Internet Protocol over Ethernet (IPoE) Server 900 Network interface to server IPoE Network Layer IPoE serves on L2 L3 ^(L2|L3)$ L2 client share the same subnet L3 clients are behind this router Enables clients to share the same network or each client has its own vlan shared vlan ^(shared|vlan)$ shared Multiple clients share the same network vlan One VLAN per client Client address pool ipv4net IPv4 address and prefix length DHCP requests will be forwarded DHCP Server the request will be redirected to. ipv4 IPv4 address of the DHCP Server address of the relay agent (Relay Agent IP Address) VLAN monitor for the automatic creation of vlans (user per vlan) VLAN ID needs to be between 1 and 4096 VLAN monitor for the automatic creation of vlans (user per vlan) (409[0-6]|40[0-8][0-9]|[1-3][0-9]{3}|[1-9][0-9]{0,2})-(409[0-6]|40[0-8][0-9]|[1-3][0-9]{3}|[1-9][0-9]{0,2}) #include Client IP pools and gateway setting Pool name [-_a-zA-Z0-9]+ Client IP pool is limited to alphanumerical characters and can contain hyphen and underscores #include #include #include Client authentication methods Authetication mode local radius noauth ^(local|radius|noauth)$ local Authentication based on local definition radius Authentication based on a RADIUS server noauth Authentication disabled Network interface the client mac will appear on Client mac address allowed to receive an IP address macaddr Hardware (MAC) address Upload/Download speed limits Upload bandwidth limit in kbits/sec Download bandwidth limit in kbits/sec VLAN-ID of the client network VLAN ID needs to be between 1 and 4096 #include #include