# Copyright 2019 VyOS maintainers and contributors # # This library is free software; you can redistribute it and/or # modify it under the terms of the GNU Lesser General Public # License as published by the Free Software Foundation; either # version 2.1 of the License, or (at your option) any later version. # # This library is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # Lesser General Public License for more details. # # You should have received a copy of the GNU Lesser General Public # License along with this library. If not, see . import os import re import jinja2 import json import glob import time from copy import deepcopy import vyos.interfaces from vyos.validate import * from vyos.config import Config from vyos import ConfigError from ipaddress import IPv4Network, IPv6Address from netifaces import ifaddresses, AF_INET, AF_INET6 from subprocess import Popen, PIPE, STDOUT from time import sleep from os.path import isfile from tabulate import tabulate from hurry.filesize import size,alternative from datetime import timedelta dhclient_base = r'/var/lib/dhcp/dhclient_' dhcp_cfg = """ # generated by ifconfig.py option rfc3442-classless-static-routes code 121 = array of unsigned integer 8; timeout 60; retry 300; interface "{{ intf }}" { send host-name "{{ hostname }}"; {% if client_id -%} send dhcp-client-identifier "{{ client_id }}"; {% endif -%} {% if vendor_class_id -%} send vendor-class-identifier "{{ vendor_class_id }}"; {% endif -%} request subnet-mask, broadcast-address, routers, domain-name-servers, rfc3442-classless-static-routes, domain-name, interface-mtu; require subnet-mask; } """ dhcpv6_cfg = """ # generated by ifconfig.py interface "{{ intf }}" { request routers, domain-name-servers, domain-name; } """ class Interface: options = [] required = [] default = { 'type': '', } def __init__(self, ifname, **kargs): """ This is the base interface class which supports basic IP/MAC address operations as well as DHCP(v6). Other interface which represent e.g. and ethernet bridge are implemented as derived classes adding all additional functionality. For creation you will need to provide the interface type, otherwise the existing interface is used DEBUG: This class has embedded debugging (print) which can be enabled by creating the following file: vyos@vyos# touch /tmp/vyos.ifconfig.debug Example: >>> from vyos.ifconfig import Interface >>> i = Interface('eth0') """ self.config = deepcopy(self.default) self.config['ifname'] = ifname for k in self.options: if k not in kargs: raise ConfigError('invalid option {} for {}'.format(k,self.__class__)) self.config[k] = kargs[k] for k in self.required: if k not in self.config: raise ConfigError('missing required option {} for {}'.format(k,self.__class__)) if not os.path.exists('/sys/class/net/{}'.format(self.config['ifname'])): if not self.config['type']: raise Exception('interface "{}" not found'.format(self.config['ifname'])) self._create() # per interface DHCP config files self._dhcp_cfg_file = dhclient_base + self.config['ifname'] + '.conf' self._dhcp_pid_file = dhclient_base + self.config['ifname'] + '.pid' self._dhcp_lease_file = dhclient_base + self.config['ifname'] + '.leases' # per interface DHCPv6 config files self._dhcpv6_cfg_file = dhclient_base + self.config['ifname'] + '.v6conf' self._dhcpv6_pid_file = dhclient_base + self.config['ifname'] + '.v6pid' self._dhcpv6_lease_file = dhclient_base + self.config['ifname'] + '.v6leases' # DHCP options self._dhcp_options = { 'intf' : self.config['ifname'], 'hostname' : '', 'client_id' : '', 'vendor_class_id' : '' } # DHCPv6 options self._dhcpv6_options = { 'intf' : self.config['ifname'], 'dhcpv6_prm_only' : False, 'dhcpv6_temporary' : False } # list of assigned IP addresses self._addr = [] def _create(self): cmd = 'ip link add dev {ifname} type {type}'.format(**self.config) self._cmd(cmd) def _debug_msg(self, msg): if os.path.isfile('/tmp/vyos.ifconfig.debug'): print('DEBUG/{:<6} {}'.format(self.config['ifname'], msg)) def _cmd(self, command): p = Popen(command, stdout=PIPE, stderr=STDOUT, shell=True) tmp = p.communicate()[0].strip() self._debug_msg("cmd '{}'".format(command)) if tmp.decode(): self._debug_msg("returned:\n{}".format(tmp.decode())) # do we need some error checking code here? return tmp.decode() def _read_sysfs(self, filename): """ Provide a single primitive w/ error checking for reading from sysfs. """ value = None with open(filename, 'r') as f: value = f.read().rstrip('\n') self._debug_msg("read '{}' < '{}'".format(value, filename)) return value def _write_sysfs(self, filename, value): """ Provide a single primitive w/ error checking for writing to sysfs. """ self._debug_msg("write '{}' > '{}'".format(value, filename)) with open(filename, 'w') as f: f.write(str(value)) return None def remove(self): """ Remove interface from operating system. Removing the interface deconfigures all assigned IP addresses and clear possible DHCP(v6) client processes. Example: >>> from vyos.ifconfig import Interface >>> i = Interface('eth0') >>> i.remove() """ # stop DHCP(v6) if running self._del_dhcp() self._del_dhcpv6() # remove all assigned IP addresses from interface - this is a bit redundant # as the kernel will remove all addresses on interface deletion, but we # can not delete ALL interfaces, see below for addr in self.get_addr(): self.del_addr(addr) # --------------------------------------------------------------------- # A code refactoring is required as this type check is present as # Interface implement behaviour for one of it's sub-class. # It is required as the current pattern for vlan is: # Interface('name').remove() to delete an interface # The code should be modified to have a class method called connect and # have Interface.connect('name').remove() # each subclass should register within Interface the pattern for that # interface ie: (ethX, etc.) and use this to create an instance of # the right class (EthernetIf, ...) # Ethernet interfaces can not be removed if self.__class__ == EthernetIf: return # --------------------------------------------------------------------- self._delete() def _delete(self): # NOTE (Improvement): # after interface removal no other commands should be allowed # to be called and instead should raise an Exception: cmd = 'ip link del dev {}'.format(self.config['ifname']) return self._cmd(cmd) def get_mtu(self): """ Get/set interface mtu in bytes. Example: >>> from vyos.ifconfig import Interface >>> Interface('eth0').get_mtu() '1500' """ return self._read_sysfs('/sys/class/net/{}/mtu' .format(self.config['ifname'])) def set_mtu(self, mtu): """ Get/set interface mtu in bytes. Example: >>> from vyos.ifconfig import Interface >>> Interface('eth0').set_mtu(1400) >>> Interface('eth0').get_mtu() '1400' """ if mtu < 68 or mtu > 9000: raise ValueError('Invalid MTU size: "{}"'.format(mru)) return self._write_sysfs('/sys/class/net/{}/mtu' .format(self.config['ifname']), mtu) def set_mac(self, mac): """ Set interface MAC (Media Access Contrl) address to given value. Example: >>> from vyos.ifconfig import Interface >>> Interface('eth0').set_mac('00:50:ab:cd:ef:01') """ # on interface removal (ethernet) an empty string is passed - ignore it if not mac: return None # a mac address consits out of 6 octets octets = len(mac.split(':')) if octets != 6: raise ValueError('wrong number of MAC octets: {} '.format(octets)) # validate against the first mac address byte if it's a multicast # address if int(mac.split(':')[0], 16) & 1: raise ValueError('{} is a multicast MAC address'.format(mac)) # overall mac address is not allowed to be 00:00:00:00:00:00 if sum(int(i, 16) for i in mac.split(':')) == 0: raise ValueError('00:00:00:00:00:00 is not a valid MAC address') # check for VRRP mac address if mac.split(':')[0] == '0' and addr.split(':')[1] == '0' and mac.split(':')[2] == '94' and mac.split(':')[3] == '0' and mac.split(':')[4] == '1': raise ValueError('{} is a VRRP MAC address'.format(mac)) # Assemble command executed on system. Unfortunately there is no way # of altering the MAC address via sysfs cmd = 'ip link set dev {} address {}'.format(self.config['ifname'], mac) return self._cmd(cmd) def set_arp_cache_tmo(self, tmo): """ Set ARP cache timeout value in seconds. Internal Kernel representation is in milliseconds. Example: >>> from vyos.ifconfig import Interface >>> Interface('eth0').set_arp_cache_tmo(40) """ return self._write_sysfs('/proc/sys/net/ipv4/neigh/{0}/base_reachable_time_ms' .format(self.config['ifname']), (int(tmo) * 1000)) def set_arp_filter(self, arp_filter): """ Filter ARP requests 1 - Allows you to have multiple network interfaces on the same subnet, and have the ARPs for each interface be answered based on whether or not the kernel would route a packet from the ARP'd IP out that interface (therefore you must use source based routing for this to work). In other words it allows control of which cards (usually 1) will respond to an arp request. 0 - (default) The kernel can respond to arp requests with addresses from other interfaces. This may seem wrong but it usually makes sense, because it increases the chance of successful communication. IP addresses are owned by the complete host on Linux, not by particular interfaces. Only for more complex setups like load- balancing, does this behaviour cause problems. """ if int(arp_filter) >= 0 and int(arp_filter) <= 1: return self._write_sysfs('/proc/sys/net/ipv4/conf/{0}/arp_filter' .format(self.config['ifname']), arp_filter) else: raise ValueError("Value out of range") def set_arp_accept(self, arp_accept): """ Define behavior for gratuitous ARP frames who's IP is not already present in the ARP table: 0 - don't create new entries in the ARP table 1 - create new entries in the ARP table Both replies and requests type gratuitous arp will trigger the ARP table to be updated, if this setting is on. If the ARP table already contains the IP address of the gratuitous arp frame, the arp table will be updated regardless if this setting is on or off. """ if int(arp_accept) >= 0 and int(arp_accept) <= 1: return self._write_sysfs('/proc/sys/net/ipv4/conf/{0}/arp_accept' .format(self.config['ifname']), arp_accept) else: raise ValueError("Value out of range") def set_arp_announce(self, arp_announce): """ Define different restriction levels for announcing the local source IP address from IP packets in ARP requests sent on interface: 0 - (default) Use any local address, configured on any interface 1 - Try to avoid local addresses that are not in the target's subnet for this interface. This mode is useful when target hosts reachable via this interface require the source IP address in ARP requests to be part of their logical network configured on the receiving interface. When we generate the request we will check all our subnets that include the target IP and will preserve the source address if it is from such subnet. Increasing the restriction level gives more chance for receiving answer from the resolved target while decreasing the level announces more valid sender's information. """ if int(arp_announce) >= 0 and int(arp_announce) <= 1: return self._write_sysfs('/proc/sys/net/ipv4/conf/{0}/arp_announce' .format(self.config['ifname']), arp_announce) else: raise ValueError("Value out of range") def set_arp_ignore(self, arp_ignore): """ Define different modes for sending replies in response to received ARP requests that resolve local target IP addresses: 0 - (default): reply for any local target IP address, configured on any interface 1 - reply only if the target IP address is local address configured on the incoming interface """ if int(arp_ignore) >= 0 and int(arp_ignore) <= 1: return self._write_sysfs('/proc/sys/net/ipv4/conf/{0}/arp_ignore' .format(self.config['ifname']), arp_ignore) else: raise ValueError("Value out of range") def set_link_detect(self, link_filter): """ Configure kernel response in packets received on interfaces that are 'down' 0 - Allow packets to be received for the address on this interface even if interface is disabled or no carrier. 1 - Ignore packets received if interface associated with the incoming address is down. 2 - Ignore packets received if interface associated with the incoming address is down or has no carrier. Default value is 0. Note that some distributions enable it in startup scripts. Example: >>> from vyos.ifconfig import Interface >>> Interface('eth0').set_link_detect(1) """ if int(link_filter) >= 0 and int(link_filter) <= 2: return self._write_sysfs('/proc/sys/net/ipv4/conf/{0}/link_filter' .format(self.config['ifname']), link_filter) else: raise ValueError("Value out of range") def set_alias(self, ifalias=None): """ Set interface alias name used by e.g. SNMP Example: >>> from vyos.ifconfig import Interface >>> Interface('eth0').set_alias('VyOS upstream interface') to clear alias e.g. delete it use: >>> Interface('eth0').set_ifalias('') """ if not ifalias: # clear interface alias ifalias = '\0' self._write_sysfs('/sys/class/net/{}/ifalias' .format(self.config['ifname']), ifalias) def get_state(self): """ Enable (up) / Disable (down) an interface Example: >>> from vyos.ifconfig import Interface >>> Interface('eth0').get_state() 'up' """ cmd = 'ip -json link show dev {}'.format(self.config['ifname']) tmp = self._cmd(cmd) out = json.loads(tmp) return out[0]['operstate'].lower() def set_state(self, state): """ Enable (up) / Disable (down) an interface Example: >>> from vyos.ifconfig import Interface >>> Interface('eth0').set_state('down') >>> Interface('eth0').get_state() 'down' """ if state not in ['up', 'down']: raise ValueError('state must be "up" or "down"') # Assemble command executed on system. Unfortunately there is no way # to up/down an interface via sysfs cmd = 'ip link set dev {} {}'.format(self.config['ifname'], state) return self._cmd(cmd) def set_proxy_arp(self, enable): """ Set per interface proxy ARP configuration Example: >>> from vyos.ifconfig import Interface >>> Interface('eth0').set_proxy_arp(1) """ if int(enable) >= 0 and int(enable) <= 1: return self._write_sysfs('/proc/sys/net/ipv4/conf/{}/proxy_arp' .format(self.config['ifname']), enable) else: raise ValueError("Value out of range") def set_proxy_arp_pvlan(self, enable): """ Private VLAN proxy arp. Basically allow proxy arp replies back to the same interface (from which the ARP request/solicitation was received). This is done to support (ethernet) switch features, like RFC 3069, where the individual ports are NOT allowed to communicate with each other, but they are allowed to talk to the upstream router. As described