# Copyright 2019-2021 VyOS maintainers and contributors <maintainers@vyos.io> # # This library is free software; you can redistribute it and/or # modify it under the terms of the GNU Lesser General Public # License as published by the Free Software Foundation; either # version 2.1 of the License, or (at your option) any later version. # # This library is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # Lesser General Public License for more details. # # You should have received a copy of the GNU Lesser General Public # License along with this library. If not, see <http://www.gnu.org/licenses/>. from netifaces import interfaces import json from vyos.ifconfig.interface import Interface from vyos.validate import assert_boolean from vyos.validate import assert_positive from vyos.util import cmd from vyos.util import dict_search from vyos.configdict import get_vlan_ids from vyos.configdict import list_diff @Interface.register class BridgeIf(Interface): """ A bridge is a way to connect two Ethernet segments together in a protocol independent way. Packets are forwarded based on Ethernet address, rather than IP address (like a router). Since forwarding is done at Layer 2, all protocols can go transparently through a bridge. The Linux bridge code implements a subset of the ANSI/IEEE 802.1d standard. """ iftype = 'bridge' definition = { **Interface.definition, **{ 'section': 'bridge', 'prefixes': ['br', ], 'broadcast': True, 'vlan': True, }, } _sysfs_get = { **Interface._sysfs_get,**{ 'vlan_filter': { 'location': '/sys/class/net/{ifname}/bridge/vlan_filtering' } } } _sysfs_set = {**Interface._sysfs_set, **{ 'ageing_time': { 'validate': assert_positive, 'convert': lambda t: int(t) * 100, 'location': '/sys/class/net/{ifname}/bridge/ageing_time', }, 'forward_delay': { 'validate': assert_positive, 'convert': lambda t: int(t) * 100, 'location': '/sys/class/net/{ifname}/bridge/forward_delay', }, 'hello_time': { 'validate': assert_positive, 'convert': lambda t: int(t) * 100, 'location': '/sys/class/net/{ifname}/bridge/hello_time', }, 'max_age': { 'validate': assert_positive, 'convert': lambda t: int(t) * 100, 'location': '/sys/class/net/{ifname}/bridge/max_age', }, 'priority': { 'validate': assert_positive, 'location': '/sys/class/net/{ifname}/bridge/priority', }, 'stp': { 'validate': assert_boolean, 'location': '/sys/class/net/{ifname}/bridge/stp_state', }, 'vlan_filter': { 'validate': assert_boolean, 'location': '/sys/class/net/{ifname}/bridge/vlan_filtering', }, 'multicast_querier': { 'validate': assert_boolean, 'location': '/sys/class/net/{ifname}/bridge/multicast_querier', }, }} _command_set = {**Interface._command_set, **{ 'add_port': { 'shellcmd': 'ip link set dev {value} master {ifname}', }, 'del_port': { 'shellcmd': 'ip link set dev {value} nomaster', }, }} def get_vlan_filter(self): """ Get the status of the bridge VLAN filter """ return self.get_interface('vlan_filter') def set_ageing_time(self, time): """ Set bridge interface MAC address aging time in seconds. Internal kernel representation is in centiseconds. Kernel default is 300 seconds. Example: >>> from vyos.ifconfig import BridgeIf >>> BridgeIf('br0').ageing_time(2) """ self.set_interface('ageing_time', time) def set_forward_delay(self, time): """ Set bridge forwarding delay in seconds. Internal Kernel representation is in centiseconds. Example: >>> from vyos.ifconfig import BridgeIf >>> BridgeIf('br0').forward_delay(15) """ self.set_interface('forward_delay', time) def set_hello_time(self, time): """ Set bridge hello time in seconds. Internal Kernel representation is in centiseconds. Example: >>> from vyos.ifconfig import BridgeIf >>> BridgeIf('br0').set_hello_time(2) """ self.set_interface('hello_time', time) def set_max_age(self, time): """ Set bridge max message age in seconds. Internal Kernel representation is in centiseconds. Example: >>> from vyos.ifconfig import Interface >>> BridgeIf('br0').set_max_age(30) """ self.set_interface('max_age', time) def set_priority(self, priority): """ Set bridge max aging time in seconds. Example: >>> from vyos.ifconfig import BridgeIf >>> BridgeIf('br0').set_priority(8192) """ self.set_interface('priority', priority) def set_stp(self, state): """ Set bridge STP (Spanning Tree) state. 0 -> STP disabled, 1 -> STP enabled Example: >>> from vyos.ifconfig import BridgeIf >>> BridgeIf('br0').set_stp(1) """ self.set_interface('stp', state) def set_vlan_filter(self, state): """ Set bridge Vlan Filter state. 