# Copyright 2019 VyOS maintainers and contributors # # This library is free software; you can redistribute it and/or # modify it under the terms of the GNU Lesser General Public # License as published by the Free Software Foundation; either # version 2.1 of the License, or (at your option) any later version. # # This library is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # Lesser General Public License for more details. # # You should have received a copy of the GNU Lesser General Public # License along with this library. If not, see . import os from vyos.ifconfig.interface import Interface from vyos.ifconfig.vlan import VLAN from vyos.util import cmd from vyos.util import vyos_dict_search from vyos.validate import assert_list from vyos.validate import assert_positive @Interface.register @VLAN.enable class BondIf(Interface): """ The Linux bonding driver provides a method for aggregating multiple network interfaces into a single logical "bonded" interface. The behavior of the bonded interfaces depends upon the mode; generally speaking, modes provide either hot standby or load balancing services. Additionally, link integrity monitoring may be performed. """ default = { 'type': 'bond', } definition = { **Interface.definition, ** { 'section': 'bonding', 'prefixes': ['bond', ], 'broadcast': True, 'bridgeable': True, }, } _sysfs_set = {**Interface._sysfs_set, **{ 'bond_hash_policy': { 'validate': lambda v: assert_list(v, ['layer2', 'layer2+3', 'layer3+4', 'encap2+3', 'encap3+4']), 'location': '/sys/class/net/{ifname}/bonding/xmit_hash_policy', }, 'bond_min_links': { 'validate': assert_positive, 'location': '/sys/class/net/{ifname}/bonding/min_links', }, 'bond_miimon': { 'validate': assert_positive, 'location': '/sys/class/net/{ifname}/bonding/miimon' }, 'bond_arp_interval': { 'validate': assert_positive, 'location': '/sys/class/net/{ifname}/bonding/arp_interval' }, 'bond_arp_ip_target': { # XXX: no validation of the IP 'location': '/sys/class/net/{ifname}/bonding/arp_ip_target', }, 'bond_add_port': { 'location': '/sys/class/net/{ifname}/bonding/slaves', }, 'bond_del_port': { 'location': '/sys/class/net/{ifname}/bonding/slaves', }, 'bond_primary': { 'convert': lambda name: name if name else '\0', 'location': '/sys/class/net/{ifname}/bonding/primary', }, 'bond_mode': { 'validate': lambda v: assert_list(v, ['balance-rr', 'active-backup', 'balance-xor', 'broadcast', '802.3ad', 'balance-tlb', 'balance-alb']), 'location': '/sys/class/net/{ifname}/bonding/mode', }, }} _sysfs_get = {**Interface._sysfs_get, **{ 'bond_arp_ip_target': { 'location': '/sys/class/net/{ifname}/bonding/arp_ip_target', } }} def remove(self): """ Remove interface from operating system. Removing the interface deconfigures all assigned IP addresses and clear possible DHCP(v6) client processes. Example: >>> from vyos.ifconfig import Interface >>> i = Interface('eth0') >>> i.remove() """ # when a bond member gets deleted, all members are placed in A/D state # even when they are enabled inside CLI. This will make the config # and system look async. slave_list = [] for s in self.get_slaves(): slave = { 'ifname': s, 'state': Interface(s).get_admin_state() } slave_list.append(slave) # remove bond master which places members in disabled state super().remove() # replicate previous interface state before bond destruction back to # physical interface for slave in slave_list: i = Interface(slave['ifname']) i.set_admin_state(slave['state']) def set_hash_policy(self, mode): """ Selects the transmit hash policy to use for slave selection in balance-xor, 802.3ad, and tlb modes. Possible values are: layer2, layer2+3, layer3+4, encap2+3, encap3+4. The default value is layer2 Example: >>> from vyos.ifconfig import BondIf >>> BondIf('bond0').set_hash_policy('layer2+3') """ self.set_interface('bond_hash_policy', mode) def set_min_links(self, number): """ Specifies the minimum number of links that must be active before asserting carrier. It is similar to the Cisco EtherChannel min-links feature. This allows setting the minimum number of member ports that must be up (link-up state) before marking the bond device as up (carrier on). This is useful for situations where higher level services such as clustering want to ensure a minimum number of low bandwidth links are active before switchover. This option only affect 802.3ad mode. The default value is 0. This will cause carrier to be asserted (for 802.3ad mode) whenever there is an active aggregator, regardless of