in RFC 3069, it is possible to allow these hosts to communicate through the upstream router by proxy_arp'ing. Don't need to be used together with proxy_arp. This technology is known by different names: In RFC 3069 it is called VLAN Aggregation. Cisco and Allied Telesyn call it Private VLAN. Hewlett-Packard call it Source-Port filtering or port-isolation. Ericsson call it MAC-Forced Forwarding (RFC Draft). Example: >>> from vyos.ifconfig import Interface >>> Interface('eth0').set_proxy_arp_pvlan(1) """ if int(enable) >= 0 and int(enable) <= 1: return self._write_sysfs('/proc/sys/net/ipv4/conf/{}/proxy_arp_pvlan' .format(self.config['ifname']), enable) else: raise ValueError("Value out of range") def get_addr(self): """ Retrieve assigned IPv4 and IPv6 addresses from given interface. This is done using the netifaces and ipaddress python modules. Example: >>> from vyos.ifconfig import Interface >>> Interface('eth0').get_addrs() ['172.16.33.30/24', 'fe80::20c:29ff:fe11:a174/64'] """ ipv4 = [] ipv6 = [] if AF_INET in ifaddresses(self.config['ifname']).keys(): for v4_addr in ifaddresses(self.config['ifname'])[AF_INET]: # we need to manually assemble a list of IPv4 address/prefix prefix = '/' + \ str(IPv4Network('0.0.0.0/' + v4_addr['netmask']).prefixlen) ipv4.append(v4_addr['addr'] + prefix) if AF_INET6 in ifaddresses(self.config['ifname']).keys(): for v6_addr in ifaddresses(self.config['ifname'])[AF_INET6]: # Note that currently expanded netmasks are not supported. That means # 2001:db00::0/24 is a valid argument while 2001:db00::0/ffff:ff00:: not. # see https://docs.python.org/3/library/ipaddress.html bits = bin( int(v6_addr['netmask'].replace(':', ''), 16)).count('1') prefix = '/' + str(bits) # we alsoneed to remove the interface suffix on link local # addresses v6_addr['addr'] = v6_addr['addr'].split('%')[0] ipv6.append(v6_addr['addr'] + prefix) return ipv4 + ipv6 def add_addr(self, addr): """ Add IP(v6) address to interface. Address is only added if it is not already assigned to that interface. addr: can be an IPv4 address, IPv6 address, dhcp or dhcpv6! IPv4: add IPv4 address to interface IPv6: add IPv6 address to interface dhcp: start dhclient (IPv4) on interface dhcpv6: start dhclient (IPv6) on interface Example: >>> from vyos.ifconfig import Interface >>> j = Interface('eth0') >>> j.add_addr('192.0.2.1/24') >>> j.add_addr('2001:db8::ffff/64') >>> j.get_addr() ['192.0.2.1/24', '2001:db8::ffff/64'] """ # cache new IP address which is assigned to interface self._addr.append(addr) # we can not have both DHCP and static IPv4 addresses assigned to an interface if 'dhcp' in self._addr: for addr in self._addr: # do not change below 'if' ordering esle you will get an exception as: # ValueError: 'dhcp' does not appear to be an IPv4 or IPv6 address if addr != 'dhcp' and is_ipv4(addr): raise ConfigError("Can't configure both static IPv4 and DHCP address on the same interface") if addr == 'dhcp': self._set_dhcp() elif addr == 'dhcpv6': self._set_dhcpv6() else: if not is_intf_addr_assigned(self.config['ifname'], addr): cmd = 'ip addr add "{}" dev "{}"'.format(addr, self.config['ifname']) return self._cmd(cmd) def del_addr(self, addr): """ Delete IP(v6) address to interface. Address is only added if it is assigned to that interface. addr: can be an IPv4 address, IPv6 address, dhcp or dhcpv6! IPv4: delete IPv4 address from interface IPv6: delete IPv6 address from interface dhcp: stop dhclient (IPv4) on interface dhcpv6: stop dhclient (IPv6) on interface Example: >>> from vyos.ifconfig import Interface >>> j = Interface('eth0') >>> j.add_addr('2001:db8::ffff/64') >>> j.add_addr('192.0.2.1/24') >>> j.get_addr() ['192.0.2.1/24', '2001:db8::ffff/64'] >>> j.del_addr('192.0.2.1/24') >>> j.get_addr() ['2001:db8::ffff/64'] """ if addr == 'dhcp': self._del_dhcp() elif addr == 'dhcpv6': self._del_dhcpv6() else: if is_intf_addr_assigned(self.config['ifname'], addr): cmd = 'ip addr del "{}" dev "{}"'.format(addr, self.config['ifname']) return self._cmd(cmd) def get_dhcp_options(self): """ Return dictionary with supported DHCP options. Dictionary should be altered and send back via set_dhcp_options() so those options are applied when DHCP is run. """ return self._dhcp_options def set_dhcp_options(self, options): """ Store new DHCP options used by next run of DHCP client. """ self._dhcp_options = options def get_dhcpv6_options(self): """ Return dictionary with supported DHCPv6 options. Dictionary should be altered and send back via set_dhcp_options() so those options are applied when DHCP is run. """ return self._dhcpv6_options def set_dhcpv6_options(self, options): """ Store new DHCP options used by next run of DHCP client. """ self._dhcpv6_options = options # replace dhcpv4/v6 with systemd.networkd? def _set_dhcp(self): """ Configure interface as DHCP client. The dhclient binary is automatically started in background! Example: >>> from vyos.ifconfig import Interface >>> j = Interface('eth0') >>> j.set_dhcp() """ dhcp = self.get_dhcp_options() if not dhcp['hostname']: # read configured system hostname. # maybe change to vyos hostd client ??? with open('/etc/hostname', 'r') as f: dhcp['hostname'] = f.read().rstrip('\n') # render DHCP configuration tmpl = jinja2.Template(dhcp_cfg) dhcp_text = tmpl.render(dhcp) with open(self._dhcp_cfg_file, 'w') as f: f.write(dhcp_text) cmd = 'start-stop-daemon --start --quiet --pidfile ' + \ self._dhcp_pid_file cmd += ' --exec /sbin/dhclient --' # now pass arguments to dhclient binary cmd += ' -4 -nw -cf {} -pf {} -lf {} {}'.format( self._dhcp_cfg_file, self._dhcp_pid_file, self._dhcp_lease_file, self.config['ifname']) return self._cmd(cmd) def _del_dhcp(self): """ De-configure interface as DHCP clinet. All auto generated files like pid, config and lease will be removed. Example: >>> from vyos.ifconfig import Interface >>> j = Interface('eth0') >>> j.del_dhcp() """ pid = 0 if os.path.isfile(self._dhcp_pid_file): with open(self._dhcp_pid_file, 'r') as f: pid = int(f.read()) else: self._debug_msg('No DHCP client PID found') return None # stop dhclient, we need to call dhclient and tell it should release the # aquired IP address. tcpdump tells me: # 172.16.35.103.68 > 172.16.35.254.67: [bad udp cksum 0xa0cb -> 0xb943!] BOOTP/DHCP, Request from 00:50:56:9d:11:df, length 300, xid 0x620e6946, Flags [none] (0x0000) # Client-IP 172.16.35.103 # Client-Ethernet-Address 00:50:56:9d:11:df # Vendor-rfc1048 Extensions # Magic Cookie 0x63825363 # DHCP-Message Option 53, length 1: Release # Server-ID Option 54, length 4: 172.16.35.254 # Hostname Option 12, length 10: "vyos" # cmd = '/sbin/dhclient -cf {} -pf {} -lf {} -r {}'.format( self._dhcp_cfg_file, self._dhcp_pid_file, self._dhcp_lease_file, self.config['ifname']) self._cmd(cmd) # cleanup old config file if os.path.isfile(self._dhcp_cfg_file): os.remove(self._dhcp_cfg_file) # cleanup old pid file if os.path.isfile(self._dhcp_pid_file): os.remove(self._dhcp_pid_file) # cleanup old lease file if os.path.isfile(self._dhcp_lease_file): os.remove(self._dhcp_lease_file) def _set_dhcpv6(self): """ Configure interface as DHCPv6 client. The dhclient binary is automatically started in background! Example: >>> from vyos.ifconfig import Interface >>> j = Interface('eth0') >>> j.set_dhcpv6() """ dhcpv6 = self.get_dhcpv6_options() # better save then sorry .. should be checked in interface script # but if you missed it we are safe! if dhcpv6['dhcpv6_prm_only'] and dhcpv6['dhcpv6_temporary']: raise Exception('DHCPv6 temporary and parameters-only options are mutually exclusive!') # render DHCP configuration tmpl = jinja2.Template(dhcpv6_cfg) dhcpv6_text = tmpl.render(dhcpv6) with open(self._dhcpv6_cfg_file, 'w') as f: f.write(dhcpv6_text) # https://bugs.launchpad.net/ubuntu/+source/ifupdown/+bug/1447715 # # wee need to wait for IPv6 DAD to finish once and interface is added # this suxx :-( sleep(5) # no longer accept router announcements on this interface self._write_sysfs('/proc/sys/net/ipv6/conf/{}/accept_ra' .format(self.config['ifname']), 0) # assemble command-line to start DHCPv6 client (dhclient) cmd = 'start-stop-daemon --start --quiet --pidfile ' + \ self._dhcpv6_pid_file cmd += ' --exec /sbin/dhclient --' # now pass arguments to dhclient binary cmd += ' -6 -nw -cf {} -pf {} -lf {}'.format( self._dhcpv6_cfg_file, self._dhcpv6_pid_file, self._dhcpv6_lease_file) # add optional arguments if dhcpv6['dhcpv6_prm_only']: cmd += ' -S' if dhcpv6['dhcpv6_temporary']: cmd += ' -T' cmd += ' {}'.format(self.config['ifname']) return self._cmd(cmd) def _del_dhcpv6(self): """ De-configure interface as DHCPv6 clinet. All auto generated files like pid, config and lease will be removed. Example: >>> from vyos.ifconfig import Interface >>> j = Interface('eth0') >>> j.del_dhcpv6() """ pid = 0 if os.path.isfile(self._dhcpv6_pid_file): with open(self._dhcpv6_pid_file, 'r') as f: pid = int(f.read()) else: self._debug_msg('No DHCPv6 client PID found') return None # stop dhclient cmd = 'start-stop-daemon --stop --quiet --pidfile {}'.format(self._dhcpv6_pid_file) self._cmd(cmd) # accept router announcements on this interface self._write_sysfs('/proc/sys/net/ipv6/conf/{}/accept_ra' .format(self.config['ifname']), 1) # cleanup old config file if os.path.isfile(self._dhcpv6_cfg_file): os.remove(self._dhcpv6_cfg_file) # cleanup old pid file if os.path.isfile(self._dhcpv6_pid_file): os.remove(self._dhcpv6_pid_file) # cleanup old lease file if os.path.isfile(self._dhcpv6_lease_file): os.remove(self._dhcpv6_lease_file) def op_show_interface_stats(self): stats = self.get_interface_stats() rx = [['bytes','packets','errors','dropped','overrun','mcast'],[stats['rx_bytes'],stats['rx_packets'],stats['rx_errors'],stats['rx_dropped'],stats['rx_over_errors'],stats['multicast']]] tx = [['bytes','packets','errors','dropped','carrier','collisions'],[stats['tx_bytes'],stats['tx_packets'],stats['tx_errors'],stats['tx_dropped'],stats['tx_carrier_errors'],stats['collisions']]] output = "RX: \n" output += tabulate(rx,headers="firstrow",numalign="right",tablefmt="plain") output += "\n\nTX: \n" output += tabulate(tx,headers="firstrow",numalign="right",tablefmt="plain") print(' '.join(('\n'+output.lstrip()).splitlines(True))) def get_interface_stats(self): interface_stats = dict() devices = [f for f in glob.glob("/sys/class/net/**/statistics")] for dev_path in devices: metrics = [f for f in glob.glob(dev_path +"/**")] dev = re.findall(r"/sys/class/net/(.*)/statistics",dev_path)[0] dev_dict = dict() for metric_path in metrics: metric = metric_path.replace(dev_path+"/","") if isfile(metric_path): data = open(metric_path, 'r').read()[:-1] dev_dict[metric] = int(data) interface_stats[dev] = dev_dict return interface_stats[self.config['ifname']] class LoopbackIf(Interface): """ The loopback device is a special, virtual network interface that your router uses to communicate with itself. """ default = { 'type': 'loopback', } def __init__(self, ifname, **kargs): super().__init__(ifname, **kargs) def remove(self): """ Loopback interface can not be deleted from operating system. We can only remove all assigned IP addresses. Example: >>> from vyos.ifconfig import Interface >>> i = LoopbackIf('lo').remove() """ # remove all assigned IP addresses from interface for addr in self.get_addr(): if addr in ["127.0.0.1/8", "::1/128"]: # Do not allow deletion of the default loopback addresses as # this will cause weird system behavior like snmp/ssh no longer # operating as expected, see https://phabricator.vyos.net/T2034. continue self.del_addr(addr) class DummyIf(Interface): """ A dummy interface is entirely virtual like, for example, the loopback interface. The purpose of a dummy interface is to provide a device to route packets through without actually transmitting them. """ default = { 'type': 'dummy', } def __init__(self, ifname, **kargs): super().__init__(ifname, **kargs) class STPIf(Interface): """ A spanning-tree capable interface. This applies only to bridge port member interfaces! """ default = { 'type': 'stp', } def __init__(self, ifname, **kargs): super().__init__(ifname, **kargs) def set_path_cost(self, cost): """ Set interface path cost, only relevant for STP enabled interfaces Example: >>> from vyos.ifconfig import Interface >>> Interface('eth0').set_path_cost(4) """ if not os.path.isfile('/sys/class/net/{}/brport/path_cost' .format(self.config['ifname'])): raise TypeError('{} is not a bridge port member'.format(self.config['ifname'])) return self._write_sysfs('/sys/class/net/{}/brport/path_cost' .format(self.config['ifname']), cost) def set_path_priority(self, priority): """ Set interface path priority, only relevant for STP enabled interfaces Example: >>> from vyos.ifconfig import Interface >>> Interface('eth0').set_path_priority(4) """ if not os.path.isfile('/sys/class/net/{}/brport/priority' .format(self.config['ifname'])): raise TypeError('{} is not a bridge port member'.format(self.config['ifname'])) return self._write_sysfs('/sys/class/net/{}/brport/priority' .format(self.config['ifname']), priority) class BridgeIf(Interface): """ A bridge is a way to connect two Ethernet segments together in a protocol independent way. Packets are forwarded based on Ethernet address, rather than IP address (like a router). Since forwarding is done at Layer 2, all protocols can go transparently through a bridge. The Linux bridge code implements a subset of the ANSI/IEEE 802.1d standard. """ default = { 'type': 'bridge', } def __init__(self, ifname, **kargs): super().__init__(ifname, **kargs) def set_ageing_time(self, time): """ Set bridge interface MAC address aging time in seconds. Internal kernel representation is in centiseconds. Kernel default is 300 seconds. Example: >>> from vyos.ifconfig import BridgeIf >>> BridgeIf('br0').ageing_time(2) """ time = int(time) * 100 return self._write_sysfs('/sys/class/net/{}/bridge/ageing_time' .format(self.config['ifname']), time) def set_forward_delay(self, time): """ Set bridge forwarding delay in seconds. Internal Kernel representation is in centiseconds. Example: >>> from vyos.ifconfig import BridgeIf >>> BridgeIf('br0').forward_delay(15) """ return self._write_sysfs('/sys/class/net/{}/bridge/forward_delay' .format(self.config['ifname']), (int(time) * 100)) def set_hello_time(self, time): """ Set bridge hello time in seconds. Internal Kernel representation is in centiseconds. Example: >>> from vyos.ifconfig import BridgeIf >>> BridgeIf('br0').set_hello_time(2) """ return self._write_sysfs('/sys/class/net/{}/bridge/hello_time' .format(self.config['ifname']), (int(time) * 100)) def set_max_age(self, time): """ Set bridge max message age in seconds. Internal Kernel representation is in centiseconds. Example: >>> from vyos.ifconfig import Interface >>> BridgeIf('br0').set_max_age(30) """ return self._write_sysfs('/sys/class/net/{}/bridge/max_age' .format(self.config['ifname']), (int(time) * 100)) def set_priority(self, priority): """ Set bridge max aging time in seconds. Example: >>> from vyos.ifconfig import BridgeIf >>> BridgeIf('br0').set_priority(8192) """ return self._write_sysfs('/sys/class/net/{}/bridge/priority' .format(self.config['ifname']), priority) def set_stp(self, state): """ Set bridge STP (Spanning Tree) state. 