = STP.enable(BridgeIf) + tmp = jmespath.search('member.interface', config) + if tmp: + for interface, interface_config in tmp.items(): + # if we've come here we already verified the interface doesn't + # have addresses configured so just flush any remaining ones + cmd(f'ip addr flush dev "{interface}"') + # enslave interface port to bridge + self.add_port(interface) + + tmp = STPBridgeIf(interface) + # set bridge port path cost + value = interface_config.get('cost') + tmp.set_path_cost(value) + + # set bridge port path priority + value = interface_config.get('priority') + tmp.set_path_priority(value) diff --git a/python/vyos/ifconfig/ethernet.py b/python/vyos/ifconfig/ethernet.py index 8a50a8699..1725116e2 100644 --- a/python/vyos/ifconfig/ethernet.py +++ b/python/vyos/ifconfig/ethernet.py @@ -299,26 +299,6 @@ class EthernetIf(Interface): duplex = config.get('duplex') self.set_speed_duplex(speed, duplex) - # Delete old IPv6 EUI64 addresses before changing MAC - - # Change interface MAC address - re-set to real hardware address (hw-id) - # if custom mac is removed. Skip if bond member. - if 'is_bond_member' not in config: - mac = config.get('hw_id') - if 'mac' in config: - mac = config.get('mac') - if mac: - self.set_mac(mac) - - # Add IPv6 EUI-based addresses - tmp = jmespath.search('ipv6.address.eui64', config) - if tmp: - # XXX: T2636 workaround: convert string to a list with one element - if isinstance(tmp, str): - tmp = [tmp] - for addr in tmp: - self.add_ipv6_eui64_address(addr) - # re-add ourselves to any bridge we might have fallen out of if 'is_bridge_member' in config: bridge = config.get('is_bridge_member') diff --git a/python/vyos/ifconfig/interface.py b/python/vyos/ifconfig/interface.py index be3617f7d..ea770af23 100644 --- a/python/vyos/ifconfig/interface.py +++ b/python/vyos/ifconfig/interface.py @@ -922,6 +922,31 @@ class Interface(Control): if 'mtu' in config: self.set_mtu(config.get('mtu')) + # Delete old IPv6 EUI64 addresses before changing MAC + tmp = jmespath.search('ipv6.address.eui64_old', config) + if tmp: + for addr in tmp: + self.del_ipv6_eui64_address(addr) + + # Change interface MAC address - re-set to real hardware address (hw-id) + # if custom mac is removed. Skip if bond member. + if 'is_bond_member' not in config: + mac = config.get('hw_id') + if 'mac' in config: + mac = config.get('mac') + if mac: + self.set_mac(mac) + + # Add IPv6 EUI-based addresses + tmp = jmespath.search('ipv6.address.eui64', config) + if tmp: + # XXX: T2636 workaround: convert string to a list with one element + if isinstance(tmp, str): + tmp = [tmp] + for addr in tmp: + self.add_ipv6_eui64_address(addr) + + # Interface administrative state state = 'down' if 'disable' in config else 'up' self.set_admin_state(state) diff --git a/python/vyos/ifconfig_vlan.py b/python/vyos/ifconfig_vlan.py index ecb6796fa..0e4ecda53 100644 --- a/python/vyos/ifconfig_vlan.py +++ b/python/vyos/ifconfig_vlan.py @@ -28,15 +28,18 @@ def get_removed_vlans(conf, dict): D.set_level(conf.get_level()) # get_child_nodes() will return dict_keys(), mangle this into a list with PEP448 keys = D.get_child_nodes_diff(['vif'], expand_nodes=Diff.DELETE)['delete'].keys() - dict['vif_remove'] = [*keys] + if keys: + dict.update({'vif_remove': [*keys]}) # get_child_nodes() will return dict_keys(), mangle this into a list with PEP448 keys = D.get_child_nodes_diff(['vif-s'], expand_nodes=Diff.DELETE)['delete'].keys() - dict['vif_s_remove'] = [*keys] + if keys: + dict.update({'vif_s_remove': [*keys]}) for vif in dict.get('vif_s', {}).keys(): keys = D.get_child_nodes_diff(['vif-s', vif, 'vif-c'], expand_nodes=Diff.DELETE)['delete'].keys() - dict['vif_s'][vif]['vif_c_remove'] = [*keys] + if keys: + dict.update({'vif_s': { vif : {'vif_c_remove': [*keys]}}}) return dict diff --git a/python/vyos/util.py b/python/vyos/util.py index 7234be6cb..7078762df 100644 --- a/python/vyos/util.py +++ b/python/vyos/util.py @@ -242,7 +242,7 @@ def chown(path, user, group): if not os.path.exists(path): return False - + uid = getpwnam(user).pw_uid gid = getgrnam(group).gr_gid os.chown(path, uid, gid) diff --git a/src/conf_mode/interfaces-bridge.py b/src/conf_mode/interfaces-bridge.py index 1e4fa5816..7998a251a 100755 --- a/src/conf_mode/interfaces-bridge.py +++ b/src/conf_mode/interfaces-bridge.py @@ -16,251 +16,116 @@ import os -from copy import deepcopy from sys import exit from netifaces import interfaces -from vyos.ifconfig import BridgeIf, Section -from vyos.ifconfig.stp import STP -from vyos.configdict import list_diff, interface_default_data -from vyos.validate import is_member, has_address_configured from vyos.config import Config -from vyos.util import cmd, get_bridge_member_config +from vyos.configdict import get_interface_dict +from vyos.configdiff import get_config_diff, Diff +from vyos.configverify import verify_dhcpv6 +from vyos.configverify import verify_vrf +from vyos.ifconfig import BridgeIf +from vyos.validate import is_member, has_address_configured +from vyos.xml import defaults + +from vyos.util import cmd from vyos import ConfigError from vyos import airbag airbag.enable() -default_config_data = { - **interface_default_data, - 'aging': 300, - 'arp_cache_tmo': 30, - 'deleted': False, - 'forwarding_delay': 14, - 'hello_time': 2, - 'igmp_querier': 0, - 'intf': '', - 'max_age': 20, - 'member': [], - 'member_remove': [], - 'priority': 32768, - 'stp': 0 -} +def get_removed_members(conf): + D = get_config_diff(conf, key_mangling=('-', '_')) + D.set_level(conf.get_level()) + # get_child_nodes() will return dict_keys(), mangle this into a list with PEP448 + keys = D.get_child_nodes_diff(['member', 'interface'], expand_nodes=Diff.DELETE)['delete'].keys() + return list(keys) def get_config(): - bridge = deepcopy(default_config_data) + """ + Retrive CLI config as dictionary. Dictionary can never be empty, as at least the + interface name will be added or a deleted flag + """ conf = Config() + base = ['interfaces', 'bridge'] # determine tagNode instance if 'VYOS_TAGNODE_VALUE' not in os.environ: raise ConfigError('Interface (VYOS_TAGNODE_VALUE) not specified') - bridge['intf'] = os.environ['VYOS_TAGNODE_VALUE'] - - # Check if bridge has been removed - if not conf.exists('interfaces bridge ' + bridge['intf']): - bridge['deleted'] = True - return bridge - - # set new configuration level - conf.set_level('interfaces bridge ' + bridge['intf']) - - # retrieve configured interface addresses - if conf.exists('address'): - bridge['address'] = conf.return_values('address') - - # Determine interface addresses (currently effective) - to determine which - # address is no longer valid and needs to be removed - eff_addr = conf.return_effective_values('address') - bridge['address_remove'] = list_diff(eff_addr, bridge['address']) - - # retrieve aging - how long addresses are retained - if conf.exists('aging'): - bridge['aging'] = int(conf.return_value('aging')) - - # retrieve interface description - if conf.exists('description'): - bridge['description'] = conf.return_value('description') - - # get DHCP client identifier - if conf.exists('dhcp-options client-id'): - bridge['dhcp_client_id'] = conf.return_value('dhcp-options client-id') - - # DHCP client host name (overrides the system host name) - if conf.exists('dhcp-options host-name'): - bridge['dhcp_hostname'] = conf.return_value('dhcp-options host-name') - - # DHCP client vendor identifier - if conf.exists('dhcp-options vendor-class-id'): - bridge['dhcp_vendor_class_id'] = conf.return_value('dhcp-options vendor-class-id') - - # DHCPv6 only acquire config parameters, no address - if conf.exists('dhcpv6-options parameters-only'): - bridge['dhcpv6_prm_only'] = True - - # DHCPv6 temporary IPv6 address - if conf.exists('dhcpv6-options temporary'): - bridge['dhcpv6_temporary'] = True - - # Disable this bridge interface - if conf.exists('disable'): - bridge['disable'] = True - - # Ignore link state changes - if conf.exists('disable-link-detect'): - bridge['disable_link_detect'] = 2 - - # Forwarding delay - if conf.exists('forwarding-delay'): - bridge['forwarding_delay'] = int(conf.return_value('forwarding-delay')) - - # Hello packet advertisment interval - if conf.exists('hello-time'): - bridge['hello_time'] = int(conf.return_value('hello-time')) - - # Enable Internet Group Management Protocol (IGMP) querier - if conf.exists('igmp querier'): - bridge['igmp_querier'] = 1 - - # ARP cache entry timeout in seconds - if conf.exists('ip arp-cache-timeout'): - bridge['arp_cache_tmo'] = int(conf.return_value('ip arp-cache-timeout')) - - # ARP filter configuration - if conf.exists('ip disable-arp-filter'): - bridge['ip_disable_arp_filter'] = 0 - - # ARP enable accept - if conf.exists('ip enable-arp-accept'): - bridge['ip_enable_arp_accept'] = 1 - - # ARP enable announce - if conf.exists('ip enable-arp-announce'): - bridge['ip_enable_arp_announce'] = 1 - - # ARP enable ignore - if conf.exists('ip enable-arp-ignore'): - bridge['ip_enable_arp_ignore'] = 1 - - # Enable acquisition of IPv6 address using stateless autoconfig (SLAAC) - if conf.exists('ipv6 address autoconf'): - bridge['ipv6_autoconf'] = 1 - - # Get prefixes for IPv6 addressing based on MAC address (EUI-64) - if conf.exists('ipv6 address eui64'): - bridge['ipv6_eui64_prefix'] = conf.return_values('ipv6 address eui64') - - # Determine currently effective EUI64 addresses - to determine which - # address is no longer valid and needs to be removed - eff_addr = conf.return_effective_values('ipv6 address eui64') - bridge['ipv6_eui64_prefix_remove'] = list_diff(eff_addr, bridge['ipv6_eui64_prefix']) - - # Remove the default link-local address if set. - if conf.exists('ipv6 address no-default-link-local'): - bridge['ipv6_eui64_prefix_remove'].append('fe80::/64') - else: - # add the link-local by default to make IPv6 work - bridge['ipv6_eui64_prefix'].append('fe80::/64') - - # Disable IPv6 forwarding on this interface - if conf.exists('ipv6 disable-forwarding'): - bridge['ipv6_forwarding'] = 0 - - # IPv6 Duplicate Address Detection (DAD) tries - if conf.exists('ipv6 dup-addr-detect-transmits'): - bridge['ipv6_dup_addr_detect'] = int(conf.return_value('ipv6 dup-addr-detect-transmits')) - - # Media Access Control (MAC) address - if conf.exists('mac'): - bridge['mac'] = conf.return_value('mac') - - # Find out if MAC has changed - if so, we need to delete all IPv6 EUI64 addresses - # before re-adding them - if ( bridge['mac'] and bridge['intf'] in Section.interfaces(section='bridge') - and bridge['mac'] != BridgeIf(bridge['intf'], create=False).get_mac() ): - bridge['ipv6_eui64_prefix_remove'] += bridge['ipv6_eui64_prefix'] - - # to make IPv6 SLAAC and DHCPv6 work with forwarding=1, - # accept_ra must be 2 - if bridge['ipv6_autoconf'] or 'dhcpv6' in bridge['address']: - bridge['ipv6_accept_ra'] = 2 - - # Interval at which neighbor bridges are removed - if conf.exists('max-age'): - bridge['max_age'] = int(conf.return_value('max-age')) - - # Determine bridge member interface (currently configured) - for intf in conf.list_nodes('member interface'): - # defaults are stored in util.py (they can't be here as all interface - # scripts use the function) - memberconf = get_bridge_member_config(conf, bridge['intf'], intf) - if memberconf: - memberconf['name'] = intf - bridge['member'].append(memberconf) - - # Determine bridge member interface (currently effective) - to determine which - # interfaces is no longer assigend to the bridge and thus can be removed - eff_intf = conf.list_effective_nodes('member interface') - act_intf = conf.list_nodes('member interface') - bridge['member_remove'] = list_diff(eff_intf, act_intf) - - # Priority for this bridge - if conf.exists('priority'): - bridge['priority'] = int(conf.return_value('priority')) - - # Enable spanning tree protocol - if conf.exists('stp'): - bridge['stp'] = 1 - - # retrieve VRF instance - if conf.exists('vrf'): - bridge['vrf'] = conf.return_value('vrf') + ifname = os.environ['VYOS_TAGNODE_VALUE'] + bridge = get_interface_dict(conf, base, ifname) + + # determine which members have been removed + tmp = get_removed_members(conf) + if tmp: + if 'member' in bridge: + bridge['member'].update({'interface_remove': tmp }) + else: + bridge.update({'member': {'interface_remove': tmp }}) + + if 'member' in bridge and 'interface' in bridge['member']: + # XXX TT2665 we need a copy of the dict keys for iteration, else we will get: + # RuntimeError: dictionary changed size during iteration + for interface in list(bridge['member']['interface']): + for key in ['cost', 'priority']: + if interface == key: + del bridge['member']['interface'][key] + continue + + # the default dictionary is not properly paged into the dict (see T2665) + # thus we will ammend it ourself + default_member_values = defaults(base + ['member', 'interface']) + + for interface, interface_config in bridge['member']['interface'].items(): + interface_config.update(default_member_values) + + # Check if we are a member of another bridge device + tmp = is_member(conf, interface, 'bridge') + if tmp and tmp != ifname: + interface_config.update({'is_bridge_member' : tmp}) + + # Check if we are a member of a bond device + tmp = is_member(conf, interface, 'bonding') + if