the number of available links in that aggregator. Note that, because an aggregator cannot be active without at least one available link, setting this option to 0 or to 1 has the exact same effect. Example: >>> from vyos.ifconfig import BondIf >>> BondIf('bond0').set_min_links('0') """ self.set_interface('bond_min_links', number) def set_arp_interval(self, interval): """ Specifies the ARP link monitoring frequency in milliseconds. The ARP monitor works by periodically checking the slave devices to determine whether they have sent or received traffic recently (the precise criteria depends upon the bonding mode, and the state of the slave). Regular traffic is generated via ARP probes issued for the addresses specified by the arp_ip_target option. If ARP monitoring is used in an etherchannel compatible mode (modes 0 and 2), the switch should be configured in a mode that evenly distributes packets across all links. If the switch is configured to distribute the packets in an XOR fashion, all replies from the ARP targets will be received on the same link which could cause the other team members to fail. value of 0 disables ARP monitoring. The default value is 0. Example: >>> from vyos.ifconfig import BondIf >>> BondIf('bond0').set_arp_interval('100') """ if int(interval) == 0: """ Specifies the MII link monitoring frequency in milliseconds. This determines how often the link state of each slave is inspected for link failures. A value of zero disables MII link monitoring. A value of 100 is a good starting point. """ return self.set_interface('bond_miimon', interval) else: return self.set_interface('bond_arp_interval', interval) def get_arp_ip_target(self): """ Specifies the IP addresses to use as ARP monitoring peers when arp_interval is > 0. These are the targets of the ARP request sent to determine the health of the link to the targets. Specify these values in ddd.ddd.ddd.ddd format. Multiple IP addresses must be separated by a comma. At least one IP address must be given for ARP monitoring to function. The maximum number of targets that can be specified is 16. The default value is no IP addresses. Example: >>> from vyos.ifconfig import BondIf >>> BondIf('bond0').get_arp_ip_target() '192.0.2.1' """ # As this function might also be called from update() of a VLAN interface # we must check if the bond_arp_ip_target retrieval worked or not - as this # can not be set for a bond vif interface try: return self.get_interface('bond_arp_ip_target') except FileNotFoundError: return '' def set_arp_ip_target(self, target): """ Specifies the IP addresses to use as ARP monitoring peers when arp_interval is > 0. These are the targets of the ARP request sent to determine the health of the link to the targets. Specify these values in ddd.ddd.ddd.ddd format. Multiple IP addresses must be separated by a comma. At least one IP address must be given for ARP monitoring to function. The maximum number of targets that can be specified is 16. The default value is no IP addresses. Example: >>> from vyos.ifconfig import BondIf >>> BondIf('bond0').set_arp_ip_target('192.0.2.1') >>> BondIf('bond0').get_arp_ip_target() '192.0.2.1' """ return self.set_interface('bond_arp_ip_target', target) def add_port(self, interface): """ Enslave physical interface to bond. Example: >>> from vyos.ifconfig import BondIf >>> BondIf('bond0').add_port('eth0') >>> BondIf('bond0').add_port('eth1') """ # From drivers/net/bonding/bond_main.c: # ... # bond_set_slave_link_state(new_slave, # BOND_LINK_UP, # BOND_SLAVE_NOTIFY_NOW); # ... # # The kernel will ALWAYS place new bond members in "up" state regardless # what the CLI will tell us! # Physical interface must be in admin down state before they can be # enslaved. If this is not the case an error will be shown: # bond0: eth0 is up - this may be due to an out of date ifenslave slave = Interface(interface) slave_state = slave.get_admin_state() if slave_state == 'up': slave.set_admin_state('down') ret = self.set_interface('bond_add_port', f'+{interface}') # The kernel will ALWAYS place new bond members in "up" state regardless # what the LI is configured for - thus we place the interface in its # desired state slave.set_admin_state(slave_state) return ret def del_port(self, interface): """ Remove physical port from bond Example: >>> from vyos.ifconfig import BondIf >>> BondIf('bond0').del_port('eth1') """ return self.set_interface('bond_del_port', f'-{interface}') def get_slaves(self): """ Return a list with all configured