0 -> STP disabled, 1 -> STP enabled Example: >>> from vyos.ifconfig import BridgeIf >>> BridgeIf('br0').set_stp(1) """ if int(state) >= 0 and int(state) <= 1: return self._write_sysfs('/sys/class/net/{}/bridge/stp_state' .format(self.config['ifname']), state) else: raise ValueError("Value out of range") def set_multicast_querier(self, enable): """ Sets whether the bridge actively runs a multicast querier or not. When a bridge receives a 'multicast host membership' query from another network host, that host is tracked based on the time that the query was received plus the multicast query interval time. Use enable=1 to enable or enable=0 to disable Example: >>> from vyos.ifconfig import Interface >>> BridgeIf('br0').set_multicast_querier(1) """ if int(enable) >= 0 and int(enable) <= 1: return self._write_sysfs('/sys/class/net/{}/bridge/multicast_querier' .format(self.config['ifname']), enable) else: raise ValueError("Value out of range") def add_port(self, interface): """ Add physical interface to bridge (member port) Example: >>> from vyos.ifconfig import Interface >>> BridgeIf('br0').add_port('eth0') >>> BridgeIf('br0').add_port('eth1') """ cmd = 'ip link set dev {} master {}'.format(interface, self.config['ifname']) return self._cmd(cmd) def del_port(self, interface): """ Remove member port from bridge instance. Example: >>> from vyos.ifconfig import Interface >>> BridgeIf('br0').del_port('eth1') """ cmd = 'ip link set dev {} nomaster'.format(interface) return self._cmd(cmd) class VLANIf(Interface): """ This class handels the creation and removal of a VLAN interface. It serves as base class for BondIf and EthernetIf. """ default = { 'type': 'vlan', } def __init__(self, ifname, **kargs): super().__init__(ifname, **kargs) def remove(self): """ Remove interface from operating system. Removing the interface deconfigures all assigned IP addresses and clear possible DHCP(v6) client processes. Example: >>> from vyos.ifconfig import Interface >>> i = Interface('eth0') >>> i.remove() """ # Do we have sub interfaces (VLANs)? We apply a regex matching # subinterfaces (indicated by a .) of a parent interface. # # As interfaces need to be deleted "in order" starting from Q-in-Q # we delete them first. vlan_ifs = [f for f in os.listdir(r'/sys/class/net') \ if re.match(self.config['ifname'] + r'(?:\.\d+)(?:\.\d+)', f)] for vlan in vlan_ifs: Interface(vlan).remove() # After deleting all Q-in-Q interfaces delete other VLAN interfaces # which probably acted as parent to Q-in-Q or have been regular 802.1q # interface. vlan_ifs = [f for f in os.listdir(r'/sys/class/net') \ if re.match(self.config['ifname'] + r'(?:\.\d+)', f)] for vlan in vlan_ifs: Interface(vlan).remove() # All subinterfaces are now removed, continue on the physical interface super().remove() def add_vlan(self, vlan_id, ethertype='', ingress_qos='', egress_qos=''): """ A virtual LAN (VLAN) is any broadcast domain that is partitioned and isolated in a computer network at the data link layer (OSI layer 2). Use this function to create a new VLAN interface on a given physical interface. This function creates both 802.1q and 802.1ad (Q-in-Q) interfaces. Proto parameter is used to indicate VLAN type. A new object of type VLANIf is returned once the interface has been created. @param ethertype: If specified, create 802.1ad or 802.1q Q-in-Q VLAN interface @param ingress_qos: Defines a mapping of VLAN header prio field to the Linux internal packet priority on incoming frames. @param ingress_qos: Defines a mapping of Linux internal packet priority to VLAN header prio field but for outgoing frames. Example: >>> from vyos.ifconfig import VLANIf >>> i = VLANIf('eth0') >>> i.add_vlan(10) """ vlan_ifname = self.config['ifname'] + '.' + str(vlan_id) if not os.path.exists('/sys/class/net/{}'.format(vlan_ifname)): self._vlan_id = int(vlan_id) if ethertype: self._ethertype = ethertype ethertype = 'proto {}'.format(ethertype) # Optional ingress QOS mapping opt_i = '' if ingress_qos: opt_i = 'ingress-qos-map ' + ingress_qos # Optional egress QOS mapping opt_e = '' if egress_qos: opt_e = 'egress-qos-map ' + egress_qos # create interface in the system cmd = 'ip link add link {intf} name {intf}.{vlan} type vlan {proto} id {vlan} {opt_e} {opt_i}' \ .format(intf=self.config['ifname'], vlan=self._vlan_id, proto=ethertype, opt_e=opt_e, opt_i=opt_i) self._cmd(cmd) # return new object mapping to the newly created interface # we can now work on this object for e.g. IP address setting # or interface description and so on return VLANIf(vlan_ifname) def del_vlan(self, vlan_id): """ Remove VLAN interface from operating system. Removing the interface deconfigures all assigned IP addresses and clear possible DHCP(v6) client processes. Example: >>> from vyos.ifconfig import VLANIf >>> i = VLANIf('eth0.10') >>> i.del_vlan() """ vlan_ifname = self.config['ifname'] + '.' + str(vlan_id) VLANIf(vlan_ifname).remove() class EthernetIf(VLANIf): """ Abstraction of a Linux Ethernet Interface """ default = { 'type': 'ethernet', } def __init__(self, ifname, **kargs): super().__init__(ifname, **kargs) def _delete (self): # Ethernet interfaces can not be removed pass def get_driver_name(self): """ Return the driver name used by NIC. Some NICs don't support all features e.g. changing link-speed, duplex Example: >>> from vyos.ifconfig import EthernetIf >>> i = EthernetIf('eth0') >>> i.get_driver_name() 'vmxnet3' """ link = os.readlink('/sys/class/net/{}/device/driver/module'.format(self.config['ifname'])) return os.path.basename(link) def set_flow_control(self, enable): """ Changes the pause parameters of the specified Ethernet device. @param enable: true -> enable pause frames, false -> disable pause frames Example: >>> from vyos.ifconfig import EthernetIf >>> i = EthernetIf('eth0') >>> i.set_flow_control(True) """ if enable not in ['on', 'off']: raise ValueError("Value out of range") if self.get_driver_name() in ['vmxnet3', 'virtio_net']: self._debug_msg('{} driver does not support changing flow control settings!' .format(self.get_driver_name())) return # Get current flow control settings: cmd = '/sbin/ethtool --show-pause {0}'.format(self.config['ifname']) tmp = self._cmd(cmd) # The above command returns - with tabs: # # Pause parameters for eth0: # Autonegotiate: on # RX: off # TX: off if re.search("Autonegotiate:\ton", tmp): if enable == "on": # flowcontrol is already enabled - no need to re-enable it again # this will prevent the interface from flapping as applying the # flow-control settings will take the interface down and bring # it back up every time. return # Assemble command executed