tmp: + interface_config.update({'is_bond_member' : tmp}) + + # Bridge members must not have an assigned address + tmp = has_address_configured(conf, interface) + if tmp: + interface_config.update({'has_address' : ''}) return bridge def verify(bridge): - if bridge['dhcpv6_prm_only'] and bridge['dhcpv6_temporary']: - raise ConfigError('DHCPv6 temporary and parameters-only options are mutually exclusive!') + if 'deleted' in bridge: + return None - vrf_name = bridge['vrf'] - if vrf_name and vrf_name not in interfaces(): - raise ConfigError(f'VRF "{vrf_name}" does not exist') + verify_dhcpv6(bridge) + verify_vrf(bridge) - conf = Config() - for intf in bridge['member']: - # the interface must exist prior adding it to a bridge - if intf['name'] not in interfaces(): - raise ConfigError(( - f'Cannot add nonexistent interface "{intf["name"]}" ' - f'to bridge "{bridge["intf"]}"')) + if 'member' in bridge: + member = bridge.get('member') + bridge_name = bridge['ifname'] + for interface, interface_config in member.get('interface', {}).items(): + error_msg = f'Can not add interface "{interface}" to bridge "{bridge_name}", ' - if intf['name'] == 'lo': - raise ConfigError('Loopback interface "lo" can not be added to a bridge') + if interface == 'lo': + raise ConfigError('Loopback interface "lo" can not be added to a bridge') - # bridge members aren't allowed to be members of another bridge - for br in conf.list_nodes('interfaces bridge'): - # it makes no sense to verify ourself in this case - if br == bridge['intf']: - continue + if interface not in interfaces(): + raise ConfigError(error_msg + 'it does not exist!') - tmp = conf.list_nodes(f'interfaces bridge {br} member interface') - if intf['name'] in tmp: - raise ConfigError(( - f'Cannot add interface "{intf["name"]}" to bridge ' - f'"{bridge["intf"]}", it is already a member of bridge "{br}"!')) + if 'is_bridge_member' in interface_config: + tmp = interface_config['is_bridge_member'] + raise ConfigError(error_msg + f'it is already a member of bridge "{tmp}"!') - # bridge members are not allowed to be bond members - tmp = is_member(conf, intf['name'], 'bonding') - if tmp: - raise ConfigError(( - f'Cannot add interface "{intf["name"]}" to bridge ' - f'"{bridge["intf"]}", it is already a member of bond "{tmp}"!')) + if 'is_bond_member' in interface_config: + tmp = interface_config['is_bond_member'] + raise ConfigError(error_msg + f'it is already a member of bond "{tmp}"!') - # bridge members must not have an assigned address - if has_address_configured(conf, intf['name']): - raise ConfigError(( - f'Cannot add interface "{intf["name"]}" to bridge ' - f'"{bridge["intf"]}", it has an address assigned!')) + if 'has_address' in interface_config: + raise ConfigError(error_msg + 'it has an address assigned!') return None @@ -268,120 +133,12 @@ def generate(bridge): return None def apply(bridge): - br = BridgeIf(bridge['intf']) - - if bridge['deleted']: + br = BridgeIf(bridge['ifname']) + if 'deleted' in bridge: # delete interface br.remove() else: - # enable interface - br.set_admin_state('up') - # set ageing time - br.set_ageing_time(bridge['aging']) - # set bridge forward delay - br.set_forward_delay(bridge['forwarding_delay']) - # set hello time - br.set_hello_time(bridge['hello_time']) - # configure ARP filter configuration - br.set_arp_filter(bridge['ip_disable_arp_filter']) - # configure ARP accept - br.set_arp_accept(bridge['ip_enable_arp_accept']) - # configure ARP announce - br.set_arp_announce(bridge['ip_enable_arp_announce']) - # configure ARP ignore - br.set_arp_ignore(bridge['ip_enable_arp_ignore']) - # IPv6 accept RA - br.set_ipv6_accept_ra(bridge['ipv6_accept_ra']) - # IPv6 address autoconfiguration - br.set_ipv6_autoconf(bridge['ipv6_autoconf']) - # IPv6 forwarding - br.set_ipv6_forwarding(bridge['ipv6_forwarding']) - # IPv6 Duplicate Address Detection (DAD) tries - br.set_ipv6_dad_messages(bridge['ipv6_dup_addr_detect']) - # set max message age - br.set_max_age(bridge['max_age']) - # set bridge priority - br.set_priority(bridge['priority']) - # turn stp on/off - br.set_stp(bridge['stp']) - # enable or disable IGMP querier - br.set_multicast_querier(bridge['igmp_querier']) - # update interface description used e.g. within SNMP - br.set_alias(bridge['description']) - - if bridge['dhcp_client_id']: - br.dhcp.v4.options['client_id'] = bridge['dhcp_client_id'] - - if bridge['dhcp_hostname']: - br.dhcp.v4.options['hostname'] = bridge['dhcp_hostname'] - - if bridge['dhcp_vendor_class_id']: - br.dhcp.v4.options['vendor_class_id'] = bridge['dhcp_vendor_class_id'] - - if bridge['dhcpv6_prm_only']: - br.dhcp.v6.options['dhcpv6_prm_only'] = True - - if bridge['dhcpv6_temporary']: - br.dhcp.v6.options['dhcpv6_temporary'] = True - - if bridge['dhcpv6_pd_length']: - br.dhcp.v6.options['dhcpv6_pd_length'] = br['dhcpv6_pd_length'] - - if bridge['dhcpv6_pd_interfaces']: - br.dhcp.v6.options['dhcpv6_pd_interfaces'] = br['dhcpv6_pd_interfaces'] - - # assign/remove VRF - br.set_vrf(bridge['vrf']) - - # Delete old IPv6 EUI64 addresses before changing MAC - # (adding members to a fresh bridge changes its MAC too) - for addr in bridge['ipv6_eui64_prefix_remove']: - br.del_ipv6_eui64_address(addr) - - # remove interface from bridge - for intf in bridge['member_remove']: - br.del_port(intf) - - # add interfaces to bridge - for member in bridge['member']: - # if we've come here we already verified the interface doesn't - # have addresses configured so just flush any remaining ones - cmd(f'ip addr flush dev "{member["name"]}"') - br.add_port(member['name']) - - # Change interface MAC address - if bridge['mac']: - br.set_mac(bridge['mac']) - - # Add IPv6 EUI-based addresses (must be done after adding the - # 1st bridge member or setting its MAC) - for addr in bridge['ipv6_eui64_prefix']: - br.add_ipv6_eui64_address(addr) - - # up/down interface - if bridge['disable']: - br.set_admin_state('down') - - # Configure interface address(es) - # - not longer required addresses get removed first - # - newly addresses will be added second - for addr in bridge['address_remove']: - br.del_addr(addr) - for addr in bridge['address']: - br.add_addr(addr) - - STPBridgeIf = STP.enable(BridgeIf) - # configure additional bridge member options - for member in bridge['member']: - i = STPBridgeIf(member['name']) - # configure ARP cache timeout - i.set_arp_cache_tmo(member['arp_cache_tmo']) - # ignore link state changes - i.set_link_detect(member['disable_link_detect']) - # set bridge port path cost - i.set_path_cost(member['cost']) - # set bridge port path priority - i.set_path_priority(member['priority']) + br.update(bridge) return None diff --git a/src/conf_mode/interfaces-ethernet.py b/src/conf_mode/interfaces-ethernet.py index 60aafae32..d43552e50 100755 --- a/src/conf_mode/interfaces-ethernet.py +++ b/src/conf_mode/interfaces-ethernet.py @@ -19,72 +19,36 @@ import os from sys import exit from vyos.config import Config -from vyos.configdict import dict_merge -from vyos.configdict import T2665_default_dict_cleanup +from vyos.configdict import get_interface_dict from vyos.configverify import verify_interface_exists from vyos.configverify import verify_dhcpv6 from vyos.configverify import verify_address from vyos.configverify import verify_vrf from vyos.configverify import verify_vlan_config from vyos.ifconfig import EthernetIf -from vyos.ifconfig_vlan import get_removed_vlans -from vyos.validate import is_member -from vyos.xml import defaults from vyos import ConfigError from vyos import airbag airbag.enable() def get_config(): - """ Retrive CLI config as dictionary. Dictionary can never be empty, - as at least the interface name will be added or a deleted flag """ + """ + Retrive CLI config as dictionary. Dictionary can never be empty, as at least the + interface name will be added or a deleted flag + """ conf = Config() + base = ['interfaces', 'ethernet'] # determine tagNode instance if 'VYOS_TAGNODE_VALUE' not in os.environ: raise ConfigError('Interface (VYOS_TAGNODE_VALUE) not specified') - # retrieve interface default values - base = ['interfaces', 'ethernet'] - default_values = defaults(base) - ifname = os.environ['VYOS_TAGNODE_VALUE'] - base = base + [ifname] - # setup config level which is extracted in get_removed_vlans() - conf.set_level(base) - ethernet = conf.get_config_dict([], key_mangling=('-', '_'), get_first_key=True) - - # Check if interface has been removed - if ethernet == {}: - ethernet.update({'deleted' : ''}) - - # We have gathered the dict representation of the CLI, but there are - # default options which we need to update into the dictionary - # retrived. - ethernet = dict_merge(default_values, ethernet) - - # Add interface instance name into dictionary - ethernet.update({'ifname': ifname}) - - # Check if we are a member of a bridge device - bridge = is_member(conf, ifname, 'bridge') - if bridge: - tmp = {'is_bridge_member' : bridge} - ethernet.update(tmp) - - # Check if we are a member of a bond device - bond = is_member(conf, ifname, 'bonding') - if bond: - tmp = {'is_bond_member' : bond} - ethernet.update(tmp) - - ethernet = T2665_default_dict_cleanup( ethernet ) - # Check vif, vif-s/vif-c VLAN interfaces for removal - ethernet = get_removed_vlans( conf, ethernet ) + ethernet = get_interface_dict(conf, base, ifname) return ethernet def verify(ethernet): - if 'deleted' in ethernet.keys(): + if 'deleted' in ethernet: return None verify_interface_exists(ethernet) @@ -114,7 +78,7 @@ def generate(ethernet): def apply(ethernet): e = EthernetIf(ethernet['ifname']) - if 'deleted' in ethernet.keys(): + if 'deleted' in ethernet: # delete interface e.remove() else: -- cgit v1.2.3 From 0e2304e0ec903a8183307b51f275097cd87a6995 Mon Sep 17 00:00:00 2001 From: Christian Poessinger <christian@poessinger.com> Date: Tue, 21 Jul 2020 21:57:26 +0200 Subject: ifconfig: T2653: move bridge member check to base class This test is reused by a lot of instances and thus must be moved to the base class. --- python/vyos/ifconfig/ethernet.py | 5 ----- python/vyos/ifconfig/interface.py | 4 ++++ 2 files changed, 4 insertions(+), 5 deletions(-) (limited to 'python/vyos') diff --git a/python/vyos/ifconfig/ethernet.py b/python/vyos/ifconfig/ethernet.py index 1725116e2..7641e82fd 100644 --- a/python/vyos/ifconfig/ethernet.py +++ b/python/vyos/ifconfig/ethernet.py @@ -299,11 +299,6 @@ class EthernetIf(Interface): duplex = config.get('duplex') self.set_speed_duplex(speed, duplex) - # re-add ourselves to any bridge we might have fallen out of - if 'is_bridge_member' in config: - bridge = config.get('is_bridge_member') - self.add_to_bridge(bridge) - # remove no longer required 802.1ad (Q-in-Q VLANs) for vif_s_id in config.get('vif_s_remove', {}): self.del_vlan(vif_s_id) diff --git a/python/vyos/ifconfig/interface.py b/python/vyos/ifconfig/interface.py index ea770af23..2d2017b7a 100644 --- a/python/vyos/ifconfig/interface.py +++ b/python/vyos/ifconfig/interface.py @@ -946,6 +946,10 @@ class Interface(Control): for addr in tmp: self.add_ipv6_eui64_address(addr) + # re-add ourselves to any bridge we might have fallen out of + if 'is_bridge_member' in config: + bridge = config.get('is_bridge_member') + self.add_to_bridge(bridge) # Interface administrative state state = 'down' if 'disable' in config else 'up' -- cgit v1.2.3 From 3ee6030b98f8afdbc3a606ce458e11323e59b23c Mon Sep 17 00:00:00 2001 From: Christian Poessinger <christian@poessinger.com> Date: Tue, 21 Jul 2020 22:08:22 +0200 Subject: vyos.configdict: T2653: add new reusable helper node_changed() This can be used to see if a tagNode has been changed. It will return a list of changed nodes. --- python/vyos/configdict.py | 18 +++++++++++++++--- src/conf_mode/interfaces-bridge.py | 11 ++--------- 2 files changed, 17 insertions(+), 12 deletions(-) (limited to 'python/vyos') diff --git a/python/vyos/configdict.py b/python/vyos/configdict.py index 4fca426cd..7f05a15ed 100644 --- a/python/vyos/configdict.py +++ b/python/vyos/configdict.py @@ -133,17 +133,16 @@ def T2665_default_dict_cleanup(dict): return dict -def leaf_node_changed(conf, key): +def leaf_node_changed(conf, path): """ Check if a leaf node was altered. If it has been altered - values has been changed, or it was added/removed, we will return the old value. If nothing has been changed, None is returned """ from vyos.configdiff import get_config_diff - D = get_config_diff(conf, key_mangling=('-', '_')) D.set_level(conf.get_level()) - (new, old) = D.get_value_diff(key) + (new, old) = D.get_value_diff(path) if new != old: if isinstance(old, str): return old @@ -156,6 +155,19 @@ def leaf_node_changed(conf, key): return None +def node_changed(conf, path): + """ + Check if a leaf node was altered. If it has been altered - values has been + changed, or it was added/removed, we will return the old value. If nothing + has been changed, None is returned + """ + from vyos.configdiff import get_config_diff, Diff + D = get_config_diff(conf, key_mangling=('-', '_')) + D.set_level(conf.get_level()) + # get_child_nodes() will return dict_keys(), mangle this into a list with PEP448 + keys = D.get_child_nodes_diff(path, expand_nodes=Diff.DELETE)['delete'].keys() + return list(keys) + def