0 -> Vlan Filter disabled, 1 -> Vlan Filter enabled Example: >>> from vyos.ifconfig import BridgeIf >>> BridgeIf('br0').set_vlan_filter(1) """ self.set_interface('vlan_filter', state) def set_multicast_querier(self, enable): """ Sets whether the bridge actively runs a multicast querier or not. When a bridge receives a 'multicast host membership' query from another network host, that host is tracked based on the time that the query was received plus the multicast query interval time. Use enable=1 to enable or enable=0 to disable Example: >>> from vyos.ifconfig import Interface >>> BridgeIf('br0').set_multicast_querier(1) """ self.set_interface('multicast_querier', enable) def add_port(self, interface): """ Add physical interface to bridge (member port) Example: >>> from vyos.ifconfig import Interface >>> BridgeIf('br0').add_port('eth0') >>> BridgeIf('br0').add_port('eth1') """ # Bridge port handling of wireless interfaces is done by hostapd. if 'wlan' in interface: return try: return self.set_interface('add_port', interface) except: from vyos import ConfigError raise ConfigError('Error: Device does not allow enslaving to a bridge.') def del_port(self, interface): """ Remove member port from bridge instance. Example: >>> from vyos.ifconfig import Interface >>> BridgeIf('br0').del_port('eth1') """ return self.set_interface('del_port', interface) def update(self, config): """ General helper function which works on a dictionary retrived by get_config_dict(). It's main intention is to consolidate the scattered interface setup code and provide a single point of entry when workin on any interface. """ # Set ageing time value = config.get('aging') self.set_ageing_time(value) # set bridge forward delay value = config.get('forwarding_delay') self.set_forward_delay(value) # set hello time value = config.get('hello_time') self.set_hello_time(value) # set max message age value = config.get('max_age') self.set_max_age(value) # set bridge priority value = config.get('priority') self.set_priority(value) # enable/disable spanning tree value = '1' if 'stp' in config else '0' self.set_stp(value) # enable or disable IGMP querier tmp = dict_search('igmp.querier', config) value = '1' if (tmp != None) else '0' self.set_multicast_querier(value) # remove interface from bridge tmp = dict_search('member.interface_remove', config) for member in (tmp or []): if member in interfaces(): self.del_port(member) # enable/disable Vlan Filter vlan_filter = '1' if 'enable_vlan' in config else '0' self.set_vlan_filter(vlan_filter) ifname = config['ifname'] if int(vlan_filter): add_vlan = [] cur_vlan_ids = get_vlan_ids(ifname) tmp = dict_search('vif', config) if tmp: for vif, vif_config in tmp.items(): add_vlan.append(vif) # Remove redundant VLANs from the system for vlan in list_diff(cur_vlan_ids, add_vlan): cmd = f'bridge vlan del dev {ifname} vid {vlan} self' self._cmd(cmd) for vlan in add_vlan: cmd = f'bridge vlan add dev {ifname} vid {vlan} self' self._cmd(cmd) # VLAN of bridge parent interface is always 1 # VLAN 1 is the default VLAN for all unlabeled packets cmd = f'bridge vlan add dev {ifname} vid 1 pvid untagged self' self._cmd(cmd) tmp = dict_search('member.interface', config) if tmp: for interface, interface_config in tmp.items(): # if interface does yet not exist bail out early and # add it later if interface not in interfaces(): continue # Bridge lower "physical" interface lower = Interface(interface) # If we've come that far we already verified the interface does # not have any addresses configured by CLI so just flush any # remaining ones lower.flush_addrs() # enslave interface port to bridge self.add_port(interface) if not interface.startswith('wlan'): # always set private-vlan/port isolation - this can not be # done when lower link is a wifi link, as it will trigger: # RTNETLINK answers: Operation not supported tmp = dict_search('isolated', interface_config) value = 'on' if (tmp != None) else 'off' lower.set_port_isolation(value) # set bridge port path cost if 'cost' in interface_config: value = interface_config.get('cost') lower.set_path_cost(value) # set bridge port path priority if 'priority' in interface_config: value = interface_config.get('priority') lower.set_path_priority(value) if int(vlan_filter): add_vlan = [] native_vlan_id = None allowed_vlan_ids= [] cur_vlan_ids = get_vlan_ids(interface) if 'native_vlan' in interface_config: vlan_id = interface_config['native_vlan'] add_vlan.append(vlan_id) native_vlan_id = vlan_id if 'allowed_vlan' in interface_config: for vlan in interface_config['allowed_vlan']: vlan_range = vlan.split('-') if len(vlan_range) == 2: for vlan_add in range(int(vlan_range[0]),int(vlan_range[1]) + 1): add_vlan.append(str(vlan_add)) allowed_vlan_ids.append(str(vlan_add)) else: add_vlan.append(vlan) allowed_vlan_ids.append(vlan) # Remove redundant VLANs from the system for vlan in list_diff(cur_vlan_ids, add_vlan): cmd = f'bridge vlan del dev {interface} vid {vlan} master' self._cmd(cmd) for vlan in allowed_vlan_ids: cmd = f'bridge vlan add dev {interface} vid {vlan} master' self._cmd(cmd) # Setting native VLAN to system if native_vlan_id: cmd = f'bridge vlan add dev {interface} vid {native_vlan_id} pvid untagged master' self._cmd(cmd) super().update(config)