From b050fe61956f710e61d8e3a8139c971a23e702f9 Mon Sep 17 00:00:00 2001
From: Christian Poessinger <christian@poessinger.com>
Date: Wed, 1 May 2019 22:08:21 +0200
Subject: igmpproxy: remove init script which is already provided by Debian
 Buster

---
 src/etc/init.d/igmpproxy | 166 -----------------------------------------------
 1 file changed, 166 deletions(-)
 delete mode 100755 src/etc/init.d/igmpproxy

(limited to 'src')

diff --git a/src/etc/init.d/igmpproxy b/src/etc/init.d/igmpproxy
deleted file mode 100755
index 4a2c94a4d..000000000
--- a/src/etc/init.d/igmpproxy
+++ /dev/null
@@ -1,166 +0,0 @@
-#!/bin/sh
-### BEGIN INIT INFO
-# Provides:          igmpproxy
-# Required-Start:    $local_fs $network $remote_fs $syslog
-# Required-Stop:     $local_fs $network $remote_fs $syslog
-# Default-Start:     2 3 4 5
-# Default-Stop:      0 1 6
-# Short-Description: IGMP multicast routing daemon
-# Description:       IGMPproxy is a simple dynamic Multicast Routing Daemon
-#                    using only IGMP signalling. It's intended for simple
-#                    forwarding of Multicast traffic between networks.
-### END INIT INFO
-
-# Author: Pali Rohár <pali.rohar@gmail.com>
-
-# Do NOT "set -e"
-
-# PATH should only include /usr/* if it runs after the mountnfs.sh script
-PATH=/sbin:/usr/sbin:/bin:/usr/bin
-DESC="igmpproxy"
-NAME=igmpproxy
-DAEMON=/sbin/igmpproxy
-DAEMON_ARGS="/etc/igmpproxy.conf"
-PIDFILE=/var/run/$NAME.pid
-SCRIPTNAME=/etc/init.d/$NAME
-
-# Exit if the package is not installed
-[ -x "$DAEMON" ] || exit 0
-
-# Read configuration variable file if it is present
-[ -r /etc/default/$NAME ] && . /etc/default/$NAME
-
-# Load the VERBOSE setting and other rcS variables
-. /lib/init/vars.sh
-
-# Define LSB log_* functions.
-# Depend on lsb-base (>= 3.2-14) to ensure that this file is present
-# and status_of_proc is working.
-. /lib/lsb/init-functions
-
-#
-# Function that starts the daemon/service
-#
-do_start()
-{
-	# Return
-	#   0 if daemon has been started
-	#   1 if daemon was already running
-	#   2 if daemon could not be started
-	start-stop-daemon --start --quiet --pidfile $PIDFILE --exec $DAEMON --test > /dev/null \
-		|| return 1
-	start-stop-daemon --start --quiet --pidfile $PIDFILE --exec $DAEMON -b -m -- \
-		$DAEMON_OPTS $DAEMON_ARGS \
-		|| return 2
-	# The above code will not work for interpreted scripts, use the next
-	# six lines below instead (Ref: #643337, start-stop-daemon(8) )
-	#start-stop-daemon --start --quiet --pidfile $PIDFILE --startas $DAEMON \
-	#	--name $NAME --test > /dev/null \
-	#	|| return 1
-	#start-stop-daemon --start --quiet --pidfile $PIDFILE --startas $DAEMON \
-	#	--name $NAME -- $DAEMON_ARGS \
-	#	|| return 2
-
-	# Add code here, if necessary, that waits for the process to be ready
-	# to handle requests from services started subsequently which depend
-	# on this one.  As a last resort, sleep for some time.
-}
-
-#
-# Function that stops the daemon/service
-#
-do_stop()
-{
-	# Return
-	#   0 if daemon has been stopped
-	#   1 if daemon was already stopped
-	#   2 if daemon could not be stopped
-	#   other if a failure occurred
-	start-stop-daemon --stop --quiet --retry=TERM/30/KILL/5 --pidfile $PIDFILE --name $NAME
-	RETVAL="$?"
-	[ "$RETVAL" = 2 ] && return 2
-	# Wait for children to finish too if this is a daemon that forks
-	# and if the daemon is only ever run from this initscript.
-	# If the above conditions are not satisfied then add some other code
-	# that waits for the process to drop all resources that could be
-	# needed by services started subsequently.  A last resort is to
-	# sleep for some time.
-	start-stop-daemon --stop --quiet --oknodo --retry=0/30/KILL/5 --exec $DAEMON
-	[ "$?" = 2 ] && return 2
-	# Many daemons don't delete their pidfiles when they exit.
-	rm -f $PIDFILE
-	return "$RETVAL"
-}
-
-#
-# Function that sends a SIGHUP to the daemon/service
-#
-do_reload() {
-	#
-	# If the daemon can reload its configuration without
-	# restarting (for example, when it is sent a SIGHUP),
-	# then implement that here.
-	#
-	start-stop-daemon --stop --signal 1 --quiet --pidfile $PIDFILE --name $NAME
-	return 0
-}
-
-case "$1" in
-  start)
-	[ "$VERBOSE" != no ] && log_daemon_msg "Starting $DESC " "$NAME"
-	do_start
-	case "$?" in
-		0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;;
-		2) [ "$VERBOSE" != no ] && log_end_msg 1 ;;
-	esac
-	;;
-  stop)
-	[ "$VERBOSE" != no ] && log_daemon_msg "Stopping $DESC" "$NAME"
-	do_stop
-	case "$?" in
-		0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;;
-		2) [ "$VERBOSE" != no ] && log_end_msg 1 ;;
-	esac
-	;;
-  status)
-	status_of_proc "$DAEMON" "$NAME" && exit 0 || exit $?
-	;;
-  #reload|force-reload)
-	#
-	# If do_reload() is not implemented then leave this commented out
-	# and leave 'force-reload' as an alias for 'restart'.
-	#
-	#log_daemon_msg "Reloading $DESC" "$NAME"
-	#do_reload
-	#log_end_msg $?
-	#;;
-  restart|force-reload)
-	#
-	# If the "reload" option is implemented then remove the
-	# 'force-reload' alias
-	#
-	log_daemon_msg "Restarting $DESC" "$NAME"
-	do_stop
-	case "$?" in
-	  0|1)
-		do_start
-		case "$?" in
-			0) log_end_msg 0 ;;
-			1) log_end_msg 1 ;; # Old process is still running
-			*) log_end_msg 1 ;; # Failed to start
-		esac
-		;;
-	  *)
-		# Failed to stop
-		log_end_msg 1
-		;;
-	esac
-	;;
-  *)
-	#echo "Usage: $SCRIPTNAME {start|stop|restart|reload|force-reload}" >&2
-	echo "Usage: $SCRIPTNAME {start|stop|status|restart|force-reload}" >&2
-	exit 3
-	;;
-esac
-
-:
-- 
cgit v1.2.3