get_interface_dict(config, base, ifname): """ Common utility function to retrieve and mandgle the interfaces available diff --git a/src/conf_mode/interfaces-bridge.py b/src/conf_mode/interfaces-bridge.py index 7998a251a..9c43d1983 100755 --- a/src/conf_mode/interfaces-bridge.py +++ b/src/conf_mode/interfaces-bridge.py @@ -21,7 +21,7 @@ from netifaces import interfaces from vyos.config import Config from vyos.configdict import get_interface_dict -from vyos.configdiff import get_config_diff, Diff +from vyos.configdict import node_changed from vyos.configverify import verify_dhcpv6 from vyos.configverify import verify_vrf from vyos.ifconfig import BridgeIf @@ -34,13 +34,6 @@ from vyos import ConfigError from vyos import airbag airbag.enable() -def get_removed_members(conf): - D = get_config_diff(conf, key_mangling=('-', '_')) - D.set_level(conf.get_level()) - # get_child_nodes() will return dict_keys(), mangle this into a list with PEP448 - keys = D.get_child_nodes_diff(['member', 'interface'], expand_nodes=Diff.DELETE)['delete'].keys() - return list(keys) - def get_config(): """ Retrive CLI config as dictionary. Dictionary can never be empty, as at least the @@ -57,7 +50,7 @@ def get_config(): bridge = get_interface_dict(conf, base, ifname) # determine which members have been removed - tmp = get_removed_members(conf) + tmp = node_changed(conf, ['member', 'interface']) if tmp: if 'member' in bridge: bridge['member'].update({'interface_remove': tmp }) -- cgit v1.2.3 From 3998e140d13d99fde0c814816f4cf7533a38a61a Mon Sep 17 00:00:00 2001 From: Christian Poessinger <christian@poessinger.com> Date: Fri, 24 Jul 2020 17:15:55 +0200 Subject: ifconfig: T2653: implement update() in derived classes for admin up/down Every derived class must implement update() to set the interfaces admin up/down state. This is required to prevend extensive link flaps when e.g. reconfiguring bond interfaces. --- python/vyos/ifconfig/bridge.py | 12 +++++++++++- python/vyos/ifconfig/dummy.py | 19 +++++++++++++++++++ python/vyos/ifconfig/ethernet.py | 12 +++++++++++- python/vyos/ifconfig/interface.py | 3 --- python/vyos/ifconfig/loopback.py | 12 +++++++++++- python/vyos/ifconfig/macsec.py | 19 +++++++++++++++++++ python/vyos/ifconfig/macvlan.py | 19 +++++++++++++++++++ 7 files changed, 90 insertions(+), 6 deletions(-) (limited to 'python/vyos') diff --git a/python/vyos/ifconfig/bridge.py b/python/vyos/ifconfig/bridge.py index af950b35d..da4e1a289 100644 --- a/python/vyos/ifconfig/bridge.py +++ b/python/vyos/ifconfig/bridge.py @@ -195,7 +195,7 @@ class BridgeIf(Interface): interface setup code and provide a single point of entry when workin on any interface. """ - # now call the regular function from within our base class + # call base class first super().update(config) # Set ageing time @@ -251,3 +251,13 @@ class BridgeIf(Interface): # set bridge port path priority value = interface_config.get('priority') tmp.set_path_priority(value) + + # Enable/Disable of an interface must always be done at the end of the + # derived class to make use of the ref-counting set_admin_state() + # function. We will only enable the interface if 'up' was called as + # often as 'down'. This is required by some interface implementations + # as certain parameters can only be changed when the interface is + # in admin-down state. This ensures the link does not flap during + # reconfiguration. + state = 'down' if 'disable' in config else 'up' + self.set_admin_state(state) diff --git a/python/vyos/ifconfig/dummy.py b/python/vyos/ifconfig/dummy.py index 404c490c7..43614cd1c 100644 --- a/python/vyos/ifconfig/dummy.py +++ b/python/vyos/ifconfig/dummy.py @@ -35,3 +35,22 @@ class DummyIf(Interface): 'prefixes': ['dum', ], }, } + + def update(self, config): + """ General helper function which works on a dictionary retrived by + get_config_dict(). It's main intention is to consolidate the scattered + interface setup code and provide a single point of entry when workin + on any interface. """ + + # call base class first + super().update(config) + + # Enable/Disable of an interface must always be done at the end of the + # derived class to make use of the ref-counting set_admin_state() + # function. We will only enable the interface if 'up' was called as + # often as 'down'. This is required by some interface implementations + # as certain parameters can only be changed when the interface is + # in admin-down state. This ensures the link does not flap during + # reconfiguration. + state = 'down' if 'disable' in config else 'up' + self.set_admin_state(state) diff --git a/python/vyos/ifconfig/ethernet.py b/python/vyos/ifconfig/ethernet.py index 7641e82fd..77128633d 100644 --- a/python/vyos/ifconfig/ethernet.py +++ b/python/vyos/ifconfig/ethernet.py @@ -261,7 +261,7 @@ class EthernetIf(Interface): interface setup code and provide a single point of entry when workin on any interface. """ - # now call the regular function from within our base class + # call base class first super().update(config) # disable ethernet flow control (pause frames) @@ -326,3 +326,13 @@ class EthernetIf(Interface): for vif_id, vif in config.get('vif', {}).items(): vlan = self.add_vlan(vif_id) vlan.update(vif) + + # Enable/Disable of an interface must always be done at the end of the + # derived class to make use of the ref-counting set_admin_state() + # function. We will only enable the interface if 'up' was called as + # often as 'down'. This is required by some interface implementations + # as certain parameters can only be changed when the interface is + # in admin-down state. This ensures the link does not flap during + # reconfiguration. + state = 'down' if 'disable' in config else 'up' + self.set_admin_state(state) diff --git a/python/vyos/ifconfig/interface.py b/python/vyos/ifconfig/interface.py index 2d2017b7a..5942904b5 100644 --- a/python/vyos/ifconfig/interface.py +++ b/python/vyos/ifconfig/interface.py @@ -951,6 +951,3 @@ class Interface(Control): bridge = config.get('is_bridge_member') self.add_to_bridge(bridge) - # Interface administrative state - state = 'down' if 'disable' in config else 'up' - self.set_admin_state(state) diff --git a/python/vyos/ifconfig/loopback.py b/python/vyos/ifconfig/loopback.py index 7ebd13b54..2b4ebfdcc 100644 --- a/python/vyos/ifconfig/loopback.py +++ b/python/vyos/ifconfig/loopback.py @@ -75,5 +75,15 @@ class LoopbackIf(Interface): # Update IP address entry in our dictionary config.update({'address' : addr}) - # now call the regular function from within our base class + # call base class super().update(config) + + # Enable/Disable of an interface must always be done at the end of the + # derived class to make use of the ref-counting set_admin_state() + # function. We will only enable the interface if 'up' was called as + # often as 'down'. This is required by some interface implementations + # as certain parameters can only be changed when the interface is + # in admin-down state. This ensures the link does not flap during + # reconfiguration. + state = 'down' if 'disable' in config else 'up' + self.set_admin_state(state) diff --git a/python/vyos/ifconfig/macsec.py b/python/vyos/ifconfig/macsec.py index ea8c9807e..6f570d162 100644 --- a/python/vyos/ifconfig/macsec.py +++ b/python/vyos/ifconfig/macsec.py @@ -71,3 +71,22 @@ class MACsecIf(Interface): 'source_interface': '', } return config + + def update(self, config): + """ General helper function which works on a dictionary retrived by + get_config_dict(). It's main intention is to consolidate the scattered + interface setup code and provide a single point of entry when workin + on any interface. """ + + # call base class first + super().update(config) + + # Enable/Disable of an interface must always be done at the end of the + # derived class to make use of the ref-counting set_admin_state() + # function. We will only enable the interface if 'up' was called as + # often as 'down'. This is required by some interface implementations + # as certain parameters can only be changed when the interface is + # in admin-down state. This ensures the link does not flap during + # reconfiguration. + state = 'down' if 'disable' in config else 'up' + self.set_admin_state(state) diff --git a/python/vyos/ifconfig/macvlan.py b/python/vyos/ifconfig/macvlan.py index b5481f4a7..b068ce873 100644 --- a/python/vyos/ifconfig/macvlan.py +++ b/python/vyos/ifconfig/macvlan.py @@ -68,3 +68,22 @@ class MACVLANIf(Interface): >> dict = MACVLANIf().get_config() """ return deepcopy(cls.default) + + def update(self, config): + """ General helper function which works on a dictionary retrived by + get_config_dict(). It's main intention is to consolidate the scattered + interface setup code and provide a single point of entry when workin + on any interface. """ + + # call base class first + super().update(config) + + # Enable/Disable of an interface must always be done at the end of the + # derived class to make use of the ref-counting set_admin_state() + # function. We will only enable the interface if 'up' was called as + # often as 'down'. This is required by some interface implementations + # as certain parameters can only be changed when the interface is + # in admin-down state. This ensures the link does not flap during + # reconfiguration. + state = 'down' if 'disable' in config else 'up' + self.set_admin_state(state) -- cgit v1.2.3 From 0d21de93ce02fb0ae6e2e3ceb13dfd5b8dbe755f Mon Sep 17 00:00:00 2001 From: Christian Poessinger <christian@poessinger.com> Date: Fri, 24 Jul 2020 17:17:38 +0200 Subject: vyos.configdict: T2653: use dict_merge() over update() With dict.update() existing keys will get overwritten when blending in interface default values. --- python/vyos/configdict.py | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'python/vyos') diff --git a/python/vyos/configdict.py b/python/vyos/configdict.py index 7f05a15ed..f26b47e41 100644 --- a/python/vyos/configdict.py +++ b/python/vyos/configdict.py @@ -230,11 +230,11 @@ def get_interface_dict(config, base, ifname): # XML definitions which hold the defaults default_vif_values = defaults(base + ['vif']) for vif, vif_config in dict.get('vif', {}).items(): - vif_config.update(default_vif_values) + vif_config = dict_merge(default_vif_values, vif_config) for vif_s, vif_s_config in dict.get('vif_s', {}).items(): - vif_s_config.update(default_vif_values) + vif_s_config = dict_merge(default_vif_values, vif_s_config) for vif_c, vif_c_config in vif_s_config.get('vif_c', {}).items(): - vif_c_config.update(default_vif_values) + vif_c_config = dict_merge(default_vif_values, vif_c_config) # Check vif, vif-s/vif-c VLAN interfaces for removal dict = get_removed_vlans(config, dict) -- cgit v1.2.3 From add7eaebe7b8ebd4e143eb939d3ba7871ead0502 Mon Sep 17 00:00:00 2001 From: Christian Poessinger <christian@poessinger.com> Date: Fri, 24 Jul 2020 17:18:45 +0200 Subject: ifconfig: T2653: move vlan configuration code to base class This is required as other interfaces (e.g. pseudo-ethernet or bond) will have VLANs, too. --- python/vyos/ifconfig/ethernet.py | 29 ----------------------------- python/vyos/ifconfig/interface.py | 28 ++++++++++++++++++++++++++++ 2 files changed, 28 insertions(+), 29 deletions(-) (limited to 'python/vyos') diff --git a/python/vyos/ifconfig/ethernet.py b/python/vyos/ifconfig/ethernet.py index 77128633d..b2f701e00 100644 --- a/python/vyos/ifconfig/ethernet.py +++ b/python/vyos/ifconfig/ethernet.py @@ -17,7 +17,6 @@ import os import re import jmespath -from vyos.configdict import get_ethertype from vyos.ifconfig.interface import Interface from vyos.ifconfig.vlan import VLAN from vyos.validate import assert_list @@ -299,34 +298,6 @@ class EthernetIf(Interface): duplex = config.get('duplex') self.set_speed_duplex(speed, duplex) - # remove no longer required 802.1ad (Q-in-Q VLANs) - for vif_s_id in config.get('vif_s_remove', {}): - self.del_vlan(vif_s_id) - - # create/update 802.1ad (Q-in-Q VLANs) - for vif_s_id, vif_s in config.get('vif_s', {}).items(): - tmp=get_ethertype(vif_s.get('ethertype', '0x88A8')) - s_vlan = self.add_vlan(vif_s_id, ethertype=tmp) - s_vlan.update(vif_s) - - # remove no longer required client VLAN (vif-c) - for vif_c_id in vif_s.get('vif_c_remove', {}): - s_vlan.del_vlan(vif_c_id) - - # create/update client VLAN (vif-c) interface - for vif_c_id, vif_c in vif_s.get('vif_c', {}).items(): - c_vlan = s_vlan.add_vlan(vif_c_id) - c_vlan.update(vif_c) - - # remove no longer required 802.1q VLAN interfaces - for vif_id in config.get('vif_remove', {}): - self.del_vlan(vif_id) - - # create/update 802.1q VLAN interfaces - for vif_id, vif in config.get('vif', {}).items(): - vlan = self.add_vlan(vif_id) - vlan.update(vif) - # Enable/Disable of an interface must always be done at the end of the # derived class to make use of the ref-counting set_admin_state() # function. We will only enable the interface if 'up' was called as diff --git a/python/vyos/ifconfig/interface.py b/python/vyos/ifconfig/interface.py index 5942904b5..1fe4f74f2 100644 --- a/python/vyos/ifconfig/interface.py +++ b/python/vyos/ifconfig/interface.py @@ -31,6 +31,7 @@ from netifaces import AF_INET6 from vyos import ConfigError from vyos.configdict import list_diff +from