on system. Unfortunately there is no way # to change this setting via sysfs cmd = '/sbin/ethtool --pause {0} autoneg {1} tx {1} rx {1}'.format( self.config['ifname'], enable) try: # An exception will be thrown if the settings are not changed return self._cmd(cmd) except CalledProcessError: pass def set_speed_duplex(self, speed, duplex): """ Set link speed in Mbit/s and duplex. @speed can be any link speed in MBit/s, e.g. 10, 100, 1000 auto @duplex can be half, full, auto Example: >>> from vyos.ifconfig import EthernetIf >>> i = EthernetIf('eth0') >>> i.set_speed_duplex('auto', 'auto') """ if speed not in ['auto', '10', '100', '1000', '2500', '5000', '10000', '25000', '40000', '50000', '100000', '400000']: raise ValueError("Value out of range (speed)") if duplex not in ['auto', 'full', 'half']: raise ValueError("Value out of range (duplex)") if self.get_driver_name() in ['vmxnet3', 'virtio_net']: self._debug_msg('{} driver does not support changing speed/duplex settings!' .format(self.get_driver_name())) return # Get current speed and duplex settings: cmd = '/sbin/ethtool {0}'.format(self.config['ifname']) tmp = self._cmd(cmd) if re.search("\tAuto-negotiation: on", tmp): if speed == 'auto' and duplex == 'auto': # bail out early as nothing is to change return else: # read in current speed and duplex settings cur_speed = 0 cur_duplex = '' for line in tmp.splitlines(): if line.lstrip().startswith("Speed:"): non_decimal = re.compile(r'[^\d.]+') cur_speed = non_decimal.sub('', line) continue if line.lstrip().startswith("Duplex:"): cur_duplex = line.split()[-1].lower() break if (cur_speed == speed) and (cur_duplex == duplex): # bail out early as nothing is to change return cmd = '/sbin/ethtool -s {}'.format(self.config['ifname']) if speed == 'auto' or duplex == 'auto': cmd += ' autoneg on' else: cmd += ' speed {} duplex {} autoneg off'.format(speed, duplex) return self._cmd(cmd) def set_gro(self, state): """ Example: >>> from vyos.ifconfig import EthernetIf >>> i = EthernetIf('eth0') >>> i.set_gro('on') """ if state not in ['on', 'off']: raise ValueError('state must be "on" or "off"') cmd = '/sbin/ethtool -K {} gro {}'.format(self.config['ifname'], state) return self._cmd(cmd) def set_gso(self, state): """ Example: >>> from vyos.ifconfig import EthernetIf >>> i = EthernetIf('eth0') >>> i.set_gso('on') """ if state not in ['on', 'off']: raise ValueError('state must be "on" or "off"') cmd = '/sbin/ethtool -K {} gso {}'.format(self.config['ifname'], state) return self._cmd(cmd) def set_sg(self, state): """ Example: >>> from vyos.ifconfig import EthernetIf >>> i = EthernetIf('eth0') >>> i.set_sg('on') """ if state not in ['on', 'off']: raise ValueError('state must be "on" or "off"') cmd = '/sbin/ethtool -K {} sg {}'.format(self.config['ifname'], state) return self._cmd(cmd) def set_tso(self, state): """ Example: >>> from vyos.ifconfig import EthernetIf >>> i = EthernetIf('eth0') >>> i.set_tso('on') """ if state not in ['on', 'off']: raise ValueError('state must be "on" or "off"') cmd = '/sbin/ethtool -K {} tso {}'.format(self.config['ifname'], state) return self._cmd(cmd) def set_ufo(self, state): """ Example: >>> from vyos.ifconfig import EthernetIf >>> i = EthernetIf('eth0') >>> i.set_udp_offload('on') """ if state not in ['on', 'off']: raise ValueError('state must be "on" or "off"') cmd = '/sbin/ethtool -K {} ufo {}'.format(self.config['ifname'], state) return self._cmd(cmd) class MACVLANIf(VLANIf): """ Abstraction of a Linux MACvlan interface """ options = VLANIf.options + ['link', 'mode'] default = { 'type': 'macvlan', } def __init__(self, ifname, **kargs): super().__init__(ifname, **kargs) def _create(self): cmd = 'ip link add {intf} link {link} type macvlan mode {mode}'.format(**self.config) self._cmd(cmd) @staticmethod def get_config(): """ VXLAN interfaces require a configuration when they are added using iproute2. This static method will provide the configuration dictionary used by this class. Example: >> dict = MACVLANIf().get_config() """ config = { 'address': '', 'link': 0, 'mode': '' } return config def set_mode(self, mode): """ """ cmd = 'ip link set dev {} type macvlan mode {}'.format(self.config['ifname'], mode) return self._cmd(cmd) class BondIf(VLANIf): """ The Linux bonding driver provides a method for aggregating multiple network interfaces into a single logical "bonded" interface. The behavior of the bonded interfaces depends upon the mode; generally speaking, modes provide either hot standby or load balancing services. Additionally, link integrity monitoring may be performed. """ default = { 'type': 'bond', } def __init__(self, ifname, **kargs): super().__init__(ifname, **kargs) def remove(self): """ Remove interface from operating system. Removing the interface deconfigures all assigned IP addresses and clear possible DHCP(v6) client processes. Example: >>> from vyos.ifconfig import Interface >>> i = Interface('eth0') >>> i.remove() """ # when a bond member gets deleted, all members are placed in A/D state # even when they are enabled inside CLI. This will make the config # and system look async. slave_list = [] for s in self.get_slaves(): slave = { 'ifname' : s, 'state': Interface(s).get_state() } slave_list.append(slave) # remove bond master which places members in disabled state super().remove() # replicate previous interface state before bond destruction back to # physical interface for slave in slave_list: i = Interface(slave['ifname']) i.set_state(slave['state']) def set_hash_policy(self, mode): """ Selects the transmit hash policy to use for slave selection in balance-xor, 802.3ad, and tlb modes. Possible values are: layer2, layer2+3, layer3+4, encap2+3, encap3+4. The default value is layer2 Example: >>> from vyos.ifconfig import BondIf >>> BondIf('bond0').set_hash_policy('layer2+3') """ if not mode in ['layer2', 'layer2+3', 'layer3+4', 'encap2+3', 'encap3+4']: raise ValueError("Value out of range") return self._write_sysfs('/sys/class/net/{}/bonding/xmit_hash_policy' .format(self.config['ifname']), mode) def set_arp_interval(self, interval): """ Specifies the ARP link monitoring frequency in milliseconds. The ARP monitor works by periodically checking the slave devices to determine whether they have sent or received traffic recently (the precise criteria depends upon the bonding mode, and the state of the slave). Regular traffic is generated via ARP probes issued for the addresses specified by the arp_ip_target option. If ARP monitoring is used in an etherchannel compatible mode (modes 0 and 2), the switch should be configured in a mode that evenly distributes packets across all links. If the switch is configured to distribute the packets in an XOR fashion, all replies from the ARP targets will be received on the same link which could cause the other team members to fail. value of 0 disables ARP monitoring. The default value is 0. Example: >>> from vyos.ifconfig import BondIf >>> BondIf('bond0').set_arp_interval('100') """ if int(interval) == 0: """ Specifies the MII link monitoring frequency in milliseconds. This determines how often the link state of each slave is inspected for link failures. A value of zero disables MII link monitoring. A value of 100 is a good starting point. """ return