High availability settings 800 Virtual Router Redundancy Protocol settings VRRP global parameters Time VRRP startup process (in seconds) u32:1-600 Interval in seconds Default VRRP version to use, IPv6 always uses VRRP version 3 2 3 u32:2 VRRP version 2 u32:3 VRRP version 3 VRRP group Network interface Advertise interval u32:1-255 Advertise interval in seconds (default: 1) 1 VRRP authentication VRRP password txt Password string (up to 8 characters) .{1,8} Password must not be longer than 8 characters Authentication type plaintext-password ah plaintext-password Simple password string ah AH - IPSEC (not recommended) ^(plaintext-password|ah)$ Authentication type must be plaintext-password or ah Group description #include Health check script Health check failure count required for transition to fault (default: 3) 3 Health check execution interval in seconds (default: 60) 60 Health check script file VRRP hello source address ipv4 IPv4 hello source address ipv6 IPv6 hello source address Unicast VRRP peer address ipv4 IPv4 unicast peer address ipv6 IPv6 unicast peer address Disable master preemption Preempt delay (in seconds) u32:0-1000 preempt delay 0 Router priority (default: 100) u32:1-255 Router priority 100 Use VRRP virtual MAC address as per RFC3768 Track settings Disable track state of main interface Interface name state check txt Interface name #include VRRP transition scripts Script to run on VRRP state transition to master Script to run on VRRP state transition to backup Script to run on VRRP state transition to fault Script to run on VRRP state transition to stop Disable VRRP state checking (deprecated, will be removed in VyOS 1.4) Virtual address (IPv4 or IPv6, but they must not be mixed in one group) ipv4 IPv4 virtual address ipv6 IPv6 virtual address Virtual address must be a valid IPv4 or IPv6 address with prefix length (e.g. 192.0.2.3/24 or 2001:db8:ff::10/64) #include Virtual address (If you need additional IPv4 and IPv6 in same group) ipv4 IP address ipv6 IPv6 address Virtual address must be a valid IPv4 or IPv6 address with prefix length (e.g. 192.0.2.3/24 or 2001:db8:ff::10/64) Virtual router identifier u32:1-255 Virtual router identifier VRRP sync group Sync group member txt VRRP group name high-availability vrrp group VRRP transition scripts Script to run on VRRP state transition to master Script to run on VRRP state transition to backup Script to run on VRRP state transition to fault Script to run on VRRP state transition to stop