vyos.configdict import get_ethertype from vyos.util import mac2eui64 from vyos.validate import is_ipv4 from vyos.validate import is_ipv6 @@ -951,3 +952,30 @@ class Interface(Control): bridge = config.get('is_bridge_member') self.add_to_bridge(bridge) + # remove no longer required 802.1ad (Q-in-Q VLANs) + for vif_s_id in config.get('vif_s_remove', {}): + self.del_vlan(vif_s_id) + + # create/update 802.1ad (Q-in-Q VLANs) + for vif_s_id, vif_s in config.get('vif_s', {}).items(): + tmp=get_ethertype(vif_s.get('ethertype', '0x88A8')) + s_vlan = self.add_vlan(vif_s_id, ethertype=tmp) + s_vlan.update(vif_s) + + # remove no longer required client VLAN (vif-c) + for vif_c_id in vif_s.get('vif_c_remove', {}): + s_vlan.del_vlan(vif_c_id) + + # create/update client VLAN (vif-c) interface + for vif_c_id, vif_c in vif_s.get('vif_c', {}).items(): + c_vlan = s_vlan.add_vlan(vif_c_id) + c_vlan.update(vif_c) + + # remove no longer required 802.1q VLAN interfaces + for vif_id in config.get('vif_remove', {}): + self.del_vlan(vif_id) + + # create/update 802.1q VLAN interfaces + for vif_id, vif in config.get('vif', {}).items(): + vlan = self.add_vlan(vif_id) + vlan.update(vif) -- cgit v1.2.3 From f81b0443cf09c34cb1f2060094e3eb294b8fa192 Mon Sep 17 00:00:00 2001 From: Christian Poessinger <christian@poessinger.com> Date: Fri, 24 Jul 2020 17:20:50 +0200 Subject: bonding: ifconfig: T2653: move to get_config_dict() The current VyOS CLI parser code written in Python contains a ton of duplicates which I can also hold myself accountable for - or maybe mainly me - depends on the angle of judge. --- interface-definitions/interfaces-bonding.xml.in | 2 + python/vyos/ifconfig/bond.py | 118 ++++++- python/vyos/ifconfig/interface.py | 16 +- python/vyos/validate.py | 5 +- src/conf_mode/interfaces-bonding.py | 437 ++++++------------------ 5 files changed, 241 insertions(+), 337 deletions(-) (limited to 'python/vyos') diff --git a/interface-definitions/interfaces-bonding.xml.in b/interface-definitions/interfaces-bonding.xml.in index ddd52979b..7d658f6a0 100644 --- a/interface-definitions/interfaces-bonding.xml.in +++ b/interface-definitions/interfaces-bonding.xml.in @@ -78,6 +78,7 @@ </constraint> <constraintErrorMessage>hash-policy must be layer2 layer2+3 or layer3+4</constraintErrorMessage> </properties> + <defaultValue>layer2</defaultValue> </leafNode> <node name="ip"> <children> @@ -137,6 +138,7 @@ </constraint> <constraintErrorMessage>mode must be 802.3ad, active-backup, broadcast, round-robin, transmit-load-balance, adaptive-load-balance, or xor</constraintErrorMessage> </properties> + <defaultValue>802.3ad</defaultValue> </leafNode> <node name="member"> <properties> diff --git a/python/vyos/ifconfig/bond.py b/python/vyos/ifconfig/bond.py index 47dd4ff34..5a48ac632 100644 --- a/python/vyos/ifconfig/bond.py +++ b/python/vyos/ifconfig/bond.py @@ -14,14 +14,15 @@ # License along with this library. If not, see <http://www.gnu.org/licenses/>. import os +import jmespath from vyos.ifconfig.interface import Interface from vyos.ifconfig.vlan import VLAN +from vyos.util import cmd from vyos.validate import assert_list from vyos.validate import assert_positive - @Interface.register @VLAN.enable class BondIf(Interface): @@ -179,7 +180,13 @@ class BondIf(Interface): >>> BondIf('bond0').get_arp_ip_target() '192.0.2.1' """ - return self.get_interface('bond_arp_ip_target') + # As this function might also be called from update() of a VLAN interface + # we must check if the bond_arp_ip_target retrieval worked or not - as this + # can not be set for a bond vif interface + try: + return self.get_interface('bond_arp_ip_target') + except FileNotFoundError: + return '' def set_arp_ip_target(self, target): """ @@ -209,11 +216,31 @@ class BondIf(Interface): >>> BondIf('bond0').add_port('eth0') >>> BondIf('bond0').add_port('eth1') """ - # An interface can only be added to a bond if it is in 'down' state. If - # interface is in 'up' state, the following Kernel error will be thrown: - # bond0: eth1 is up - this may be due to an out of date ifenslave. - Interface(interface).set_admin_state('down') - return self.set_interface('bond_add_port', f'+{interface}') + + # From drivers/net/bonding/bond_main.c: + # ... + # bond_set_slave_link_state(new_slave, + # BOND_LINK_UP, + # BOND_SLAVE_NOTIFY_NOW); + # ... + # + # The kernel will ALWAYS place new bond members in "up" state regardless + # what the CLI will tell us! + + # Physical interface must be in admin down state before they can be + # enslaved. If this is not the case an error will be shown: + # bond0: eth0 is up - this may be due to an out of date ifenslave + slave = Interface(interface) + slave_state = slave.get_admin_state() + if slave_state == 'up': + slave.set_admin_state('down') + + ret = self.set_interface('bond_add_port', f'+{interface}') + # The kernel will ALWAYS place new bond members in "up" state regardless + # what the LI is configured for - thus we place the interface in its + # desired state + slave.set_admin_state(slave_state) + return ret def del_port(self, interface): """ @@ -277,3 +304,80 @@ class BondIf(Interface): >>> BondIf('bond0').set_mode('802.3ad') """ return self.set_interface('bond_mode', mode) + + def update(self, config): + """ General helper function which works on a dictionary retrived by + get_config_dict(). It's main intention is to consolidate the scattered + interface setup code and provide a single point of entry when workin + on any interface. """ + + # use ref-counting function to place an interface into admin down state. + # set_admin_state_up() must be called the same amount of times else the + # interface won't come up. This can/should be used to prevent link flapping + # when changing interface parameters require the interface to be down. + # We will disable it once before reconfiguration and enable it afterwards. + if 'shutdown_required' in config: + self.set_admin_state('down') + + # call base class first + super().update(config) + + # ARP monitor targets need to be synchronized between sysfs and CLI. + # Unfortunately an address can't be send twice to sysfs as this will + # result in the following exception: OSError: [Errno 22] Invalid argument. + # + # We remove ALL addresses prior to adding new ones, this will remove + # addresses manually added by the user too - but as we are limited to 16 adresses + # from the kernel side this looks valid to me. We won't run into an error + # when a user added manual adresses which would result in having more + # then 16 adresses in total. + arp_tgt_addr = list(map(str, self.get_arp_ip_target().split())) + for addr in arp_tgt_addr: + self.set_arp_ip_target('-' + addr) + + # Add configured ARP target addresses + value = jmespath.search('arp_monitor.target', config) + if isinstance(value, str): + value = [value] + if value: + for addr in value: + self.set_arp_ip_target('+' + addr) + + # Bonding transmit hash policy + value = config.get('hash_policy') + if value: self.set_hash_policy(value) + + # Some interface options can only be changed if the interface is + # administratively down + if self.get_admin_state() == 'down': + # Delete bond member port(s) + for interface in self.get_slaves(): + self.del_port(interface) + + # Bonding policy/mode + value = config.get('mode') + if value: self.set_mode(value) + + # Add (enslave) interfaces to bond + value = jmespath.search('member.interface', config) + if value: + for interface in value: + # if we've come here we already verified the interface does + # not have an addresses configured so just flush any + # remaining ones + cmd(f'ip addr flush dev "{interface}"') + self.add_port(interface) + + # Primary device interface - must be set after 'mode' + value = config.get('primary') + if value: self.set_primary(value) + + # Enable/Disable of an interface must always be done at the end of the + # derived class to make use of the ref-counting set_admin_state() + # function. We will only enable the interface if 'up' was called as + # often as 'down'. This is required by some interface implementations + # as certain parameters can only be changed when the interface is + # in admin-down state. This ensures the link does not flap during + # reconfiguration. + state = 'down' if 'disable' in config else 'up' + self.set_admin_state(state) diff --git a/python/vyos/ifconfig/interface.py b/python/vyos/ifconfig/interface.py index 1fe4f74f2..7e887db1b 100644 --- a/python/vyos/ifconfig/interface.py +++ b/python/vyos/ifconfig/interface.py @@ -205,6 +205,7 @@ class Interface(Control): # make sure the ifname is the first argument and not from the dict self.config['ifname'] = ifname + self._admin_state_down_cnt = 0 # we must have updated config before initialising the Interface super().__init__(**kargs) @@ -594,7 +595,13 @@ class Interface(Control): if not int(flags, 16) & 1: return None - return self.set_interface('admin_state', state) + if state == 'up': + self._admin_state_down_cnt -= 1 + if self._admin_state_down_cnt < 1: + return self.set_interface('admin_state', state) + else: + self._admin_state_down_cnt += 1 + return self.set_interface('admin_state', state) def set_proxy_arp(self, enable): """ @@ -829,8 +836,11 @@ class Interface(Control): # There are some items in the configuration which can only be applied # if this instance is not bound to a bridge. This should be checked # by the caller but better save then sorry! - if not config.get('is_bridge_member', False): - # Bind interface instance into VRF + if not any(k in ['is_bond_member', 'is_bridge_member'] for k in config): + # Bind interface to given VRF or unbind it if vrf node is not set. + # unbinding will call 'ip link set dev eth0 nomaster' which will + # also drop the interface out of a bridge or bond - thus this is + # checked before self.set_vrf(config.get('vrf', '')) # DHCP options diff --git a/python/vyos/validate.py b/python/vyos/validate.py index a0620e4dd..ceeb6888a 100644 --- a/python/vyos/validate.py +++ b/python/vyos/validate.py @@ -279,7 +279,6 @@ def is_member(conf, interface, intftype=None): False -> interface type cannot have members """ ret_val = None - if intftype not in ['bonding', 'bridge', None]: raise ValueError(( f'unknown interface type "{intftype}" or it cannot ' @@ -292,9 +291,9 @@ def is_member(conf, interface, intftype=None): conf.set_level([]) for it in intftype: - base = 'interfaces ' + it + base = ['interfaces', it] for intf in conf.list_nodes(base): - memberintf = [base, intf, 'member', 'interface'] + memberintf = base + [intf, 'member', 'interface'] if xml.is_tag(memberintf): if interface in conf.list_nodes(memberintf): ret_val = intf diff --git a/src/conf_mode/interfaces-bonding.py b/src/conf_mode/interfaces-bonding.py index a16c4e105..8e87a0059 100755 --- a/src/conf_mode/interfaces-bonding.py +++ b/src/conf_mode/interfaces-bonding.py @@ -16,41 +16,25 @@ import os -from copy import deepcopy from sys import exit from netifaces import interfaces -from vyos.ifconfig import BondIf -from vyos.ifconfig_vlan import apply_all_vlans, verify_vlan_config -from vyos.configdict import list_diff, intf_to_dict, add_to_dict, interface_default_data from vyos.config import Config -from vyos.util import call, cmd -from vyos.validate import is_member, has_address_configured +from vyos.configdict import get_interface_dict +from vyos.configdict import leaf_node_changed +from vyos.configverify import verify_address +from vyos.configverify import verify_bridge_delete +from vyos.configverify import verify_dhcpv6 +from vyos.configverify import verify_source_interface +from vyos.configverify import verify_vlan_config +from vyos.configverify import verify_vrf +from vyos.ifconfig import BondIf +from vyos.validate import is_member +from vyos.validate import has_address_configured from vyos import ConfigError - from vyos import airbag airbag.enable() -default_config_data = { - **interface_default_data, - 'arp_mon_intvl': 0, - 'arp_mon_tgt': [], - 'deleted': False, - 'hash_policy': 'layer2', - 'intf': '', - 'ip_arp_cache_tmo': 30, - 'ip_proxy_arp_pvlan': 0, - 'mode': '802.3ad', - 'member': [], - 'shutdown_required': False, - 'primary': '', - 'vif_s': {}, - 'vif_s_remove': [], - 'vif': {}, - 'vif_remove': [], -} - - def get_bond_mode(mode): if mode == 'round-robin': return 'balance-rr' @@ -67,339 +51,144 @@ def get_bond_mode(mode): elif mode == 'adaptive-load-balance': return 'balance-alb' else: - raise ConfigError('invalid bond mode "{}"'.format(mode)) + raise ConfigError(f'invalid bond mode "{mode}"') def get_config(): + """ + Retrive CLI config as dictionary. Dictionary can never be empty, as at least the + interface name will be added or a deleted flag + """ + conf = Config() + base = ['interfaces', 'bonding'] + # determine tagNode instance if 'VYOS_TAGNODE_VALUE' not in os.environ: raise ConfigError('Interface (VYOS_TAGNODE_VALUE) not specified') ifname = os.environ['VYOS_TAGNODE_VALUE'] - conf = Config() + bond = get_interface_dict(conf, base, ifname) + + # To make our own life easier transfor the list of member interfaces + # into a dictionary - we will use this to add additional information + # later on for wach member + if 'member' in bond and 'interface' in bond['member']: + # first convert it to a list if only