self._write_sysfs('/sys/class/net/{}/bonding/miimon' .format(self.config['ifname']), interval) else: return self._write_sysfs('/sys/class/net/{}/bonding/arp_interval' .format(self.config['ifname']), interval) def get_arp_ip_target(self): """ Specifies the IP addresses to use as ARP monitoring peers when arp_interval is > 0. These are the targets of the ARP request sent to determine the health of the link to the targets. Specify these values in ddd.ddd.ddd.ddd format. Multiple IP addresses must be separated by a comma. At least one IP address must be given for ARP monitoring to function. The maximum number of targets that can be specified is 16. The default value is no IP addresses. Example: >>> from vyos.ifconfig import BondIf >>> BondIf('bond0').get_arp_ip_target() '192.0.2.1' """ return self._read_sysfs('/sys/class/net/{}/bonding/arp_ip_target' .format(self.config['ifname'])) def set_arp_ip_target(self, target): """ Specifies the IP addresses to use as ARP monitoring peers when arp_interval is > 0. These are the targets of the ARP request sent to determine the health of the link to the targets. Specify these values in ddd.ddd.ddd.ddd format. Multiple IP addresses must be separated by a comma. At least one IP address must be given for ARP monitoring to function. The maximum number of targets that can be specified is 16. The default value is no IP addresses. Example: >>> from vyos.ifconfig import BondIf >>> BondIf('bond0').set_arp_ip_target('192.0.2.1') >>> BondIf('bond0').get_arp_ip_target() '192.0.2.1' """ return self._write_sysfs('/sys/class/net/{}/bonding/arp_ip_target' .format(self.config['ifname']), target) def add_port(self, interface): """ Enslave physical interface to bond. Example: >>> from vyos.ifconfig import BondIf >>> BondIf('bond0').add_port('eth0') >>> BondIf('bond0').add_port('eth1') """ # An interface can only be added to a bond if it is in 'down' state. If # interface is in 'up' state, the following Kernel error will be thrown: # bond0: eth1 is up - this may be due to an out of date ifenslave. Interface(interface).set_state('down') return self._write_sysfs('/sys/class/net/{}/bonding/slaves' .format(self.config['ifname']), '+' + interface) def del_port(self, interface): """ Remove physical port from bond Example: >>> from vyos.ifconfig import BondIf >>> BondIf('bond0').del_port('eth1') """ return self._write_sysfs('/sys/class/net/{}/bonding/slaves' .format(self.config['ifname']), '-' + interface) def get_slaves(self): """ Return a list with all configured slave interfaces on this bond. Example: >>> from vyos.ifconfig import BondIf >>> BondIf('bond0').get_slaves() ['eth1', 'eth2'] """ enslaved_ifs = [] # retrieve real enslaved interfaces from OS kernel sysfs_bond = '/sys/class/net/{}'.format(self.config['ifname']) if os.path.isdir(sysfs_bond): for directory in os.listdir(sysfs_bond): if 'lower_' in directory: enslaved_ifs.append(directory.replace('lower_','')) return enslaved_ifs def set_primary(self, interface): """ A string (eth0, eth2, etc) specifying which slave is the primary device. The specified device will always be the active slave while it is available. Only when the primary is off-line will alternate devices be used. This is useful when one slave is preferred over another, e.g., when one slave has higher throughput than another. The primary option is only valid for active-backup, balance-tlb and balance-alb mode. Example: >>> from vyos.ifconfig import BondIf >>> BondIf('bond0').set_primary('eth2') """ if not interface: # reset primary interface interface = '\0' return self._write_sysfs('/sys/class/net/{}/bonding/primary' .format(self.config['ifname']), interface) def set_mode(self, mode): """ Specifies one of the bonding policies. The default is balance-rr (round robin). Possible values are: balance-rr, active-backup, balance-xor, broadcast, 802.3ad, balance-tlb, balance-alb NOTE: the bonding mode can not be changed when the bond itself has slaves Example: >>> from vyos.ifconfig import BondIf >>> BondIf('bond0').set_mode('802.3ad') """ if not mode in [ 'balance-rr', 'active-backup', 'balance-xor', 'broadcast', '802.3ad', 'balance-tlb', 'balance-alb']: raise ValueError("Value out of range") return self._write_sysfs('/sys/class/net/{}/bonding/mode' .format(self.config['ifname']), mode) class WireGuardIf(Interface): options = ['port', 'private-key', 'pubkey', 'psk', 'allowed-ips', 'fwmark', 'endpoint', 'keepalive'] default = { 'type': 'wireguard', 'port': 0, 'private-key': None, 'pubkey': None, 'psk': '/dev/null', 'allowed-ips': [], 'fwmark': 0x00, 'endpoint': None, 'keepalive': 0 } """ Wireguard interface class, contains a comnfig dictionary since wireguard VPN is being comnfigured via the wg command rather than writing the config into a file. Otherwise if a pre-shared key is used (symetric enryption key), it would we exposed within multiple files. Currently it's only within the config.boot if the config was saved. Example: >>> from vyos.ifconfig import WireGuardIf as wg_if >>> wg_intfc = wg_if("wg01") >>> print (wg_intfc.wg_config) {'private-key': None, 'keepalive': 0, 'endpoint': None, 'port': 0, 'allowed-ips': [], 'pubkey': None, 'fwmark': 0, 'psk': '/dev/null'} >>> wg_intfc.wg_config['keepalive'] = 100 >>> print (wg_intfc.wg_config) {'private-key': None, 'keepalive': 100, 'endpoint': None, 'port': 0, 'allowed-ips': [], 'pubkey': None, 'fwmark': 0, 'psk': '/dev/null'} """ def __init__(self, ifname, **kargs): super().__init__(ifname, **kargs) def update(self): if not self.config['private-key']: raise ValueError("private key required") else: # fmask permission check? pass cmd = "wg set {} ".format(self.config['ifname']) cmd += "listen-port {} ".format(self.config['port']) cmd += "fwmark {} ".format(str(self.config['fwmark'])) cmd += "private-key {} ".format(self.config['private-key']) cmd += "peer {} ".format(self.config['pubkey']) cmd += " preshared-key {} ".format(self.config['psk']) cmd += " allowed-ips " for aip in self.config['allowed-ips']: if aip != self.config['allowed-ips'][-1]: cmd += aip + "," else: cmd += aip if self.config['endpoint']: cmd += " endpoint {}".format(self.config['endpoint']) cmd += " persistent-keepalive {}".format(self.config['keepalive']) self._cmd(cmd) # remove psk since it isn't required anymore and is saved in the cli # config only !! if self.config['psk'] != '/dev/null': if os.path.exists(self.config['psk']): os.remove(self.config['psk']) def remove_peer(self, peerkey): """ Remove a peer of an interface, peers are identified by their public key. Giving it a readable name is a vyos feature, to remove a peer the pubkey and the interface is needed, to remove the entry. """ cmd = "wg set {0} peer {1} remove".format( self.config['ifname'], str(peerkey)) return self._cmd(cmd) def op_show_interface(self): wgdump = vyos.interfaces.wireguard_dump().get(self.config['ifname'],None) c = Config() c.set_level(["interfaces","wireguard",self.config['ifname']]) description = c.return_effective_value(["description"]) ips = c.return_effective_values(["address"]) print ("interface: {}".format(self.config['ifname'])) if (description): print (" description: {}".format(description)) if (ips): print (" address: {}".format(", ".join(ips))) print (" public key: {}".format(wgdump['public_key'])) print (" private key: (hidden)") print (" listening