slave interfaces on this bond. Example: >>> from vyos.ifconfig import BondIf >>> BondIf('bond0').get_slaves() ['eth1', 'eth2'] """ enslaved_ifs = [] # retrieve real enslaved interfaces from OS kernel sysfs_bond = '/sys/class/net/{}'.format(self.config['ifname']) if os.path.isdir(sysfs_bond): for directory in os.listdir(sysfs_bond): if 'lower_' in directory: enslaved_ifs.append(directory.replace('lower_', '')) return enslaved_ifs def set_primary(self, interface): """ A string (eth0, eth2, etc) specifying which slave is the primary device. The specified device will always be the active slave while it is available. Only when the primary is off-line will alternate devices be used. This is useful when one slave is preferred over another, e.g., when one slave has higher throughput than another. The primary option is only valid for active-backup, balance-tlb and balance-alb mode. Example: >>> from vyos.ifconfig import BondIf >>> BondIf('bond0').set_primary('eth2') """ return self.set_interface('bond_primary', interface) def set_mode(self, mode): """ Specifies one of the bonding policies. The default is balance-rr (round robin). Possible values are: balance-rr, active-backup, balance-xor, broadcast, 802.3ad, balance-tlb, balance-alb NOTE: the bonding mode can not be changed when the bond itself has slaves Example: >>> from vyos.ifconfig import BondIf >>> BondIf('bond0').set_mode('802.3ad') """ return self.set_interface('bond_mode', mode) def update(self, config): """ General helper function which works on a dictionary retrived by get_config_dict(). It's main intention is to consolidate the scattered interface setup code and provide a single point of entry when workin on any interface. """ # use ref-counting function to place an interface into admin down state. # set_admin_state_up() must be called the same amount of times else the # interface won't come up. This can/should be used to prevent link flapping # when changing interface parameters require the interface to be down. # We will disable it once before reconfiguration and enable it afterwards. if 'shutdown_required' in config: self.set_admin_state('down') # call base class first super().update(config) # ARP monitor targets need to be synchronized between sysfs and CLI. # Unfortunately an address can't be send twice to sysfs as this will # result in the following exception: OSError: [Errno 22] Invalid argument. # # We remove ALL addresses prior to adding new ones, this will remove # addresses manually added by the user too - but as we are limited to 16 adresses # from the kernel side this looks valid to me. We won't run into an error # when a user added manual adresses which would result in having more # then 16 adresses in total. arp_tgt_addr = list(map(str, self.get_arp_ip_target().split())) for addr in arp_tgt_addr: self.set_arp_ip_target('-' + addr) # Add configured ARP target addresses value = vyos_dict_search('arp_monitor.target', config) if isinstance(value, str): value = [value] if value: for addr in value: self.set_arp_ip_target('+' + addr) # Bonding transmit hash policy value = config.get('hash_policy') if value: self.set_hash_policy(value) # Minimum number of member interfaces value = config.get('min_links') if value: self.set_min_links(value) # Some interface options can only be changed if the interface is # administratively down if self.get_admin_state() == 'down': # Delete bond member port(s) for interface in self.get_slaves(): self.del_port(interface) # Bonding policy/mode value = config.get('mode') if value: self.set_mode(value) # Add (enslave) interfaces to bond value = vyos_dict_search('member.interface', config) if value: for interface in value: # if we've come here we already verified the interface # does not have an addresses configured so just flush # any remaining ones Interface(interface).flush_addrs() self.add_port(interface) # Primary device interface - must be set after 'mode' value = config.get('primary') if value: self.set_primary(value) # Enable/Disable of an interface must always be done at the end of the # derived class to make use of the ref-counting set_admin_state() # function. We will only enable the interface if 'up' was called as # often as 'down'. This is required by some interface implementations # as certain parameters can only be changed when the interface is # in admin-down state. This ensures the link does not flap during # reconfiguration. state = 'down' if 'disable' in config else 'up' self.set_admin_state(state)