one member is given + if isinstance(bond['member']['interface'], str): + bond['member']['interface'] = [bond['member']['interface']] + + tmp={} + for interface in bond['member']['interface']: + tmp.update({interface: {}}) + + bond['member']['interface'] = tmp + + if 'mode' in bond: + bond['mode'] = get_bond_mode(bond['mode']) + + tmp = leaf_node_changed(conf, ['mode']) + if tmp: + bond.update({'shutdown_required': ''}) + + # determine which members have been removed + tmp = leaf_node_changed(conf, ['member', 'interface']) + if tmp: + bond.update({'shutdown_required': ''}) + if 'member' in bond: + bond['member'].update({'interface_remove': tmp }) + else: + bond.update({'member': {'interface_remove': tmp }}) + + if 'member' in bond and 'interface' in bond['member']: + for interface, interface_config in bond['member']['interface'].items(): + # Check if we are a member of another bond device + tmp = is_member(conf, interface, 'bridge') + if tmp: + interface_config.update({'is_bridge_member' : tmp}) - # initialize kernel module if not loaded - if not os.path.isfile('/sys/class/net/bonding_masters'): - import syslog - syslog.syslog(syslog.LOG_NOTICE, "loading bonding kernel module") - if call('modprobe bonding max_bonds=0 miimon=250') != 0: - syslog.syslog(syslog.LOG_NOTICE, "failed loading bonding kernel module") - raise ConfigError("failed loading bonding kernel module") - - # check if bond has been removed - cfg_base = 'interfaces bonding ' + ifname - if not conf.exists(cfg_base): - bond = deepcopy(default_config_data) - bond['intf'] = ifname - bond['deleted'] = True - return bond - - # set new configuration level - conf.set_level(cfg_base) - - bond, disabled = intf_to_dict(conf, default_config_data) - - # ARP link monitoring frequency in milliseconds - if conf.exists('arp-monitor interval'): - bond['arp_mon_intvl'] = int(conf.return_value('arp-monitor interval')) - - # IP address to use for ARP monitoring - if conf.exists('arp-monitor target'): - bond['arp_mon_tgt'] = conf.return_values('arp-monitor target') - - # Bonding transmit hash policy - if conf.exists('hash-policy'): - bond['hash_policy'] = conf.return_value('hash-policy') - - # ARP cache entry timeout in seconds - if conf.exists('ip arp-cache-timeout'): - bond['ip_arp_cache_tmo'] = int(conf.return_value('ip arp-cache-timeout')) - - # Enable private VLAN proxy ARP on this interface - if conf.exists('ip proxy-arp-pvlan'): - bond['ip_proxy_arp_pvlan'] = 1 - - # Bonding mode - if conf.exists('mode'): - act_mode = conf.return_value('mode') - eff_mode = conf.return_effective_value('mode') - if not (act_mode == eff_mode): - bond['shutdown_required'] = True - - bond['mode'] = get_bond_mode(act_mode) - - # determine bond member interfaces (currently configured) - bond['member'] = conf.return_values('member interface') - - # We can not call conf.return_effective_values() as it would not work - # on reboots. Reboots/First boot will return that running config and - # saved config is the same, thus on a reboot the bond members will - # not be added all (https://phabricator.vyos.net/T2030) - live_members = BondIf(bond['intf']).get_slaves() - if not (bond['member'] == live_members): - bond['shutdown_required'] = True - - # Primary device interface - if conf.exists('primary'): - bond['primary'] = conf.return_value('primary') - - add_to_dict(conf, disabled, bond, 'vif', 'vif') - add_to_dict(conf, disabled, bond, 'vif-s', 'vif_s') + # Check if we are a member of a bond device + tmp = is_member(conf, interface, 'bonding') + if tmp and tmp != ifname: + interface_config.update({'is_bond_member' : tmp}) + + # bond members must not have an assigned address + tmp = has_address_configured(conf, interface) + if tmp: + interface_config.update({'has_address' : ''}) return bond def verify(bond): - if bond['deleted']: - if bond['is_bridge_member']: - raise ConfigError(( - f'Cannot delete interface "{bond["intf"]}" as it is a ' - f'member of bridge "{bond["is_bridge_member"]}"!')) - + if 'deleted' in bond: + verify_bridge_delete(bond) return None - if len(bond['arp_mon_tgt']) > 16: - raise ConfigError('The maximum number of arp-monitor targets is 16') + if 'arp_monitor' in bond: + if 'target' in bond['arp_monitor'] and len(int(bond['arp_monitor']['target'])) > 16: + raise ConfigError('The maximum number of arp-monitor targets is 16') + + if 'interval' in bond['arp_monitor'] and len(int(bond['arp_monitor']['interval'])) > 0: + if bond['mode'] in ['802.3ad', 'balance-tlb', 'balance-alb']: + raise ConfigError('ARP link monitoring does not work for mode 802.3ad, ' \ + 'transmit-load-balance or adaptive-load-balance') - if bond['primary']: + if 'primary' in bond: if bond['mode'] not in ['active-backup', 'balance-tlb', 'balance-alb']: - raise ConfigError(( - 'Mode dependency failed, primary not supported in mode ' - f'"{bond["mode"]}"!')) - - if ( bond['is_bridge_member'] - and ( bond['address'] - or bond['ipv6_eui64_prefix'] - or bond['ipv6_autoconf'] ) ): - raise ConfigError(( - f'Cannot assign address to interface "{bond["intf"]}" ' - f'as it is a member of bridge "{bond["is_bridge_member"]}"!')) - - if bond['vrf']: - if bond['vrf'] not in interfaces(): - raise ConfigError(f'VRF "{bond["vrf"]}" does not exist') - - if bond['is_bridge_member']: - raise ConfigError(( - f'Interface "{bond["intf"]}" cannot be member of VRF ' - f'"{bond["vrf"]}" and bridge {bond["is_bridge_member"]} ' - f'at the same time!')) + raise ConfigError('Option primary - mode dependency failed, not' + 'supported in mode {mode}!'.format(**bond)) + + verify_address(bond) + verify_dhcpv6(bond) + verify_vrf(bond) # use common function to verify VLAN configuration verify_vlan_config(bond) - conf = Config() - for intf in bond['member']: - # check if member interface is "real" - if intf not in interfaces(): - raise ConfigError(f'Interface {intf} does not exist!') - - # a bonding member interface is only allowed to be assigned to one bond! - all_bonds = conf.list_nodes('interfaces bonding') - # We do not need to check our own bond - all_bonds.remove(bond['intf']) - for tmp in all_bonds: - if conf.exists('interfaces bonding {tmp} member interface {intf}'): - raise ConfigError(( - f'Cannot add interface "{intf}" to bond "{bond["intf"]}", ' - f'it is already a member of bond "{tmp}"!')) - - # can not add interfaces with an assigned address to a bond - if has_address_configured(conf, intf): - raise ConfigError(( - f'Cannot add interface "{intf}" to bond "{bond["intf"]}", ' - f'it has an address assigned!')) - - # bond members are not allowed to be bridge members - tmp = is_member(conf, intf, 'bridge') - if tmp: - raise ConfigError(( - f'Cannot add interface "{intf}" to bond "{bond["intf"]}", ' - f'it is already a member of bridge "{tmp}"!')) - - # bond members are not allowed to be vrrp members - for tmp in conf.list_nodes('high-availability vrrp group'): - if conf.exists('high-availability vrrp group {tmp} interface {intf}'): - raise ConfigError(( - f'Cannot add interface "{intf}" to bond "{bond["intf"]}", ' - f'it is already a member of VRRP group "{tmp}"!')) - - # bond members are not allowed to be underlaying psuedo-ethernet devices - for tmp in conf.list_nodes('interfaces pseudo-ethernet'): - if conf.exists('interfaces pseudo-ethernet {tmp} link {intf}'): - raise ConfigError(( - f'Cannot add interface "{intf}" to bond "{bond["intf"]}", ' - f'it is already the link of pseudo-ethernet "{tmp}"!')) - - # bond members are not allowed to be underlaying vxlan devices - for tmp in conf.list_nodes('interfaces vxlan'): - if conf.exists('interfaces vxlan {tmp} link {intf}'): - raise ConfigError(( - f'Cannot add interface "{intf}" to bond "{bond["intf"]}", ' - f'it is already the link of VXLAN "{tmp}"!')) - - if bond['primary']: - if bond['primary'] not in bond['member']: - raise ConfigError(f'Bond "{bond["intf"]}" primary interface must be a member') + bond_name = bond['ifname'] + if 'member' in bond: + member = bond.get('member') + for interface, interface_config in member.get('interface', {}).items(): + error_msg = f'Can not add interface "{interface}" to bond "{bond_name}", ' + + if interface == 'lo': + raise ConfigError('Loopback interface "lo" can not be added to a bond') + + if interface not in interfaces(): + raise ConfigError(error_msg + 'it does not exist!') + + if 'is_bridge_member' in interface_config: + tmp = interface_config['is_bridge_member'] + raise ConfigError(error_msg + f'it is already a member of bridge "{tmp}"!') + + if 'is_bond_member' in interface_config: + tmp = interface_config['is_bond_member'] + raise ConfigError(error_msg + f'it is already a member of bond "{tmp}"!') + + if 'has_address' in interface_config: + raise ConfigError(error_msg + 'it has an address assigned!') + + + if 'primary' in bond: + if bond['primary'] not in bond['member']['interface']: + raise ConfigError(f'Primary interface of bond "{bond_name}" must be a member interface') if bond['mode'] not in ['active-backup', 'balance-tlb', 'balance-alb']: raise ConfigError('primary interface only works for mode active-backup, ' \ 'transmit-load-balance or adaptive-load-balance') - if bond['arp_mon_intvl'] > 0: - if bond['mode'] in ['802.3ad', 'balance-tlb', 'balance-alb']: - raise ConfigError('ARP link monitoring does not work for mode 802.3ad, ' \ - 'transmit-load-balance or adaptive-load-balance') - return None def generate(bond): return None def apply(bond): - b = BondIf(bond['intf']) + b = BondIf(bond['ifname']) - if bond['deleted']: + if 'deleted' in bond: # delete interface b.remove() else: - # ARP link monitoring frequency, reset miimon when arp-montior is inactive - # this is done inside BondIf automatically - b.set_arp_interval(bond['arp_mon_intvl']) - - # ARP monitor targets need to be synchronized between sysfs and CLI. - # Unfortunately an address can't be send twice to sysfs as this will - # result in the following exception: OSError: [Errno 22] Invalid argument. - # - # We remove ALL adresses prior adding new ones, this will remove addresses - # added manually by the user too - but as we are limited to 16 adresses - # from the kernel side this looks valid to me. We won't run into an error - # when a user added manual adresses which would result in having more - # then 16 adresses in total. - arp_tgt_addr = list(map(str, b.get_arp_ip_target().split())) - for addr in arp_tgt_addr: - b.set_arp_ip_target('-' + addr) - - # Add configured ARP target addresses - for addr in bond['arp_mon_tgt']: - b.set_arp_ip_target('+' + addr) - - # update interface description used e.g. within SNMP - b.set_alias(bond['description']) - - if bond['dhcp_client_id']: - b.dhcp.v4.options['client_id'] = bond['dhcp_client_id'] - - if bond['dhcp_hostname']: - b.dhcp.v4.options['hostname'] = bond['dhcp_hostname'] - - if bond['dhcp_vendor_class_id']: - b.dhcp.v4.options['vendor_class_id'] = bond['dhcp_vendor_class_id'] - - if bond['dhcpv6_prm_only']: - b.dhcp.v6.options['dhcpv6_prm_only'] = True - - if bond['dhcpv6_temporary']: - b.dhcp.v6.options['dhcpv6_temporary'] = True - - if bond['dhcpv6_pd_length']: - b.dhcp.v6.options['dhcpv6_pd_length'] = bond['dhcpv6_pd_length'] - - if bond['dhcpv6_pd_interfaces']: - b.dhcp.v6.options['dhcpv6_pd_interfaces'] = bond['dhcpv6_pd_interfaces'] - - # ignore link state changes - b.set_link_detect(bond['disable_link_detect']) - # Bonding transmit hash policy - b.set_hash_policy(bond['hash_policy']) - # configure ARP cache timeout in milliseconds - b.set_arp_cache_tmo(bond['ip_arp_cache_tmo']) - # configure ARP filter configuration - b.set_arp_filter(bond['ip_disable_arp_filter']) - # configure ARP accept - b.set_arp_accept(bond['ip_enable_arp_accept']) - # configure ARP announce - b.set_arp_announce(bond['ip_enable_arp_announce']) - # configure ARP ignore - b.set_arp_ignore(bond['ip_enable_arp_ignore']) - # Enable proxy-arp on this interface - b.set_proxy_arp(bond['ip_proxy_arp']) - # Enable private VLAN proxy ARP on this interface - b.set_proxy_arp_pvlan(bond['ip_proxy_arp_pvlan']) - # IPv6 accept RA - b.set_ipv6_accept_ra(bond['ipv6_accept_ra']) - # IPv6 address autoconfiguration - b.set_ipv6_autoconf(bond['ipv6_autoconf']) - # IPv6 forwarding - b.set_ipv6_forwarding(bond['ipv6_forwarding']) - # IPv6 Duplicate Address Detection (DAD) tries - b.set_ipv6_dad_messages(bond['ipv6_dup_addr_detect']) - - # Delete old IPv6 EUI64 addresses before changing MAC - for addr in bond['ipv6_eui64_prefix_remove']: - b.del_ipv6_eui64_address(addr) - - # Change interface MAC address - if bond['mac']: - b.set_mac(bond['mac']) - - # Add IPv6 EUI-based addresses - for addr in bond['ipv6_eui64_prefix']: - b.add_ipv6_eui64_address(addr) - - # Maximum Transmission Unit (MTU) - b.set_mtu(bond['mtu']) - - # Primary device interface - if bond['primary']: - b.set_primary(bond['primary']) - - # Some parameters can not be changed when the bond is up. - if bond['shutdown_required']: - # Disable bond prior changing of certain properties - b.set_admin_state('down') - - # The bonding mode can not be changed when there are interfaces enslaved - # to this bond, thus we will free all interfaces from the bond first! - for intf in b.get_slaves(): - b.del_port(intf) - - # Bonding policy/mode - b.set_mode(bond['mode']) - - # Add (enslave) interfaces to bond - for intf in bond['member']: - # if we've come here we already verified the interface doesn't - # have addresses configured so just flush any remaining ones - cmd(f'ip addr flush dev "{intf}"') - b.add_port(intf) - - # As the bond interface is always disabled first when changing - # parameters we will only re-enable the interface if it is not - # administratively disabled - if not bond['disable']: - b.set_admin_state('up') - else: - b.set_admin_state('down') - - # Configure interface address(es) - # - not longer required addresses get removed first - # - newly addresses will be added second - for addr in bond['address_remove']: - b.del_addr(addr) - for addr in bond['address']: - b.add_addr(addr) - - # assign/remove VRF (ONLY when not a member of a bridge, - # otherwise 'nomaster' removes it from it) - if not bond['is_bridge_member']: - b.set_vrf(bond['vrf']) - - # re-add ourselves to any bridge we might have fallen out of - if bond['is_bridge_member']: - b.add_to_bridge(bond['is_bridge_member']) - - # apply all vlans to interface - apply_all_vlans(b, bond) + b.update(bond) return None -- cgit v1.2.3 From d81ce482836ab4adf4f71e2b3dc21477db49a9f0 Mon Sep 17 00:00:00 2001 From: Christian Poessinger <christian@poessinger.com> Date: Fri, 24 Jul 2020 17:24:50 +0200 Subject: vlan: ifconfig: T2653: move get_removed_vlans() to vyos.configdiff As we wrap up additional functions from this library it should be part of it. --- python/vyos/configdict.py | 28 +++++++++++++++++++++++++++- python/vyos/ifconfig_vlan.py | 27 --------------------------- 2 files changed, 27 insertions(+), 28 deletions(-) (limited to 'python/vyos') diff --git a/python/vyos/configdict.py b/python/vyos/configdict.py index f26b47e41..a1553ae61 100644 --- a/python/vyos/configdict.py +++ b/python/vyos/configdict.py @@ -168,6 +168,33 @@ def node_changed(conf, path): keys = D.get_child_nodes_diff(path, expand_nodes=Diff.DELETE)['delete'].keys() return list(keys) +def get_removed_vlans(conf, dict): + """ + Common function to parse a dictionary retrieved via get_config_dict() and + determine any added/removed VLAN interfaces - be it 802.1q or Q-in-Q. + """ + from vyos.configdiff import get_config_diff, Diff + + # Check vif, vif-s/vif-c VLAN interfaces for removal + D = get_config_diff(conf, key_mangling=('-', '_')) + D.set_level(conf.get_level()) + # get_child_nodes() will return dict_keys(), mangle this into a list with PEP448 + keys = D.get_child_nodes_diff(['vif'], expand_nodes=Diff.DELETE)['delete'].keys() + if keys: + dict.update({'vif_remove': [*keys]}) + + # get_child_nodes() will return dict_keys(), mangle this into a list with PEP448 + keys = D.get_child_nodes_diff(['vif-s'], expand_nodes=Diff.DELETE)['delete'].keys() + if keys: + dict.update({'vif_s_remove': [*keys]}) + + for vif in dict.get('vif_s', {}).keys(): + keys = D.get_child_nodes_diff(['vif-s', vif, 'vif-c'], expand_nodes=Diff.DELETE)['delete'].keys() + if keys: + dict.update({'vif_s': { vif : {'vif_c_remove': [*keys]}}}) + + return dict + def get_interface_dict(config, base, ifname): """ Common utility function to retrieve and mandgle the interfaces available @@ -177,7 +204,6 @@ def get_interface_dict(config, base, ifname): Will return a dictionary with the necessary interface configuration """ from vyos.xml import defaults - from vyos.ifconfig_vlan import get_removed_vlans # retrieve interface default values default_values = defaults(base) diff --git a/python/vyos/ifconfig_vlan.py b/python/vyos/ifconfig_vlan.py index 0e4ecda53..442cb0db8 100644 --- a/python/vyos/ifconfig_vlan.py +++ b/python/vyos/ifconfig_vlan.py @@ -16,33 +16,6 @@ from netifaces import interfaces from vyos import ConfigError -def get_removed_vlans(conf, dict): - """ - Common function to parse a dictionary retrieved via get_config_dict() and - determine any added/removed VLAN interfaces - be it 802.1q or Q-in-Q. - """ - from vyos.configdiff import get_config_diff, Diff - - # Check vif, vif-s/vif-c VLAN interfaces for removal - D = get_config_diff(conf, key_mangling=('-', '_')) - D.set_level(conf.get_level()) - # get_child_nodes() will return dict_keys(), mangle this into a list with PEP448 - keys = D.get_child_nodes_diff(['vif'], expand_nodes=Diff.DELETE)['delete'].keys() - if keys: - dict.update({'vif_remove': [*keys]}) - - # get_child_nodes() will return dict_keys(), mangle this into a list with PEP448 - keys = D.get_child_nodes_diff(['vif-s'], expand_nodes=Diff.DELETE)['delete'].keys() - if keys: - dict.update({'vif_s_remove': [*keys]}) - - for vif in dict.get('vif_s', {}).keys(): - keys = D.get_child_nodes_diff(['vif-s', vif, 'vif-c'], expand_nodes=Diff.DELETE)['delete'].keys() - if keys: - dict.update({'vif_s': { vif : {'vif_c_remove': [*keys]}}}) - - return dict - def apply_all_vlans(intf, intfconfig): """ Function applies all VLANs to the passed interface. -- cgit v1.2.3 From ee65528d720964cf77bc9b28e6f8fb19b9783066 Mon Sep 17 00:00:00 2001 From: Christian Poessinger <christian@poessinger.com> Date: Fri, 24 Jul 2020 21:06:02 +0200 Subject: ifconfig: T2653: move get_ethertype() from configdict to interface ... as it is only used inside the interface class. --- python/vyos/configdict.py | 9 +-------- python/vyos/ifconfig/interface.py | 8 +++++++- 2 files changed, 8 insertions(+), 9 deletions(-) (limited to 'python/vyos') diff --git a/python/vyos/configdict.py b/python/vyos/configdict.py index a1553ae61..d79365722 100644 --- a/python/vyos/configdict.py +++ b/python/vyos/configdict.py @@ -267,14 +267,6 @@ def get_interface_dict(config, base, ifname): return dict -def get_ethertype(ethertype_val): - if ethertype_val == '0x88A8': - return '802.1ad' - elif ethertype_val == '0x8100': - return '802.1q' - else: - raise ConfigError('invalid ethertype "{}"'.format(ethertype_val)) - dhcpv6_pd_default_data = { 'dhcpv6_prm_only': False, 'dhcpv6_temporary': False, @@ -636,6 +628,7 @@ def add_to_dict(conf, disabled, ifdict, section, key): def vlan_to_dict(conf, default=vlan_default): + from vyos.ifconfig.interface import get_ethertype vlan, disabled = intf_to_dict(conf, default) # if this is a not within vif-s node, we are done diff --git a/python/vyos/ifconfig/interface.py b/python/vyos/ifconfig/interface.py index 7e887db1b..5496499e5 100644 --- a/python/vyos/ifconfig/interface.py +++ b/python/vyos/ifconfig/interface.py @@ -31,7 +31,6 @@ from netifaces import AF_INET6 from vyos import ConfigError from vyos.configdict import list_diff -from vyos.configdict import get_ethertype from vyos.util import mac2eui64 from vyos.validate import is_ipv4 from vyos.validate import is_ipv6 @@ -49,6 +48,13 @@ from vyos.ifconfig.vrrp import VRRP from vyos.ifconfig.operational import Operational from vyos.ifconfig import Section +def get_ethertype(ethertype_val): + if ethertype_val == '0x88A8': + return '802.1ad' + elif ethertype_val == '0x8100': + return '802.1q' + else: + raise ConfigError('invalid ethertype "{}"'.format(ethertype_val)) class Interface(Control): # This is the class which will be used to create -- cgit v1.2.3 From 72c0ac35b4acf049de29ce1ea67af28659793098 Mon Sep 17 00:00:00 2001 From: Christian Poessinger <christian@poessinger.com> Date: Fri, 24 Jul 2020 22:00:57 +0200 Subject: vyos.configdict: T2653: remove obsolete code from configdict and ifconfig_vlan After all interfaces have been moved to the targetted implementation of T2653 the old implementations of migrating a CLI session to a configuration dict can be dropped. --- python/vyos/configdict.py | 380 ------------------------------------------- python/vyos/ifconfig_vlan.py | 245 ---------------------------- 2 files changed, 625 deletions(-) delete mode 100644 python/vyos/ifconfig_vlan.py (limited to 'python/vyos') diff --git a/python/vyos/configdict.py b/python/vyos/configdict.py index d79365722..53b5f9492 100644 --- a/python/vyos/configdict.py +++ b/python/vyos/configdict.py @@ -267,383 +267,3 @@ def get_interface_dict(config, base, ifname): return dict -dhcpv6_pd_default_data = { - 'dhcpv6_prm_only': False, - 'dhcpv6_temporary': False, - 'dhcpv6_pd_length': '', - 'dhcpv6_pd_interfaces': [] -} - -interface_default_data = { - **dhcpv6_pd_default_data, - 'address': [], - 'address_remove': [], - 'description': '', - 'dhcp_client_id': '', - 'dhcp_hostname': '', - 'dhcp_vendor_class_id': '', - 'disable': False, - 'disable_link_detect': 1, - 'ip_disable_arp_filter': 1, - 'ip_enable_arp_accept': 0, - 'ip_enable_arp_announce': 0, - 'ip_enable_arp_ignore': 0, - 'ip_proxy_arp': 0, - 'ipv6_accept_ra': 1, - 'ipv6_autoconf': 0, - 'ipv6_eui64_prefix': [], - 'ipv6_eui64_prefix_remove': [], - 'ipv6_forwarding': 1, - 'ipv6_dup_addr_detect': 1, - 'is_bridge_member': False, - 'mac': '', - 'mtu': 1500, - 'vrf': '' -} - -vlan_default = { - **interface_default_data, - 'egress_qos': '', - 'egress_qos_changed': False, - 'ingress_qos': '', - 'ingress_qos_changed': False, - 'vif_c': {}, - 'vif_c_remove': [] -} - -# see: https://docs.python.org/3/library/enum.html#functional-api -disable = Enum('disable','none was now both') - -def disable_state(conf, check=[3,5,7]): - """ - return if and how a particual section of the configuration is has disable'd - using "disable" including if it was disabled by one of its parent. - - check: a list of the level we should check, here 7,5 and 3 - interfaces ethernet eth1 vif-s 1 vif-c 2 disable - interfaces ethernet eth1 vif 1 disable - interfaces ethernet eth1 disable - - it returns an enum (none, was, now, both) - """ - - # save where we are in the config - current_level = conf.get_level() - - # logic to figure out if the interface (or one of it parent is disabled) - eff_disable = False - act_disable = False - - levels = check[:] - working_level = current_level[:] - - while levels: - position = len(working_level) - if not position: - break - if position not in levels: - working_level = working_level[:-1] - continue - - levels.remove(position) - conf.set_level(working_level) - working_level = working_level[:-1] - - eff_disable = eff_disable or conf.exists_effective('disable') - act_disable = act_disable or conf.exists('disable') - - conf.set_level(current_level) - - # how the disabling changed - if eff_disable and act_disable: - return disable.both - if eff_disable and not eff_disable: - return disable.was - if not eff_disable and act_disable: - return disable.now - return disable.none - - -def intf_to_dict(conf, default): - from vyos.ifconfig import Interface - - """ - Common used function which will extract VLAN related information from config - and represent the result as Python dictionary. - - Function call's itself recursively if a vif-s/vif-c pair is detected. - """ - - intf = deepcopy(default) - intf['intf'] = ifname_from_config(conf) - - current_vif_list = conf.list_nodes(['vif']) - previous_vif_list = conf.list_effective_nodes(['vif']) - - # set the vif to be deleted - for vif in previous_vif_list: - if vif not in current_vif_list: - intf['vif_remove'].append(vif) - - # retrieve interface description - if conf.exists(['description']): - intf['description'] = conf.return_value(['description']) - - # get DHCP client identifier - if conf.exists(['dhcp-options', 'client-id']): - intf['dhcp_client_id'] = conf.return_value(['dhcp-options', 'client-id']) - - # DHCP client host name (overrides the system host name) - if conf.exists(['dhcp-options', 'host-name']): - intf['dhcp_hostname'] = conf.return_value(['dhcp-options', 'host-name']) - - # DHCP client vendor identifier - if conf.exists(['dhcp-options', 'vendor-class-id']): - intf['dhcp_vendor_class_id'] = conf.return_value( - ['dhcp-options', 'vendor-class-id']) - - # DHCPv6 only acquire config parameters, no address - if conf.exists(['dhcpv6-options', 'parameters-only']): - intf['dhcpv6_prm_only'] = True - - # DHCPv6 prefix delegation (RFC3633) - current_level = conf.get_level() - if conf.exists(['dhcpv6-options', 'prefix-delegation']): - dhcpv6_pd_path = current_level + ['dhcpv6-options', 'prefix-delegation'] - conf.set_level(dhcpv6_pd_path) - - # retriebe DHCPv6-PD prefix helper length as some ISPs only hand out a - # /64 by default (https://phabricator.vyos.net/T2506) - if conf.exists(['length']): - intf['dhcpv6_pd_length'] = conf.return_value(['length']) - - for interface in conf.list_nodes(['interface']): - conf.set_level(dhcpv6_pd_path + ['interface', interface]) - pd = { - 'ifname': interface, - 'sla_id': '', - 'sla_len': '', - 'if_id': '' - } - - if conf.exists(['sla-id']): - pd['sla_id'] = conf.return_value(['sla-id']) - - if conf.exists(['sla-len']): - pd['sla_len'] = conf.return_value(['sla-len']) - - if conf.exists(['address']): - pd['if_id'] = conf.return_value(['address']) - - intf['dhcpv6_pd_interfaces'].append(pd) - - # re-set config level - conf.set_level(current_level) - - # DHCPv6 temporary IPv6 address - if conf.exists(['dhcpv6-options', 'temporary']): - intf['dhcpv6_temporary'] = True - - # ignore link state changes - if conf.exists(['disable-link-detect']): - intf['disable_link_detect'] = 2 - - # ARP filter configuration - if conf.exists(['ip', 'disable-arp-filter']): - intf['ip_disable_arp_filter'] = 0 - - # ARP enable accept - if conf.exists(['ip', 'enable-arp-accept']): - intf['ip_enable_arp_accept'] = 1 - - # ARP enable