port: {}".format(wgdump['listen_port'])) print () for peer in c.list_effective_nodes(["peer"]): if wgdump['peers']: pubkey = c.return_effective_value(["peer",peer,"pubkey"]) if pubkey in wgdump['peers']: wgpeer = wgdump['peers'][pubkey] print (" peer: {}".format(peer)) print (" public key: {}".format(pubkey)) """ figure out if the tunnel is recently active or not """ status = "inactive" if (wgpeer['latest_handshake'] is None): """ no handshake ever """ status = "inactive" else: if int(wgpeer['latest_handshake']) > 0: delta = timedelta(seconds=int(time.time() - wgpeer['latest_handshake'])) print (" latest handshake: {}".format(delta)) if (time.time() - int(wgpeer['latest_handshake']) < (60*5)): """ Five minutes and the tunnel is still active """ status = "active" else: """ it's been longer than 5 minutes """ status = "inactive" elif int(wgpeer['latest_handshake']) == 0: """ no handshake ever """ status = "inactive" print (" status: {}".format(status)) if wgpeer['endpoint'] is not None: print (" endpoint: {}".format(wgpeer['endpoint'])) if wgpeer['allowed_ips'] is not None: print (" allowed ips: {}".format(",".join(wgpeer['allowed_ips']).replace(",",", "))) if wgpeer['transfer_rx'] > 0 or wgpeer['transfer_tx'] > 0: rx_size =size(wgpeer['transfer_rx'],system=alternative) tx_size =size(wgpeer['transfer_tx'],system=alternative) print (" transfer: {} received, {} sent".format(rx_size,tx_size)) if wgpeer['persistent_keepalive'] is not None: print (" persistent keepalive: every {} seconds".format(wgpeer['persistent_keepalive'])) print() super().op_show_interface_stats() class VXLANIf(Interface): """ The VXLAN protocol is a tunnelling protocol designed to solve the problem of limited VLAN IDs (4096) in IEEE 802.1q. With VXLAN the size of the identifier is expanded to 24 bits (16777216). VXLAN is described by IETF RFC 7348, and has been implemented by a number of vendors. The protocol runs over UDP using a single destination port. This document describes the Linux kernel tunnel device, there is also a separate implementation of VXLAN for Openvswitch. Unlike most tunnels, a VXLAN is a 1 to N network, not just point to point. A VXLAN device can learn the IP address of the other endpoint either dynamically in a manner similar to a learning bridge, or make use of statically-configured forwarding entries. For more information please refer to: https://www.kernel.org/doc/Documentation/networking/vxlan.txt """ default = { 'type': 'vxlan', 'vni': 0, 'dev': '', 'group': '', 'remote': '', 'port': 8472, # The Linux implementation of VXLAN pre-dates # the IANA's selection of a standard destination port } def __init__(self, ifname, **kargs): super().__init__(ifname, **kargs) def _create(self): # we assume that by default a multicast interface is created group = 'group {}'.format(self.config['group']) # if remote host is specified we ignore the multicast address if config['remote']: group = 'remote {}'.format(self.config['remote']) # an underlay device is not always specified dev = '' if self.config['dev']: dev = 'dev {}'.format(self.config['dev']) cmd = 'ip link add {intf} type vxlan id {vni} {grp_rem} {dev} dstport {port}' \ .format(intf=self.config['ifname'], vni=self.config['vni'], grp_rem=group, dev=dev, port=self.config['port']) self._cmd(cmd) @staticmethod def get_config(): """ VXLAN interfaces require a configuration when they are added using iproute2. This static method will provide the configuration dictionary used by this class. Example: >> dict = VXLANIf().get_config() """ config = { 'vni': 0, 'dev': '', 'group': '', 'port': 8472, # The Linux implementation of VXLAN pre-dates # the IANA's selection of a standard destination port 'remote': '' } return config class GeneveIf(Interface): """ Geneve: Generic Network Virtualization Encapsulation For more information please refer to: https://tools.ietf.org/html/draft-gross-geneve-00 https://www.redhat.com/en/blog/what-geneve https://developers.redhat.com/blog/2019/05/17/an-introduction-to-linux-virtual-interfaces-tunnels/#geneve https://lwn.net/Articles/644938/ """ default = { 'type': 'geneve', } def __init__(self, ifname, **kargs): super().__init__(ifname, **kargs) def _create (self): cmd = 'ip link add name {} type geneve id {} remote {}' \ .format(self.config['ifname'], config['vni'], config['remote']) self._cmd(cmd) # interface is always A/D down. It needs to be enabled explicitly self.set_state('down') @staticmethod def get_config(): """ GENEVE interfaces require a configuration when they are added using iproute2. This static method will provide the configuration dictionary used by this class. Example: >> dict = GeneveIf().get_config() """ config = { 'vni': 0, 'remote': '' } return config class L2TPv3If(Interface): """ The Linux bonding driver provides a method for aggregating multiple network interfaces into a single logical "bonded" interface. The behavior of the bonded interfaces depends upon the mode; generally speaking, modes provide either hot standby or load balancing services. Additionally, link integrity monitoring may be performed. """ options = Interface.options + \ ['tunnel_id','peer_tunnel_id','local_port','remote_port','encapsulation','local_address','remote_address'] default = { 'type': 'l2tp', } def __init__(self, ifname, **kargs): super().__init__(ifname, **kargs) def _create (self): # create tunnel interface cmd = 'ip l2tp add tunnel tunnel_id {} '.format(config['tunnel_id']) cmd += 'peer_tunnel_id {} '.format(config['peer_tunnel_id']) cmd += 'udp_sport {} '.format(config['local_port']) cmd += 'udp_dport {} '.format(config['remote_port']) cmd += 'encap {} '.format(config['encapsulation']) cmd += 'local {} '.format(config['local_address']) cmd += 'remote {} '.format(config['remote_address']) self._cmd(cmd) # setup session cmd = 'ip l2tp add session name {} '.format(self.config['ifname']) cmd += 'tunnel_id {} '.format(config['tunnel_id']) cmd += 'session_id {} '.format(config['session_id']) cmd += 'peer_session_id {} '.format(config['peer_session_id']) self._cmd(cmd) # interface is always A/D down. It needs to be enabled explicitly self.set_state('down') def remove(self): """ Remove interface from operating system. Removing the interface deconfigures all assigned IP addresses. Example: >>> from vyos.ifconfig import L2TPv3If >>> i = L2TPv3If('l2tpeth0') >>> i.remove() """ if os.path.exists('/sys/class/net/{}'.format(self.config['ifname'])): # interface is always A/D down. It needs to be enabled explicitly self.set_state('down') if self._config['tunnel_id'] and self._config['session_id']: cmd = 'ip l2tp del session tunnel_id {} '.format(self._config['tunnel_id']) cmd += 'session_id {} '.format(self._config['session_id']) self._cmd(cmd) if self._config['tunnel_id']: cmd = 'ip l2tp del tunnel tunnel_id {} '.format(self._config['tunnel_id']) self._cmd(cmd) @staticmethod def get_config(): """ L2TPv3 interfaces require a configuration when they are added using iproute2. This static method will provide the configuration dictionary used by this class. Example: >> dict = L2TPv3If().get_config() """ config = { 'peer_tunnel_id': '', 'local_port': 0, 'remote_port': 0, 'encapsulation': 'udp', 'local_address': '', 'remote_address': '', 'session_id': '', 'tunnel_id': '', 'peer_session_id': '' } return config