announce - if conf.exists(['ip', 'enable-arp-announce']): - intf['ip_enable_arp_announce'] = 1 - - # ARP enable ignore - if conf.exists(['ip', 'enable-arp-ignore']): - intf['ip_enable_arp_ignore'] = 1 - - # Enable Proxy ARP - if conf.exists(['ip', 'enable-proxy-arp']): - intf['ip_proxy_arp'] = 1 - - # Enable acquisition of IPv6 address using stateless autoconfig (SLAAC) - if conf.exists(['ipv6', 'address', 'autoconf']): - intf['ipv6_autoconf'] = 1 - - # Disable IPv6 forwarding on this interface - if conf.exists(['ipv6', 'disable-forwarding']): - intf['ipv6_forwarding'] = 0 - - # check if interface is member of a bridge - intf['is_bridge_member'] = is_member(conf, intf['intf'], 'bridge') - - # IPv6 Duplicate Address Detection (DAD) tries - if conf.exists(['ipv6', 'dup-addr-detect-transmits']): - intf['ipv6_dup_addr_detect'] = int( - conf.return_value(['ipv6', 'dup-addr-detect-transmits'])) - - # Media Access Control (MAC) address - if conf.exists(['mac']): - intf['mac'] = conf.return_value(['mac']) - - # Maximum Transmission Unit (MTU) - if conf.exists(['mtu']): - intf['mtu'] = int(conf.return_value(['mtu'])) - - # retrieve VRF instance - if conf.exists(['vrf']): - intf['vrf'] = conf.return_value(['vrf']) - - # egress QoS - if conf.exists(['egress-qos']): - intf['egress_qos'] = conf.return_value(['egress-qos']) - - # egress changes QoS require VLAN interface recreation - if conf.return_effective_value(['egress-qos']): - if intf['egress_qos'] != conf.return_effective_value(['egress-qos']): - intf['egress_qos_changed'] = True - - # ingress QoS - if conf.exists(['ingress-qos']): - intf['ingress_qos'] = conf.return_value(['ingress-qos']) - - # ingress changes QoS require VLAN interface recreation - if conf.return_effective_value(['ingress-qos']): - if intf['ingress_qos'] != conf.return_effective_value(['ingress-qos']): - intf['ingress_qos_changed'] = True - - # Get the interface addresses - intf['address'] = conf.return_values(['address']) - - # addresses to remove - difference between effective and working config - intf['address_remove'] = list_diff( - conf.return_effective_values(['address']), intf['address']) - - # Get prefixes for IPv6 addressing based on MAC address (EUI-64) - intf['ipv6_eui64_prefix'] = conf.return_values(['ipv6', 'address', 'eui64']) - - # EUI64 to remove - difference between effective and working config - intf['ipv6_eui64_prefix_remove'] = list_diff( - conf.return_effective_values(['ipv6', 'address', 'eui64']), - intf['ipv6_eui64_prefix']) - - # Determine if the interface should be disabled - disabled = disable_state(conf) - if disabled == disable.both: - # was and is still disabled - intf['disable'] = True - elif disabled == disable.now: - # it is now disable but was not before - intf['disable'] = True - elif disabled == disable.was: - # it was disable but not anymore - intf['disable'] = False - else: - # normal change - intf['disable'] = False - - # Remove the default link-local address if no-default-link-local is set, - # if member of a bridge or if disabled (it may not have a MAC if it's down) - if ( conf.exists(['ipv6', 'address', 'no-default-link-local']) - or intf.get('is_bridge_member') or intf['disable'] ): - intf['ipv6_eui64_prefix_remove'].append('fe80::/64') - else: - # add the link-local by default to make IPv6 work - intf['ipv6_eui64_prefix'].append('fe80::/64') - - # If MAC has changed, remove and re-add all IPv6 EUI64 addresses - try: - interface = Interface(intf['intf'], create=False) - if intf['mac'] and intf['mac'] != interface.get_mac(): - intf['ipv6_eui64_prefix_remove'] += intf['ipv6_eui64_prefix'] - except Exception: - # If the interface does not exist, it could not have changed - pass - - # to make IPv6 SLAAC and DHCPv6 work with forwarding=1, - # accept_ra must be 2 - if intf['ipv6_autoconf'] or 'dhcpv6' in intf['address']: - intf['ipv6_accept_ra'] = 2 - - return intf, disable - - - -def add_to_dict(conf, disabled, ifdict, section, key): - """ - parse a section of vif/vif-s/vif-c and add them to the dict - follow the convention to: - * use the "key" for what to add - * use the "key" what what to remove - - conf: is the Config() already at the level we need to parse - disabled: is a disable enum so we know how to handle to data - intf: if the interface dictionary - section: is the section name to parse (vif/vif-s/vif-c) - key: is the dict key to use (vif/vifs/vifc) - """ - - if not conf.exists(section): - return ifdict - - effect = conf.list_effective_nodes(section) - active = conf.list_nodes(section) - - # the section to parse for vlan - sections = [] - - # determine which interfaces to add or remove based on disable state - if disabled == disable.both: - # was and is still disabled - ifdict[f'{key}_remove'] = [] - elif disabled == disable.now: - # it is now disable but was not before - ifdict[f'{key}_remove'] = effect - elif disabled == disable.was: - # it was disable but not anymore - ifdict[f'{key}_remove'] = [] - sections = active - else: - # normal change - # get interfaces (currently effective) - to determine which - # interface is no longer present and needs to be removed - ifdict[f'{key}_remove'] = list_diff(effect, active) - sections = active - - current_level = conf.get_level() - - # add each section, the key must already exists - for s in sections: - # set config level to vif interface - conf.set_level(current_level + [section, s]) - # add the vlan config as a key (vlan id) - value (config) pair - ifdict[key][s] = vlan_to_dict(conf) - - # re-set configuration level to leave things as found - conf.set_level(current_level) - - return ifdict - - -def vlan_to_dict(conf, default=vlan_default): - from vyos.ifconfig.interface import get_ethertype - vlan, disabled = intf_to_dict(conf, default) - - # if this is a not within vif-s node, we are done - if conf.get_level()[-2] != 'vif-s': - return vlan - - # ethertype is mandatory on vif-s nodes and only exists here! - # ethertype uses a default of 0x88A8 - tmp = '0x88A8' - if conf.exists('ethertype'): - tmp = conf.return_value('ethertype') - vlan['ethertype'] = get_ethertype(tmp) - - # check if there is a Q-in-Q vlan customer interface - # and call this function recursively - add_to_dict(conf, disable, vlan, 'vif-c', 'vif_c') - - return vlan diff --git a/python/vyos/ifconfig_vlan.py b/python/vyos/ifconfig_vlan.py deleted file mode 100644 index 442cb0db8..000000000 --- a/python/vyos/ifconfig_vlan.py +++ /dev/null @@ -1,245 +0,0 @@ -# Copyright 2019-2020 VyOS maintainers and contributors <maintainers@vyos.io> -# -# This library is free software; you can redistribute it and/or -# modify it under the terms of the GNU Lesser General Public -# License as published by the Free Software Foundation; either -# version 2.1 of the License, or (at your option) any later version. -# -# This library is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -# Lesser General Public License for more details. -# -# You should have received a copy of the GNU Lesser General Public -# License along with this library. If not, see <http://www.gnu.org/licenses/>. - -from netifaces import interfaces -from vyos import ConfigError - -def apply_all_vlans(intf, intfconfig): - """ - Function applies all VLANs to the passed interface. - - intf: object of Interface class - intfconfig: dict with interface configuration - """ - # remove no longer required service VLAN interfaces (vif-s) - for vif_s in intfconfig['vif_s_remove']: - intf.del_vlan(vif_s) - - # create service VLAN interfaces (vif-s) - for vif_s_id, vif_s in intfconfig['vif_s'].items(): - s_vlan = intf.add_vlan(vif_s_id, ethertype=vif_s['ethertype']) - apply_vlan_config(s_vlan, vif_s) - - # remove no longer required client VLAN interfaces (vif-c) - # on lower service VLAN interface - for vif_c in vif_s['vif_c_remove']: - s_vlan.del_vlan(vif_c) - - # create client VLAN interfaces (vif-c) - # on lower service VLAN interface - for vif_c_id, vif_c in vif_s['vif_c'].items(): - c_vlan = s_vlan.add_vlan(vif_c_id) - apply_vlan_config(c_vlan, vif_c) - - # remove no longer required VLAN interfaces (vif) - for vif in intfconfig['vif_remove']: - intf.del_vlan(vif) - - # create VLAN interfaces (vif) - for vif_id, vif in intfconfig['vif'].items(): - # QoS priority mapping can only be set during interface creation - # so we delete the interface first if required. - if vif['egress_qos_changed'] or vif['ingress_qos_changed']: - try: - # on system bootup the above condition is true but the interface - # does not exists, which throws an exception, but that's legal - intf.del_vlan(vif_id) - except: - pass - - vlan = intf.add_vlan(vif_id, ingress_qos=vif['ingress_qos'], egress_qos=vif['egress_qos']) - apply_vlan_config(vlan, vif) - - -def apply_vlan_config(vlan, config): - """ - Generic function to apply a VLAN configuration from a dictionary - to a VLAN interface - """ - - if not vlan.definition['vlan']: - raise TypeError() - - if config['dhcp_client_id']: - vlan.dhcp.v4.options['client_id'] = config['dhcp_client_id'] - - if config['dhcp_hostname']: - vlan.dhcp.v4.options['hostname'] = config['dhcp_hostname'] - - if config['dhcp_vendor_class_id']: - vlan.dhcp.v4.options['vendor_class_id'] = config['dhcp_vendor_class_id'] - - if config['dhcpv6_prm_only']: - vlan.dhcp.v6.options['dhcpv6_prm_only'] = True - - if config['dhcpv6_temporary']: - vlan.dhcp.v6.options['dhcpv6_temporary'] = True - - if config['dhcpv6_pd_length']: - vlan.dhcp.v6.options['dhcpv6_pd_length'] = config['dhcpv6_pd_length'] - - if config['dhcpv6_pd_interfaces']: - vlan.dhcp.v6.options['dhcpv6_pd_interfaces'] = config['dhcpv6_pd_interfaces'] - - # update interface description used e.g. within SNMP - vlan.set_alias(config['description']) - # ignore link state changes - vlan.set_link_detect(config['disable_link_detect']) - # configure ARP filter configuration - vlan.set_arp_filter(config['ip_disable_arp_filter']) - # configure ARP accept - vlan.set_arp_accept(config['ip_enable_arp_accept']) - # configure ARP announce - vlan.set_arp_announce(config['ip_enable_arp_announce']) - # configure ARP ignore - vlan.set_arp_ignore(config['ip_enable_arp_ignore']) - # configure Proxy ARP - vlan.set_proxy_arp(config['ip_proxy_arp']) - # IPv6 accept RA - vlan.set_ipv6_accept_ra(config['ipv6_accept_ra']) - # IPv6 address autoconfiguration - vlan.set_ipv6_autoconf(config['ipv6_autoconf']) - # IPv6 forwarding - vlan.set_ipv6_forwarding(config['ipv6_forwarding']) - # IPv6 Duplicate Address Detection (DAD) tries - vlan.set_ipv6_dad_messages(config['ipv6_dup_addr_detect']) - # Maximum Transmission Unit (MTU) - vlan.set_mtu(config['mtu']) - - # assign/remove VRF (ONLY when not a member of a bridge, - # otherwise 'nomaster' removes it from it) - if not config['is_bridge_member']: - vlan.set_vrf(config['vrf']) - - # Delete old IPv6 EUI64 addresses before changing MAC - for addr in config['ipv6_eui64_prefix_remove']: - vlan.del_ipv6_eui64_address(addr) - - # Change VLAN interface MAC address - if config['mac']: - vlan.set_mac(config['mac']) - - # Add IPv6 EUI-based addresses - for addr in config['ipv6_eui64_prefix']: - vlan.add_ipv6_eui64_address(addr) - - # enable/disable VLAN interface - if config['disable']: - vlan.set_admin_state('down') - else: - vlan.set_admin_state('up') - - # Configure interface address(es) - # - not longer required addresses get removed first - # - newly addresses will be added second - for addr in config['address_remove']: - vlan.del_addr(addr) - for addr in config['address']: - vlan.add_addr(addr) - - # re-add ourselves to any bridge we might have fallen out of - if config['is_bridge_member']: - vlan.add_to_bridge(config['is_bridge_member']) - -def verify_vlan_config(config): - """ - Generic function to verify VLAN config consistency. Instead of re- - implementing this function in multiple places use single source \o/ - """ - - # config['vif'] is a dict with ids as keys and config dicts as values - for vif in config['vif'].values(): - # DHCPv6 parameters-only and temporary address are mutually exclusive - if vif['dhcpv6_prm_only'] and vif['dhcpv6_temporary']: - raise ConfigError('DHCPv6 temporary and parameters-only options are mutually exclusive!') - - if ( vif['is_bridge_member'] - and ( vif['address'] - or vif['ipv6_eui64_prefix'] - or vif['ipv6_autoconf'] ) ): - raise ConfigError(( - f'Cannot assign address to vif interface {vif["intf"]} ' - f'which is a member of bridge {vif["is_bridge_member"]}')) - - if vif['vrf']: - if vif['vrf'] not in interfaces(): - raise ConfigError(f'VRF "{vif["vrf"]}" does not exist') - - if vif['is_bridge_member']: - raise ConfigError(( - f'vif {vif["intf"]} cannot be member of VRF {vif["vrf"]} ' - f'and bridge {vif["is_bridge_member"]} at the same time!')) - - # e.g. wireless interface has no vif_s support - # thus we bail out eraly. - if 'vif_s' not in config.keys(): - return - - # config['vif_s'] is a dict with ids as keys and config dicts as values - for vif_s_id, vif_s in config['vif_s'].items(): - for vif_id, vif in config['vif'].items(): - if vif_id == vif_s_id: - raise ConfigError(( - f'Cannot use identical ID on vif "{vif["intf"]}" ' - f'and vif-s "{vif_s["intf"]}"')) - - # DHCPv6 parameters-only and temporary address are mutually exclusive - if vif_s['dhcpv6_prm_only'] and vif_s['dhcpv6_temporary']: - raise ConfigError(( - 'DHCPv6 temporary and parameters-only options are mutually ' - 'exclusive!')) - - if ( vif_s['is_bridge_member'] - and ( vif_s['address'] - or vif_s['ipv6_eui64_prefix'] - or vif_s['ipv6_autoconf'] ) ): - raise ConfigError(( - f'Cannot assign address to vif-s interface {vif_s["intf"]} ' - f'which is a member of bridge {vif_s["is_bridge_member"]}')) - - if vif_s['vrf']: - if vif_s['vrf'] not in interfaces(): - raise ConfigError(f'VRF "{vif_s["vrf"]}" does not exist') - - if vif_s['is_bridge_member']: - raise ConfigError(( - f'vif-s {vif_s["intf"]} cannot be member of VRF {vif_s["vrf"]} ' - f'and bridge {vif_s["is_bridge_member"]} at the same time!')) - - # vif_c is a dict with ids as keys and config dicts as values - for vif_c in vif_s['vif_c'].values(): - # DHCPv6 parameters-only and temporary address are mutually exclusive - if vif_c['dhcpv6_prm_only'] and vif_c['dhcpv6_temporary']: - raise ConfigError(( - 'DHCPv6 temporary and parameters-only options are ' - 'mutually exclusive!')) - - if ( vif_c['is_bridge_member'] - and ( vif_c['address'] - or vif_c['ipv6_eui64_prefix'] - or vif_c['ipv6_autoconf'] ) ): - raise ConfigError(( - f'Cannot assign address to vif-c interface {vif_c["intf"]} ' - f'which is a member of bridge {vif_c["is_bridge_member"]}')) - - if vif_c['vrf']: - if vif_c['vrf'] not in interfaces(): - raise ConfigError(f'VRF "{vif_c["vrf"]}" does not exist') - - if vif_c['is_bridge_member']: - raise ConfigError(( - f'vif-c {vif_c["intf"]} cannot be member of VRF {vif_c["vrf"]} ' - f'and bridge {vif_c["is_bridge_member"]} at the same time!')) - -- cgit v1.2.3 From e70a304e36fc6456e16fea81ace4a0a5fd8bd1df Mon Sep 17 00:00:00 2001 From: Christian Poessinger <christian@poessinger.com> Date: Sat, 25 Jul 2020 00:39:14 +0200 Subject: ifconfig: T2653: make ifname an optional argument to get_interface_dict() Further reduce the boiler-plate code to determine interface tag node or not. It can be passed into get_interface_dict() if explicitly required - else it is taken from the environment. --- python/vyos/configdict.py | 11 ++++++++--- src/conf_mode/interfaces-bonding.py | 10 ++-------- src/conf_mode/interfaces-bridge.py | 11 ++--------- src/conf_mode/interfaces-dummy.py | 8 +------- src/conf_mode/interfaces-ethernet.py | 8 +------- src/conf_mode/interfaces-geneve.py | 9 +-------- src/conf_mode/interfaces-loopback.py | 8 +------- src/conf_mode/interfaces-macsec.py | 8 +------- src/conf_mode/interfaces-pppoe.py | 8 +------- src/conf_mode/interfaces-pseudo-ethernet.py | 8 +------- src/conf_mode/interfaces-wireless.py | 8 +------- src/conf_mode/interfaces-wirelessmodem.py | 9 +-------- 12 files changed, 21 insertions(+), 85 deletions(-) (limited to 'python/vyos') diff --git a/python/vyos/configdict.py b/python/vyos/configdict.py index 53b5f9492..126d6195a 100644 --- a/python/vyos/configdict.py +++ b/python/vyos/configdict.py @@ -15,8 +15,8 @@ """ A library for retrieving value dicts from VyOS configs in a declarative fashion. - """ +import os import jmespath from enum import Enum @@ -24,7 +24,6 @@ from copy import deepcopy from vyos import ConfigError from vyos.validate import is_member -from vyos.util import ifname_from_config def retrieve_config(path_hash, base_path, config): """ @@ -195,7 +194,7 @@ def get_removed_vlans(conf, dict): return dict -def get_interface_dict(config, base, ifname): +def get_interface_dict(config, base, ifname=''): """ Common utility function to retrieve and mandgle the interfaces available in CLI configuration. All interfaces have a common base ground where the @@ -205,6 +204,12 @@ def get_interface_dict(config, base, ifname): """ from vyos.xml import defaults + if not ifname: + # determine tagNode instance + if 'VYOS_TAGNODE_VALUE' not in os.environ: + raise ConfigError('Interface (VYOS_TAGNODE_VALUE) not specified') + ifname = os.environ['VYOS_TAGNODE_VALUE'] + # retrieve interface default values default_values = defaults(base) diff --git a/src/conf_mode/interfaces-bonding.py b/src/conf_mode/interfaces-bonding.py index 8e87a0059..3b238f1ea 100755 --- a/src/conf_mode/interfaces-bonding.py +++ b/src/conf_mode/interfaces-bonding.py @@ -60,13 +60,7 @@ def get_config(): """ conf = Config() base = ['interfaces', 'bonding'] - - # determine tagNode instance - if 'VYOS_TAGNODE_VALUE' not in os.environ: - raise ConfigError('Interface (VYOS_TAGNODE_VALUE) not specified') - - ifname = os.environ['VYOS_TAGNODE_VALUE'] - bond = get_interface_dict(conf, base, ifname) + bond = get_interface_dict(conf, base) # To make our own life easier transfor the list of member interfaces # into a dictionary - we will use this to add additional information @@ -107,7 +101,7 @@ def get_config(): # Check if we are a member of a bond device tmp = is_member(conf, interface, 'bonding') - if tmp and tmp != ifname: + if tmp and tmp != bond['ifname']: interface_config.update({'is_bond_member' : tmp}) # bond members must not have an assigned address diff --git a/src/conf_mode/interfaces-bridge.py b/src/conf_mode/interfaces-bridge.py index 9c43d1983..ee8e85e73 100755 --- a/src/conf_mode/interfaces-bridge.py +++ b/src/conf_mode/interfaces-bridge.py @@ -41,13 +41,7 @@ def get_config(): """ conf = Config() base = ['interfaces', 'bridge'] - - # determine tagNode instance - if 'VYOS_TAGNODE_VALUE' not in os.environ: - raise ConfigError('Interface (VYOS_TAGNODE_VALUE) not specified') - - ifname = os.environ['VYOS_TAGNODE_VALUE'] - bridge = get_interface_dict(conf, base, ifname) + bridge = get_interface_dict(conf, base) # determine which members have been removed tmp = node_changed(conf, ['member', 'interface']) @@ -69,13 +63,12 @@ def get_config(): # the default dictionary is not properly paged into the dict (see T2665) # thus we will ammend it ourself default_member_values = defaults(base + ['member', 'interface']) - for interface, interface_config in bridge['member']['interface'].items(): interface_config.update(default_member_values) # Check if we are a member of another bridge device tmp = is_member(conf, interface, 'bridge') - if tmp and tmp != ifname: + if tmp and tmp != bridge['ifname']: interface_config.update({'is_bridge_member' : tmp}) # Check if we are a member of a bond device diff --git a/src/conf_mode/interfaces-dummy.py b/src/conf_mode/interfaces-dummy.py index 6d2a78e30..8df86c8ea 100755 --- a/src/conf_mode/interfaces-dummy.py +++ b/src/conf_mode/interfaces-dummy.py @@ -35,13 +35,7 @@ def get_config(): """ conf = Config() base = ['interfaces', 'dummy'] - - # determine tagNode instance - if 'VYOS_TAGNODE_VALUE' not in os.environ: - raise ConfigError('Interface (VYOS_TAGNODE_VALUE) not specified') - - ifname = os.environ['VYOS_TAGNODE_VALUE'] - dummy = get_interface_dict(conf, base, ifname) + dummy = get_interface_dict(conf, base) return dummy def verify(dummy): diff --git a/src/conf_mode/interfaces-ethernet.py b/src/conf_mode/interfaces-ethernet.py index 24ea0af7c..10758e35a 100755 --- a/src/conf_mode/interfaces-ethernet.py +++ b/src/conf_mode/interfaces-ethernet.py @@ -37,13 +37,7 @@ def get_config(): """ conf = Config() base = ['interfaces', 'ethernet'] - - # determine tagNode instance - if 'VYOS_TAGNODE_VALUE' not in os.environ: - raise ConfigError('Interface (VYOS_TAGNODE_VALUE) not specified') - - ifname = os.environ['VYOS_TAGNODE_VALUE'] - ethernet = get_interface_dict(conf, base, ifname) + ethernet = get_interface_dict(conf, base) return ethernet def verify(ethernet): diff --git a/src/conf_mode/interfaces-geneve.py b/src/conf_mode/interfaces-geneve.py index 868ab5ccf..1104bd3c0 100755 --- a/src/conf_mode/interfaces-geneve.py +++ b/src/conf_mode/interfaces-geneve.py @@ -37,14 +37,7 @@ def get_config(): """ conf = Config() base = ['interfaces', 'geneve'] - - # determine tagNode instance - if 'VYOS_TAGNODE_VALUE' not in os.environ: - raise ConfigError('Interface (VYOS_TAGNODE_VALUE) not specified') - - ifname = os.environ['VYOS_TAGNODE_VALUE'] - geneve = get_interface_dict(conf, base, ifname) - + geneve = get_interface_dict(conf, base) return geneve def verify(geneve): diff --git a/src/conf_mode/interfaces-loopback.py b/src/conf_mode/interfaces-loopback.py index 68a1392ff..0398cd591 100755 --- a/src/conf_mode/interfaces-loopback.py +++ b/src/conf_mode/interfaces-loopback.py @@ -32,13 +32,7 @@ def get_config(): """ conf = Config() base = ['interfaces', 'loopback'] - - # determine tagNode instance - if 'VYOS_TAGNODE_VALUE' not in os.environ: - raise ConfigError('Interface (VYOS_TAGNODE_VALUE) not specified') - - ifname = os.environ['VYOS_TAGNODE_VALUE'] - loopback = get_interface_dict(conf, base, ifname) + loopback = get_interface_dict(conf, base) return loopback def verify(loopback): diff --git a/src/conf_mode/interfaces-macsec.py b/src/conf_mode/interfaces-macsec.py index 06aee9ea0..ca15212d4 100755 --- a/src/conf_mode/interfaces-macsec.py +++ b/src/conf_mode/interfaces-macsec.py @@ -42,13 +42,7 @@ def get_config(): """ conf = Config() base = ['interfaces', 'macsec'] - - # determine tagNode instance - if 'VYOS_TAGNODE_VALUE' not in os.environ: - raise ConfigError('Interface (VYOS_TAGNODE_VALUE) not specified') - - ifname = os.environ['VYOS_TAGNODE_VALUE'] - macsec = get_interface_dict(conf, base, ifname) + macsec = get_interface_dict(conf, base) # Check if interface has been removed if 'deleted' in macsec: diff --git a/src/conf_mode/interfaces-pppoe.py b/src/conf_mode/interfaces-pppoe.py index 6947cc1e2..b9a88a949 100755 --- a/src/conf_mode/interfaces-pppoe.py +++ b/src/conf_mode/interfaces-pppoe.py @@ -38,13 +38,7 @@ def get_config(): """ conf = Config() base = ['interfaces', 'pppoe'] - - # determine tagNode instance - if 'VYOS_TAGNODE_VALUE' not in os.environ: - raise ConfigError('Interface (VYOS_TAGNODE_VALUE) not specified') - - ifname = os.environ['VYOS_TAGNODE_VALUE'] - pppoe = get_interface_dict(conf, base, ifname) + pppoe = get_interface_dict(conf, base) # PPPoE is "special" the default MTU is 1492 - update accordingly # as the config_level is already st in get_interface_dict() - we can use [] diff --git a/src/conf_mode/interfaces-pseudo-ethernet.py b/src/conf_mode/interfaces-pseudo-ethernet.py index 55f11e65e..4afea2b3a 100755 --- a/src/conf_mode/interfaces-pseudo-ethernet.py +++ b/src/conf_mode/interfaces-pseudo-ethernet.py @@ -40,13 +40,7 @@ def get_config(): """ conf = Config() base = ['interfaces', 'pseudo-ethernet'] - - # determine tagNode instance - if 'VYOS_TAGNODE_VALUE' not in os.environ: - raise ConfigError('Interface (VYOS_TAGNODE_VALUE) not specified') - - ifname = os.environ['VYOS_TAGNODE_VALUE'] - peth = get_interface_dict(conf, base, ifname) + peth = get_interface_dict(conf, base) mode = leaf_node_changed(conf, ['mode']) if mode: diff --git a/src/conf_mode/interfaces-wireless.py b/src/conf_mode/interfaces-wireless.py index 42b55ee6a..b6f247952 100755 --- a/src/conf_mode/interfaces-wireless.py +++ b/src/conf_mode/interfaces-wireless.py @@ -71,13 +71,7 @@ def get_config(): """ conf = Config() base = ['interfaces', 'wireless'] - - # determine tagNode instance - if 'VYOS_TAGNODE_VALUE' not in os.environ: - raise ConfigError('Interface (VYOS_TAGNODE_VALUE) not specified') - - ifname = os.environ['VYOS_TAGNODE_VALUE'] - wifi = get_interface_dict(conf, base, ifname) + wifi = get_interface_dict(conf, base) if 'security' in wifi and 'wpa' in wifi['security']: wpa_cipher = wifi['security']['wpa'].get('cipher') diff --git a/src/conf_mode/interfaces-wirelessmodem.py b/src/conf_mode/interfaces-wirelessmodem.py index 9a5dae9e0..4081be3c9 100755 --- a/src/conf_mode/interfaces-wirelessmodem.py +++ b/src/conf_mode/interfaces-wirelessmodem.py @@ -48,14 +48,7 @@ def get_config(): """ conf = Config() base = ['interfaces', 'wirelessmodem'] - - # determine tagNode instance - if 'VYOS_TAGNODE_VALUE' not in os.environ: - raise ConfigError('Interface (VYOS_TAGNODE_VALUE) not specified') - - ifname = os.environ['VYOS_TAGNODE_VALUE'] - wwan = get_interface_dict(conf, base, ifname) - + wwan = get_interface_dict(conf, base) return wwan def verify(wwan): -- cgit v1.2.3 From e57d76e86f7e5280eb065e98552c7d6395805c01 Mon Sep 17 00:00:00 2001 From: Christian Poessinger <christian@poessinger.com> Date: Sat, 25 Jul 2020 17:53:32 +0200 Subject: vyos.configverify: T2653: fix some formatting issues --- python/vyos/configverify.py | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'python/vyos') diff --git a/python/vyos/configverify.py b/python/vyos/configverify.py index 36b10c956..8e06d16f2 100644 --- a/python/vyos/configverify.py +++ b/python/vyos/configverify.py @@ -79,12 +79,12 @@ def verify_source_interface(config): required by e.g. peth/MACvlan, MACsec ... """ from netifaces import interfaces - if not 'source_interface' in config.keys(): + if 'source_interface' not in config: raise ConfigError('Physical source-interface required for ' 'interface "{ifname}"'.format(**config)) - if not config['source_interface'] in interfaces(): - raise ConfigError(f'Source interface {source_interface} does not ' - f'exist'.format(**config)) + if config['source_interface'] not in interfaces(): + raise ConfigError('Source interface {source_interface} does not ' + 'exist'.format(**config)) def verify_dhcpv6(config): """ -- cgit v1.2.3